Items where Subject is "T Technology > TJ Mechanical engineering and machinery"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
[tool] Add To Shelf...
Number of items at this level: 1277.

Ferguson, N.S., Wolfe, H.F., Ferman, M.A. and Rizzi, S.A. (eds.) (2000) Structural dynamics: recent advances, Vols 1 and 2 (Proceedings of the 7th International Conference on Recent Advances in Structural Dynamics, Southampton), Southampton, University of Southampton, 1048pp.

Wright, M. C. M. (ed.) (2004) Lecture Notes on the Mathematics of Acoustics, Imperial College Press, 308pp.

Shenoi, R.A., Groves, A. and Rajapakse, Y.D.S. (eds.) (2005) Theory and applications of sandwich structures, Southampton, UK, University of Southampton Press, 722pp.

Newman, Simon(ed.) (2005) Special issue on shipborne aviation Journal of Aerospace Engineering, 219, (5), pp. 363-469.

Mellor, B.G. (ed.) (2006) Surface Coatings for Protection against Wear, Cambridge, UK, Woodhead Publishing Limited, 429pp.

Dulieu-Barton, J.M., Lord, J.D. and Green, R.J. (eds.) (2008) Advances in experimental mechanics VI, Switzerland, Trans-Tech, 300pp. (Applied Mechanics and Materials, 13-14).

Eaton Evans, J., Dulieu-Barton, J.M. and Burguete, R.L. (eds.) (2009) Modern stress and strain analysis: a state of the art guide to measurement techniques, London, UK, Findlay Media, 41pp. (Eureka Magazine Publications).

Owens, D.H., Daley, S. and Hatonen, J.J. (Inventors) (2009) Control of processes US 11/886,930.

Rustighi, Emiliano, Ferguson, Neil, Forte, Paola, Boltežar, Miha, Brennan, Michael J., Chakraverty, Snehashish, Halkyard, Roger, Nakano, Kimihiko, Rizzi, Stephen A. and Spottswood, Stephen M. (eds.), Institute of Sound and Vibration Research (ISVR) (2013) RASD2013: 11th International Conference on Recent Advances in Structural Dynamics. Proceedings of the 11th International Conference, Southampton, GB, University of Southampton

(2015) Proceedings of the 50th UK conference on human responses to vibration Howarth, Henrietta (ed.) At 50th Uk Conference on Human Responses to Vibration, United Kingdom. 09 - 10 Sep 2015. 286 pp.

Ab Rahim, Muhajir, Waters, Timothy and Rustighi, Emiliano, (2014) Active damping control for vibration isolation of high-static-low-dynamic-stiffness isolators Sas, P., Moens, D. and Denayer, H. (eds.) At Proceedings of ISMA2014 including USD2014. , pp. 173-186.

Abdullah-Al-Mamun, Khondaker (2013) Pattern identification of movement related states in biosignals University of Southampton, Faculty of Engineering and the Environment, Doctoral Thesis , 225pp.

Abu Sharkh, S.M., Turnock, S.R. and Hughes, A.W. (2003) Design and performance of an electric tip-driven thruster Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment, 217, (3), pp. 133-147. (doi:10.1243/147509003322255840).

Abu-Sharkh, S.M. (2003) Permanent magnet machines for underwater thrusters At 5th Joint UK Magnetics Workshop. 02 - 04 Jul 2003.

Abu-Sharkh, S.M. and McBride, J.W. (2002) Voltage steps in atmospheric low current arcs between opening silver metal oxide contacts In Proceedings of the Forty-Third IEEE Holm Conference on Electrical Contacts, 1997. Institute of Electrical and Electronics Engineers., pp. 233-237. (doi:10.1109/HOLM.1997.638047).

Achintha, M. and Balan, B. (2015) An experimentally validated contour method/eigenstrains hybrid model to incorporate residual stresses in glass structural designs The Journal of Strain Analysis for Engineering Design, pp. 1-14. (doi:10.1177/0309324715601914).

Achintha, M. and Burgoyne, C. (2006) A fracture-mechanics model for debonding of external fibre reinforced polymer plates on reinforced concrete beams At 10th East Asia-Pacific Conference on Structural Engineering and Construction, Thailand. 03 - 05 Aug 2006. 6 pp.

Achintha, M. and Burgoyne, C. (2007) Fracture mechanics of plate debonding At 8th International Conference of Fiber-Reinforced Polymer Reinforcement for Reinforced Concrete Structures (FRPRCS-08), Greece. 16 - 18 Jul 2007. 10 pp.

Achintha, M. and Burgoyne, C. (2009) Fracture mechanics of plate debonding: experimental validation At 9th International Symposium on Fiber-Reinforced Polymer Reinforcement for Concrete Structures (FRPRCS-9), Australia. 13 - 15 Jul 2009. 4 pp.

Achintha, M. and Burgoyne, C. (2013) Fracture energy of the concrete-FRP interface in strengthened beams Engineering Fracture Mechanics (doi:10.1016/j.engfracmech.2013.07.016).

Achintha, M. and Burgoyne, C.J. (2009) Moment-curvature and strain energy of beams with external fiber-reinforced polymer reinforcement ACI Structural Journal, 106, (1), pp. 20-29.

Achintha, M. and Nowell, D. (2011) Eigenstrain modelling of residual stresses generated by laser shock peening Journal of Materials Processing Technology, 211, (6), pp. 1091-1101. (doi:10.1016/j.jmatprotec.2011.01.011).

Achintha, M., Nowell, D., Fufari, D., Sackett, E. and Bache, M. (2013) Fatigue behaviour of geometric features subjected to laser shock peening: experiments and modelling [in special issue: 9th Fatigue Damage of Structural Materials Conference] International Journal of Fatigue, 62, pp. 171-179. (doi:10.1016/j.ijfatigue.2013.04.016).

Achintha, Mithila, You, Chao, He, Binyan, Soady, K.A. and Reed, P.A.S. (2014) Stress relaxation in shot–peened geometric features subjected to fatigue: experiments and modelling [in special issue: Residual Stresses IX] Advanced Materials Research, 996, pp. 729-735. (doi:10.4028/www.scientific.net/AMR.996.729).

Adams, G.G., Barber, J.R., Ciavarella, M. and Rice, J.R. (2005) A paradox in sliding contact problems with friction Journal of Applied Mechanics, 72, (3), pp. 450-452. (doi:10.1115/1.1867992).

Afferante, L., Ciavarella, M., Decuzzi, P. and Demelio, G. (2003) Thermoelastic instability in a thin layer sliding between two half-planes: transient behaviour Tribology International, 36, (3), pp. 205-212. (doi:10.1016/S0301-679X(02)00185-8).

Aglietti, G.S., Langley, R.S., Rogers, E. and Gabriel, S.B. (1998) Active control strategies for equipment loaded panels In Proceedings of MOVIC '98 - The Fourth International Conference on Motion and Vibration Control. Institute of Robotics ETH. 6 pp, pp. 515-520.

Aglietti, G.S., Langley, R.S., Rogers, E., Gabriel, S.B. and Stoustrup, J. (1998) Modelling of equipment loaded panels for robust control investigations At ISMA23 International Conference on Noise & Vibration Engineering. 16 - 18 Sep 1998. , pp. 1209-1216.

Ahmad, S.M., Shaheed, M.H., Chipperfield, A.J. and Tokhi, M.O. (2002) Non-linear modelling of a one-degree-of-freedom twin-rotor multi-input system using radial basis function networks Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 216, (4), pp. 197-208.

Ahn, Byungmin, Zhilyaev, Alexander P., Lee, Han-Joo, Kawasaki, Megumi and Langdon, Terence G. (2015) Rapid synthesis of an extra hard metal matrix nanocomposite at ambient temperature Materials Science and Engineering: A, 635, pp. 109-117. (doi:10.1016/j.msea.2015.03.042).

Al-Mosawi, M.K., Bailey, W., Beduz, C., Goddard, K. and Yang, Y. (2008) Development of a coreless HTS synchronous generator operating at sub-cooled liquid nitrogen temperatures Journal of Physics: Conference Series, 97, (1), p. 12205. (doi:10.1088/1742-6596/97/1/012205).

Al-Mosawi, M.K., Goddard, K., Beduz, C. and Yang, Y. (2007) Coreless HTS synchronous generator operating at liquid nitrogen temperatures IEEE Transactions on Applied Superconductivity, 17, (2, part 2), pp. 1599-1602. (doi:10.1109/TASC.2007.899695).

Al-Mosawi, M.K., Xu, B., Beduz, C., Yang, Y. and Stephen, N.G. (2006) Improvement mechanism and bending strain tolerance for reinforced Bi2223 superconducting tapes Journal of Physics: Conference Series, (43), pp. 543-546. (doi:10.1088/1742-6596/43/1/134).

Ali, Muhammad Sarfraz (2007) Microstructural modelling of fatigue in layered bearing architectures University of Southampton, School of Engineering Sciences, Doctoral Thesis , 305pp.

Alizadeh, R., Mahmudi, R., Ngan, A.H.W., Huang, Y. and Langdon, T.G. (2015) Superplasticity of a nano-grained Mg-Gd-Y-Zr alloy processed by high-pressure torsion Materials Science and Engineering: A, 651, pp. 786-794. (doi:10.1016/j.msea.2015.10.094).

Allen, R. (2005) Bio-inspired ideas for UUV control and sensing At 7th Unmanned Underwater Vehicle Showcase. 28 - 29 Sep 2005.

