Browse by Divisions pre August 2011

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
[tool] Add To Shelf...
Number of items: 87.

Alhajeri, Saleh N. (2010) Processing of aluminium and titanium alloys by severe plastic deformation University of Southampton, School of Engineering Sciences, Doctoral Thesis .

Alhajeri, Saleh N., Kawasaki, Megumi, Gao, Nong and Langdon, Terence G. (2010) The evolution of homogeneity during processing of aluminium alloys by HPT Materials Science Forum, 667-669, pp. 277-282. (doi:10.4028/www.scientific.net/MSF.667-669.277).

An, X.H., Wu, S.D., Zhang, Z..F., Figueiredo, R.B., Gao, N and Langdon, T.G. (2010) Evolution of microstructural homogeneity in copper processed by high-pressure torsion Scripta Materialia, 63, (5), pp. 560-563. (doi:10.1016/j.scriptamat.2010.05.030).

Asadollahbaik, Asa, Boden, Stuart, Molinari, Marc, Cox, Simon and Bagnall, Darren (2010) Modelling biomimetic moth-eye structures for antireflection surfaces Preprint

Balogh, Levente, Figueiredo, Roberto B., Ungár, Tamás and Langdon, Terence G. (2010) The contributions of grain size, dislocation density and twinning to the strength of a magnesium alloy processed by ECAP Materials Science and Engineering: A, 528, (1), pp. 533-538. (doi:10.1016/j.msea.2010.09.048).

Bavykin, Dmitry V., Carravetta, Marina, Kulak, Alexander N. and Walsh, Frank C. (2010) Application of magic-angle spinning NMR to examine the nature of protons in titanate nanotubes Journal of the American Chemical Society, 22, (8), pp. 2458-2465. (doi:10.1021/cm903100a).

Bavykin, Dmitry V., Kulak, Alexander N. and Walsh, Frank C. (2010) Metastable nature of titanate nanotubes in an alkaline environment Crystal Growth & Design, 10, (10), pp. 4421-4427. (doi:10.1021/cg100529y).

Bavykin, Dmitry V. and Walsh, Frank C. (2010) Titanate and Titania Nanotubes: Synthesis, Properties and Applications, Cambridge, UK, Royal Society of Chemisty, 154pp. (RCS Nanoscience & Nanotechnology).

Cao, Y., Kawasaki, M., Wang, Y.B., Alhajeri, S.N., Liao, X.Z., Zheng, W.L., Ringer, S.P., Zhu, Y.T. and Langdon, T.G. (2010) Unusual macroscopic shearing patterns observed in metals processed by high-pressure torsion Journal of Materials Science, 45, (17), pp. 4545-4553. (doi:10.1007/s10853-010-4485-5).

Cao, Y., Wang, Y.B., Alhajeri, S.N., Liao, X.Z., Zheng, W.L., Ringer, S.P., Langdon, T.G. and Zhu, Y.T. (2010) A visualization of shear strain in processing by high-pressure torsion Journal of Materials Science, 45, (3), pp. 765-770. (doi:10.1007/s10853-009-3998-2).

Cetlin, Paulo R., Aguilar, Maria Teresa P., Figueiredo, Roberto B. and Langdon, Terence G. (2010) Avoiding cracks and inhomogeneities in billets processed by ECAP Journal of Materials Science, 45, (17), pp. 4561-4570. (doi:10.1007/s10853-010-4384-9).

Chen, S.L., Wang, L., Wood, R.J.K., Callan, R. and Powrie, H.E.G. (2010) Anomaly detection of the tapered roller bearings with statistical data-driven approaches Insight, 52, (8), pp. 428-436. (doi:10.1784/insi.2010.52.8.428).

Chi, X.P., Yang, S. and Evans, J.R.G. (2010) Extrusion pressure generated in high alumina content paste extrusion In Proceedings of the 2010 International Conference on Manufacturing Automation. Institute of Electrical and Electronics Engineers Computer Society., pp. 55-60. (doi:10.1109/ICMA.2010.28).

