Near-wall and wake flow fields of a blunt trailing edge appended with structured and randomised porous media
Near-wall and wake flow fields of a blunt trailing edge appended with structured and randomised porous media
Porous media treatment is an effective method for passive flow and noise control of a bluff body, such as a cylinder and blunt trailing edge (TE). to minimise vortex shedding processes and aeroacoustic source generation. A prevailing issue in the study of porous media is that the near-wall and internal flow-fields of randomised porous media (such as metal foam or porous polyurcthancl can be difficult to analyse experimentally and rely on numerical simulations to elucidate the salient flow physics. To alleviate this problem, a structured porous TE (SPTE) was designed, following a published methodology for designing a structured porous coated cylinder. The SPTE possesses similar porous properties and has a regular lattice structure that allows for independent manipulation of porous properties, such as porosity and permeability. In this study, three types of TE were studied: a solid TE. an SPTE and a melamine foam TE with a randomised porous structure and similar porous properties to the SPTE. To quantify the acoustic emissions and efficacy of each TE. they were attached to an elliptical leading-edge flat plate and tested in an anechoic wind tunnel using a single microphone in the far-field. Experiments were also conducted using time-resolved planar particle image velocimetry in a water flume to quantify the near-wall and wake flow field statistics and how the different porous materials influence their passive flow and noise capability. The experiments revealed that the SPTE showed superior tonal noise reduction, relative to the randomised porous media and solid TEs. primarily due to the attenuation of vertical velocity fluctuations in the wake. Flow passage through the SPTE from the boundary layer into the wake is clearly observed, yet the randomised porous media possesses negligible flow passage. This flow communication through the SPTE modifies the development of the recirculation zone, reverse flow region and the interaction of the shear layers, thereby influencing the vertical velocity fluctuations in the wake and thus radiated far-field pressure.
Aeroacoustics, Passive flow control, Porous media
305-330
Arcondoulis, Elias J.G.
4e0c8bdf-1810-4d4e-b8e8-9ba9ccd6b746
Ragni, Daniele
e062b912-0281-40b8-85ea-fe45fd0e0b85
Fiscaletti, Daniele
26e42602-cda3-4cc8-8c76-49044b939fa7
Merino-Martinez, Roberto
bb96db09-0e45-4e83-a887-e4f369422589
13 February 2025
Arcondoulis, Elias J.G.
4e0c8bdf-1810-4d4e-b8e8-9ba9ccd6b746
Ragni, Daniele
e062b912-0281-40b8-85ea-fe45fd0e0b85
Fiscaletti, Daniele
26e42602-cda3-4cc8-8c76-49044b939fa7
Merino-Martinez, Roberto
bb96db09-0e45-4e83-a887-e4f369422589
Arcondoulis, Elias J.G., Ragni, Daniele, Fiscaletti, Daniele and Merino-Martinez, Roberto
(2025)
Near-wall and wake flow fields of a blunt trailing edge appended with structured and randomised porous media.
In,
Doolan, Con, Moreau, Danielle and Wills, Angus
(eds.)
Flinovia-Flow Induced Noise and Vibration Issues and Aspects-IV.
1 ed.
Springer Cham, .
(doi:10.1007/978-3-031-73935-4_15).
Record type:
Book Section
Abstract
Porous media treatment is an effective method for passive flow and noise control of a bluff body, such as a cylinder and blunt trailing edge (TE). to minimise vortex shedding processes and aeroacoustic source generation. A prevailing issue in the study of porous media is that the near-wall and internal flow-fields of randomised porous media (such as metal foam or porous polyurcthancl can be difficult to analyse experimentally and rely on numerical simulations to elucidate the salient flow physics. To alleviate this problem, a structured porous TE (SPTE) was designed, following a published methodology for designing a structured porous coated cylinder. The SPTE possesses similar porous properties and has a regular lattice structure that allows for independent manipulation of porous properties, such as porosity and permeability. In this study, three types of TE were studied: a solid TE. an SPTE and a melamine foam TE with a randomised porous structure and similar porous properties to the SPTE. To quantify the acoustic emissions and efficacy of each TE. they were attached to an elliptical leading-edge flat plate and tested in an anechoic wind tunnel using a single microphone in the far-field. Experiments were also conducted using time-resolved planar particle image velocimetry in a water flume to quantify the near-wall and wake flow field statistics and how the different porous materials influence their passive flow and noise capability. The experiments revealed that the SPTE showed superior tonal noise reduction, relative to the randomised porous media and solid TEs. primarily due to the attenuation of vertical velocity fluctuations in the wake. Flow passage through the SPTE from the boundary layer into the wake is clearly observed, yet the randomised porous media possesses negligible flow passage. This flow communication through the SPTE modifies the development of the recirculation zone, reverse flow region and the interaction of the shear layers, thereby influencing the vertical velocity fluctuations in the wake and thus radiated far-field pressure.
This record has no associated files available for download.
More information
Published date: 13 February 2025
Keywords:
Aeroacoustics, Passive flow control, Porous media
Identifiers
Local EPrints ID: 506979
URI: http://eprints.soton.ac.uk/id/eprint/506979
PURE UUID: 71b041cb-30d4-4e8b-b0f8-7ca924215301
Catalogue record
Date deposited: 24 Nov 2025 18:17
Last modified: 25 Nov 2025 03:20
Export record
Altmetrics
Contributors
Author:
Elias J.G. Arcondoulis
Author:
Daniele Ragni
Author:
Daniele Fiscaletti
Author:
Roberto Merino-Martinez
Editor:
Con Doolan
Editor:
Danielle Moreau
Editor:
Angus Wills
Download statistics
Downloads from ePrints over the past year. Other digital versions may also be available to download e.g. from the publisher's website.
View more statistics