Allen, R., Jackson, S., Marsden, H., McLellan, D.L. and Gore, S. (2002) Transferring people safely with manual handling equipment Clinical Rehabilitation, 16, (3), pp. 329-337.

Allen, Robert and Shi, Hong (2001) Tool wear monitoring using a combination of cutting force and vibration signals In, Comadem 2001: 14th International Congress on Condition Monitoring and Diagnostic Engineering Management. Comadem International pp. 26-32.

Alonso Vazquez, A., Lauge-Pederson, H., Lidgren, L. and Taylor, M. (2003) Ankle arthrodesis with three-screw fixation: FE analysis of initial stability At Transactions of the International Congress on Computational Bioengineering. 24 - 26 Sep 2003.

Amirante, D. and Luo, K.H. (2006) The role of three-dimensionality in the development of vortex breakdown in swirling flow At European Conference on Computational Fluid Dynamics – ECCOMAS CFD 2006. 05 - 08 Sep 2006. 11 pp.

Anderson, Edward J. and Potts, Chris N. (2004) Online scheduling of a single machine to minimize total weighted completion time Mathematics of Operations Research, 29, (3), pp. 686-697. (doi:10.1287/moor.1040.0092).

Anderton, D. (1974) Combustion as a source of diesel engine noise University of Southampton, Institute of Sound and Vibration Research, Doctoral Thesis , 314pp.

Andriotis, Orestis G. (2013) Nanostructure and mechanics of collagen fibrils from osteogenesis imperfecta mice and chronic asthma assessed with atomic force microscopy University of Southampton, Faculty of Engineering and the Environment, Doctoral Thesis , 151pp.

Anssari-Benam, A., Bader, Dan L. and Screen, H.R.C. (2011) Anisotropic time-dependant behaviour of the aortic valve Journal of the Mechanical Behavior of Biomedical Materials, 4, (8), pp. 1603-1610. (doi:10.1016/j.jmbbm.2011.02.010). (PMID:22098862).

Archibald, T.W., Ansell, J.I. and Thomas, L.C. (2004) The stability of an optimal maintenance strategy for repairable assets Proceedings of the Institution of Mechanical Engineers. Part E, Journal of Process Mechanical Engineering, 218, (2), pp. 77-82. (doi:10.1243/095440804774134253).

Arnold, James, Morioka, Miyuki and Griffin, Michael (2015) Effect of backrest on the discomfort caused by pitch oscillation in the frequency rang 0.5 to 5 Hz At 50th United Kingdom Conference on Human Responses to Vibration, United Kingdom. 09 - 10 Sep 2015. 12 pp.

Arranz, P., Anzizu, M., Pineau, S., Marwede, M., den Boer, E., den Boer, J., Cocciantelli, J.M., Williams, I.D., Obersteiner, G., Scherhaufer, S. and Vallve, X. (2014) The development of a resource-efficient photovoltaic system Proceedings of the ICE - Waste and Resource Management, 167, (WR3), pp. 109-122. (doi:10.1680/warm.13.00027).

Ashcroft, Graham and Zhang, Xin (2003) Optimized prefactored compact schemes Journal of Computational Physics, 190, (2), pp. 459-477. (doi:10.1016/S0021-9991(03)00293-6).

Astley, R.J. and Coyette, J.-P. (2001) The performance of spheroidal infinite elements International Journal for Numerical Methods in Engineering, 52, (12), pp. 1379-1396. (doi:10.1002/nme.260).

Astley, R.J. and Gamallo Ponte, P. (2004) Special short wave elements for flow acoustics Computer Methods in Applied Mechanics and Engineering, 194, (2-5), pp. 341-353. (doi:10.1016/j.cma.2004.01.042).

Atkinson, J.K. and Sion, R.P. (2001) A novel low cost sensor for measuring cylinder pressure and improving performance of an internal combustion engine Sensor Review, 22, (2), pp. 139-148. (doi:10.1108/02602280210697230).

Avril, Stéphane, Feissel, Pierre, Pierron, Fabrice and Villon, Pierre (2009) Comparison of two approaches for differentiating full-field data in solid mechanics Measurement Science and Technology, 21, (1), 11pp. (doi:10.1088/0957-0233/21/1/015703).

Azarpeyvand, Mahdi (2008) Some aspects of RANS based jet noise prediction University of Southampton, Institute of Sound and Vibration Research, Doctoral Thesis , 191pp.

Bah, M.T., Shi, Junfen, Heller, Markus O., Suchier, Yanneck, Lefebvre, Fabien, Young, Philippe, King, Leonard, Dunlop, Douglas G., Boettcher, Mick, Draper, Edward and Browne, Martin (2015) Inter-subject variability effects on the primary stability of a short cementless femoral stem Journal of Biomechanics, 48, (6), pp. 1032-1042. (doi:10.1016/j.jbiomech.2015.01.037).

Bahaj, A.S., Molland, A.F., Chaplin, J.R. and Batten, W.M.J. (2007) Power and thrust measurements of marine current turbines under various hydrodynamic flow conditions in a cavitation tunnel and a towing tank Renewable Energy, 32, (3), pp. 407-426. (doi:10.1016/j.renene.2006.01.012).

Bailey, J.D. and Hill, M. (1998) The use of a hypermedia system to develop confidence in engineering design International Journal of Mechanical Engineering, 26, (2), pp. 111-125.

Bailey, W.O.S, Al-Mosawi, M., Yang, Yifeng, Goddard, K. and Beduz, C. (2009) The Design of a Lightweight HTS Synchronous Generator Cooled by Subcooled Liquid Nitrogen IEEE Transactions on Applied Superconductivity, 19, (3), pp. 1674-1677. (doi:10.1109/TASC.2009.2017841).

Balan, B. and Achintha, M. (2014) Characterisation of residual stress in glass At 8th International Conference on Advanced Computational Engineering and Experiment, France. 30 Jun - 03 Jul 2014. 1 pp.

Banerjee, S. and Bhaskar, A. (2008) The applicability of the effective medium theory to the dynamics of cellular beams International Journal of Mechanical Sciences, 51, (8), pp. 598-608. (doi:10.1016/j.ijmecsci.2009.06.001).

Bardow, A., Karlin, I.V. and Gusev, A.A. (2006) General characteristic-based algorithm for off-lattice Boltzmann simulations Europhysics Letters, 75, (3), pp. 434-440. (doi:10.1209/epl/i2006-10138-1).

Barlow, Chris, Lewis, Darren, Bell, Jonathon, Irps, Thomas, Prior, Stephen D. and Erbil, Mehmet Ali (2010) Developing a low-cost beer dispensing robotic system for the service industry At 25th International Conference on CAD/CAM, Robotics and Factories of the Future, South Africa. 13 - 16 Jul 2010.

Barney, A., De Stefano, A. and Shadle, C. (2002) Pressure and airflow measurements in a dynamic mechanical model of the larynx and vocal tract At Forum Acousticum. 16 - 20 Sep 2002.

Barney, A., De Stefano, A. and Shadle, C.H. (2002) Pressure and flow measurements in a dynamic mechanical model of the larynx and vocal tract Revista de acustica, XXXIII, (1)

Barney, A. and Jackson, P.J.B. (2009) A model of jet modulation in voiced fricatives In Proceedings of the International Conference on Acoustics NAG/DAGA 2009, Rotterdam, Holland, 23-26 March 2009. NAG-DAGA., pp. 1733-1736.

Barnsley, Lester C., Carugo, Dario, Aron, Miles and Stride, Eleanor (2017) Understanding the dynamics of superparamagnetic particles under the influence of high field gradient arrays Physics in Medicine and Biology, pp. 1-37.

Barrett, J.F. (2012) Nonlinear system analysis by Volterra and Hermite functional expansions, Southampton, GB, University of Southampton, 116pp.

Barrett, T.R., Bressloff, N.W. and Keane, A.J. (2006) Airfoil design and optimization using multi-fidelity analysis and embedded inverse design At 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. 01 - 04 May 2006. 21 pp, pp. 1-21.

Basri, B. and Griffin, M.J. (2010) Discomfort caused by x-axis vibration of the back: effect of backrest inclination At 45th UK Conference on Human Response to Vibration, United Kingdom. 06 - 08 Sep 2010.

Basri, B. and Griffin, M.J. (2011) Equivalent comfort contours for whole-body vertical vibration: effect of backrest inclination At 46th UK Conference on Human Response to Vibration, United Kingdom. 20 - 22 Sep 2011.

Basri, B. and Griffin, M.J. (2012) Equivalent comfort contours for vertical seat vibration: effect of vibration magnitude and backrest inclination Ergonomics, 55, (8), pp. 909-922. (doi:10.1080/00140139.2012.678390). (PMID:22533797).

Battams, G.P., Dulieu-Barton, J.M. and Boyd, S.W., (2010) Evaluation of edge cracks in cross-ply laminates using image correlation and thermoelastic stress analysis Dulieu-Barton, J.M. and Mines, R.A.W. (eds.) In Advances in Experimental Mechanics VII. Trans Tech. 8 pp, pp. 227-232. (doi:10.4028/www.scientific.net/AMM.24-25.91).

Battams, Gary (2014) The use of optical techniques to assess the damage tolerance of composite materials University of Southampton, Faculty of Engineering and the Environment, Doctoral Thesis , 273pp.

Batten, W.M.J., Bressloff, N.W. and Turnock, S. (2002) Transition from vortex to wall driven turbulence production in the Taylor-Couette system with a rotating inner cylinder International Journal for Numerical Methods in Fluids, 38, (3), pp. 207-226. (doi:10.1002/fld.208).

