Browse by Divisions pre August 2011

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
[tool] Add To Shelf...
Number of items: 87.

Ahmed, T.M., Chapchap, A, Hudson, D.A., Temarel, P. and Hirdaris, S.E. (2010) The influence of forward speed and nonlinearities on the dynamic behaviour of a container ship in regular waves At William Froude Conference on Advances in theoretical and applied hydrodynamics – Past and Future, United Kingdom. 24 - 25 Nov 2010.

Ahmed, T.M., Hudson, D.A. and Temarel, P. (2010) Comparison of two numerical models for the prediction of parametric roll resonance in regular waves At PRADS 2010: 11th International Symposium on Practical Design of Ships and Other Floating Structures, Brazil. 10 pp.

Ahmed, T.M., Hudson, D.A. and Temarel, P. (2010) An investigation into parametric roll resonance in regular waves using a partly non-linear numerical model Ocean Engineering, 37, (14-15), pp. 1307-1320. (doi:10.1016/j.oceaneng.2010.06.009).

Auboin, L., Blake, J. I. R., Rigg, C., Robinson, W., Streeter, M., Taunton, D. J. and Turnock, S. R. (2010) A fault tree based investigation of the reliability of ocean racing yachts incorporating human performance and canting keel impacts At 2nd International Conference on Innovation in High Performance Sailing Yachts, France. 30 Jun - 01 Jul 2010.

Austin, S.C., Wilson, P.A. and Forestier, J.-M. (2010) D6 - draft amendments to existing VDR standards University of Southampton 36pp. , Southampton, GB

Banks, J., Webb, A., Spenkuch, T. and Turnock, S.R. (2010) Measurement of dynamic forces experienced by an asymmetric yacht during a gybe, for use within sail simulation software Procedia Engineering, 2, (2), pp. 2511-2516. (doi:10.1016/j.proeng.2010.04.024).

Banks, Joe, Phillips, A.B., Bull, P.W. and Turnock, S.R. (2010) RANS simulations of the multiphase flow around the KCS hullform At Gothenburg 2010: A Workshop on CFD in Ship Hydrodynamics, Sweden. 08 - 10 Dec 2010. 6 pp.

Banks, Joe, Phillips, A.B. and Turnock, Stephen (2010) Free surface CFD prediction of components of Ship Resistance for KCS At 13th Numerical Towing Tank Symposium, Germany. 10 - 12 Oct 2010. 6 pp.

Battams, G.P., Dulieu-Barton, J.M. and Boyd, S.W., (2010) Evaluation of edge cracks in cross-ply laminates using image correlation and thermoelastic stress analysis Dulieu-Barton, J.M. and Mines, R.A.W. (eds.) In Advances in Experimental Mechanics VII. Trans Tech. 8 pp, pp. 227-232. (doi:10.4028/www.scientific.net/AMM.24-25.91).

Blanco, M. and Wilson, P. A. (2010) Autonomous underwater vehicle minimum-time navigation in a current field At Oceans 2010, United States. 20 - 23 Sep 2010. 4 pp.

Blanco, Max (2010) A fleet of autonomous underwater vehicles to locate flight 447 At 29th International Conference on Ocean, Offshore and Artic Engineering OMAE 2010, China. 06 - 11 Jun 2010. 9 pp.

Blanco, Max (2010) Proposal for a shipborne auv refuel system At 29th International Conference on Ocean, Offshore and Artic Engineering OMAE 2010, China. 06 - 11 Jun 2010.

Blanco, Max (2010) Viscous effects for the structural model of a towfish system At Oceans '10, United States. 20 - 23 Sep 2010.

Blanco, Max and Wilson, P. A. (2010) Transverse oscillations of an underwater beam-cable system At International Federation of Automatic Control Conference on Control Systems in Marine Applications, Germany. 15 - 17 Sep 2010.

Blanco, Max and Wilson, P.A. (2010) Autonomous underwater vehicle pursuit of biological specimens in the open ocean At International Federation of Automatic Control Conference on Control Systems in Marine Applications, Germany. 15 - 17 Sep 2010.

