Items where Division is "Current Faculties > Faculty of Engineering and Physical Sciences > School of Engineering > Mechanical Engineering > Engineering Materials and Surface Engineering Group
Mechanical Engineering > Engineering Materials and Surface Engineering Group" and Year is 2015
 | Up a level |
Number of items: 20.
A
Porosity effect on residual flexural strength following low energy impact of carbon fibre composites - B. Arthurs, D.J. Bull, V. Arumugam, A.R. Chambers and C. Santulli
Type: Article
| 2015
| Item availability restricted.
C
A review of the changes of internal state related to high temperature creep of polycrystalline metals and alloys - B. Chen, P.E.J. Flewitt, A.C.F. Cocks and D.J. Smith
Type: Article
| 2015
| Item not available on this server.
Internal strains between grains during creep deformation of an austenitic stainless steel - B. Chen, J.N. Hu and Y.Q. Wang
Type: Article
| 2015
| Item not available on this server.
Role of the misfit stress between grains in the Bauschinger effect for a polycrystalline material - B. Chen, J.N. Hu and Y.Q. Wang
Type: Article
| 2015
| Item not available on this server.
Strengthening of an Al-Cu-Mg alloy processed by high-pressure torsion due to clusters, defects and defect-cluster complexes - Ying Chen, Nong Gao, Gang Sha, Simon P. Ringer and Marco J. Starink
Type: Article
| 2015
G
A case study quantifying stump/socket interface stresses of lower-limb amputees - Jianliang Gao, Piotr Laszczak, Michael Mcgrath, Jing Tang, Liudi Jiang, Dan Bader, David Moser, Saeed Zahedi, Joe McCarthy and Richard Bradbury
Type: Conference or Workshop Item
| 2015
| Item availability restricted.
Assessment of alignment effects on stump/socket interface and socket reaction moment using a lower-limb prosthetic simulator - Jianliang Gao, Michael Mcgrath, Piotr Laszczak, Jing Tang, Liudi Jiang, Dan Bader, David Moser and Richard Bradbury
Type: Article
| 2015
| Item availability restricted.
New compositional design for creating tough metallic glass composites with excellent work hardening - Junheng Gao, Joanne Sharp, Dikai Guan, W. Mark Rainforth and Iain Todd
Type: Article
| 2015
| Item not available on this server.
K
3D printing of smart materials: a review on recent progresses in 4D printing - Zhong Xun Khoo, Joanne Ee Mei Teoh, Yong Liu, Chee Kai Chua, Shoufeng Yang, Jia An, Kah Fai Leong and Wai Yee Yeong
Type: Article
| 2015
| Item not available on this server.
L
Effects of clinical interventions and everyday activities on the dynamic loading at the lower limb stump/socket interface - Piotr Laszczak, Liudi Jiang, David Moser, Michael Mcgrath, Jianliang Gao, Jing Tang, Dan Bader, Joe McCarthy, Richard Bradbury and Saeed Zahedi
Type: Conference or Workshop Item
| 2015
| Item availability restricted.
M
Type: Article
| 2015
Investigation into the effect of liner choice on interface stresses using a stump/socket simulator - Michael Mcgrath, Dan Bader, Jianliang Gao, Piotr Laszczak, Jing Tang, Joe McCarthy, Richard Bradbury, Ana Gallego, David Moser and Saeed Zahedi
Type: Conference or Workshop Item
| 2015
| Item availability restricted.
A lower-limb stump/socket interface simulator to aid assessment of clinical interventions - Michael Mcgrath, Jianliang Gao, Jing Tang, Piotr Laszczak, Liudi Jiang, Dan Bader, David Moser, Joe McCarthy, Richard Bradbury, Ana Gallego and Saeed Zahedi
Type: Article
| 2015
| Item availability restricted.
S
Predicting the quench sensitivity of Al-Zn-Mg-Cu alloys: a model for linear cooling and strengthening - M.J. Starink, B. Milkereit, Y. Zhang and P.A. Rometsch
Type: Article
| 2015
T
Use of gait lab 3D motion capture for dynamic assessment of amputee socket interface biomechanics with validation using TRIPS sensors systems – a case study - Jing Tang, Liudi Jiang, Dan Bader, Piotr Laszczak, Jianliang Gao, Michael Mcgrath, David Moser, Saeed Zahedi, Joe McCarthy and Richard Bradbury
Type: Conference or Workshop Item
| 2015
| Item availability restricted.
Use of gait lab 3D motion capture for dynamic assessment of amputee socket interface biomechanics – a preliminary study - Jing Tang, Liudi Jiang, Dan Bader, Joe McCarthry, Richard Bradbury, Saeed Zahedi and David Moser
Type: Article
| 2015
| Item availability restricted.
The effect of integrated microprocessor controlled knee-foot for inclined walking - a preliminary study on LiNX - Jing Tang, Liudi Jiang, David Moser and Saeed Zahedi
Type: Conference or Workshop Item
| 2015
| Item availability restricted.
Characterisation of dynamic couplings at lower limb residuum/socket interface using 3D motion capture - Jinghua Tang, Michael McGrath, Piotr Laszczak, Liudi Jiang, Dan L. Bader, David Moser and Saeed Zahedi
Type: Article
| 2015
| Item not available on this server.
V
Extrusion-based additive manufacturing of PEEK for biomedical applications - Mohammad Vaezi and Shoufeng Yang
Type: Article
| 2015
| Item not available on this server.
Y
On crack initiation in notched, cross-plied polymer matrix composites - Q.D. Yang, D. Schesser, M. Neiss, P. Wright, M.N. Mavrogordata, I. Sinclair, S.M. Spearing and B.N. Cox
Type: Article
| 2015
| Item not available on this server.