Baumgartl, Thomas and Koeck, Bernhard (2004) Modelling volume change and mechanical properties with hydraulic models SSSAJ Soil Science Society of America Journal, 68, (1), pp. 57-65. (doi:10.2136/sssaj2004.5700).

Bazoune, A., Khulief, Y.A. and Stephen, N.G. (1999) Further results for modal characteristics of rotating tapered Timoshenko beams Journal of Sound and Vibration, 219, (1), pp. 157-174. (doi:10.1006/jsvi.1998.1906).

Bele, E., Goel, A., Pickering, E.G., Borstnar, G., Katsamenis, O.L., Pierron, F., Danas, K. and Deshpande, V.S. (2017) Deformation mechanisms of idealised cermets under multi-axial loading Journal of the Mechanics and Physics of Solids, pp. 1-31. (doi:10.1016/j.jmps.2017.01.002).

Bello, J.O., Wood, R.J.K. and Wharton, J.A. (2007) Synergistic effects of micro-abrasion–corrosion of UNS S30403, S31603 and S32760 stainless steels Wear, 263, (1 - 6), pp. 149-159. (doi:10.1016/j.wear.2006.12.044).

Benassi, L., Elliott, S.J. and Gardonio, P. (2003) Active vibration isolation using an inertial actuator with local feedback control At Tenth International Congress on Sound and Vibration (ICSV10). 07 - 10 Jul 2003. , pp. 109-116.

Berardi, Umberto, Mace, Brian, Rustighi, Emiliano and Sarban, Rahimullah (2010) Dynamic testing and modelling of DEAP push actuators At Actuator 2010: The 12th International Conference on New Actuators, Germany. 14 - 16 Jun 2010.

Bergamini, G., Ciavarella, M. and Demelio, G. (2001) Recent trends in structural design of ultra-light refrigerated semitrailers International Journal of Heavy Vehicle Systems, 8, (2), pp. 142-154.

Bergmann, Georg, Bender, Alwina, Graichen, Friedmar, Dymke, Joern, Rohlmann, Antonius, Trepczynski, Adam, Heller, Markus O. and Kutzner, Ines (2014) Standardized loads acting in knee implants PLoS ONE, 9, (1), e86035-[12pp]. (doi:10.1371/journal.pone.0086035).

Beriot, Hadrien, Prinn, Albert and Gabard, Gwenael (2015) Efficient implementation of high-order finite elements for Helmholtz problems International Journal for Numerical Methods in Engineering, 106, (3), pp. 213-240. (doi:10.1002/nme.5172).

Berry, Alain, Robin, Olivier and Pierron, Fabrice (2014) Identification of dynamic loading on a bending plate using the virtual fields method Journal of Sound and Vibration, 333, (26), pp. 7151-7164. (doi:10.1016/j.jsv.2014.08.038).

Beshara, M. and Keane, A.J. (1997) Vibrational energy flows in beam networks with compliant and dissipative joints Journal of Sound and Vibration, 203, (2), pp. 321-339. (doi:10.1006/jsvi.1996.0889).

Beshara, M. and Keane, A.J., (1997) Vibrational energy flows between two plates forming an L-shape and joined by compliant and dissipative couplings Fahy, F.J. and Price, W.G. (eds.) In Proceedings of the IUTAM Symposium held in Southampton, UK 8-11 July 1997. Springer., pp. 131-142.

Bharj, T., Lalor, N. and Stimpson, G. (2000) An experimental SEA model of a car constructed from very few measurements In, European Conference on Vehicle Noise and Vibration, IMechE Headquarters, London, UK, 11-12 June 2002. London, IMechE pp. 217-226. (Paper No. C577/016/2000).

Bhaskar, Atul (2011) Group velocity of elastic waves as eigensensitivity of a parameter dependent eigenvalue problem International Journal of Mechanical Sciences, 55, (1), 42 - 49. (doi:10.1016/j.ijmecsci.2011.12.001).

Bhaskar, K.V., Bressloff, N.W., Nair, P.B. and Shearman, C.P. (2008) Predictive haemodynamics in a one-dimensional human carotid artery bifurcation. Part II: application to graft design IEEE Transactions on Biomedical Engineering, 55, (3), pp. 1176-1184. (doi:10.1109/TBME.2007.912398). (PMID:18334411).

Bianchi, G., Aglietti, G. and Richardson, G. (2008) Static performance of hot bonded inserts in honeycomb panels At 49th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference. 07 - 10 Apr 2008.

Bilek, Jaromir (2006) Sensors for thermal conductivity at high temperatures University of Southampton, School of Engineering, Doctoral Thesis , 191pp.

Bin Kamaruddin, Shamsul (2013) Long-term mechanical properties of rubber University of Southampton, Engineering and the Environment, Doctoral Thesis , 344pp.

Blanco, Max (2009) Proposal for an AUV refuel station In OCEANS 2009 , MTS / IEEE Biloxi - Marine Technology for Our Future: Global and Local Challenges. Institute of Electrical and Electronics Engineers..

Bolland, B.J.R.F., Culliford, D.J., Langton, D.J., Millington, J.P.S., Arden, N.K. and Latham, J.M. (2011) High failure rates with a large-diameter hybrid metal-on-metal total hip replacement: clinical, radiological and retrieval analysis Journal of Bone and Joint Surgery, British Volume, 93, (5), pp. 608-615. (doi:10.1302/0301-620X.93B5.26309). (PMID:21511925).

Boltovets, N.S., Dugaev, V.K, Kholevchuk, V.V, McDonald, P.C, Mitin, V.F, Nemish, I.Yu, Pavese, F, Sorokin, P.V., Soloviev, E.A and Venger, E.F (2003) New generation of resistance thermometers based on Ge films on GaAs substrates In, Mitin, V.F and McDonald, P.C (eds.) Temperature: its Measurement and Control in Science and Industry. Eighth International Temperature Symposium American Institute of Physics pp. 399-404. (AIP Conference Proceedings 684, 7).

Boltryk, P.J., Hill, M. and McBride, J.W. (2007) Comparing laser and polychromatic confocal optical displacement sensors for the 3-D measurement of cylindrical artefacts containing microscopic grooved structures At 11th International Conference on Metrology & Properties of Engineering Surfaces. 17 - 20 Jul 2007.

Boltryk, Rosemary J., Hirawa, Shungo, Okada, Tetsuo, Glynne-Jones, Peter and Hill, Martyn (2009) Ultrasonic trapping of beads in a straight channel At USWNet (Ultrasonic Standing Wave Network) 2009. 30 Nov - 03 Dec 2009.

Boltryk, Rosie, Hirawa, Shunga, Okada, Tetsuo, Glynne-Jones, Peter and Hill, Martyn (2009) Ultrasonic trapping of beads in a straight channel At IEEE International Ultrasonics Symposium. 20 - 23 Sep 2009.

Bonello, P., Brennan, M.J. and Holmes, R. (2002) Non-linear modelling of rotor dynamic systems with squeeze film dampers - an efficient integrated approach Journal of Sound and Vibration, 249, (4), pp. 743-773. (doi:10.1006/jsvi.2001.3911).

Booth, J.E., Harvey, T.J., Wood, R.J. and Powrie, H.E.G. (2010) Scuffing detection of TU3 cam–follower contacts by electrostatic charge condition monitoring Tribology International, 43, (1-2), pp. 113-128. (doi:10.1016/j.triboint.2009.05.004).

Booth, J.E., Nelson, K., Harvey, T.J., Wang, L., Wood, R. J., Yamaguchi, E.S., Harrison, J.J. and Powrie, H.E.G. (2006) Discussion. The feasibility of using electrostatic monitoring to identify diesel lubricant additives and soot contamination interactions by factorial analysis Tribology International, 39, (12), II-III. (doi:10.1016/j.triboint.2006.04.001).

Booth, J.E., Nelson, K.D., Harvey, T.J., Wood, R.J.K., Wang, L., Powrie, H.E.G. and Martinez, J.G. (2006) The feasibility of using electrostatic monitoring to identify diesel lubricant additives and soot contamination intercations by factorial analysis Tribology International, 39, (12), pp. 1564-1575. (doi:10.1016/j.triboint.2006.04.004).

Borstnar, G., Mavrogordato, M.N., Helfen, L., Sinclair, I. and Spearing, S.M. (2015) Interlaminar fracture micro-mechanisms in toughened carbon fibre reinforced plastics investigated via synchrotron radiation computed tomography and laminography Composites Part A Applied Science and Manufacturing, 71, pp. 176-183. (doi:10.1016/j.compositesa.2015.01.012).

Bose, K., Wood, R.J.K. and Wheeler, D.W. (2005) High energy solid particle erosion mechanisms of superhard CVD coatings Wear, 259, (1-6), pp. 135-144. (doi:10.1016/j.wear.2005.02.043).

Boselli, J., Pitcher, P.D., Gregson, P.J. and Sinclair, I. (2001) Numerical modelling of particle distribution effects on fatigue in Al–SiCp composites Materials Science and Engineering: A, 300, (1-2), pp. 113-124. (doi:10.1016/S0921-5093(00)01671-3).

Bourdier, S. and Chaplin, J.R. (2012) Vortex-induced vibrations of a rigid cylinder on elastic supports with endstops. Part 1: experimental results Journal of Fluids and Structures, 29, (1), pp. 62-78. (doi:10.1016/j.jfluidstructs.2011.12.014).

Boyd, S.W., Dulieu-Barton, J.M., Thomsen, O.T. and El-Gazzani, S. (2010) Through thickness stress distributions in pultruded GRP materials Composite Structures, 92, (3), pp. 662-668. (doi:10.1016/j.compstruct.2009.09.027).