Boyd, S.W., Dulieu-Barton, J.M., Thomsen, O.T. and El-Gazzani, S. (2010) Through thickness stress distributions in pultruded GRP materials Composite Structures, 92, (3), pp. 662-668. (doi:10.1016/j.compstruct.2009.09.027).

Burden, Aaron, Hearn, Grant E., Lloyd, Thomas, Mockler, Simon, Mortola, Lorenzo, Shin, Ie Bum and Smith, Ben (2010) Concept design of a fast sail assisted feeder container ship At Marine Unconventional Design Symposium – MUDS 2010, United Kingdom. 08 Jul 2010.

Burden, Aaron, Lloyd, Thomas, Mockler, Simon, Mortola, Lorenzo, Shin, Ie Bum and Smith, Ben (2010) Concept design of a fast sail assisted feeder container ship University of Southampton 257pp. , Southampton, GB

Carreno, Sebastian, Ridao, Pere, Wilson, P. A. and Petillot, Yvan (2010) A survey on terrain based navigation for AUVs At International Federation of Automatic Control Conference on Control Systems in Marine Applications, Rostock, DE 15 - 17 Sep 2010, Germany.

Carreno, Sebastian, Wilson, P.A., Ridao, Pere and Petillot, Yvan (2010) A survey on terrain based navigation for AUVs At OCEANS 2010 MTS/IEEE Seattle, United States. 20 - 23 Sep 2010.

Chen, Jianwen and Chen, Zhi-Min (2010) Stochastic non-Newtonian fluid motion equations of a nonlinear bipolar viscous fluid Journal of Mathematical Analysis and Applications (doi:10.1016/j.jmaa.2010.03.049).

Chen, Y.G., Price, W.G. and Temarel, P. (2010) An anti-diffusive method for computational modelling of sloshing in an LNG tank At 11th International Symposium on Practical Design of Ships and Other Floating Structures, Brazil. 19 - 24 Sep 2010. 9 pp.

Choi, W.J., Xiong, Y.P. and Shenoi, R.A. (2010) Vibration characteristics of sandwich beams with steel skins and magnetorheological cores Advances in Structural Engineering, 13, (5), pp. 837-844. (doi:10.1260/1369-4332.13.5.837).

Crump, D.A. and Dulieu-Barton, J.M. (2010) Analysis of large scale composite components using TSA at low cyclic frequencies In Proceedings of the SEM Annual Conference 2010. Society for Experimental Mechanics..

Crump, D.A. and Dulieu-Barton, J.M. (2010) Performance assessment of aerospace sandwich secondary structure panels using thermoelastic stress analysis Plastics, Rubber and Composites, 39, (3-5), pp. 137-147. (doi:10.1179/174328910X12647080902691).

Crump, D.A., Dulieu-Barton, J.M. and Savage, J. (2010) Design and commission of an experimental test rig to apply a full-scale pressure load on composite sandwich panels representative of aircraft secondary structure Measurement Science and Technology, 21, (1), 015108-[16pp]. (doi:10.1088/0957-0233/21/1/015108).

Crump, Duncan A., Dulieu-Barton, Janice M. and Savage, John (2010) The manufacturing procedure for aerospace secondary sandwich structure panels Journal of Sandwich Structures and Materials, 12, pp. 421-427. (doi:10.1177/1099636209104531).

Dadd, George M., Hudson, Dominic A. and Shenoi, R.A. (2010) Comparison of two kite force models with experiment Journal of Aircraft, 47, (1), pp. 212-224. (doi:10.2514/1.44738).

Deakin, Barry (2010) Collating evidence for a universal method of stability assessment or guidance The Transactions of the Royal Institution of Naval Architects Part A: International Journal of Maritime Engineering, 152, (Part A2 2101), A-85. (doi:10.3940/rina.ijme.2010.a2.175).

Deakin, Barry and Buckland, Dickon (2010) Recent advances in radio controlled model testing At 2010 Chesapeake Powerboat Symposium, United States. 19 - 20 Mar 2010. 11 pp.