Chinh, Nguyen Q., Csanádi, Tamás, Gubicza, Jenő and Langdon,, Terence G. (2010) Plastic behavior of face-centered-cubic metals over a wide range of strain Acta Materialia, 58, (15), pp. 5015-5021. (doi:10.1016/j.actamat.2010.05.036).

Chinh, Nguyen Q., Gubicza, Jeno, Czeppe, Tomasz, Lendvai, Janos and Langdon, Terence G (2010) Processing age-hardenable alloys by equal-channel angular pressing at room temperature: strategies and advantages In, Zhao, Yonghao and Liao, Xiaozhou (eds.) Ductility of Bulk Nanostructured Materials. Switzerland, Trans Tech pp. 527-534. (Materials Science Forum, 633-634). (doi:10.4028/www.scientific.net/MSF.633-634.527).

Craig, M. (2010) Advanced condition monitoring to predict rolling element bearing wear using multiple in-line and off-line sensing University of Southampton, School of Engineering Sciences, Doctoral Thesis .

Danos, Lefteris and Markvart, Tomas (2010) Excitation energy transfer rate from langmuir blodgett (LB) dye monolayers to silicon: effect of aggregate formation Chemical Physics Letters, 490, (4-6), pp. 194-199. (doi:10.1016/j.cplett.2010.03.045).

Ding, Qi, Wang, Liping, Wang, Yonqxin, Wang, S.C., Hu, Litian and Xue, Qunji (2010) Improved tribological behavior of DLC films under water lubrication by surface texturing Tribology letters, 41, (2), pp. 439-449. (doi:10.1007/s11249-010-9730-1).

Duan, Zhi C., Liao, Xiao Z., Kawasaki,, Megumi, Figueiredo, Roberto B. and Langdon, Terence G. (2010) Influence of high-pressure torsion on microstructural evolution in an Al–Zn–Mg–Cu alloy Journal of Materials Science, 45, (17), pp. 4621-4631. (doi:10.1007/s10853-010-4400-0).

Duan, Zhi Chao, Chinh, Nguyen, Xu, Cheng and Langdon, Terence G. (2010) Developing processing routes for the equal-channel angular pressing of age-hardenable aluminum alloys Metallurgical and Materials Transactions A, 41, (8), pp. 802-809. (doi:10.1007/s11661-009-0020-1).

Duan, Zhi Chao and Langdon, Terence G. (2010) Effect of a special ECAP die configuration on microhardness distribution in pure aluminum Materials Science Forum, 667-669, pp. 69-74. (doi:10.4028/www.scientific.net/MSF.667-669.69).

Figueiredo, R.B., Correa, E.C.S., Monteiro, W.A., Aguilar, M.T.P. and Cetlin, P.R. (2010) The effect of cyclic bending on the mechanical properties and dislocation structures of drawn steel bars Journal of Materials Science, 45, (3), pp. 804-810. (doi:10.1007/s10853-009-4003-9).

Figueiredo, R.B. and Langdon, T.G. (2010) Characteristics of cavitation in a superplastic magnesium AZ31 alloy processed by equal-channel angular pressing Reviews on Advanced Materials Science, 25, pp. 249-255.

Figueiredo, Robert B. and Langdon, Terence G. (2010) Grain refinement and mechanical behaviour of a magnesium alloy processed by ECAP Journal of Materials Science, 45, (17), pp. 4827-4836. (doi:10.1007/s10853-010-4589-y).

Figueiredo, Roberto B., Terzi, Sofiane and Langdon, Terence G. (2010) Using X-ray microtomography to evaluate cavity formation in a superplastic magnesium alloy processed by equal-channel angular pressing Acta Materialia, 58, (17), pp. 5737-5748. (doi:10.1016/j.actamat.2010.06.049).