Boyd, S.W., Dulieu-Barton, J.M., Thomsen, O.T. and Gheradi, A. (2007) Stress analysis of bonded joints in pultruded GRP components At Sixteenth International Conference on Composite Materials (ICCM 16), Japan. 08 - 13 Jul 2007. 9 pp.

Boyd, S.W., Dulieu-Barton, J.M., Thomsen, O.T. and Gheradi, A. (2008) Development of a finite element model for analysis of pultruded structures using thermoelastic data Composites Part A: Applied Science and Manufacturing, 39, (8), pp. 1311-1321. (doi:10.1016/j.compositesa.2008.03.017).

Bozhevolnaya, E., Jakobsen, J. and Thomsen, O.T. (2009) Fatigue performance of sandwich beams with peel stoppers Strain, 45, (4), pp. 349-357. (doi:10.1111/j.1475-1305.2007.00413.x).

Brennan, M.J. (2000) Actuators for active vibration control - tunable resonant devices International Journal of Applied Mechanics and Engineering, 5, (1), pp. 63-74.

Brennan, M.J. and Dayou, J. (2000) Global control of vibration using a tunable vibration neutralizer Journal of Sound and Vibration, 232, (3), pp. 585-600. (doi:10.1006/jsvi.1999.2757).

Brennan, M.J. and Kidner, M.R.F., (2000) Improving the performance of a vibration neutraliser by controlling its stiffness and damping Pollack, M.L. (ed.) In Proceedings of the ASME Noise Control And Acoustics Division, International Mechanical Engineering Congress and Exposition, 5-10 Nov 2000, Orlando Florida. American Society of Mechanical Engineers., pp. 385-392.

Brennan, M.J. and To, W.M., (2000) Modelling of rigid-frame porous materials - a simple approach Pollack, M.L. (ed.) In Proceedings of the ASME Proceedings Noise Control And Acoustics Division, International Mechanical Engineering Congress and Exposition, 5-10 Nov 2000, Orlando Florida. American Society of Mechanical Engineers., pp. 479-485.

Bressloff, N.W., Forrester, A.I.J., Banks, J. and Bhaskar, K.V. (2004) Shape optimization of the carotid artery bifurcation At 5th ASMO-UK / ISSMO conference on Engineering Design Optimization. 12 - 13 Jul 2004.

Bressloff, Neil W., Banks, Jim and Bhaskar, K. Vijaya (2004) Parametric geometry modeling of the carotid artery bifurcation: the need for new flow metrics At International Workshop on Flow and Motion. 11 - 13 Jul 2004. 2 pp, pp. 1-2.

Briscoe, A., Saffari, N. and New, A.M.R. (2007) An ultrasound technique for monitoring polymerisation of acrylic bone cement At 53rd Annual Meeting of the Orthopaedic Research Society. 11 - 14 Feb 2007.

Briscoe, Adam, Perillo-Marcone, Antonio and Taylor, Mark (1970) The effect of tibial tray and articular surface geometry on tibial bone strains At 54th Annual Meeting of the Orthopaedic Research Society. 02 - 05 Mar 2008. 1 pp, p. 1966.

Bryan, Rebecca, Taylor, Mark and Nair, Prasanth (1970) Use of a statistical model of geometry and material properties in a 1000 femur study of femoral neck fracture risk At 55th Annual Meeting of the Orthopaedic Research Society. 22 - 25 Feb 2009. 1 pp, p. 798.

Bucchi, Andrea and Hearn, Grant E. (2013) Predictions of aneurysm formation in distensible tubes: Part A — theoretical background to alternative approaches International Journal of Mechanical Sciences, 71, pp. 1-20. (doi:10.1016/j.ijmecsci.2013.02.005).

Buldakov, E.V., Chernyshenko, S.I. and Ruban, A.I. (2000) On the uniqueness of steady flow past a rotating cylinder with suction Journal of Fluid Mechanics, 411, pp. 213-232. (doi:10.1017/S0022112099008162).

Bull, D.J., Helfen, L., Sinclair, I., Spearing, S.M. and Baumbach, T. (2012) A comparison of multi-scale 3D X-ray tomographic inspection techniques for assessing carbon fibre composite impact damage Composites Science and Technology, 75, pp. 55-61. (doi:10.1016/j.compscitech.2012.12.006).

Bull, D.J., Scott, A.E., Spearing, S.M. and Sinclair, I. (2013) The influence of toughening-particles in CFRPs on low velocity impact damage resistance performance Composites Part A Applied Science and Manufacturing, 58, pp. 47-55. (doi:10.1016/j.compositesa.2013.11.014).

Bull, D.J., Sinclair, I. and Spearing, S.M. (2013) Partial volume correction for approximating crack opening displacements in CFRP material obtained from micro-focus X-ray CT scans Composites Science and Technology, 81, pp. 9-16. (doi:10.1016/j.compscitech.2013.03.017).

Bull, D.J., Spearing, S.M. and Sinclair, I. (2014) Observations of damage development from compression-after-impact experiments using ex situ micro-focus computed tomography Composites Science and Technology, 97, pp. 106-114. (doi:10.1016/j.compscitech.2014.04.008).

Bull, D.J., Spearing, S.M. and Sinclair, I. (2015) Investigation of the response to low velocity impact and quasi-static indentation loading of particle-toughened carbon-fibre composite materials Composites Part A: Applied Science and Manufacturing, 74, pp. 38-46. (doi:10.1016/j.compositesa.2015.03.016).

Bull, D.J., Spearing, S.M., Sinclair, I. and Helfen, L. (2013) Three-dimensional assessment of low velocity impact damage in particle toughened composite laminates using micro-focus X-ray computed tomography and synchrotron radiation laminography Composites Part A: Applied Science and Manufacturing, 52, pp. 62-69. (doi:10.1016/j.compositesa.2013.05.003).

Burgoyne, C., Achintha, M. and Guan, G. (2012) Prediction of FRP debonding Using the global-energy-balance approach At Special Session at ACI 2012 Spring Convention on Fracture Mechanics Applied to FRP Debonding, United States. 18 - 22 Mar 2012.

Burke Veliz, Allan (2009) Finite element modelling of fatigue crack growth in multi-layered architectures University of Southampton, School of Engineering Sciences, Doctoral Thesis , 281pp.

Burke-Veliz, A., Syngellakis, S. and Reed, P.A.S. (2012) Assessment of three-dimensional crack growth in ductile layered material systems Engineering Fracture Mechanics, 88, pp. 15-27. (doi:10.1016/j.engfracmech.2012.03.007).

Burke-Veliz, Allan, Reed, Philippa A.S. and Syngellakis, Stavros (2009) A numerical study of crack shielding and de?ection under extensive plasticity Engineering Fracture Mechanics, 76, (9), pp. 1345-1356. (doi:10.1016/j.engfracmech.2009.02.003).

Caine, Marcus, Carugo, Dario, Zhang, Xunli, Hill, Martyn, Dreher, Matthew R. and Lewis, Andrew L. (2017) Review of the development of methods for characterization of microspheres for use in embolotherapy: translating Bench to Cathlab Advanced Healthcare Materials

Callisti, M. (2014) Microstructural and nanomechanical characterisation of Ni-Ti(-Cu) shape memory alloy thin films for tribology University of Southampton, Engineering and the Environment, Doctoral Thesis , 241pp.

Callisti, M. and Polcar, T. (2015) Structural and mechanical properties of irradiated multilayer nanocomposites At Irradiation Effects in Nuclear Materials, United Kingdom. 23 - 25 Sep 2015.

Callisti, M., Tichelaar, F.D., Mellor, B.G. and Polcar, T. (2013) Effects of Cu on the microstructural and mechanical properties of sputter deposited Ni-Ti thin films [in special issue: Proceedings of the 40th International Conference on Metallurgical Coatings and Thin Films (ICMCTF 2013)] Surface and Coatings Technology, 237, pp. 261-268. (doi:10.1016/j.surfcoat.2013.06.040).

Callisti, Mauro, Polcar, T. and Sergio, Lozano-Perez (2015) Structural and mechanical properties of ?-irradiated Zr/Nb multilayer nanocomposites Materials Letters, 163, pp. 138-141. (doi:10.1016/j.matlet.2015.10.057).

Cambiella, A., Benito, J.M., Pazos, C., Coca, J., Ratoi, M. and Spikes, H.A. (2006) The effect of emulsifier concentration on the lubricating properties of oil-in-water emulsions Tribology letters, 22, (1), pp. 53-65. (doi:10.1007/s11249-006-9072-1).

Camillacci, R., Ferguson, N.S. and White, P.R. (2005) Simulation and experimental validation of modal analysis for non-linear symmetric systems Mechanical Systems and Signal Processing, 19, (1), pp. 21-41. (doi:10.1016/j.ymssp.2004.05.002).

Campbell, N.G. (2011) Effects of ageing on dichotic listening At British Society of Audiology Annual Conference 2011, United Kingdom. 07 - 09 Sep 2011.

Campbell, N.G. (2012) An evidenced-based approach to management of APD (oral presentation - invited speaker) At Auditory Processing Disorder Masterclass, United Kingdom. 09 - 11 Oct 2012.

Campbell, N.G. (2012) Language disorders in children and APD (oral presentation - invited speaker) At Auditory Processing Disorder Masterclass, United Kingdom. 09 - 11 Oct 2012.