Dedes, E, Hudson, D.A. and Turnock, S.R. (2010) Development of hybrid diesel - electric propulsion system for ships At 1st Marine Technology Postgraduate Conference, United Kingdom. 10 - 11 Jun 2010.

Dedes, E, Hudson, Dominic A. and Turnock, Stephen R. (2010) Design of hybrid diesel-electric energy storage systems to maximize overall ship propulsive efficiency At PRADS 2010: 11th International Symposium on Practical Design of Ships and Other Floating Structures, Brazil. 19 - 24 Sep 2010. 11 pp.

Denchfield, S.S., Hudson, D.A. and Temarel, P. (2010) Numerical and experimental evaluation of rogue waves and corresponding ship motions at forward speed At 28th Symposium on Naval Hydrodynamics, United States. 12 - 17 Sep 2010. 17 pp.

Denchfield, S.S., Wood, C.D., Hudson, D.A., Tan, M. and Temarel, P. (2010) Comparisons between CFD predictions and experiments for rogue wave-ship interactions At PRADS 2010: 11th International Symposium on Practical Design of Ships and Other Floating Structures, Brazil. 19 - 24 Sep 2010. 7 pp.

Dulieu-Barton, J.M., Berggreen, C. and Boyenval Langlois, C., (2010) Estimation of fracture parameters in foam core materials using thermal techniques Ravichandran, G. (ed.) In Proceedings of the 9th International Conference on Sandwich Structures (ICSS-9). California Institute of Technology. 10 pp.

Dulieu-Barton, J.M., Boyenval Langlois, C., Thomsen, O.T., Zhang, S. and Fruehmann, R.K. (2010) Derivation of temperature dependent material properties of polymer foam core materials using optical extensometry [in special issue: ICEM 14 – 14th International Conference on Experimental Mechanics] EPJ Web of Conferences, 6, 38004-[8pp]. (doi:10.1051/epjconf/20100638004).

Dulieu-Barton, J.M., Crump, D.A. and Griffith, D., (2010) Effect of core crush on honeycomb sandwich panels Ravichandran, G. (ed.) In Proceedings of the 9th International Conference on Sandwich Structures (ICSS-9). California Institute of Technology. 10 pp.

Dulieu-Barton, J.M., Fruehmann, R.K., Zhang, S. and Thomsen, O.T. (2010) Thermomechanical interaction effects in composite sandwich structures – initial experimental analysis and derivation of mechanical properties In Proceedings of Office of Naval Research Annual Review of Solid Mechanics Programme. Office of Naval Research., pp. 263-272.

Dulieu-Barton, J.M., Khennouf, D., Chambers, A.R., Lennard, F.J. and Eastop, Dinah (2010) Long term condition monitoring of tapestries using image correlation In Proceedings of the SEM Annual Conference, 2010,. Society for Experimental Mechahanics..

Dulieu-Barton, J.M., Zhang, S., Fruehmann, R. and Thomsen, O.T. (2010) Thermomechanical interaction effects in composite sandwich structures – initial experimental analysis and derivation of mechanical properties At 7th Asian Conference on Composite Materials, Taiwan, Province of China. 15 - 18 Nov 2010. 4 pp.

Emery, T.R. and Dulieu-Barton, J.M. (2010) Thermoelastic stress analysis of damage mechanisms in composite materials Composites Part A: Applied Science and Manufacturing, 41, pp. 1729-1742. (doi:10.1016/j.compositesa.2009.08.015).

Eriksen, R., Berggreen, C., Boyd, S.W. and Dulieu-Barton, J.M. (2010) Towards high velocity deformation characterisation of metals and composites using Digital Image Correlation EPJ Web of Conferences, 6, 38016-[8pp]. (doi:10.1051/epjconf/20100631013).

Findlay, M. and Turnock, S.R. (2010) Mechanics of a rowing stroke: surge speed variations of a single scull Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology, 224, (1), pp. 89-100. (doi:10.1243/17543371JSET49).