Furukawa, M., Horita, Z. and Langdon, T.G. (2010) Microstructures of aluminium and copper single crystals processed by equal-channel angular pressing In, Chandra, T., Wanderka, N., Reimers, W. and Lonescu, M. (eds.) THERMEC 2009. 6th International Conference on Processing and Manufacturing of Advanced Materials Switzerland, Trans Tech pp. 1946-1951. (Materials Science Forum, 638-642). (doi:10.4028/www.scientific.net/MSF.638-642.1946).

Gao, Feng, Yang, Shoufeng, Hao, Pengwei and Evans, Julian R.G. (2010) Suspension stability and fractal patterns: A comparison using hydroxyapatite Journal of the American Ceramic Society, 94, (3), pp. 704-712. (doi:10.1111/j.1551-2916.2010.04149.x).

Gubicza, J, Chinh, N.Q., Lábár, J.L., Hegedüs, Z. and Langdon, T.G. (2010) Principles of self-annealing in silver processed by equal-channel angular pressing: the significance of a very low stacking fault energy Materials Science and Engineering: A, 527, (3), pp. 752-780. (doi:10.1016/j.msea.2009.08.071).

Gubicza, Jenö, Chinh, Nguyen Q. and Langdon, Terence G. (2010) Monitoring of self-annealing in ultrafine-grained silver using nanoindentation Nanoscience and Nanotechnology Letters, 2, (4), pp. 294-297. (doi:10.1166/nnl.2010.1096).

Jiang, Liudi, Lewis, G., Spearing, S. M., Jennett, N. M. and Monclus, M. (2010) Development of a low temperature amorphous Si/Ti for integrated MEMS/NEMS Microelectronic Engineering, 87, (5-8), pp. 1259-1262. (doi:10.1016/j.mee.2009.11.039).

Kawasaki, Megumi, Ahn, B.yungmin and Langdon, Terence G. (2010) Effect of strain reversals on the processing of high-purity aluminum by high-pressure torsion Journal of Materials Science, 45, (17), pp. 4583-4593. (doi:10.1007/s10853-010-4420-9).

Kawasaki, Megumi, Ahn, Byungmin and Langdon, Terence G. (2010) Microstructural evolution in a two-phase alloy processed by high-pressure torsion Acta Materialia, 58, (3), pp. 919-930. (doi:10.1016/j.actamat.2009.10.007).

Kawasaki, Megumi, Ahn, Byungmin and Langdon, Terence G. (2010) Significance of strain reversals in a two-phase alloy processed by high-pressure torsion Materials Science and Engineering: A, 527, (26), pp. 7008-7016. (doi:10.1016/j.msea.2010.07.090).

Kawasaki, Megumi and Langdon, Terence G. (2010) Characteristics of high temerature creep in pure aluminium processed by equal-channel angular pressing In, Chandra, T., Wanderka, N., Reimers, W. and Lonescu, M. (eds.) THERMEC 2009. 6th International Conference on Processing and Manufacturing of Advanced Materials Switzerland, Trans Tech pp. 1965-1970. (Materials Science Forum, 638-642). (doi:10.4028/www.scientific.net/MSF.638-642.1965).

Kawasaki, Megumi and Langdon, Terence G. (2010) New developments in the processing of bulk nanoscale metals using high-pressure torsion Nanoscience and Nanotechnology Letters, 2, (4), pp. 303-307. (doi:10.1166/nnl.2010.1098).

Kawasaki, Megumi, Sklenicka, Vaclav and Langdon, Terence G. (2010) An evaluation of creep behaviour in ultrafine-grained aluminium alloys processed by ECAP Journal of Materials Science, 45, (1), pp. 271-274. (doi:10.1007/s10853-009-3975-9).

Khu, Khu, Jiang, Liudi and Markvart, Tom (2010) Thermodynamic modeling of micro heat engines for power generation At PowerMEMS 2010 - The 10th International Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications, Belgium. 30 Nov - 03 Dec 2010. 4 pp.

Knabe, Sebastian, Soleimani, Nazila, Markvart, Tomas and Bauer, Gottfried Heinrich (2010) Efficient light trapping in a fluorescence solar collector by 3D photonic crystal Physica Status Solidi (RRL) Rapid Research Letters (doi:10.1002/pssr.201004047).