Campbell, N.G. (2012) Multidisciplinary assessment of APD and the test battery approach (oral presentation - invited speaker) At Auditory Processing Disorder Masterclass, United Kingdom. 09 - 11 Oct 2012.

Campbell, N.G. (2013) Update on the work of the steering group of the British society of audiology on APD (oral presentation - invited speaker) At APD Awareness Day, United Kingdom. 11 Jun 2013.

Campbell, N.G., Loo, J., Bamiou, D. and Luxon, L.M. (2012) Computer-based auditory training (CBAT): benefits for children with language- and reading-related learning difficulties At American Academy of Audiology Annual Conference 2012: Global Perspectives on (C)APD, United States. 30 - 31 Mar 2012.

Cao, Furong, Li, Zhuoliang, Zhang, Nianxian, Ding, Hua, Yu, Fuxiao and Zuo, Liang (2013) Superplasticity, flow and fracture mechanism in an Al-12.7SI-0.7Mg alloy Materials Science and Engineering: A, 571, pp. 167-183. (doi:10.1016/j.msea.2013.02.010).

Cao, Q.J., Xiong, Y.P. and Wiercigroch, M. (2013) Nonlinear dynamics of an irrational oscillator At Nonlinear Dynamics in Engineering: Modelling, Analysis and Applications, United Kingdom. 21 - 23 Aug 2013.

Cao, Y., Wang, Y.B., An, X.H., Liao, X.Z., Kawasaki, M., Ringer, S.P., Langdon, T.G. and Zhu, Y.T. (2013) Concurrent microstructural evolution of ferrite and austenite in a duplex stainless steel processed by high-pressure torsion Acta Materialia, 63, pp. 16-29. (doi:10.1016/j.actamat.2013.09.030).

Capretto, Lorenzo, Carugo, Dario, Mazzitelli, Stefania, Nastruzzi, Claudio and Zhang, Xunli (2013) Microfluidic and lab-on-a-chip preparation routes for organic nanoparticles and vesicular systems for nanomedicine applications Advanced Drug Delivery Reviews, 65, (11-12), pp. 1496-1532. (doi:10.1016/j.addr.2013.08.002). (PMID:23933616).

Carmichael, A.R. (1983) Numerical methods for stress analysis using known elasticity solutions University of Southampton, Mechanical Engineering, Doctoral Thesis , 232pp.

Carmignani, C., Forte, P. and Rustighi, E. (2000) Controllo attivo della dinamica dei rotori mediante attuatori piezoelettrici At XXIX Convegno Nazionale dell'Associazione Italiana per l'Analisi delle Sollecitazioni, Italy. 06 - 09 Sep 2000.

Carmignani, C., Forte, P. and Rustighi, E. (2001) Analisi delle vibrazioni nell'affilatura di lame a disco At XXX Convegno Nazionale dell'Associazione Italiana per l'Analisi delle Sollecitazioni, Italy. 12 - 15 Sep 2001.

Carmignani, C., Forte, P. and Rustighi, E. (2002) Identificazione dei coefficienti dinamici di sistemi meccanici tramite la tecnica delle funzioni modulanti At XXXI Convegno Nazionale dell'Associazione Italiana per l'Analisi delle Sollecitazioni, Italy. 18 - 21 Sep 2002.

Carmignani, C., Forte, P. and Rustighi, E. (2003) Controllo vibrazionale semi-attivo di un rotore flessibile tramite smorzatore a squeeze-film magnetoreologico At XXXII Convegno Nazionale dell'Associazione Italiana per l'Analisi delle Sollecitazioni, Italy. 03 - 06 Sep 2003.

Carmignani, C., Forte, P. and Rustighi, E. (2003) Studio sperimentale su un modello di lama a disco delle vibrazioni indotte dal processo di affilatura At XXXII Convegno Nazionale dell'Associazione Italiana per l'Analisi delle Sollecitazioni, Italy. 03 - 06 Sep 2003.

Carreno, Sebastian, Wilson, P.A., Ridao, Pere and Petillot, Yvan (2010) A survey on terrain based navigation for AUVs At OCEANS 2010 MTS/IEEE Seattle, United States. 20 - 23 Sep 2010.

Carriero, A., Doube, M., Vogt, M., Busse, B., Zustin, J., Levchuk, A., Schneider, P., Müller, R. and Shefelbine, S.J. (2013) Altered lacunar and vascular porosity in osteogenesis imperfecta mouse bone as revealed by synchrotron tomography contributes to bone fragility Bone, 61, pp. 116-124. (doi:10.1016/j.bone.2013.12.020). (PMID:24373921).

Carroll, S.P., Owen, J.S. and Hussein, M.F.M. (2010) Modelling crowd-bridge interaction with a discretely defined crowd At SECED Young Engineers Conference, United Kingdom. 04 Nov 2010.

Carugo, Dario, Bottaro, Elisabetta, Owen, Joshua, Stride, Eleanor and Nastruzzi, Claudio (2016) Liposome production by microfluidics: potential and limiting factors Scientific Reports, 6, (25876), pp. 1-15. (doi:10.1038/srep25876).

Carugo, Dario, ElMahdy, Motaz, Zhao, Xuefeng, Drake, Marcus, Zhang, Xunli and Clavica, Francesco (2013) An artificial model for studying fluid dynamics in the obstructed and stented ureter Proc. IEEE Engineering in Medicine and Biology Conference (EMBC), pp. 5335-5338. (doi:10.1109/EMBC.2013.6610754). (PMID:24110941).

Carugo, Dario, Lee, Jeong Yu, Pora, Anne, Browning, Richard J., Capretto, Lorenzo, Nastruzzi, Claudio and Stride, Eleanor (2016) Facile and cost-effective production of microscale PDMS architectures using a combined micromilling-replica moulding (uMi-REM) technique Biomedical Microdevices, 18, (4), pp. 1-10. (doi:10.1007/s10544-015-0027-x). (PMID:26747434).

Carugo, Dario, Owen, Joshua, Crake, Calum, Lee, Jeong Yu and Stride, Eleanor (2015) Biologically and acoustically compatible chamber for studying ultrasound-mediated delivery of therapeutic compounds Ultrasound in Medicine & Biology, 41, (7), pp. 1927-1937. (doi:10.1016/j.ultrasmedbio.2015.03.020). (PMID:25922133).

Casagrande, Giustina, Borlotti, Alessandra, Carugo, Dario, Fumero, Roberto and Costantino, Maria Laura (2010) Two-pool physical simulator of the inter-compartmental mass transfer during dialysis [in: ASAIO Abstracts for the 56th Annual Conference] ASAIO Journal, 56, (2), p. 123. (doi:10.1097/01.mat.0000369378.72745.49).

Casanova, Michele, Schindeler, Aaron, Little, David, Müller, Ralph and Schneider, Philipp (2014) Quantitative phenotyping of bone fracture repair: a review BoneKEy Reports, 3, (550), pp. 1-8. (doi:10.1038/bonekey.2014.45). (PMID:25120907).

Celotta, D.W., Qureshi, U.A., Stepanov, E.V., Goulet, D.P., Hunter, J., Buckberry, C.H., Hill, R., Sherikar, S.V., Moshrefi-Torbati, M. and Wood, R.J.K. (2007) Sand erosion testing of novel compositions of hard ceramics Wear, 263, (1-6), pp. 278-283. (doi:10.1016/j.wear.2007.01.098).

Chambers, A.R., Earl, J.S., Squires, C.A. and Suhot, M.A. (2006) The effect of voids on the flexural fatigue performance of unidirectional carbon fibre composites developed for wind turbine applications International Journal of Fatigue, 28, (10), pp. 1398-1396. (doi:10.1016/j.ijfatigue.2006.02.033).

Chambers, Lily D., Stokes, Keith R., Walsh, Frank C. and Wood, Robert J.K. (2006) Modern approaches to marine antifouling coatings Surface and Coatings Technology, 201, (6), pp. 3642-3652. (doi:10.1016/j.surfcoat.2006.08.129).

Chanda, S., Dickinson, A.S., Gupta, S. and Browne, M. (2015) Full-field in vitro measurements and in silico predictions of strain shielding in the implanted femur after total hip arthroplasty Proceedings of the Institution of Mechanical Engineers Part H: Journal of Engineering in Medicine, 229, (8), pp. 549-559. (doi:10.1177/0954411915591617). (PMID:26112349).

Chaplin, J.R. and Mouazé, D. (2004) Disturbed-laminar flow over an oscillating cylinder At XXI International Congress of Theoretical and Applied Mechanics. 15 - 21 Aug 2004.

Checa-Esteban, S. and New, A.M.R. (1970) Simulation of a knee implanted with an interpositional spacer during a gait cycle using explicit finite element analysis At 5th World Congress of Biomechanics. 19 Jul - 04 Aug 2006.

Checa-Esteban, S., New, A.M.R. and Taylor, M. (1970) Effects of ligament pretension on the biomechanics of the knee: a finite element analysis At 52nd Annual Meeting of the Orthopaedic Research Society. 19 - 22 Mar 2006.

Checa-Esteban, S., New, A.M.R. and Taylor, M. (2007) Degeneration propensity of articular cartilage in a knee implanted with an interpositional spacer At European Society of Biomechanics Workshop 2007: Finite Element Modelling in Biomechanics & Mechanobiology. 26 - 28 Aug 2007.

Cheer, Jordan and Daley, Stephen (2014) A method of adaptation between steepest-descent and Newton's algorithm for multichannel active control of tonal noise and vibration In Proceedings of the 21st International Congress on Sound and Vibration. International Institute of Acoustics and Vibration. 8 pp.

