Items where Division is "Faculty of Physical Sciences and Engineering > Electronics and Computer Science > EEE" and Year is 1997
|Up a level|
Augousti, AT and White, NM (eds.) (1997) Sensors and their Applications VIII, s.n.
Barton, A.D., Lewin, P.L. and Brown, D.J. (1997) Analysis and Control of a High Speed Indexing Chain Conveyor. At 8th International Conference on Electrical Machines and Drives (IEE Conference Publication 444). , pp. 314-8.
Barton, A.D., Lewin, P.L. and Brown, D.J. (1997) High Speed Indexing of a Chain-Based Conveyor. At 5th International Conference on Factory 2000. , pp. 491-5.
Beeby, S and Tudor, M (1997) Micromechanical resonators In, Wiley Encyclopedia of Science.
Biddlecombe, C.S., Jay, A.P., Lapaul, S. and Sykulski, J.K. (1997) Transient electromagnetic analysis coupled to electric circuits and motion At COMPUMAG Rio de Janeiro. , p. 361.
Borisov, A.S. and Golosnoy, I.O. (1997) Distribution of charged aerosol in aerial turbulent streams Mathematical Modelling (in Russian), 9, (7), pp. 100-112.
Braithwaite, S J and Chandler, S A G (1997) "DaRT " Rural Radio Systems Limited
Brown, A.D, Ross, J.N., Nichols, K.G. and Penny, M. (1997) Simulation of magneto-electronic systems using Kirchoffian networks
Brown, A.D., Baker, K.R. and Williams, A.C. (1997) On-Line Testing of Statically and Dynamically Scheduled Synthesized Systems
Chalk, C., Zwolinski, M. and Wilkins, B.R. (1997) Test Stimulus Generation for Steady-State Analysis of Analogue and Mixed-signal Circuits
Chalk, C.D. and Zwolinski, M. (1997) A Design for Test Technique to Increase the Resolution of Supply Current Monitoring in Analogue Circuits Electronics Letters, 33, (21)
Chalk, C.D. and Zwolinski, M. (1997) A DfT Technique to Increase the Resolution of AC RMS Supply Current Monitoring of Complex Analogue Circuits
Chappell, P.H., Sillitoe, J.A. and Whatley, D.R. (1997) Patient handling system.
Chen, G., Banford, H.M. and Davies, A.E. (1997) Space charge formation in gamma-irradiated LDPE. At The Dielectrics Society 28th Annual Conference:-Charges in Solid Dielectrics. , paper 5.6.
Dargie, PG, Harris, NR, Atkinson, JK and White, NM, (1997) Formulation of a screen printable piezoelectric thick-film Augousti, AT and White, NM (eds.) At Sensors and their Applications VII. , pp. 201-206.
Dargie, PG, Sion, RP, Atkinson, JK and White, NM (1997) An investigation of the effect of binder type, concentration and poling conditions upon the characteristics of screen printed piezoelectric materials At Proceedings of Eurosensors XI.
Dissado, L.A., Chen, G., Davies, A.E. and Norman, P.A. (1997) Space charge and interface reliability in underwater telecommunication systems. At IEEE Conference on Electrical Insulation and Dielectric Phenomena. , pp. 15-18.
Dissado, L.A., Doble, I., Wolfe, S.W., Norman, P.A., Davies, A.E., Chen, G., Zhong, Q., Wargotz, W.B. and Sanders, M.M. (1997) Electrical reliability of DC operated submarine telecommunication cables. IEEE Transactions on Dielectrics & Electrical Insulation, 4, (1), pp. 1-9.
Dubey, V.N., Crowder, R.M., Chappell, P.H. and Whatley, D.R. (1997) A Robotic End Effector for Unstructured Environments. At Proceedings of the American Nuclear Society's 7th Topical on Robotics and Remote Systems. , pp. 452-60.
Harris, NR and White, NM, (1997) Hybrid delay line sensors Augousti, AT and White, NM (eds.) At Sensors and their Applications VII. , pp. 201-206.
Harris, Nick, Hill, Martyn and Turner, John (1997) Practical Aspects of Modal Propagation through Water Filled Pipes Ultrasonics, (35), pp. 73-78.
Hosier, I. L., Vaughan, A. S., Sutton, S. J. and Swingler, S. G., (1997) Simulations of surface discharge damage in polymers using laser ablation and computational modelling techniques Woynarovich, G. (ed.) At International Conference on Dielectrics and Insulation. , pp. 349-52.
Hosier, I. L., Vaughan, A. S. and Swingler, S. G. (1997) Dielectric breakdown in polyethylene: the effect of morphology and molecular composition At Proceedings of the International Conference on Dielectrics and Insulation. , pp. 261-4.
Hosier, I. L., Vaughan, A. S. and Swingler, S. G. (1997) Structure-property relationships in polyethylene blends: the effect of morphology on electrical breakdown strength Journal of Materials Science, 32, (17), pp. 4523-31.
Kazmierski, T J (1997) Semantic Analysis of Analogue and Differential Equations in VHDL-AMS (invited keynote paper) At Proc. TELSIKS'97.
Kirtay, S, Chandler, S A G and Braithwaite, S J (1997) On the spectrum Efficiency of Distributed Architecture Radio Telephony System At Proceedings of the Fourth communications Networks Symposium.