Langdon, T.G., (2010) Seventy-five years of superplastic research: an overall perspective for the superplasticity conferences Sanders, Daniel G. (ed.) In Superplasticity in Advanced Materials (ICSAM 2009). Trans Tech., pp. 3-10.

Langdon, Terence G. (2010) The impact of bulk nanostructured materials in modern research Reviews on Advanced Materials Science, 25, pp. 11-15.

Langdon, Terence G. (2010) Processing by severe plastic deformation: historical developments and current impact [in special issue: Nanomaterials by Severe Plastic Deformation: NanoSPD5] Materials Science Forum, 667-669, 9- 14. (doi:10.4028/www.scientific.net/MSF.667-669.9).

Lee, Y., Lu, X., Hao, Y., Yang, S., Evans, J.R.G. and Parini, C.G. (2010) Narrow-beam azimuthally omni-directional millimetre-wave antenna using freeformed cylindrical woodpile cavity IET Microwaves, Antennas & Propagation, 4, (10), p. 1491. (doi:10.1049/iet-map.2009.0224).

Li, X.M. and Starink, M.J. (2010) Identification and analysis of intermetallic phases in overaged Zr-containing and Cr-containing Al-Zn-Mg-Cu alloys Journal Alloys and Compounds, 509, (12), pp. 471-476. (doi:10.1016/j.jallcom.2010.09.064).

Li, Y., Zhao, Y.H., Liu, W., Xu, C., Horita, Z., Liao, X.Z., Zhu, Y.T., Langdon, T.G. and Lavernia, E.J. (2010) Influence of grain size on the density of deformation twins in Cu–30%Zn alloy Materials Science and Engineering: A, 527, (16-17), pp. 3942-3948. (doi:10.1016/j.msea.2010.02.076).

Loparic, Marko, Wirz, Dieter, Daniels, A.U., Raiteri, Roberto, VanLandingham, Mark R., Guex, Geraldine, Martin, Ivan, Aebi, Ueli and Stolz, Martin (2010) Micro- and nanomechanical analysis of articular cartilage by indentation-type atomic force microscopy: validation with a gel-microfiber composite microscopy Biophysical Journal, 98, (11), pp. 2731-2740. (doi:10.1016/j.bpj.2010.02.013).

Lu, Xuesong, Lee, Yoonjae, Yang, Shoufeng, Hao, Yang, Evans, Julian R. G. and Parini, Clive G. (2010) Solvent-based paste extrusion solid freeforming Journal of the European Ceramic Society, 30, (1), pp. 1-10. (doi:10.1016/j.jeurceramsoc.2009.07.019).

Markvart, Tom (2010) Solar energy conversion: kinetics, thermodynamics and reciprocity At The Artificial Leaf, Netherlands. 01 - 05 Feb 2010.

Meyer, T.J.J. (2010) Photon transport in fluorescent solar collectors University of Southampton, School of Engineering Sciences, Doctoral Thesis .

Moffat, Andrew J., Wright, Peter, Helfen, Lukas, Baumbach, T., Johnson, Gregory, Spearing, Simon M. and Sinclair, Ian (2010) In situ synchrotron computed laminography of damage in carbon fibre-epoxy [90/0](s) laminates Scripta Materialia, 62, (2), pp. 97-100. (doi:10.1016/j.scriptamat.2009.09.027).

Parel, T.S., Wang, S.C. and Starink, M.J. (2010) Hardening of an Al-Cu-Mg alloy containing type I and II S phase precipitates Materials & Design, 31, (1), S2-S5. (doi:10.1016/j.matdes.2009.12.048).

Ponce de Leon, Carlos (2010) Redox flow cells: principles, characteristics and challenges At 3rd Meeting of the Mexican Society of Electrochemistry, Mexico. 31 May - 04 Jun 2010.