Cheer, Jordan and Daley, Stephen (2014) Multivariable control of tonal disturbances using minimization of the maximum error signal through adaptive error signal weighting At inter.noise 2014: 43rd International Congress on Noise Control Engineering: Improving the World through Noise Control, Australia. 16 - 19 Nov 2014.

Cheer, Jordan and Daley, Stephen (2015) Broadband active control of noise and vibration in a fluid-filled pipeline using an array of non-intrusive structural actuators At 44th International Congress on Noise Control Engineering (inter.noise 2015), United States. 09 - 12 Aug 2015. 10 pp.

Cheer, Jordan and Elliott, Stephen J. (2014) The design and performance of feedback controllers for the attenuation of road noise in vehicles International Journal of Acoustics and Vibration, 19, (3), pp. 155-164.

Chen, J., Dawe, D.J. and Wang, S. (2000) Nonlinear transient analysis of rectangular composite laminated plates Composite Structures, 49, (2), pp. 129-139. (doi:10.1016/S0263-8223(99)00108-7).

Chen, Kuo-Shen, Ayon, A.A., Zhang, Xin and Spearing, S.M. (2002) Effect of process parameters on the surface morphology and mechanical performance of silicon structures after deep reactive ionetching (DRIE) Journal of Microelectromechanical Systems, 11, (3), pp. 264-275. (doi:10.1109/JMEMS.2002.1007405).

Chen, M.H. and Brennan, M.J. (1997) Combining the active control of gear vibration with condition monitoring University of Southampton 47pp. , Southampton, GB (ISVR Technical Memorandum, 824).

Chen, M.H. and Brennan, M.J. (2000) Active control of gear vibration using specially configured sensors and actuators Smart Materials and Structures, 9, (3), pp. 342-350. (doi:10.1088/0964-1726/9/3/315).

Chen, Y.G., Djidjeli, K. and Price, W.G. (2009) Numerical simulation of liquid sloshing phenomena in partially filled containers Computers & Fluids, 38, pp. 830-842. (doi:10.1016/j.compfluid.2008.09.003).

Chernyshenko, S.I. (2001) Large-scale instability of the flow past an airfoil in the presence of other bodies At VIII All-Russian Congress on Theoretical and Applied Mechanics. 23 - 29 Aug 2001. 1 pp.

Chetwynd, D., Mustapha, F., Worden, K., Rongong, J.A., Pierce, S.G. and Dulieu-Barton, J.M. (2007) Damage location in a stiffened composite panel using lamb waves and neural networks At 25th International Modal Analysis Conference (IMAC XXV). 19 - 22 Feb 2007. 9 pp.

Cheung, Julie, Scanlan, James and Wiseall, Steve, (2008) Value driven design: an initial study applied to novel aerospace components in Rolls-Royce plc Curran, Richard, Chou, Shuo-Yan and Trappey, Amy (eds.) In Collaborative Product and Service Life Cycle Management for a Sustainable World: Proceedings of the 15th ISPE International Conference on Concurrent Engineering (CE2008). Springer. 8 pp, pp. 241-248. (doi:10.1007/978-1-84800-972-1_23).

Cheung, Julie, Scanlan, Jim and Wiseall, Steve (2009) Towards a framework for value-driven design in civil aerospace systems: a case study CIRP Journal of Manufacturing Science and Technology

Cheung, W.S., Park, Y. H. and Griffin, M.J. (2000) Comparison and analysis of standardised methods for predicting the hazards of whole-body vibration and repeated shocks Journal of the Korean Society for Noise and Vibration Engineering, 10, (1), pp. 160-167.

Chikatamarla, S.S., Ansumali, S. and Karlin, I.V. (2006) Entropic lattice Boltzmann models for hydrodynamics in three dimensions Physical Review Letters, 97, (1), 010201-[4pp]. (doi:10.1103/PhysRevLett.97.010201).

Chillingworth, D.R.J. (2010) Dynamics of an impact oscillator near a degenerate graze Nonlinearity, 23, pp. 2723-2748. (doi:10.1088/0951-7715/23/11/001).

Chippendale, R.D., Golosnoy, I.O. and Lewin, P. (2014) Numerical modelling of thermal decomposition processes and associated damage in carbon fibre composites Journal of Physics D: Applied Physics, 47, (38), pp. 1-16. (doi:10.1088/0022-3727/47/38/385301).

Choi, H.G., Thite, A.N. and Thompson, D.J. (2003) Comparison of ordinary cross validation and generalized cross validation for structure-borne sound source identification University of Southampton 82pp. , Southampton, GB (ISVR Technical Memorandum, 914).

Choi, H.G., Thite, A.N. and Thompson, D.J. (2003) Inverse force determination: refinements of matrix regularisation and sensor location selection methods University of Southampton 100pp. , Southampton, GB (ISVR Technical Memorandum, 924).

Choi, W.J., Xiong, Y.P. and Shenoi, R.A. (2010) Vibration characteristics of sandwich beams with steel skins and magnetorheological cores Advances in Structural Engineering, 13, (5), pp. 837-844. (doi:10.1260/1369-4332.13.5.837).

Chong, T.P. and Zhong, S. (2003) On the three-dimensional structure of turbulent spots In Proceedings of 2003 ASME Turbo Expo: Power for Land, Sea, and Air. American Society of Mechanical Engineers..

Chong, T.P. and Zhong, S. (2005) On the Three-Dimensional Structure of Turbulent Spots Journal of Turbomachinery, 127, (3), pp. 545-551. (doi:10.1115/1.1928286).

Chong, W. W. F., Teodorescu, M. and Vaughan, N.D. (2011) Cavitation induced starvation for piston-ring/liner tribological conjunction Tribology International, 44, (4), pp. 483-497. (doi:10.1016/j.triboint.2010.12.008).

Chong, W.W.F., Teodorescu, M. and Rahnejat, H. (2013) Nanoscale elastoplastic adhesion of wet asperities Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology (doi:10.1177/1350650112472142).

Choo, J.H., Spikes, H.A., Ratoi, M., Glovnea, R. and Forrest, A. (2006) Friction reduction in low-load hydrodynamic lubrication with a hydrophobic surface [in special issue: First International Conference on Advanced Tribology (iCAT 2004)] Tribology International, 40, (2), pp. 154-159. (doi:10.1016/j.triboint.2005.09.006).

Chou, F. and Holmes, R. (2000) The damping capacity of a squeeze film damper in suppressing vibration of a rotating assembly Tribology International, 33, (2), pp. 81-97. (doi:10.1016/S0301-679X(00)00030-X).

Christodoulou, Konstantinos, Ntotsios, Evaggelos, Papadimitriou, Costas and Panetsos, Panagiotis (2008) Structural model updating and prediction variability using Pareto optimal models [in special issue: Computational Methods in Optimization Considering Uncertainties] Computer Methods in Applied Mechanics and Engineering, 198, (1), pp. 138-149. (doi:10.1016/j.cma.2008.04.010).

Chu, F. and Holmes, R. (1998) The effect of squeeze film damper parameters on the unbalance response and stability of a flexible rotor Journal of Engineering for Gas Turbines and Power, 120, pp. 140-148.

Chu, Fulei and Holmes, Roy (1998) Efficient computation on nonlinear responses of a rotating assembly incorporating the squeeze-film damper Computer Methods in Applied Mechanics and Engineering, 164, (3-4), pp. 363-373. (doi:10.1016/S0045-7825(98)00097-8).

Ciavarella, M. and Barber, J.R. (2005) Stability of thermoelastic contact for a rectangular elastic block sliding against a rigid wall European Journal of Mechanics - A/Solids, 24, (3), pp. 371-376. (doi:10.1016/j.euromechsol.2004.10.008).

Ciavarella, M., Decuzzi, P. and Monno, G. (2000) Frictionally-excited thermoelastic contact of rough surfaces International Journal of Mechanical Sciences, 42, (7), pp. 1307-1325. (doi:10.1016/S0020-7403(99)00051-X).

Ciavarella, M. and Demelio, G. (2001) Elastic multiscale contact of rough surfaces: Archard's model revisited and comparisons with modern fractal models Journal of Applied Mechanics, 68, (3), pp. 496-498. (doi:10.1115/1.1352016).

Ciavarella, M., Hills, D.A. and Monno, G. (1998) The influence of rounded edges on indentation by a flat punch Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 212, (4), pp. 319-327. (doi:10.1243/0954406981521259).

Ciavarella, M. and Macina, G. (2003) New results for the fretting-induced stress concentration on Hertzian and flat rounded contacts International Journal of Mechanical Sciences, 45, (3), pp. 449-467. (doi:10.1016/S0020-7403(03)00061-4).

Ciavarella, Michele (1999) Indentation by nominally flat or conical indenters with rounded corners International Journal of Solids and Structures, 36, (27), pp. 4149-4181. (doi:10.1016/S0020-7683(98)00186-3).

Ciavarella, Michele and Decuzzi, Paolo (2001) The state of stress induced by the plane frictionless cylindrical contact. I. The case of elastic similarity International Journal of Solids and Structures, 38, (26-27), pp. 4507-4523. (doi:10.1016/S0020-7683(00)00289-4).

Ciavarella, Michele and Demelio, G. (1999) Numerical methods for the optimisation of specific sliding, stress concentration and fatigue life of gears International Journal of Fatigue, 21, (5), pp. 465-474. (doi:10.1016/S0142-1123(98)00089-9).

Clubley, S.K. (2013) Small steel sections subject to long duration blast At GEMS 2013: Group of Experts on Mitigation Systems, United Kingdom.