Freuhmann, R.K., Dulieu-Barton, J.M. and Quinn, S., (2010) Towards a hybrid infrared approach for damage assessment Dulieu-Barton, J.M. and Mines, R.A.W. (eds.) In Advances in Experimental Mechanics VII. Trans Tech. 8 pp, pp. 57-62. (doi:10.4028/www.scientific.net/AMM.24-25.57).

Fruehmann, R.K, Dulieu-Barton, J.M. and Quinn, S. (2010) Thermoelastic stress and damage analysis using transient loading Experimental Mechanics, 50, (7), pp. 1075-1086. (doi:10.1007/s11340-009-9295-9).

Fruehmann, R.K., Dulieu-Barton, J.M. and Quinn, S. (2010) Assessment of fatigue damage evolution in woven composite materials using infra-red techniques Composites Science and Technology, 70, pp. 937-946. (doi:10.1016/j.compscitech.2010.02.009).

Hearn, Grant E., Chaplin, John., Palmer, A., Soares, Carlos Guedes. and Kishev, Rumen. (2010) Experimental investigation of the motions and internal free surface profiles of a damaged ship At HYDRALAB III Joint User Meeting, Germany. 01 - 04 Feb 2010.

Hebb, R.I., Dulieu-Barton, J.M., Worden, K. and Tatum, P., (2010) Towards the derivation of stress intensity factors by parametric modelling of full-field thermoelastic data Dulieu-Barton, J.M. and Mines, R.A.W. (eds.) In Advances in Experimental Mechanics VII. Trans Tech. 8 pp, pp. 227-232. (doi:10.4028/www.scientific.net/AMM.24-25.227).

Hirdaris, Spyros, Chapman, Tristan and Hudson, Dominic A. (2010) Green ship technologies and kite assisted propulsion At Meeting of Southern Joint Branch of RINA and IMarEST, United Kingdom.

Hudson, D.A., Dadd, George M., Chapman, T. and Shenoi, R.A. (2010) Kite assisted propulsion research At 7th Annual Green Ship Technology Conference, Denmark. 06 - 07 Mar 2010.

Hudson, D.A., Price, W.G., Temarel, P. and Turnock, S.R. (2010) A brief discussion of the development of mathematical models in ship motion theory In, The Royal Institution of Naval Architects 1860-2010. Wales, GB, Royal Institution of Naval Architects pp. 28-32.

Hudson, Dominic A. (2010) Developments in alternative power sources: wind power for shipping At Future Fuels for Shipping, United Kingdom.

Hudson, Dominic A. (2010) High speed catamaran hydrodynamics and human factors of small, high speed craft At Seminar on High Speed Ships, Japan.

Khennouf, D., Dulieu-Barton, J.M., Chambers, A.R., Lennard, F.J. and Eastop, D.D. (2010) Assessing the feasibility of monitoring strain in historical tapestries using Digital Image Correlation Strain, 46, (1), pp. 19-32. (doi:10.1111/j.1475-1305.2009.00637.x).

Lee, F.J. and Wilson, P.A. (2010) Experimental study of the slamming in a modern racing yacht Journal of Sailboat Technology, 2010, (1), pp. 1-28.

Lee, Y., Tan, M., Temarel, P. and Miao, S.H. (2010) Coupling between flexible ship and liquid sloshing using potential flow analysis and their effect on wave induced loads At William Froude Conference on Advances in theoretical and applied hydrodynamics – Past and Future, United Kingdom. 24 - 25 Nov 2010.

Lee, Youngbum, Tan, Mingyi, Temarel, Pandeli and Miao, Shihua (2010) Coupling between flexible ship and liquid sloshing using potential flow analysis In Proceedings of the 29th International Conference on Ocean, Offshore and Arctic Engineering. American Society of Mechanical Engineers. 8 pp.

Leekitwattana, M., Boyd, S.W. and Shenoi, R.A. (2010) An alternative design of steel-concrete-steel sandwich beam At 9th International Conference on Sandwich Structures (ICSS-9), United States. 14 - 16 Jun 2010. 10 pp.

