The University of Southampton
University of Southampton Institutional Repository

Items where Division is "Faculty of Engineering and the Environment > Engineering Sciences" and Year is 2011

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
[tool] Add To Shelf...
Group by: No Grouping | Authors/Creators | Item Type
Number of items: 84.

Achintha, Mithila and Nowell, David (2011) Eigenstrain modelling of residual stresses generated by laser shock peening At 11th International Conference on the Mechanical Behavior of Materials, Italy.

Al-Hajjjaj, Abdelwahid, Zamora, Blanca, Shah, Akeel A., Bavykin, Dmitry V., Reguera, Edilso and Walsh, Frank C. (2011) On the application of standard isotherms to hydrogen adsorption in microporous materials International Journal of Hydrogen Energy, 36, (22), pp. 14464-14476. (doi:10.1016/j.ijhydene.2011.07.110).

Armstrong, Lindsay-Marie, Gu, Sai and Luo, Kai H. (2011) CFD investigation into post-combustion carbon capture At Institute of Physics: Current Research in Combustion Meeting, United Kingdom.

Armstrong, Lindsay-Marie, Gu, Sai and Luo, Kai H. (2011) Eulerian-eulerian modeling of the desulphurisation process in a coal bubbling fluidised bed At UK Heat Transfer Conference, United Kingdom. 30 Aug - 01 Sep 2011. 12 pp.

Armstrong, Lindsay-Marie, Gu, Sai and Luo, Kai H. (2011) Three-dimensional multiphase modeling of the desulphurisation process in a coal bubbling fluidised bed At Institute of Physics: Current Research in Combustion Meeting, United Kingdom.

Austin, T.P., Scott, Mark, Johnston, S.J., Reed, Philippa A.S. and Takeda, Kenji (2011) EP2DC - an EPrints module for linking publications and data At Ensuring long-term preservation and adding value to scientific and technical data, France. 15 - 17 Nov 2011.

Balla, Tobias (2011) Modelling of microelectronic processes and materials University of Southampton, Faculty of Engineering and the Environment, Doctoral Thesis , 206pp.

Belal, Mohammad and Newson, Trevor P. (2011) Performance comparison between Raman and Brillouin intensity based sub metre spatial resolution temperature compensated distribued strain sensor At European Conference on Lasers and Electro-Optics (CLEO/Europe-EQEC 2011), Germany. 22 - 26 May 2011.

Berry, Sam A., Gates, James C. and Brocklesby, William S. (2011) Direct spatial-temporal discrimination of modes in a photonic lightwave circuit using photon scanning tunnelling microscopy At The European Conference on Lasers and Electro-Optics (CLEO/Europe), Germany. 22 - 26 May 2011. (doi:10.1109/CLEOE.2011.5943004).

Branford, S., Coceal, O., Thomas, T. G. and Belcher, S. E. (2011) Dispersion of a point-source release of a passive scalar through an urban-like array for different wind directions Boundary-Layer Meteorology, 139, (3), pp. 367-394. (doi:10.1007/s10546-011-9589-1).

Bressloff, Neil W., Pant, Sanjay, Limbert, Georges and Curzen, Nick (2011) Multi-objective design optimisation of coronary stents Biomaterials, 32, (31), pp. 7755-7773. (doi:10.1016/j.biomaterials.2011.07.059). (PMID:21821283).

Brown, Mark, White, Wendy, Takeda, Kenji, Coles, Simon, Carr, Les, Earl, Graeme, Frey, Jeremy, Hancock, Peter and Styles, Clint (2011) Institutional data management blueprint final report University of Southampton , Southampton, GB

Bruchmuller, Jorn (2011) Modelling the degradation of particles in fluidised beds University of Southampton, School of Engineering Sciences, Doctoral Thesis , 176pp.

Bull, D.J., Sinclair, I., Spearing, S.M. and Helfen, L. (2011) Composite laminate impact damage assessment by high resolution 3D X-ray tomography and laminography At ICCM 18: 18th International Conference on Composite Materials, Korea, Republic of. 21 - 26 Aug 2011. 6 pp.