Colacino, F.M., Rustighi, E. and Mace, B.R. (2010) Subject-specific musculoskeletal parameters of wrist flexors and extensors estimated by an EMG-driven musculoskeletal model At 17th Congress of the European Society of Biomechanics (ESB2010 ), United Kingdom. 05 - 08 Jul 2010.

Coleman, R.B. and Richardson, R.N. (2005) A novel closed cycle cryosurgical system International Journal of Refrigeration, 28, (3), pp. 412-418. (doi:10.1016/j.ijrefrig.2004.07.021).

Collins, Richard Paul (1991) Serial digital multiplexing of transducer data for intrinsically safe applications University of Southampton, School of Electronics and Computer Science, Doctoral Thesis .

Commin, Lorelei, Dumont, M., Rotinat, R., Pierron, F., Masse, J.-E. and Barrallier, L. (2012) Influence of the microstructural changes and induced residual stresses on tensile properties of wrought magnesium alloy friction stir welds Materials Science and Engineering: A, 551, pp. 288-292. (doi:10.1016/j.msea.2012.05.021).

Cook, Richard B., Bolland, Benjamin J.R.F., Wharton, Julian A., Tilley, Simon, Latham, Jeremy L. and Wood, Robert J.K. (2013) Pseudotumour formation due to tribocorrosion at the taper interface of large diameter metal on polymer modular total hip replacements The Journal of Arthroplasty, 28, (8), pp. 1430-1436. (doi:10.1016/j.arth.2013.02.009). (PMID:23528556).

Corrochano, J., Walker, J.C., Lieblich, M., Ibanez, J. and Rainforth, W.M. (2011) Dry sliding wear behaviour of powder metallurgy Al-Mg-Si alloy-MoSi2 composites and the relationship with the microstructure Wear, 270, (9-10), pp. 658-665. (doi:10.1016/j.wear.2011.01.029).

Cossalter, V., Lot, R. and Massaro, M. (2010) Discussion on: "Experimental identification of the engine-to-slip dynamics for traction control applications in a sport motorcycle" European Journal of Control, 16, (1), pp. 113-114. (doi:10.1016/S0947-3580(10)70628-2).

Cossalter, V., Lot, R. and Massaro, M. (2010) An advanced multibody code for handling and stability analysis of motorcycles Meccanica, 46, (5), pp. 943-958. (doi:10.1007/s11012-010-9351-7).

Cotton, J., Grant, J.W., Jensen, M.K. and Love, B.J. (2001) Analytical solutions to the shear strength of interfaces failing under flexure loading conditions International Journal of Adhesion and Adhesives, 21, (1), pp. 65-70. (doi:10.1016/S0143-7496(00)00031-2).

Coultrup, Oliver J., Browne, Martin, Hunt, Christopher and Taylor, Mark (1970) Computational evaluation of the effects of internal defects on fatigue damage accumulation in bone cement At 54th Annual Meeting of the Orthopaedic Research Society. 02 - 05 Mar 2008. 1 pp, p. 1852.

Cox, Brian N., Spearing, S. Mark and Mumm, Daniel R, (2008) Practical challenges in formulating virtual tests for structural composites Camanho, Pedro P., Dávila, Carlos G., Pinho, Silvestre T. and Remmers, Joris J. C. (eds.) In Mechanical Response of Composites. Springer., pp. 57-75. (doi:10.1007/978-1-4020-8584-0_3).

Crammond, G., Boyd, S.W. and Dulieu-Barton, J.M. (2011) Speckle pattern characterisation for high resolution digital image correlation Applied Mechanics and Materials, 70, pp. 261-266. (doi:10.4028/www.scientific.net/AMM.70.261).

Cross, Kevin J., McBride, John W. and Lifton, Joseph J. (2014) The uncertainty of radius estimation in least-squares sphere-fitting, with an introduction to a new summation based method Precision Engineering, 38, (3), 499 - 505. (doi:10.1016/j.precisioneng.2014.01.004).

Crump, D.A. and Dulieu-Barton, J.M. (2008) Full Field Strain Analysis of Aircraft Sandwich Structures At XIth SEM International Congress and Exposition, United States. 02 Jun 2008 - 06 Jun 2010 . 10 pp.

Crump, D.A. and Dulieu-Barton, J.M. (2010) Performance assessment of aerospace sandwich secondary structure panels using thermoelastic stress analysis Plastics, Rubber and Composites, 39, (3-5), pp. 137-147. (doi:10.1179/174328910X12647080902691).

Crump, D.A. and Dulieu-Barton, J.M. (2012) Assessment of non-adiabatic behaviour in thermoelastic stress analysis of composite sandwich panels Experimental Mechanics, 52, pp. 829-842. (doi:10.1007/s11340-012-9601-9).

Crump, D.A., Dulieu-Barton, J.M. and Longana, M.L. (2011) Approaches to synchronise conventional measurements with optical techniques at high strain rates Applied Mechanics and Materials, 70, pp. 75-80. (doi:10.4028/www.scientific.net/AMM.70.75).

Crump, D.A., Dulieu-Barton, J.M. and Savage, J. (2007) Manufacturing options for secondary aircraft CFRP sandwich components At Sixteenth International Conference on Composite Materials (ICCM 16), Japan. 08 - 13 Jul 2007. 8 pp.

Crump, D.A., Dulieu-Barton, J.M. and Savage, J. (2009) Full-scale performance assessment of aircraft secondary sandwich structure using thermoelastic stress analysis At 17th International Conference on Composite Materials (ICCM 17). 27 - 31 Jul 2007. 10 pp.

Crump, D.A., Dulieu-Barton, J.M. and Savage, J. (2010) Design and commission of an experimental test rig to apply a full-scale pressure load on composite sandwich panels representative of aircraft secondary structure Measurement Science and Technology, 21, (1), 015108-[16pp]. (doi:10.1088/0957-0233/21/1/015108).

Crump, Duncan A., Dulieu-Barton, Janice M. and Savage, John (2008) Analysis of full-scale aerospace sandwich panels under pressure loading At 8th International Conference on Sandwich Structures. 06 - 08 May 2008. 12 pp, pp. 582-593.

Crump, Duncan A., Dulieu-Barton, Janice M. and Savage, John (2010) The manufacturing procedure for aerospace secondary sandwich structure panels Journal of Sandwich Structures and Materials, 12, pp. 421-427. (doi:10.1177/1099636209104531).

Crump, Jennifer, Qiao, Xiao Guang and Starink, Marco J. (2011) The effect of high-pressure torsion on the behaviour of intermetallic particles present in Al–1Mg and Al–3Mg Journal of Materials Science, 47, (4), pp. 1751-1757. (doi:10.1007/s10853-011-5955-0).

Dan, A.H., Willoughby, A.F.W., Bonar, J.M. and McGregor, B.M. (2001) Diffusion studies of antimony and boron in Si and SiGe under point defect injections by Rapid Thermal Anneal At Proceedings of the Seventh Postgraduate Conference in Engineering Materials. 01 Jan 2000. 2 pp, pp. 17-18.

Davies, P.O.A.L., Holland, K.R. and Van der Walt, D.C. (2002) The experimental assessment of flow-generated noise emissions from intake and exhaust systems At European Conference on Vehicle Noise and Vibration, IMechE Headquarters. 11 - 12 Jun 2002. , pp. 193-203.

Dawood, T.A., Shenoi, R.A. and Sahin, M. (2007) A procedure to embed fibre Bragg Grating strain sensors into GFRP sandwich structures Composites Part A: Applied Science and Manufacturing, 38, pp. 217-226.

De Alba, R.O., Ferguson, N.S. and Mace, B.R. (2014) A robust spot weld model for structural vibration analysis Finite Elements in Analysis and Design, 89, pp. 1-7. (doi:10.1016/j.finel.2014.04.010).

Decuzzi, P., Ciavarella, M. and Monno, G. (2001) Frictionally excited thermoelastic instability in multi-disk clutches and brakes Journal of Tribology: Transactions of the ASME, 123, (4), pp. 865-871. (doi:10.1115/1.1352740).

Deiterding, Ralf, Cirak, Fehmi, Mauch, Sean P. and Meiron, Daniel I. (2007) A virtual test facility for simulating detonation- and shock-induced deformation and fracture of thin flexible shells International Journal for Multiscale Computational Engineering, 5, (1), pp. 47-63. (doi:10.1615/IntJMultCompEng.v5.i1.60).

Deiterding, Ralf, Radovitzky, Raul, Mauch, Sean P., Noels, Ludovic, Cummings, Julian C. and Meiron, Daniel I. (2006) A virtual test facility for the efficient simulation of solid materials under high energy shock-wave loading Engineering With Computers, 22, (3), pp. 325-347. (doi:10.1007/s00366-006-0043-9).

Della, C.N. and Shu, D. (2007) Effects of polarization orientation on the performance of 1-3 piezoelectric composites At International Conference on Materials for Advanced Technologies 2007 (ICMAT 2007). 01 - 06 Jul 2007. 11 pp.

Della, Christian N. and Shu, Dongwei (2005) Vibration of beams with double delaminations Journal of Sound and Vibration, 282, (3-5), pp. 919-935. (doi:10.1016/j.jsv.2004.03.052).

Della, Christian N. and Shu, Dongwei (2005) Free vibration analysis of composite beams with overlapping delaminations European Journal of Mechanics - A/Solids, 24, (3), pp. 491-503. (doi:10.1016/j.euromechsol.2005.01.007).

