The University of Southampton
University of Southampton Institutional Repository

Modeling blast failure of fibre metal laminates

Modeling blast failure of fibre metal laminates
Modeling blast failure of fibre metal laminates

Fibre metal laminates (FMLs) are multi-layered materials based on stacked arrangements of aluminium alloy and fibre-reinforced composite materials. Currently, FMLs such as GLARE (glass fibre/aluminium) and CALL (carbon fibre/aluminium) are attracting the interest of a number of aircraft manufacturers. For example, GLARE is being used in the manufacture of the upper fuselage of the A380, an aircraft that is capable of carrying up to 700 passengers. However, with such composite materials being more widely used, an on-going concern is the effect of foreign object impacts and blast on their mechanical properties. An example of impact is that of an aircraft underbelly or wing impacted at high velocity during take-off and landing by stones and other small debris from the runway. In addition blast can also occur in aircraft due to accident or terrorist attack. Composites undergo either impact or blast likely suffer both internal and external damages. In this paper, 3-D nonlinear finite element models were then developed to simulate blast failure of FMLs. Here, the effort was concentrated on modelling woven glass fibre reinforced composites, as simulation of aluminium alloys is relatively simple. In the current work, a damage evolution law is incorporated into the composite constitutive behaviour to obtain the blast response of FML panels. The implementation of the composite failure model into Abaqus/Explicit through a user-defined subroutine is discussed and validated. Also, the approximation of the blast impulse expressed by a surface pressure function is discussed and the limitations of this approximation are specified. The model is validated against the experimental results. Finally, summary remarks are drawn to highlight the major outcomes.

Blast, Damage evolution, Fibre metal laminates, Finite element, Woven composite
Sitnikova, E.
e0c2f901-24fe-43d0-88e8-76f415675104
Guan, Zhongwei
97fa111f-68dd-46a7-a2bc-81c5f88dbcf1
Cantwell, W. J.
5c47602d-c36a-488a-84ca-e800c3dd5339
Sitnikova, E.
e0c2f901-24fe-43d0-88e8-76f415675104
Guan, Zhongwei
97fa111f-68dd-46a7-a2bc-81c5f88dbcf1
Cantwell, W. J.
5c47602d-c36a-488a-84ca-e800c3dd5339

Sitnikova, E., Guan, Zhongwei and Cantwell, W. J. (2015) Modeling blast failure of fibre metal laminates. 20th International Conference on Composite Materials, ICCM 2015, , Copenhagen, Denmark. 19 - 24 Jul 2015.

Record type: Conference or Workshop Item (Paper)

Abstract

Fibre metal laminates (FMLs) are multi-layered materials based on stacked arrangements of aluminium alloy and fibre-reinforced composite materials. Currently, FMLs such as GLARE (glass fibre/aluminium) and CALL (carbon fibre/aluminium) are attracting the interest of a number of aircraft manufacturers. For example, GLARE is being used in the manufacture of the upper fuselage of the A380, an aircraft that is capable of carrying up to 700 passengers. However, with such composite materials being more widely used, an on-going concern is the effect of foreign object impacts and blast on their mechanical properties. An example of impact is that of an aircraft underbelly or wing impacted at high velocity during take-off and landing by stones and other small debris from the runway. In addition blast can also occur in aircraft due to accident or terrorist attack. Composites undergo either impact or blast likely suffer both internal and external damages. In this paper, 3-D nonlinear finite element models were then developed to simulate blast failure of FMLs. Here, the effort was concentrated on modelling woven glass fibre reinforced composites, as simulation of aluminium alloys is relatively simple. In the current work, a damage evolution law is incorporated into the composite constitutive behaviour to obtain the blast response of FML panels. The implementation of the composite failure model into Abaqus/Explicit through a user-defined subroutine is discussed and validated. Also, the approximation of the blast impulse expressed by a surface pressure function is discussed and the limitations of this approximation are specified. The model is validated against the experimental results. Finally, summary remarks are drawn to highlight the major outcomes.

This record has no associated files available for download.

More information

Published date: 1 January 2015
Additional Information: Publisher Copyright: © 2015 International Committee on Composite Materials. All rights reserved.
Venue - Dates: 20th International Conference on Composite Materials, ICCM 2015, , Copenhagen, Denmark, 2015-07-19 - 2015-07-24
Keywords: Blast, Damage evolution, Fibre metal laminates, Finite element, Woven composite

Identifiers

Local EPrints ID: 497641
URI: http://eprints.soton.ac.uk/id/eprint/497641
PURE UUID: debde363-202e-4265-bf4a-936802c34a62
ORCID for E. Sitnikova: ORCID iD orcid.org/0000-0001-6869-6751

Catalogue record

Date deposited: 28 Jan 2025 18:04
Last modified: 31 Jan 2025 03:15

Export record

Contributors

Author: E. Sitnikova ORCID iD
Author: Zhongwei Guan
Author: W. J. Cantwell

Download statistics

Downloads from ePrints over the past year. Other digital versions may also be available to download e.g. from the publisher's website.

View more statistics

Atom RSS 1.0 RSS 2.0

Contact ePrints Soton: eprints@soton.ac.uk

ePrints Soton supports OAI 2.0 with a base URL of http://eprints.soton.ac.uk/cgi/oai2

This repository has been built using EPrints software, developed at the University of Southampton, but available to everyone to use.

We use cookies to ensure that we give you the best experience on our website. If you continue without changing your settings, we will assume that you are happy to receive cookies on the University of Southampton website.

×