Cao, Y., Wang, Y.B., Figueiredo, R.B., Chang, L., Liao, X.Z., Kawasaki, M., Zheng, W., Ringer, S.P., Langdon, T.G. and Zhu, Y.T. (2011) Three-dimensional shear strain patterns induced by high-pressure torsion and their impact on hardness evolution Acta Materialia, 59, (10), pp. 3903-3914. (doi:10.1016/j.actamat.2011.03.015).

Capretto, Lorenzo (2011) Formation of nanostructured biomaterials in lab-on-a-chip microsystems University of Southampton, School of Engineering Sciences, Doctoral Thesis , 208pp.

Chen, Y.G., Price, W.G. and Temarel, P. (2011) An anti-diffusive volume of fluid method for interfacial fluid flows International Journal for Numerical Methods in Fluids, 68, (3), pp. 341-359. (doi:10.1002/fld.2509).

Chen, Zhi-Min (2011) A vortex based panel method for potential flow simulation around a hydrofoil Journal of Fluids and Structures, 28, pp. 378-391. (doi:10.1016/j.jfluidstructs.2011.10.003).

Cheung, Julie, Scanlan, James and Wong, James et al. (2011) Application of value-driven design to commercial aero-engine systems Journal of Aircraft, 49, (3), pp. 688-702. (doi:10.2514/1.C031319).

Collingwood, C. (2011) Investigation of a miniature differential ion thruster University of Southampton, School of Engineering Sciences, Doctoral Thesis , 253pp.

Crammond, G., Boyd, S.W. and Dulieu-Barton, J.M. (2011) Speckle pattern characterisation for high resolution digital image correlation Applied Mechanics and Materials, 70, pp. 261-266. (doi:10.4028/www.scientific.net/AMM.70.261).

Crump, D.A., Dulieu-Barton, J.M. and Longana, M.L. (2011) Approaches to synchronise conventional measurements with optical techniques at high strain rates Applied Mechanics and Materials, 70, pp. 75-80. (doi:10.4028/www.scientific.net/AMM.70.75).

Dadd, George M., Hudson, Dominic A. and Shenoi, R.A. (2011) Determination of kite forces using three-dimensional flight trajectories for ship propulsion Renewable Energy, 36, (10), pp. 2667-2678. (doi:10.1016/j.renene.2011.01.027).

Dulieu-Barton, J.M., (2011) Measurement of thermomechanical coupling and its application in stress and damage analysis Burguete, R.L., Lucas, M., Patterson, E.A. and Quinn, S. (eds.) In Advances in Experimental Mechanics VIII. Trans Tech., pp. 28-32. (doi:10.4028/www.scientific.net/AMM.70.28).

Figueiredo, Roberto B., Aguilar, Maria Teresa P., Cetlin, Paulo R. and Langdon, Terence G. (2011) Deformation heterogeneity on the cross-sectional planes of a magnesium alloy processed by high-pressure torsion Metallurgical and Materials Transactions A, 42, (10), pp. 3013-3021. (doi:10.1007/s11661-011-0609-z).

Figueiredo, Roberto B. and Langdon, T.G. (2011) Development of structural heterogeneities in a magnesium alloy processed by high-pressure torsion Materials Science and Engineering: A, 528, (13-14), pp. 4500-4506. (doi:10.1016/j.msea.2011.02.048).

Fruehmann, R.K., Wang, W., Dulieu-Barton, J.M. and Quinn, S. (2011) The application of thermoelastic stress analysis to evaluate debond damage in composite sandwich structures Applied Mechanics and Materials, 70, pp. 470-475. (doi:10.4028/www.scientific.net/AMM.70.470).

Griffiths, G. and McPhail, S.D. (2011) AUVs for Depth and Distance: Autosub6000 and Autosub Long Range Sea Technology, 52, (12), pp. 27-30.

Hussain, Babar (2011) Protection of distribution networks with distributed generation University of Southampton, Faculty of Engineering and the Environment, Doctoral Thesis , 159pp.

Jiang, L., Spearing, S.M., Monclus, M.A. and Jennett, N.M. (2011) Formation and mechanical characterisation of SU8 composite films reinforced with horizontally aligned and high volume fraction CNTs Composites Science and Technology, 71, (10), pp. 1301-1308. (doi:10.1016/j.compscitech.2011.04.017).

