The University of Southampton
University of Southampton Institutional Repository

Trade-offs in assigning active travel GPS trajectories to a geospatial infrastructure network

Trade-offs in assigning active travel GPS trajectories to a geospatial infrastructure network
Trade-offs in assigning active travel GPS trajectories to a geospatial infrastructure network

GPS trajectories, which reveal travellers’ preferences, can be utilised in various fields of transportation research. However, since GPS trajectories contain errors, they need to be matched to the links that were actually used in the real world. This task is particularly challenging for active travel trajectories, as they often have irregular movement patterns. To overcome this challenge, it is necessary to identify the spatial influences and characteristics of these trajectories. Therefore, this study compares a range of geometric matching methods using buffers and length overlapping proportion and assesses the trade-offs between these methods. The analysis was based on a case study centred on Winchester, UK and 4589 trajectories were assigned to an enhanced routable active travel infrastructure network. Buffers were set from 10 to 60 m in 5 m increments and 70% length overlapping proportion was applied. On overall matching results, as buffer sizes increased, the number of matched trajectories also increased linearly. The smaller buffer sizes showed that buffers smaller than 15 m are more likely to be affected by errors or to capture each side of a link separately. Meanwhile, the larger buffer sizes capture trajectories on adjacent links, so that the number of trips on a link tends to be overestimated. For further analysis, bearing criteria were also applied and the trend of the results was similar to the results obtained without bearing rules. Overall, the results suggest that a 30–35 m buffer is able to provide bi-directional coverage for large active travel GPS trajectories, while buffers smaller than 15 m are able to match trajectories to one side of a link but with a higher likelihood of error. The findings help understand the spatial trade-offs in assigning large active travel GPS trajectories and could be used to set the spatial extent of buffers in relevant research.

Active travel, Behaviour, Map-matching, geographic information systems, global positioning system, pedestrians
1751-956X
Baek, Changyeob
081190d4-4ddf-499d-9ef6-6ae4c9c452a2
Blainey, Simon
ee6198e5-1f89-4f9b-be8e-52cc10e8b3bb
Kaparias, Ioannis
e7767c57-7ac8-48f2-a4c6-6e3cb546a0b7
Young, Marcus
b7679822-1e61-47d0-b7bf-3e33a12fa8fe
Baek, Changyeob
081190d4-4ddf-499d-9ef6-6ae4c9c452a2
Blainey, Simon
ee6198e5-1f89-4f9b-be8e-52cc10e8b3bb
Kaparias, Ioannis
e7767c57-7ac8-48f2-a4c6-6e3cb546a0b7
Young, Marcus
b7679822-1e61-47d0-b7bf-3e33a12fa8fe

Baek, Changyeob, Blainey, Simon, Kaparias, Ioannis and Young, Marcus (2026) Trade-offs in assigning active travel GPS trajectories to a geospatial infrastructure network. IET Intelligent Transport Systems, 20 (1), [e70199]. (doi:10.1049/itr2.70199).

Record type: Article

Abstract

GPS trajectories, which reveal travellers’ preferences, can be utilised in various fields of transportation research. However, since GPS trajectories contain errors, they need to be matched to the links that were actually used in the real world. This task is particularly challenging for active travel trajectories, as they often have irregular movement patterns. To overcome this challenge, it is necessary to identify the spatial influences and characteristics of these trajectories. Therefore, this study compares a range of geometric matching methods using buffers and length overlapping proportion and assesses the trade-offs between these methods. The analysis was based on a case study centred on Winchester, UK and 4589 trajectories were assigned to an enhanced routable active travel infrastructure network. Buffers were set from 10 to 60 m in 5 m increments and 70% length overlapping proportion was applied. On overall matching results, as buffer sizes increased, the number of matched trajectories also increased linearly. The smaller buffer sizes showed that buffers smaller than 15 m are more likely to be affected by errors or to capture each side of a link separately. Meanwhile, the larger buffer sizes capture trajectories on adjacent links, so that the number of trips on a link tends to be overestimated. For further analysis, bearing criteria were also applied and the trend of the results was similar to the results obtained without bearing rules. Overall, the results suggest that a 30–35 m buffer is able to provide bi-directional coverage for large active travel GPS trajectories, while buffers smaller than 15 m are able to match trajectories to one side of a link but with a higher likelihood of error. The findings help understand the spatial trade-offs in assigning large active travel GPS trajectories and could be used to set the spatial extent of buffers in relevant research.

Text
IET Intelligent Trans Sys - 2026 - Baek - Trade‐Offs in Assigning Active Travel GPS Trajectories to a Geospatial - Version of Record
Available under License Creative Commons Attribution.
Download (31MB)

More information

Accepted/In Press date: 7 March 2026
e-pub ahead of print date: 19 March 2026
Keywords: Active travel, Behaviour, Map-matching, geographic information systems, global positioning system, pedestrians

Identifiers

Local EPrints ID: 510982
URI: http://eprints.soton.ac.uk/id/eprint/510982
ISSN: 1751-956X
PURE UUID: 04d57829-efb4-4511-98d8-5bcdc874c39a
ORCID for Simon Blainey: ORCID iD orcid.org/0000-0003-4249-8110
ORCID for Ioannis Kaparias: ORCID iD orcid.org/0000-0002-8857-1865
ORCID for Marcus Young: ORCID iD orcid.org/0000-0003-4627-1116

Catalogue record

Date deposited: 28 Apr 2026 16:48
Last modified: 29 Apr 2026 01:59

Export record

Altmetrics

Contributors

Author: Changyeob Baek
Author: Simon Blainey ORCID iD
Author: Marcus Young ORCID iD

Download statistics

Downloads from ePrints over the past year. Other digital versions may also be available to download e.g. from the publisher's website.

View more statistics

Atom RSS 1.0 RSS 2.0

Contact ePrints Soton: eprints@soton.ac.uk

ePrints Soton supports OAI 2.0 with a base URL of http://eprints.soton.ac.uk/cgi/oai2

This repository has been built using EPrints software, developed at the University of Southampton, but available to everyone to use.

We use cookies to ensure that we give you the best experience on our website. If you continue without changing your settings, we will assume that you are happy to receive cookies on the University of Southampton website.

×