Qiao, Xiao Guang (2010) Development of a fabrication process for a MEMS component from ultra fine grained alloys University of Southampton, School of Engineering Sciences, Doctoral Thesis .

Qiao, Xiao Guang, Bah, Mamadou T., Zhang, Jiuwen, Gao, Nong, Moktadir, Zakaria, Kraft, Michael and Starink, Marco J. (2010) Microembossing of ultrafine grained Al: microstructural analysis and finite element modelling Journal of Micromechanics and Microengineering, 20, (10), 105002-[15pp]. (doi:10.1088/0960-1317/20/10/105002).

Qiao, Xiaoguang, Starink, Marco J. and Gao, Nong (2010) The influence of indenter tip rounding on the indentation size effect Acta Materialia, 58, (10), pp. 3690-3700. (doi:10.1016/j.actamat.2010.03.004).

Rajinikanth, V., Venkateswarlu, K., Sen, M.K., Das, M., Alhajeri, S.N. and Langdon, T.G. (2010) Influence of scandium on an Al-2% Si alloy processed by high-pressure torsion Materials Science and Engineering: B, 528, (3), pp. 1702-1706. (doi:10.1016/j.msea.2010.10.102).

Schreiber, F., Stief, P., Gieseke, A., Heisterkampa, I., Verstraete, W., DeBeer, D. and Stoodley, P. (2010) Denitrification in human dental plaque BMC Biology, 8, (24) (doi:10.1186/1741-7007-8-24).

Sha, G., Wang, Y.B., Liao, X.Z., Duan, Z.C., Ringer, S.P. and Langdon, T.G. (2010) Microstructural evolution of Fe-rich particles in an Al-Zn-Mg-Cu Alloy during equal-channel angular pressing Materials Science and Engineering: A, 527, (18-19), pp. 4742-4749. (doi:10.1016/j.msea.2010.04.041).

Sklenička, Vàclav, Král, Petr, Dvořák, Jiří, Kvapilová, Marie, Kawasaki, Megumi and Langdon, Terence G. (2010) Effect of equal-channel angular pressing on the creep resistance of precipitation-strengthened alloys Materials Science Forum, 667-669, pp. 897-902. (doi:10.4028/www.scientific.net/MSF.667-669.897).

Slade, S.M, Ralph, Tom, Ponce de Leon, Carlos, Campbell, S.A. and Walsh, F.C. (2010) The ionic conductivity of a Nafion® 1100 series of proton-exchange membranes re-cast from butan-1-ol and propan-2-ol Fuel Cells (doi:10.1002/fuce.200900118).

Slade, S.M., Smith, J.R, Campbell, S.A, Ralph, T.R, Ponce de Leon, C. and Walsh, F.C. (2010) Characterisation of a re-cast composite Nafion® 1100 series of proton exchange membranes incorporating inert inorganic oxide particles Electrochimica Acta

Starink, M.J. and Wang, Shuncai (2010) Comments on “Modelling differential scanning calorimetry curves of precipitation in Al-Cu-Mg” Scripta Materialia, 62, pp. 720-723. (doi:10.1016/j.scriptamat.2010.01.013).

Stoodley, P., Braxton, Jr. E.E., Nistico, L., Hall-Stoodley, L., Johnson, S., Quigley, M., Post, J.C., Ehrlich, G.D. and Kathju, S. (2010) Direct demonstration of a Staphylococcus biofilm in an external ventricular drain in a patient with a history of recurrent ventriculoperitoneal shunt failure Pediatric Neurosurgery, 46, (2), pp. 127-132. (doi:10.1159/000319396).

Suhot, Mohamed Azlan (2010) The effect of voids on the flexural fatigue properties of carbon/epoxy composites University of Southampton, School of Engineering Sciences, Doctoral Thesis , 239pp.

Tian, Y.Z, An, X.H, Wu, S.D, Zhang, Z.F, Figueiredo, Roberto B., Gao, N. and Langdon, T.G. (2010) Direct observations of microstructural evolution in a two-phase Cu–Ag alloy processed by high-pressure torsion Scripta Materialia, 63, (1), pp. 65-68. (doi:10.1016/j.scriptamat.2010.03.014).