Kear, Gareth, Shah, Akeel and Walsh, Frank C. (2011) Development of the all-vanadium redox flow battery for energy storage: a review of technological, financial and policy aspects International Journal of Energy Research (doi:10.1002/er.1863).

Kiaee, Mahdi, Chade, Daniel, Cruden, Andrew and Infield, David (2011) Design of a system to investigate the performance of alkaline electrolysers during operation with intermittency of wind power At 4th World Hydrogen Technologies Convention Conference, WHTC 2011, United Kingdom. 14 - 16 Sep 2011.

Kiaee, Mahdi, Cruden, Andrew and Infield, David (2011) Demand side management using alkaline electrolysers within the UKGDS simulation network At The 21st International Conference and Exhibition on Electricity Distribution, CIRED 2011, Germany. 06 - 09 Jun 2011.

Knittel, Andreas (2011) Micromagnetic simulations of three dimensional core-shell nanostructures University of Southampton, School of Engineering Sciences, Doctoral Thesis , 220pp.

Langdon, Terence G., (2011) Developing superplasticity through severe plastic deformation Horita, Zenji (ed.) In Production of Multifunctional Materials Using Severe Plastic Deformation. Kyushu University Press., pp. 58-59.

Lapinski, Jacek, Pletcher, Derek and Walsh, Frank C. (2011) The electrodeposition of nickel–graphite composite layers Surface and Coatings Technology, 205, (21-22), pp. 5205-5209. (doi:10.1016/j.surfcoat.2011.05.030).

Leekitwattana, M. (2011) Analysis of an alternative topology for steel-concrete-steel sandwich beams incorporating inclined shear connectors University of Southampton, Faculty of Engineering and the Environment, Doctoral Thesis , 243pp.

Leung, P.K. (2011) Development of a zinc-cerium redox flow battery University of Southampton, Faculty of Engineering and the Environment, Doctoral Thesis , 352pp.

Leung, P.K., Ponce de Leon, C. and Walsh, F.C. (2011) An undivided zinc-cerium redox flow battery operating at room temperature Electrochemistry Communications, 13, (8), pp. 770-7733. (doi:10.1016/j.elecom.2011.04.011).

Leung, P.K., Ponce-de-León, C., Low, C.T.J. and Walsh, F.C. (2011) Zinc deposition and dissolution in methanesulfonic acid onto a carbon composite electrode as the negative electrode reactions in a hybrid redox flow battery Electrochimica Acta, 56, (18), pp. 6536-6546. (doi:10.1016/j.electacta.2011.04.111).

Li, Xiaohong, Pletcher, Derek and Walsh, Frank C. (2011) Electrodeposited lead dioxide coatings Chemical Society Reviews, 40, (7), pp. 3879-3894. (doi:10.1039/c0cs00213e).

Low, C.T.J., de la Toba Corral, M. and Walsh, F.C. (2011) Anodising of titanium in methanesulphonic acid to form titanium dioxide nanotube arrays Transactions of the Institute of Metal Finishing, 89, (1), pp. 44-50. (doi:10.1179/174591911X12953503084903).

Luo, Q., Wang, S.C., Zhou, Z. and Chen, L. (2011) Structure characterization and tribological study of magnetron sputtered nanocomposite nc-TiAlV(N, C)/a-C coatings Journal of Materials Chemistry, 21, pp. 9746-9756. (doi:10.1039/C1JM10707K).

Mbuya, Thomas O. (2011) Analysis of microstructure and fatigue micromechanisms in cast aluminium piston alloys University of Southampton, Faculty of Engineering and the Environment, Doctoral Thesis , 289pp.

McBride, J.W., Spearing, S.M., Jiang, Liudi and Chianrabutra, Chamaporn (2011) Gold coated carbon-nanotube surfaces as low force electrical contacts for MEMS devices: part II, fine transfer mechanism At 57th IEEE Holm Conference on Electrical Contacts, United States. 11 - 14 Sep 2011. , pp. 1-6. (doi:10.1109/HOLM.2011.6034800).

