The University of Southampton
University of Southampton Institutional Repository

Deposit structure and processes of sand deposition from a decelerating sediment suspension

Deposit structure and processes of sand deposition from a decelerating sediment suspension
Deposit structure and processes of sand deposition from a decelerating sediment suspension
Turbidity currents are notoriously difficult to monitor directly, therefore interpretation of their deposits forms the basis for much of our understanding of these flows. The deceleration rate of a flow is a potentially important yet poorly understood control on depositional processes. A series of experiments were conducted in an annular flume, in which fast (up to 3.5 m/s) and highly turbulent flows of sand (up to 250 µm) and water were decelerated at different rates and processes of deposition and deposit character analyzed. Previously poorly documented depositional processes were observed in the experiments. This is because the flows were initially unusually fast and of prolonged duration, with sustained periods of sediment fallout as the flow slowed down. The conditions in these flows are thus likely to be closer to those at the base of a waning turbidity current than is achieved in other relatively slow experimental flows. The collapse of high-concentration, moving, thin (< 5 mm) near-bed layers (laminar sheared layers) were an important mechanism by which the bed aggraded beneath these unsteady flows. At bed aggradation rates in excess of 0.44 mm/s the sequential collapse of laminar sheared layers produced a structureless, poorly graded and poorly sorted deposit (Bouma Ta). When bed aggradation rates fell below 0.44 mm/s the collapsing laminar sheared layers were reworked by turbulence to form planar laminae (Bouma Tb). These laminae are formed in a very different manner than the planar laminae attributed to bedwaves in previous open-channel flow experiments. Collapse of laminar sheared layers is therefore an alternative process for generating the Bouma Tb division. Inverse grading developed at the base of the deposits of slowly decelerated flows. This inverse grading was probably a result of grain sorting in a high-concentration layer that persisted at the base of the flow for many minutes prior to the onset of deposition.
1527-1404
529-547
Sumner, Esther J.
dbba4b92-89cc-45d9-888e-d0e87e5c10ac
Amy, Lawrence A.
857f581c-1529-424c-a948-91ab2fd476eb
Talling, Peter J.
1cbac5ec-a9f8-4868-94fe-6203f30b47cf
Sumner, Esther J.
dbba4b92-89cc-45d9-888e-d0e87e5c10ac
Amy, Lawrence A.
857f581c-1529-424c-a948-91ab2fd476eb
Talling, Peter J.
1cbac5ec-a9f8-4868-94fe-6203f30b47cf

Sumner, Esther J., Amy, Lawrence A. and Talling, Peter J. (2008) Deposit structure and processes of sand deposition from a decelerating sediment suspension. Journal of Sedimentary Research, 78 (8), 529-547. (doi:10.2110/jsr.2008.062).

Record type: Article

Abstract

Turbidity currents are notoriously difficult to monitor directly, therefore interpretation of their deposits forms the basis for much of our understanding of these flows. The deceleration rate of a flow is a potentially important yet poorly understood control on depositional processes. A series of experiments were conducted in an annular flume, in which fast (up to 3.5 m/s) and highly turbulent flows of sand (up to 250 µm) and water were decelerated at different rates and processes of deposition and deposit character analyzed. Previously poorly documented depositional processes were observed in the experiments. This is because the flows were initially unusually fast and of prolonged duration, with sustained periods of sediment fallout as the flow slowed down. The conditions in these flows are thus likely to be closer to those at the base of a waning turbidity current than is achieved in other relatively slow experimental flows. The collapse of high-concentration, moving, thin (< 5 mm) near-bed layers (laminar sheared layers) were an important mechanism by which the bed aggraded beneath these unsteady flows. At bed aggradation rates in excess of 0.44 mm/s the sequential collapse of laminar sheared layers produced a structureless, poorly graded and poorly sorted deposit (Bouma Ta). When bed aggradation rates fell below 0.44 mm/s the collapsing laminar sheared layers were reworked by turbulence to form planar laminae (Bouma Tb). These laminae are formed in a very different manner than the planar laminae attributed to bedwaves in previous open-channel flow experiments. Collapse of laminar sheared layers is therefore an alternative process for generating the Bouma Tb division. Inverse grading developed at the base of the deposits of slowly decelerated flows. This inverse grading was probably a result of grain sorting in a high-concentration layer that persisted at the base of the flow for many minutes prior to the onset of deposition.

Text
__userfiles.soton.ac.uk_Users_nsc_mydesktop_talling54751.pdf - Version of Record
Restricted to Repository staff only
Request a copy

More information

Published date: August 2008
Organisations: Geology & Geophysics, Marine Geoscience, National Oceanography Centre,Southampton

Identifiers

Local EPrints ID: 54751
URI: http://eprints.soton.ac.uk/id/eprint/54751
ISSN: 1527-1404
PURE UUID: 823fb7a0-ad9b-4ab8-92f7-99bf0ae93417

Catalogue record

Date deposited: 18 Jul 2008
Last modified: 15 Mar 2024 10:50

Export record

Altmetrics

Contributors

Author: Lawrence A. Amy
Author: Peter J. Talling

Download statistics

Downloads from ePrints over the past year. Other digital versions may also be available to download e.g. from the publisher's website.

View more statistics

Atom RSS 1.0 RSS 2.0

Contact ePrints Soton: eprints@soton.ac.uk

ePrints Soton supports OAI 2.0 with a base URL of http://eprints.soton.ac.uk/cgi/oai2

This repository has been built using EPrints software, developed at the University of Southampton, but available to everyone to use.

We use cookies to ensure that we give you the best experience on our website. If you continue without changing your settings, we will assume that you are happy to receive cookies on the University of Southampton website.

×