The University of Southampton
University of Southampton Institutional Repository

Preventing catastrophic failure in carbon-fibre-based composite tubular components under 3-point bending - an experimental study.

Preventing catastrophic failure in carbon-fibre-based composite tubular components under 3-point bending - an experimental study.
Preventing catastrophic failure in carbon-fibre-based composite tubular components under 3-point bending - an experimental study.
This thesis investigated methods of mitigating catastrophic brittle failure in carbon-fibre composite tubular structures under 3-point bending. Carbon fibre composites are a set of materials widely recognised for their stiffness-to-weight ratio and strength, yet their inherent brittleness presents significant challenges in safety-critical applications. Existing methods aiming to promote gradual failure and pseudo-ductility for safer applications make use of failure mechanisms such as delamination, which are not always feasible in real-world applications due to the lack of free-edges (where delamination typically initiates from) in closed cross-sectional composite components. This research aims to address these limitations by investigating alternative failure mechanisms and hybrid configurations to improve safety performance.
Key findings demonstrate that specimens designed for targeting shear failure, induced through configuration controls, significantly improved metrics such as maximum displacement, energy absorption, and post-failure load retention compared to specimens targeting the more prevalent compressive failure. The experimental study introduces novel strategies in an attempt to improve certain performance aspects of the shear failing specimens, including the application of reinforcement bands, hybridisation using unidirectional (UD) layers with S-Glass fibres, and varying the fibre volume fractions in the transverse direction of reinforcing plies. The application of reinforcement bands were shown to yield mixed results, with inconsistencies in the ability to induce or contain a shear crack. Hybrid configurations targeting shear failure have shown the ability to reduce load drops in non-catastrophic compressive failure circumstances. The method of reinforcing the internal material layers of the composite tube with 90-degree oriented UD plies was the first to mitigate catastrophic compressive failure entirely. This involves a complex sequence of failure modes initiated from a non-catastrophic shear crack, leading to localised delamination, matrix splitting of the internal 90-degree oriented plies whose fibres then reorientate towards the direction of loading, gradual delamination occurs leading to catastrophic axial splitting of the outermost 0-degree oriented plies.
Additional experimental studies have showcased the ability to create pseudo-ductile outcomes in specimens with sandwich hybrid configurations. A pseudo-ductile outcome was first thought possible by inducing dispersed fragmentation within the sandwich layers due to compressive stresses in the specimen. However, it was instead made possible through the containment of a shear crack to within the hybridising material plies only; thus leaving the internal carbon fibre core structure in-tact. In previous specimens observing shear failure initiation, the failure was observed to progress instantaneously throughout the UD plies orientated at 0-degrees, resulting in a significant load drop. Whereas these new pseudo-ductile specimens staggered the crack through the thickness of the structures, leading to only a drop in stiffness upon damage initiation and thus acting as a warning sign of impending failure.
Analytical and numerical methodologies validated the observed first-ply failure modes and informed the design of specimens to promote desirable failure outcomes. CT scans analyses revealed the mechanisms responsible for the gradual failure outcomes, including dispersed fibre fragmentation and matrix splitting, and those responsible for the pseudo-ductile failure outcomes. This work aims to establish foundational experimental data to be used for the development of analytical tools akin to Damage Mode Maps, tailored to composite tubes under bending, setting the stage for further advancements in safe and reliable composite structures.
Carbon-Fibre Reinforced Polymers (CFRPs), hybrid composite, gradual failure, Pseudo-ductility, pseudo-ductile composites, catastrophic failures
University of Southampton
Hill, Ellis Henry
e93d36fa-8089-4950-bb20-49d035d2b4ab
Hill, Ellis Henry
e93d36fa-8089-4950-bb20-49d035d2b4ab
Jalalvand, Meisam
21ef0df8-fc7c-4466-a2fc-ee98ed3408a2
Hamilton, Andrew
9088cf01-8d7f-45f0-af56-b4784227447c

Hill, Ellis Henry (2026) Preventing catastrophic failure in carbon-fibre-based composite tubular components under 3-point bending - an experimental study. University of Southampton, Doctoral Thesis, 272pp.