McBride, J.W., Spearing, S.M., Jiang, Liudi and Chianrabutra, Chamaporn (2011) Gold coated carbon-nanotube surfaces as low force electrical contacts for MEMS devices: Part II, fine transfer mechanisms At 2011 IEEE 57th Holm Conference on Electrical Contacts (Holm), United States. 11 Aug - 14 Sep 2011. , pp. 1-6. (doi:10.1109/HOLM.2011.6034800).

Molina, J. and Zhang, X. (2011) Aerodynamics of a heaving airfoil in ground effect AIAA Journal, 49, (6), pp. 1168-1179. (doi:10.2514/1.J050369).

Ni, S., Wang, Y., Liao, X., Li, H., Figueiredo, R., Ringer, S., Langdon, T. and Zhu, Y. (2011) Effect of grain size on the competition between twinning and detwinning in nanocrystalline metals Physical Review B, 84, (23), 235401-[4pp]. (doi:10.1103/PhysRevB.84.235401).

Ni, S., Wang, Y., Liao, X.Z., Figueiredo, Roberto B., Li, H.Q., Zhao, Y.H., Lavernia, E.J., Ringer, S.P., Langdon, T.G. and Zhu, Y.T. (2011) Strain softening in nanocrystalline Ni–Fe alloy induced by large HPT revolutions Materials Science and Engineering: A, 528, (13-14), pp. 4807-4811. (doi:10.1016/j.msea.2011.03.007).

Nobakhti, S. and Aghdam, M.M. (2011) Static analysis of rectangular thick plates resting on two-parameter elastic boundary strips European Journal of Mechanics - A/Solids, 30, (3), pp. 442-448. (doi:10.1016/j.euromechsol.2010.12.016).

Parel, Thomas, Fang, Liping, Chu, Xishu, Danos, Lefteris and Markvart, Tom (2011) Comparison of fluorescent down-shifting layers for increasing the efficiency of CdS/CdTe solar cells At 7th Photovoltaic Science, Applications and Technology Conference C93 (PVSAT-7), United Kingdom. 06 - 08 Apr 2011. 3 pp, pp. 87-89.

Parel, Thomas S., Rotaru, Mihai D., Sykulski, Jan K. and Hearn, Grant E. (2011) Optimisation of a tubular linear machine with permanent magnets for wave energy extraction COMPEL: The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, 30, (3), pp. 1056-1068. (doi:10.1108/03321641111110997).

Pearce, Mark, Takeda, Kenji and Hudson, Dominic A. (2011) Prediction of ship motions for a Wigley hull using SPH At 6th International Smoothed Particle Hydrodynamics European Research Interest Community (SPHERIC) Workshop, Germany.

Penchaliah, R., Harvey, T.J., Wood, R.J.K., Nelson, K. and Powrie, H. (2011) The effects of diesel contaminants on tribological performance on sliding steel on steel contacts Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology, 225, (8), pp. 779-797. (doi:10.1177/1350650111409825).

Pletcher, Derek and Li, Xiaohong (2011) Prospects for alkaline zero gap water electrolysers for hydrogen production International Journal of Hydrogen Energy, 36, (23), pp. 15089-15104. (doi:10.1016/j.ijhydene.2011.08.080).

Ponce de Leon, Carlos, Kulak, A., Williams, S., Merino-Jimenez, I. and Walsh, F.C. (2011) Improvements in direct borohydride fuel cells using three-dimensional electrodes Catalysis Today, 170, (1), pp. 148-154. (doi:10.1016/j.cattod.2011.03.010).

Ranga Dinesh, K.K.J., Jenkins, K.W and Kirkpatrick, M.P (2011) Intermittency and swirl dynamics of turbulent swirling flames At 5th European Combustion Meeting (ECM2011), United Kingdom. 28 Jun - 01 Jul 2011. 6 pp.

Ranga Dinesh, K.K.J., Jiang, X and van Oijen, J.A (2011) Direct numerical simulation of hydrogen impinging jet flame using flamelet generated manifold reduction At 4th World Hydrogen Technologies Convention (WHTC2011), United Kingdom. 14 - 16 Sep 2011. 6 pp.

