Items where Division is "Faculty of Engineering and the Environment" and Year is 2010

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
[tool] Add To Shelf...
Group by: No Grouping | Authors/Creators | Item Type
Jump to: B | C | F | J | K | L | M | P | R | S | T | W | Y
Number of items: 26.


Bardet, Raphaël Régis (2010) A life cycle assessment method for alternative material selection strategies in boat structures University of Southampton, Engineering and the Environment, Doctoral Thesis , 227pp.

Bergomi, Marzio, Cugnoni, Joël, Anselm Wiskott, H.W., Schneider, Philipp, Stampanoni, Marco, Botsis, John and Belser, Urs C. (2010) Three-dimensional morphometry of strained bovine periodontal ligament using synchrotron radiation-based tomography Journal of Anatomy, 217, (2), pp. 126-134. (doi:10.1111/j.1469-7580.2010.01250.x). (PMID:20557399).

Blake, A., O’Loughlin, C. and Gaudin, C., (2010) Setup following keying of plate anchors assessed through centrifuge tests in kaolin clay White, D. and Gourvenec, S. (eds.) At 2nd International Symposium on Frontiers in Offshore Geotechnics. , pp. 705-710. (doi:10.1201/b10132-100).

Box, S. and Waterson, B.J. (2010) Comparison of signalized junction control strategies that use localization probe data At RTIC 2010: Better transport through technology, United Kingdom. 25 - 27 May 2010. (doi:10.1049/cp.2010.0387).


Chu, Zengyong, He, Rongan, Zhang, Xiaobin, Jiang, Zheng, Cheng, Haifeng, Wang, Yingde and Li, Xiaodong (2010) Fabrication of porous SiC(y) (core)/C (shell) fibres using a hybrid precursor of polycarbosilane and pitch Carbon, 48, (7), pp. 2115-2118. (doi:10.1016/j.carbon.2010.01.064).


Forrester, Alexander I. J. (2010) Black-box calibration for complex systems simulation Proceedings of the Royal Society Series A, 368, (1924), pp. 3567-3579. (doi:10.1098/rsta.2010.0051).


Jiang, Z., Xiao, T., Kuznetsov, V.L. and Edwards, P.P. (2010) Turning carbon dioxide into fuel Philosophical Transactions of The Royal Society A: Mathematical Physical and Engineering Sciences, 368, (1923), pp. 3343-3364. (doi:10.1098/rsta.2010.0119).

Jiang, Zheng, Yang, F., Yang, G.D., Kong, L.A., Jones, M.O., Xiao, T.C. and Edwards, P.P. (2010) The hydrothermal synthesis of BiOBr flakes for visible-light-responsive photocatalytic degradation of methyl orange Journal of Photochemistry and Photobiology A: Chemistry, 212, (1), pp. 8-13. (doi:10.1016/j.jphotochem.2010.03.004).

Jiang, Zheng, Yu, J.J., Cheng, J., Mao, T.C., Jones, M.O., Hao, Z.P. and Edwards, P.P. (2010) Catalytic combustion of methane over mixed oxides derived from Co-Mg/Al ternary hydrotalcites Fuel Processing Technology, 91, (1), pp. 97-102. (doi:10.1016/j.fuproc.2009.08.023).


Kanagasabai, Sasokanthan (2010) Three dimensional numerical modelling of rows of discrete piles used to stabilise large landslides University of Southampton, Engineering and the Environment, Doctoral Thesis , 217pp.

Kitchainukul, Waraporn (2010) The use of fly ash to stabilise low concentrations of mercury in the environment University of Southampton, Engineering and the Environment, Doctoral Thesis , 104pp.


Lichter, M., Vafeidis, A.T., Nicholls, R.J. and Kaiser, G. (2010) Exploring data-related uncertainties in analyses of land area and population in the “Low-Elevation Coastal Zone” (LECZ) Journal of Coastal Research, 27, (4), 757 -768. (doi:10.2112/JCOASTRES-D-10-00072.1).