Lewis, Simon G., Hudson, Dominic A., Turnock, Stephen R. and Taunton, Dominic J. (2010) Impact of a free-falling wedge with water: synchronized visualization, pressure and acceleration measurements Fluid Dynamics Research, 42, (3), 035509-[30pp]. (doi:10.1088/0169-5983/42/3/035509).

Longana, M.L., Dulieu-Barton, J.M. and Syngellakis, S. (2010) Application of optical measurement techniques to high strain rate deformations in composite materials At 7th Asian Conference on Composite Materials, Taiwan, Province of China. 15 - 18 Nov 2010. 4 pp.

Luo, Jian and Veres, Sandor M. (2010) Frequency domain iterative feedforward/feedback tuning for MIMO ANVC Automatica, 46, (4), pp. 735-742. (doi:10.1016/j.automatica.2010.01.025).

Molland, A.F. and Wilson, P.A. (2010) The development of hydrodynamics: 1860–2010 In, Transactions and Annual Report 2010. London, GB, Royal Institution of Naval Architects pp. 32-34.

Nicholls-Lee, Rachel F., Boyd, Stephen W. and Turnock, Stephen R. (2010) Obtaining experimental data suitable for validation of a numerical design tool for an adaptive composite free stream tidal turbine blade At The 11th International Symposium on Practical Design of Ships and Other Floating Structures, Brazil. 19 - 24 Sep 2010. 7 pp.

Phillips, A. B., Turnock, Stephen R. and Furlong, Maaten (2010) Influence of turbulence closure models on the vortical flow field around a submarine body undergoing steady drift Journal of Marine Science and Technology, 15, (3), pp. 201-217. (doi:10.1007/s00773-010-0090-1).

Phillips, A.B., Turnock, S.R. and Furlong, M.E. (2010) Accurate capture of rudder-propeller interaction using a coupled blade element momentum-RANS approach Ship Technology Research / Schiffsteknik, 57, (2), pp. 128-139. (doi:10.1179/str.2010.57.2.005).

Querard, A.B.G., Temarel, P. and Turnock, S.R. (2010) Application of RANS to hydrodynamics of bilge keels and baffles At William Froude Conference on Advances in theoretical and applied hydrodynamics – Past and Future, United Kingdom.

Querard, A.B.G. and Wilson, P.A. (2010) A comparative study between wind-tunnel experiments and RANS simulations of modern square headed main sails International Journal of Small Craft Technology, 151, (B1), pp. 1-10. (doi:10.3494/rina.ijsct.2010.b1.82).

Rattanasiri, Pareecha and Wilson, P. A. (2010) Mathematical formulation of body of revolution applied to AUV's shape At The 3rd International Conference on Underwater System Technology. 10 pp.

Rihan, Dominic, O'Regan, Noel and Deakin, Barry (2010) The Development of a "Green Trawler" At E-Fishing: Fishing Vessel Energy Efficiency. 2nd International Symposium on Fishing Vessel Energy Efficiency, Spain. 22 - 24 May 2010. 7 pp.

Robinson, A.F., Dulieu-Barton, J.M., Quinn, S. and Burguete, R.L. (2010) Paint coating characterisation for thermoelastic stress analysis In Proceedings of Novel Aspects of Surfaces and Materials 2010. Institute of Physics. 2 pp, pp. 90-91.

Robinson, A.F., Dulieu-Barton, J.M., Quinn, S. and Burguete, R.L. (2010) Paint coating characterization for thermoelastic stress analysis of metallic materials Measurement Science and Technology, 21, (8), 085502-[12pp]. (doi:10.1088/0957-0233/21/8/085502).

Robinson, A.F., Dulieu-Barton, J.M., Quinn, S. and Burguete, R.L. (2010) Thermoelastic investigation of residual stress: plastic deformation and the change in thermoelastic constant Journal of Holocaust Education, 6, 38016-[8pp]. (doi:10.1051/epjconf/20100638016).