Recio, F.J., Herrasti Gonzalez, P., Sires, I., Kulak, A.N., Bavykin, D.V., Ponce de Leon, C. and Walsh, F.C. (2011) The preparation of PbO2 coatings on reticulated vitreous carbon for the electro-oxidation of organic pollutants Electrochimica Acta, 56, (14), pp. 5158-5165. (doi:10.1016/j.electacta.2011.03.054).

Robinson, A.F., Dulieu-Barton, J.M., Quinn, S. and Burguete, R.L., (2011) The effect of plastic deformation on the thermoelastic constant and the potential to evaluate residual stress Burguete, R.L., Lucas, M., Patterson, E.A. and Quinn, S. (eds.) In Advances in Experimental Mechanics VIII. Trans Tech., pp. 458-463. (doi:10.4028/www.scientific.net/AMM.70.458).

Robinson, Andrew Ferrand (2011) Assessment of residual stress using thermoelastic stress analysis University of Southampton, School of Engineering Sciences, Doctoral Thesis , 245pp.

Rodriguez, P., Garcia-Araez, N., Koverga, None, Frank, S. and Koper, M.T.M. (2011) CO electroxidation on gold in alkaline media: a combined electrochemical, spectroscopic and DFT study At Faraday Discussion 152: Gold, United Kingdom. 04 - 06 Jul 2011.

Rogers, H.L., Carpenter, L.G., Ambran, S., Sima, C., Wales, D.J., Parker, R.M., Holmes, C., Gates, J.C. and Smith, P.G.R. (2011) Direct grating writing: single-step Bragg grating and waveguide fabrication for telecommunications At IONS NA-3, United States. 13 - 15 Oct 2011.

Rosser, Matthew D., Haris, Parves I., Ankrett, Dyan N. and Konje, Justin C. (2011) The emerging role of epigenetics and miRNAs in endometriosis Expert Review of Obstetrics & Gynecology, 6, (4), pp. 431-450. (doi:10.1586/eog.11.32).

Sarkar, Riddhiman, Concistre, Maria, Johannessen, Ole G., Beckett, Peter, Denning, Mark, Carravetta, Marina, al-Mosawi, Maitham, Beduz, Carlo, Yang, Yifeng and Levitt, Malcolm H. (2011) An NMR thermometer for cryogenic magic-angle spinning NMR: the spin-lattice relaxation of 127I in cesium iodide Journal of Magnetic Resonance, 212, (2), pp. 460-463. (doi:10.1016/j.jmr.2011.08.021).

Scott, A.E., Mavrogordato, Mark N., Wright, Peter, Sinclair, I. and Spearing, S.M. (2011) In situ fibre fracture measurement in carbon–epoxy laminates using high resolution computed tomography Composites Science and Technology, 71, (12), pp. 1471-1477. (doi:10.1016/j.compscitech.2011.06.004).

Scott, Anna (2011) Analysis of a hybrid composite pressure vessel using multi-scale computed tomography techniques University of Southampton, School of Engineering Sciences, Doctoral Thesis , 165pp.

Shapiro, Karen, Achintha, Mithila, Withers, Phillip and Nowell, David (2011) Optimising LSP conditions and modelling the geometric effects on residual stress At 3rd International Conference on Laser Peening, Japan. 11 - 14 Oct 2011.

Shen, D.K (2011) The pyrolytic mechanism of the main components in woody biomass and their interactions University of Southampton, Faculty of Engineering and the Environment, Doctoral Thesis , 190pp.

Singh, R, Shah, A.A., Potter, A., Clarkson, B., Creeth, A., Downs, C. and Walsh, F.C. (2011) Performance and analysis of a novel polymer electrolyte membrane fuel cell using a solution based redox mediator Journal of Power Sources, 201, pp. 159-163. (doi:10.1016/j.jpowsour.2011.10.078).

Srinivasan, Prasanna and Spearing, Simon Mark (2011) Modeling of thermally driven resonance at multiscales Journal of Heat Transfer, 133, (11), Autumn Issue, p. 112402. (doi:10.1115/1.4004359).

Stevar, M.S.P. and Vorobev, Anatoliy (2011) Dissolution behaviour of a binary mixture in a capillary tube At 16th European Symposium on Improved Oil Recovery, United Kingdom. 12 - 14 Apr 2011. 13 pp.