McDonald, A.D. and Walker, S.J.I. (2010) Use of multiple SMA wires for morphing of inflatable wings In Proceedings of the ASME 2010 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. American Society of Mechanical Engineers..


Papadimitriou, Costas, Fritzen, Claus-Peter, Kraemer, Peter and Ntotsios, Evangelos (2010) Fatigue predictions in entire body of metallic structures from a limited number of vibration sensors using Kalman filtering Structural Control & Health Monitoring, pp. 1-20. (doi:10.1002/stc.395).

Papafragkou, Anastasios (2010) Urban carbon and energy analysis: calculation of energy flows and emissions from residential housing clusters and assessment of sustainable energy options University of Southampton, School of Civil Engineering and the Environment, Doctoral Thesis , 305pp.


Rajinikanth, V., Venkateswarlu, K., Sen, M.K., Das, M., Alhajeri, S.N. and Langdon, T.G. (2010) Influence of scandium on an Al-2% Si alloy processed by high-pressure torsion Materials Science and Engineering: B, 528, (3), pp. 1702-1706. (doi:10.1016/j.msea.2010.10.102).

Richardson, E.S., Sankaran, R., Grout, R.W. and Chen, J.H. (2010) Numerical analysis of reaction-diffusion effects on species mixing rates in turbulent premixed methane-air combustion Combustion and Flame, 157, (3), pp. 506-515. (doi:10.1016/j.combustflame.2009.11.007).

Rollinson, J., Rees-White, T., Barker, J.A. and Beaven, R.P. (2010) A single borehole dilution technique to measure the hydrogeological properties of saturated landfilled waste At Waste 2010 Conference, United Kingdom. 28 - 29 Sep 2010. 8 pp, pp. 105-112.


Schneider, Philipp, Meier, Matias, Wepf, Roger and Müller, Ralph (2010) Towards quantitative 3D imaging of the osteocyte lacuno-canalicular network Bone, 47, (5), pp. 848-858. (doi:10.1016/j.bone.2010.07.026).


Thomsen, O.T. and Kratmann, K.K. (2010) Experimental characterisation of parameters controlling the compressive failure of pultruded unidirectional carbon fibre composites In, Mines, R.A.W. and Dulieu-Barton, J.M. (eds.) Advances in Experimental Mechanics VII. Zurich, Switzerland, Trans Tech pp. 15-22. (Applied Mechanics and Materials, 24-25). (doi:10.4028/

Toal, David J.J., Bressloff, N.W., Keane, A.J. and Holden, C.M.E (2010) Geometric filtration using proper orthogonal decomposition for aerodynamic design optimization AIAA Journal, 48, (5), pp. 916-928. (doi:10.2514/1.41420).

Tutty, O.R. (2010) A simple redistribution vortex method (with accurate body forces) Pre-print, pp. 1-27.


Walker, S.J.I., Santos, S., McDonald, A.D. and Aglietti, G.S. (2010) Development of morphing deployables for space applications At 61st International Astronautical Congress, Czech Republic. 27 Sep - 01 Oct 2010.

Walker, Scott J.I., McDonald, Anthony D., Niki, Toshihko and Aglietti, Guglielmo S. (2010) Initial performance assessment of hybrid inflatable structures Acta Astronautica, 68, (7-8), pp. 1185-1192. (doi:10.1016/j.actaastro.2010.10.009).


Yang, G.D., Jiang, Zheng, Shi, H.H., Jones, M.O., Xiao, T.C., Edwards, P.P. and Yan, Z.F. (2010) Study on the photocatalysis of F-S co-doped TiO2 prepared using solvothermal method Applied Catalysis B Environmental, 96, (3-4), pp. 458-465. (doi:10.1016/j.apcatb.2010.03.004).

Yang, G.D., Jiang, Zheng, Shi, H.H., Xiao, T.C. and Yan, Z.F. (2010) Preparation of highly visible-light active N-doped TiO2 photocatalyst Journal of Materials Chemistry, 20, (25), pp. 5301-5309. (doi:10.1039/C0JM00376J).

This list was generated on Fri Mar 24 01:11:30 2017 GMT.