Valiev, R.Z., Murashkin, M.Yu, Kilmametov, A., Straumal,, B., Chinh, N.Q. and Langdon, T.G. (2010) Unusual super-ductility at room temperature in an ultrafine-grained aluminum alloy Journal of Materials Science, 45, (17), pp. 4718-4724. (doi:10.1007/s10853-010-4588-z).

Valiev, Ruslan Z. and Langdon, Terence G. (2010) The art and science of tailoring materials by nanostructuring for advanced properties using SPD techniques [in special issue: Bulk Nanostructured Materials] Advanced Engineering Materials, 12, (8), pp. 677-691. (doi:10.1002/adem.201000019).

Venkateswarlu, K., Rajinikanth, V., Alhajeri, S.N. and Langdon, T.G. (2010) Application of high-pressure torsion to Al-Si alloys with and without scandium additions Materials Science Forum, 667-669, pp. 743-748. (doi:10.4028/www.scientific.net/MSF.667-669.743).

Venkateswarlu, K., Rajinikanth, V., Ray, Ajoy Kumar, Xu, Cheng and Langdon, Terence G. (2010) The characteristics of aluminum–scandium alloys processed by ECAP Materials Science and Engineering: A, 527, (6), pp. 1448-1452. (doi:10.1016/j.msea.2009.10.047).

Venkateswarlu, K., Rajinikanth,, V., Ray, A.K., Xu, C. and Langdon, T.G. (2010) Effect of a Scandium addition on an Al-2% Si alloy processed by ECAP Reviews on Advanced Materials Science, 25, (2), pp. 99-106.

Von Ohle, C., Gieseke, A., Nistico, L., Decker, E.M., DeBeer, D. and Stoodley, P. (2010) Real time microsensor measurement of local metabolic activities in ex vivo dental biofilms treated with chlorhexidine Applied and Environmental Microbiology, 76, (7), pp. 2326-2334. (doi:10.1128/AEM.02090-09).

Wang, Chuan Ting, Gao, Nong, Wood, Robert J.K. and Langdon, Terence G. (2010) Wear behaviour of Al-1050 alloy processed by severe plastic deformation In, Wang, Jing Tao, Figueiredo, Roberto B. and Langdon, Terence G. (eds.) Nanomaterials by Severe Plastic Deformation: NanoSPD5. Zurich, Switzerland, Trans Tech pp. 1101-1106. (Materials Science Forum, 667-669). (doi:10.4028/www.scientific.net/MSF.667-669.1101).

Wang, L. (2010) Condition monitoring research in the national Centre for Advanced Tribology at Southampton (nCATS) Condition Monitor, June, pp. 9-13.

Wang, Y.B., Liao, X.Z.., Zhao, Y.H., Lavernia, E.J., Ringer, S.P., Horita, Z., Langdon, T.G. and Zhu,, Y.T. (2010) The role of stacking faults and twin boundaries in grain refinement of a Cu–Zn alloy processed by high-pressure torsion Materials Science and Engineering: A, 527, (18-19), pp. 4959-4966. (doi:10.1016/j.msea.2010.04.036).

Wang, Yongxin, Wang, Liping, Wang, S., Zhang, Guangan, Wood, Robert and Xue, Qunji (2010) Nanocomposite microstructure and environment self-adapted tribological properties of highly hard graphite-like films Tribology letters, 40, (3), pp. 301-310. (doi:10.1007/s11249-010-9663-8).

Wang, Yongxin, Wang, Liping, Zhang, Guangan, Wang, S.C., Wood, R.J.K. and Xue, Qunji (2010) Effect of bias voltage on microstructure and properties of Ti-doped graphite-like carbon films synthesized by magnetron sputtering Surface and Coatings Technology, 205, (3), pp. 793-800. (doi:10.1016/j.surfcoat.2010.07.112).