Sultan, M.T.H., Worden, K., Pierce, S.G., Staszewski, W.J., Hickey, D., Dulieu-Barton, J.M. and Hodzic, A (2011) On impact damage detection and quantification for CFRP laminates using structural response data only Mechanical Systems and Signal Processing, 25, (8), pp. 3135-3152. (doi:10.1016/j.ymssp.2011.05.014).

Terrazas-Rodríguez, J.E., Gutiérrez-Granados, S., Alatorre-Ordaz, M.A., Ponce de Leon, C. and Walsh, F.C. (2011) A comparison of the electrochemical recovery of palladium using a flat plate flow-by reactor and a rotating cylinder electrode reactor Electrochimica Acta, 56, (25) (doi:10.1016/j.electacta.2011.08.021).

Townsend, Nicholas C. and Shenoi, Ramanand A. (2011) Gyrostabilizer vehicular technology Applied Mechanics Reviews, 64, (1), 010801 -[14pp]]. (doi:10.1115/1.4004837).

Vaezi, Mohammad and Chua, Chee Kai (2011) Effects of layer thickness and binder saturation level parameters on 3D printing process International Journal of Advanced Manufacturing Technology, 53, (1-4), pp. 275-284. (doi:10.1007/s00170-010-2821-1).

Vaezi, Mohammad, Safaeian, Davood and Chua, Chee Kai (2011) Gas turbine blade manufacturing by use of epoxy resin tooling and silicone rubber molding techniques Rapid Prototyping Journal, 17, (2), pp. 107-115. (doi:10.1108/13552541111113853).

Vaezi, Mohammad, Safaeian, Davood and Shakeri, Mohsen (2011) Integration of reverse engineering and rapid technologies for rapid investment casting of gas turbine blades Virtual and Physical Prototyping, 6, (4), pp. 225-239. (doi:10.1080/17452759.2011.631173).

Veres, S.M., Molnar, L, Lincoln, Nicholas K. and Morice, Colin (2011) Autonomous vehicle control systems – a review of decision making Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 225, (2), pp. 155-195. (doi:10.1177/2041304110394727).

Wang, Y.B., Qu, D.D., Wang, X.H., Cao, Y., Liao, X.Z., Kawasaki, M., Ringer, S.P., Shan, Z.W., Langdon, T.G. and Shen, J. (2011) Introducing a strain-hardening capability to improve the ductility of bulk metallic glasses via severe plastic deformation Acta Materialia, 60, (1), pp. 253-260. (doi:10.1016/j.actamat.2011.09.026).

Waugh, R.C., Dulieu-Barton, J.M. and Quinn, S., (2011) Pulse phase thermography and its application to kissing defects in adhesively bonded joints Burguete, R.L., Lucas, M.L., Patterson, E.A. and Quinn, S. (eds.) In Advances in Experimental Mechanics VII. Trans Tech., pp. 369-374. (doi:10.4028/www.scientific.net/AMM.70.369).

Whitton, Michael and Takeda, Kenji (2011) Data management questionnaire results: IDMB Project University of Southampton 16pp. , Southampton, GB

Wright, Peter Michael (2011) Investigation of damage in laminated carbon fibre composites using high resolution computed tomography University of Southampton, School of Engineering Sciences, Doctoral Thesis , 167pp.

Young, E., Yang, Y. and Min, H. (2011) Quench characteristics of a Cu-Stabilized 2G HTS conductor IEEE Transactions on Applied Superconductivity, 21, (3), pp. 1-4. (doi:10.1109/TASC.2010.2083615).

This list was generated on Sun Apr 9 16:32:24 2017 BST.
Atom RSS 1.0 RSS 2.0

Contact ePrints Soton: eprints@soton.ac.uk

ePrints Soton supports OAI 2.0 with a base URL of http://eprints.soton.ac.uk/cgi/oai2

This repository has been built using EPrints software, developed at the University of Southampton, but available to everyone to use.

We use cookies to ensure that we give you the best experience on our website. If you continue without changing your settings, we will assume that you are happy to receive cookies on the University of Southampton website.

×