Record type: Thesis (Doctoral)

Abstract

This thesis investigated methods of mitigating catastrophic brittle failure in carbon-fibre composite tubular structures under 3-point bending. Carbon fibre composites are a set of materials widely recognised for their stiffness-to-weight ratio and strength, yet their inherent brittleness presents significant challenges in safety-critical applications. Existing methods aiming to promote gradual failure and pseudo-ductility for safer applications make use of failure mechanisms such as delamination, which are not always feasible in real-world applications due to the lack of free-edges (where delamination typically initiates from) in closed cross-sectional composite components. This research aims to address these limitations by investigating alternative failure mechanisms and hybrid configurations to improve safety performance.
Key findings demonstrate that specimens designed for targeting shear failure, induced through configuration controls, significantly improved metrics such as maximum displacement, energy absorption, and post-failure load retention compared to specimens targeting the more prevalent compressive failure. The experimental study introduces novel strategies in an attempt to improve certain performance aspects of the shear failing specimens, including the application of reinforcement bands, hybridisation using unidirectional (UD) layers with S-Glass fibres, and varying the fibre volume fractions in the transverse direction of reinforcing plies. The application of reinforcement bands were shown to yield mixed results, with inconsistencies in the ability to induce or contain a shear crack. Hybrid configurations targeting shear failure have shown the ability to reduce load drops in non-catastrophic compressive failure circumstances. The method of reinforcing the internal material layers of the composite tube with 90-degree oriented UD plies was the first to mitigate catastrophic compressive failure entirely. This involves a complex sequence of failure modes initiated from a non-catastrophic shear crack, leading to localised delamination, matrix splitting of the internal 90-degree oriented plies whose fibres then reorientate towards the direction of loading, gradual delamination occurs leading to catastrophic axial splitting of the outermost 0-degree oriented plies.
Additional experimental studies have showcased the ability to create pseudo-ductile outcomes in specimens with sandwich hybrid configurations. A pseudo-ductile outcome was first thought possible by inducing dispersed fragmentation within the sandwich layers due to compressive stresses in the specimen. However, it was instead made possible through the containment of a shear crack to within the hybridising material plies only; thus leaving the internal carbon fibre core structure in-tact. In previous specimens observing shear failure initiation, the failure was observed to progress instantaneously throughout the UD plies orientated at 0-degrees, resulting in a significant load drop. Whereas these new pseudo-ductile specimens staggered the crack through the thickness of the structures, leading to only a drop in stiffness upon damage initiation and thus acting as a warning sign of impending failure.
Analytical and numerical methodologies validated the observed first-ply failure modes and informed the design of specimens to promote desirable failure outcomes. CT scans analyses revealed the mechanisms responsible for the gradual failure outcomes, including dispersed fibre fragmentation and matrix splitting, and those responsible for the pseudo-ductile failure outcomes. This work aims to establish foundational experimental data to be used for the development of analytical tools akin to Damage Mode Maps, tailored to composite tubes under bending, setting the stage for further advancements in safe and reliable composite structures.

Text
Ellis Hill - PhD Thesis - Version of Record
Restricted to Repository staff only until 9 June 2027.
Available under License University of Southampton Thesis Licence.
Text
Final-thesis-submission-Examination-Mr-Ellis-Hill
Restricted to Repository staff only

More information

Published date: 2026
Keywords: Carbon-Fibre Reinforced Polymers (CFRPs), hybrid composite, gradual failure, Pseudo-ductility, pseudo-ductile composites, catastrophic failures

Identifiers

Local EPrints ID: 512038
URI: https://eprints.soton.ac.uk/id/eprint/512038
PURE UUID: 525ca998-5b1a-4781-8752-23d77819d06f
ORCID for Ellis Henry Hill: ORCID iD orcid.org/0000-0002-7059-3265
ORCID for Meisam Jalalvand: ORCID iD orcid.org/0000-0003-4691-6252
ORCID for Andrew Hamilton: ORCID iD orcid.org/0000-0003-4627-849X

Catalogue record

Date deposited: 15 Jun 2026 13:53
Last modified: 30 Oct 2026 03:15

Export record

Altmetrics

Contributors

Author: Ellis Henry Hill ORCID iD
Thesis advisor: Meisam Jalalvand ORCID iD
Thesis advisor: Andrew Hamilton ORCID iD

Download statistics

Downloads from ePrints over the past year. Other digital versions may also be available to download e.g. from the publisher's website.

View more statistics

Atom RSS 1.0 RSS 2.0

Contact ePrints Soton: eprints@soton.ac.uk

ePrints Soton supports OAI 2.0 with a base URL of https://eprints.soton.ac.uk/cgi/oai2

This repository has been built using EPrints software, developed at the University of Southampton, but available to everyone to use.

We use cookies to ensure that we give you the best experience on our website. If you continue without changing your settings, we will assume that you are happy to receive cookies on the University of Southampton website.

×