Wood, R.J.K., Sun, D., Thakare, M.R., de Frutos Rozas, A. and Wharton, J.A. (2010) Interpretation of electrochemical measurements made during micro-scale abrasion-corrosion Tribology International, (43), pp. 1218-1227. (doi:10.1016/j.triboint.2010.01.004).

Xu, Cheng, Schroeder, Steven, Berbon, Patrick B. and Langdon, Terence G. (2010) Principles of ECAP-conform as a continuous process for achieving grain refinement: application to an aluminum alloy, Acta Materialia, 58, (4), pp. 1379-1386. (doi:10.1016/j.actamat.2009.10.044).

Xu, Feng, Helfen, Lukas, Moffat, Andrew J., Johnson, Gregory, Sinclair, Ian and Baumbach, Tilo (2010) Synchrotron radiation computed laminography for polymer composite failure studies Journal of Synchrotron Radiation, 17, (2), pp. 222-226. (doi:10.1107/S0909049510001512).

Xu, Feng, Helfen, Lukas, Moffat, Andrew J., Johnson, Gregory, Sinclair, Ian and Baumbach, Tilo (2010) Synchrotron radiation computed laminography for polymer composite failure studies Journal of Synchrotron Radiation, 17, (2), pp. 222-226. (doi:10.1107/S0909049510001512).

Yang, H. Y., Chi, X. P., Yang, S. and Evans, J. R. G. (2010) Mechanical strength of extrusion freeformed calcium phosphate filaments Journal of Materials Science: Materials in Medicine, 21, (5), pp. 1503-1510. (doi:10.1007/s10856-010-4009-5). (PMID:20145978).

Zhang, Jiu When, Starink, Marco J., Gao, Nong and Zhou, Wen Long (2010) Influence of strain reversals during high pressure torsion process on strengthening in Al-Cu-Mg (-Li) alloy Materials Science Forum, 667-669, pp. 809-814. (doi:10.4028/www.scientific.net/MSF.667-669.809).

Zhang, Jiuwen, Gao, Nong and Starink, Marco J. (2010) Al-Mg-Cu based alloys and pure Al processed by high pressure torsion: the influence of alloying additions on strengthening Materials Science and Engineering: A, 527, (15), pp. 3472-3479. (doi:10.1016/j.msea.2010.02.016).

Zhang, Y.M., Evans, J.R.G. and Yang, S.F. (2010) Detection of material property errors in handbooks and databases using artificial neural networks with hidden correlations Philosophical Magazine, 90, (33), pp. 4453-4474. (doi:10.1080/14786435.2010.510452).

Zhang, Y.M., Evans, J.R.G. and Yang, Shoufeng (2010) The prediction of solid solubility of alloys: developments and applications of Hume-Rothery’s rules The Journal of Crystallization Physics and Chemistry,, 1, (2), pp. 103-119.

Zhang, Yue, Alhajeri, Saleh N., Figueiredo, Roberto B., Gao, Nong, Wang, Jing Tao and Langdon, Terence G. (2010) Contribution of twins to the strengthening of commercial purity titanium after equal-channel angular pressing [in special issue: Nanomaterials by Severe Plastic Deformation: NanoSPD5] Materials Science Forum, 667-669, pp. 719-724. (doi:10.4028/www.scientific.net/MSF.667-669.719).

Zhao, Xicheng, Yang, Xirong, Liu, Xiiaoyan, Wang, Xingyun and Langdon, Terence G. (2010) The processing of pure titanium through multiple passes of ECAP at room temperature Materials Science and Engineering: A, 527, (23), pp. 6335-6339. (doi:10.1016/j.msea.2010.06.049).

Zhu, Yuntian T., Valiev, Ruslan Z., Langdon, Terence G., Tsuji, Nobuhiro and Lu, Ke (2010) Processing of nanostructured metals and alloys via plastic deformation [in special issue: Structural Metals at Extremes] MRS Bulletin, 35, (12), pp. 977-981.

This list was generated on Sun Mar 26 02:49:44 2017 BST.