Sobey, A.J., Blake, J.I.R. and Shenoi, R.A. (2010) Concurrent engineering principles applied to marine composite structures for reduction in production costs through robust design At The Royal Institution of Naval Architects Marine & Offshore Composites, United Kingdom. 03 - 04 Feb 2010.

Sobey, A.J., Blake, J.I.R. and Shenoi, R.A. (2010) Reliability analysis of damaged steel structures using finite element analysis At 5th International ASRANet Conference, United Kingdom. 14 - 16 Jun 2010.

Spenkuch, Thomas, Turnock, Stephen, Scarponi, Matteo and Shenoi, Ajit (2010) Real time simulation of tacking yachts: how best to counter the advantage of an upwind yacht Procedia Engineering, 2, (2), pp. 3305-3310. (doi:10.1016/j.proeng.2010.04.149).

Taunton, D.J., Hudson, D.A. and Shenoi, R.A. (2010) Characteristics of a series of high speed hard chine planing hulls - part 1: performance in calm water International Journal of Small Craft Technology, 152, pp. 55-75. (doi:10.3940/rina.ijsct.2010.b2.96).

Trimarchi, Daniele (2010) OpenFOAM At OpenFOAM workshop. 235 pp.

Turnock, S.R., Lewis, S.G., Philips, A.B., Banks, J., Winden, B., Hudson, D.A. and Molland, A.F. (2010) Evaluating the self-propulsion of a container ship in a seastate using computational fluid dynamics At William Froude Conference: Advances in Theoretical and Applied Hydrodynamics - Past and Future, United Kingdom. 24 - 25 Nov 2010. 12 pp.

Underwood, J., Sobey, A.J., Blake, J.I.R. and Shenoi, R.A. (2010) Local stress sensitivity analysis of damaged steel ship hulls At 11th International Symposium on Practical Design of Ships and Other Floating Structures (PRADS), Brazil. 19 - 24 Sep 2010.

Wang, W.J., Dulieu-Barton, J. M. and Li, Q. (2010) Assessment of non-adiabatic behaviour in thermoelastic stress analysis of small scale components Experimental Mechanics, 50, pp. 449-461. (doi:10.1007/s11340-009-9249-2).

Wilson, P. A. (2010) Prediction of quiescent periods University of Southampton 19pp. , Southampton, GB (Ship Science Report, 146).

Wilson, P. A. (2010) Underwater vehicle technology: the European project (FREESUB) At The 3rd International Conference on Underwater System Technology: Theory and Applications 2010 (USYS'10), Malaysia. 01 - 02 Nov 2010. 16 pp.

Wilson, P.A. and Austin, S.C. (2010) Maritime voyage data recorder study by the European Maritime Data Management Project International Journal of Maritime Engineering, 151, (A4), pp. 13-25. (doi:10.3940/rina.ijme.2009.a4.160).

Wilson, P.A. and Molland, A.F. (2010) The development of hydrodynamics: 1860–2010 At The William Froude Conference: Advances in Theoretical and Applied Hydrodynamics, Past and Future, United Kingdom. 24 - 25 Nov 2010.

Wood, C.D., Hudson, Dominic A. and Tan, Mingyi (2010) CFD simulation of orifice flow for the flooding of damaged ships At NuTTS 2010: 13th Numerical Towing Tank Symposium, Germany. 10 - 12 Oct 2010. 4 pp.

Zhao, Libin, Qin, Tianliang, Shenoi, R.Ajit, Zhang, Jianyu, Liang, Xianzhu and Huang, Hai (2010) Strength prediction of composite Pi joints under tensile load Journal of Composite Materials, 44, (23), pp. 2759-2778. (doi:10.1177/0021998310369593).

le Clercq, L.A. and Hudson, D.A. (2010) Performance prediction of the planing yacht hull At INNOV'SAIL 2010: The Second International Conference on Innovation in High Performance Sailing Yachts, France. 10 pp.

This list was generated on Mon Mar 20 19:27:17 2017 GMT.