Koch, M, Harris, N, Maas, R, Evans, A, White, N and Brunnschweiler, A (1997) A Novel Micropump Design with Thick Film Piezoelectric Actuation Measurement Science and Technology, 8, (1), pp. 49-57.
Koch, M, Harris, NR, Evans, AGR, White, NM and Brunnschweiler, A (1997) A novel micromachined pump based on thick-film piezoelectric actuation At Proceedings Transducers 97.
Koukharenko, E and Shepelevich, VG (1997) Formation of structure of alloys of foils of Bi2-xSbxTe compound obtained by quick quenching. 5th conference on the Physics of Condensed Materials for young scientists 21-24 April 1997 Grodno. (Belarus).p. 73. At 5th conference on the Physics of Condensed Materials for young scientists, Belarus. 21 - 24 Apr 1997.
Koukharenko, Elena and Shepelevich, VG (1997) Formation of structure Bi2-xSbxTe2 alloys obtained by quick quenching from the liquid state. IV Conference for Former USSR Structural basis of modification of materials obtained by non-traditional technologies. 17-19 June 1997. Obninsk (Russia) pp.146-147. At IV Conference for Former USSR Structural basis of modification of materials obtained by non-traditional technologies. 17 - 19 Jun 1997. , pp. 146-147.
Lam, Y. and Zwolinski, M. (1997) An Analogue Circuit Optimiser
Lam, Y. and Zwolinski, M. (1997) Analogue Circuit Synthesis from Performance Specifications
Light, C.M. and Chappell, P.H. (1997) Development of a two degree of freedom thumb for a hand prosthesis.
Light, C.M., Chappell, P.H. and Kyberd, P.J. (1997) Standardised assessment of functionality in hand prostheses.
Litovski, V. and Zwolinski, M. (1997) VLSI Circuit Simulation and Optimization, Chapman and Hall
Maas, R, Koch, M, Harris, N, Evans, A and White, N (1997) Thick Film Printing of PZT onto Silicon Materials Letters, 31, pp. 109-112.
Mahadi, A.E., Hughes, T., Beduz, C., Yang, Y., Stoll, R.L., Sykulski, J.K., Haldar, P., Sokolowski, R.S. and Power, A. (1997) Thermometric measurements of the self-field losses in silver sheathed PbBi2223 multifilamentary tapes IEEE Transactions on Applied Superconductivity, 7, (2), pp. 1658-61.
Minto, C. D. G. and Vaughan, A. S. (1997) Orientation and conductivity in polyaniline: 1 Polymer, 38, (11), pp. 2683-8.
Nijhar, T.P.K. and Brown, A.D. (1997) HDL-specific source level behavioural optimisation
Nijhar, T.P.K. and Brown, A.D. (1997) Source level optimisation of VHDL for behavioural synthesis
Parsons, D (1997) Visual polymorphism in schematic capture for VHDL-AMS At Proc. IEEE/VIUF BMAS?97.
Scivier, PK, White, NM, Brignell, JE, Gardner, JW and Vidic, M (1997) Pulsed current analogue CMOS ASIC for excitation of polymer-based gas sensors At Proceedings of Eurosensors XI.
Spinks, S.J., Chalk, C.D., Zwolinski, M. and Bell, I.M. (1997) Generation and Verification of Tests for Analogue Circuits Subject to Process Parameter Deviations
Sykulski, J.K. (1997) Editor of International Compumag Society Newsletter
Sykulski, J.K. (1997) From the Editor At International Compumag Society Newsletter. , p. 1.
Sykulski, J.K. (1997) Modelling electromagnetic fields and power losses in high temperature superconductors At Computer Methods for Material Modelling in Electromagnetics. , 2/1-2/6.
Sykulski, J.K., R.L., Stoll, Mahdi, A.E. and Please, C.P. (1997) Modelling HTc Superconductors for AC Power Loss Estimation IEEE Transactions on Magnetics, 33, (2), pp. 1468-71.
Sykulski, J.K. and Santilli, M. (1997) A proceedure for magnetic design and optimisation of permanent magnet brushless dc motors At International Symposium on Theoretical Electrical Engineering ISTET'97. , pp. 466-9.
Tudor, M J and Beeby, S P (1997) Resonant sensors: fundamentals and state of the art Sensors and Materials, 9, (3), pp. 1-15.
Vaughan, A. S. (1997) Electron microscopy and polymers: designing material properties through structural control At Materials Characterisation - How can we do it? What can it tell us?. , 3/1-4.
White, NM and Turner, JD (1997) Thick-film sensors: Past, present and future Measurement Science and Technology, 8, (1), pp. 1-20.
Wilson, Peter R. (1997) Advanced Mixed Signal Modeling and Simulation Techniques for Telecommunications Design
Wilson, Peter R. (1997) Advanced Modeling and Simulation techniques for magnetic components
Wilson, Peter R. (1997) Design of Electric Vehicle Systems using simulation
Zwolinski, M., Brown, A.D. and Chalk, C. (1997) Concurrent analogue fault simulation
Zwolinski, M., Chalk, C.D. and Perkins, A.J. (1997) Multi-Level Fault Modeling Of Analog Circuits