Della, Christian N. and Shu, Dongwei (2006) Vibration of beams with embedded piezoelectric sensors and actuators Smart Materials and Structures, 15, (2), pp. 529-537. (doi:10.1088/0964-1726/15/2/036).

Della, Christian N. and Shu, Dongwei (2006) Vibration of delaminated multilayer beams Composites Part B: Engineering, 37, (2-3), pp. 227-236. (doi:10.1016/j.compositesb.2005.05.006).

Della, Christian N. and Shu, Dongwei (2007) Vibration of beams with two overlapping delaminations in prebuckled states Composites Part B: Engineering, 38, (2), pp. 109-118. (doi:10.1016/j.compositesb.2006.08.001).

Della, Christian N. and Shu, Dongwei (2007) Free vibration analysis of delaminated bimaterial beams Composite Structures, 80, (2), pp. 212-220. (doi:10.1016/j.compstruct.2006.05.005).

Della, Christian N. and Shu, Dongwei (2007) On the performance of 1–3 piezoelectric composites with a passive and active matrix Sensors and Actuators A: Physical, 140, (2), pp. 200-2006. (doi:10.1016/j.sna.2007.06.031).

Della, Christian N. and Shu, Dongwei, (2008) Mechanical properties of carbon nanotubes reinforced ultra high molecular weight polyethylene Lau, William, Min, Shang Huai, Sua, Lee Nam, Jan, Ma and Tok, Alfred (eds.) In Advanced Structural and Functional Materials for Protection. Trans Tech., pp. 45-50.

Della, Christian N. and Shu, Dongwei (2008) Free vibration analysis of multiple delaminated beams under axial compressive load Journal of Reinforced Plastics & Composites

Della, Christian N. and Shu, Dongwei (2008) The performance of 1-3 piezoelectric composites with a porous non-piezoelectric matrix Acta Materialia, 56, (4), pp. 754-761. (doi:10.1016/j.actamat.2007.10.022).

Della, Christian N., Shu, Dongwei and MSRao, Parlapalli (2004) Vibrations of beams with two overlapping delaminations. (In: Twelfth International Conference on Composite Structures) Composite Structures, 66, (1-4), pp. 101-108. (doi:10.1016/j.compstruct.2004.04.027).

Della, Christian N., Shu, Dongwei and Zhao, Yapu (2005) Vibration of composite beams with two overlapping delaminations Acta Mechanica Siniga, 21, (1), pp. 47-55. (doi:10.1007/s10409-004-0006-6).

Delorme, Y., Kameswara Rao, A., Kerlo, A.E., Shetty, D., Rodefeld, M., Chen, J. and Frankel, S. (2012) Large eddy simulation of powered Fontan hemodynamics [in special issue: Biofluid Mechanics] Journal of Biomechanics, 46, (2), pp. 408-422. (doi:10.1016/j.jbiomech.2012.10.045).

Denchfield, S., Winden, B., Brooks, Christopher James, Turnock, S.R., Hudson, D.A., Forrester, Alexander I.J. and Taunton, D.J. (2011) Wireless sensor network for determining boat motions and hydroelastic responses At Second International Conference on Advanced Model Measurement Technology for EU Maritime Industry (AMT' 11), United Kingdom. 14 pp.

Deng, Jun and Lee, Marcus M.K. (2007) Effect of plate end and adhesive spew geometries on stresses in retrofitted beams bonded with a CFRP plate Composites Part B: Engineering, 39, (4), pp. 731-739. (doi:10.1016/j.compositesb.2007.05.004).

Dhillon, Amritpaul, Schneider, Philipp, Kuhn, Gisela, Reinwald, Yvonne, White, Lincoln J., Levchuk, Alina, Rose, Felicity R.A.J., Müller, Ralph, Shakesheff, Kevin M. and Rahman, Cheryl V. (2011) Analysis of sintered polymer scaffolds using concomitant synchrotron computed tomography and in situ mechanical testing Journal of Materials Science Materials in Medicine, 22, (12), pp. 2599-2605. (doi:10.1007/s10856-011-4443-z).

Di Lizia, P., Armellin, R., Bernelli-Zazzera, F. and Berz, M. (2014) High order optimal control of space trajectories with uncertain boundary conditions Acta Astronautica, 93, pp. 217-229. (doi:10.1016/j.actaastro.2013.07.007).

Di Lizia, P., Armellin, R., Morselli, A. and Bernelli-Zazzera, F. (2014) High order optimal feedback control of space trajectories with bounded control Acta Astronautica, 94, (1), pp. 383-394. (doi:10.1016/j.actaastro.2013.02.011).

Di Martino, I., Brooks, J.W., Reed, P.A.S., Holdway, P. and Wisbey, A. (2007) Adaptive numerical modelling of high temperature strength, creep and fatigue behaviour in Ni-based superalloys. [In special issue: High temperature fatigue - influences of environment and creep] Materials Science and Technology, 23, (12), pp. 1402-1407. (doi:10.1179/174328407X244013).

Di Martino, I., Brooks, J.W., Reed, P.A.S., Holdway, P. and Wisbey, A. (2007) Adaptive numerical modelling of high temperature strength, creep and fatigue behaviour in Ni-based superalloys. [In special issue: High temperature fatigue - influences of environment and creep] Materials Science and Technology, 23, (12), pp. 1402-1407. (doi:10.1179/174328407X244013).

Di Monaco, Francesco, Ghandchi Tehrani, Maryam, Elliott, S.J., Bonisoli, Elvio and Tornincasa, Stefano (2013) Energy harvesting using semi-active control Journal of Sound and Vibration (doi:10.1016/j.jsv.2013.06.005).

Dickinson, A.S. (2013) Activity and Loading Influence the Predicted Bone Remodeling around Cemented Hip Replacements Journal of Biomechanical Engineering, 136, (4) (doi:10.1115/1.4026256).

Dickinson, A.S. (2015) Activity intensity, assistive devices and joint replacement influence predicted remodelling in the proximal femur Biomechanics and Modeling in Mechanobiology, 15, (1), pp. 181-194. (doi:10.1007/s10237-015-0678-9).

Dickinson, A.S., Browne, M., Roques, A.C. and Taylor, A.C. (2013) A fatigue assessment technique for modular and pre-stressed orthopaedic implants Medical Engineering & Physics, 36, (1), pp. 72-80. (doi:10.1016/j.medengphy.2013.09.009).

Dickinson, A.S., Browne, M., Wilson, K.C., Jeffers, J.R.T. and Taylor, A.C. (2011) Pre-clinical evaluation of ceramic femoral head resurfacing prostheses using computational models and mechanical testing Proceedings of the Institution of Mechanical Engineers Part H: Journal of Engineering in Medicine, 225, (9), pp. 866-876. (doi:10.1177/0954411911411605). (PMID:22070024).

Dickinson, Alexander, Taylor, Andrew and Browne, M. (2012) Impact loads and stresses in hip resurfacing The Journal of Bone and Joint Surgery, 94-B, supplement SUPP XL 49 (PMID:20570106).

Dickinson, Alexander, Taylor, Andrew, Jeffers, Jonathan and Browne, Martin (2010) Performance of the resurfaced hip. Part 2: the influence of prosthesis stem design on remodelling and fracture of the femoral neck Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 224, pp. 841-851. (doi:10.1243/09544119JEIM680). (PMID:20839652).

Dickinson, Alexander, Taylor, Andrew, Roques, Anne and Browne, Martin (2013) Measuring the adhesion of Ti/HA coatings to non-metallic implant materials [in special issue: International Society for Technology in Arthroplasty (ISTA) Palm Beach, Florida, USA, 16–19 October 2013] Orthopaedic Proceedings, 95-B, supplement 34, p. 286.

Dickinson, Alexander, Taylor, Andrew C. and Browne, Martin (2010) Performance of the resurfaced hip. Part 1: the influence of the prosthesis size and positioning on the remodelling and fracture of the femoral neck Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 224, (3), pp. 427-439. (doi:10.1243/09544119JEIM679). (PMID:20408488).

Dietrich, J., Becker, F., Nittka, T., Wabbels, M., Modoran, D., Kast, G., Williams, I.D., Curran, A., den Boer, E., Kopacek, B., Schadlbauer, S. and Musterle, J., Aionesei, C.(ed.) (2014) Extending product lifetimes: a reuse network for ICT hardware Proceedings of the ICE - Waste and Resource Management, 167, (WR3), pp. 123-135. (doi:10.1680/warm.13.00024).

Dixon, J.D., Baker, J.M. and Challen, B. (2000) A hybrid method for modelling engine noise In European Conference on Vehicle Noise and Vibration, Institution of Mechanical Engineers Headquarters, London, UK, 10-12 May 2000. IMechE, Professional Engineering Publishing., pp. 107-123.

Doerffel, Dennis and Abu-Sharkh, Suleiman (1970) System modeling and simulation as a tool for developing a vision for future hybrid electric vehicle drivetrain configurations At 2006 IEEE Vehicle Power and Propulsion Conference (VPPC). 06 - 08 Sep 2006. 22 pp.

Doherty, D., Mace, B.R., Ferguson, N.S. and Rustighi, E., (2008) An adaptive anechoic termination for active vibration control Brennan, M.J. (ed.) At Eurodyn 2008 - 7th European Conference on Structural Dynamics, United Kingdom. 07 - 09 Jul 2008.

Donaldson, Finn, Ruffoni, Davide, Schneider, Philipp, Levchuk, Alina, Zwahlen, Alexander, Pankaj, Pankaj and Müller, Ralph (2014) Modeling microdamage behavior of cortical bone Biomechanics and Modeling in Mechanobiology, 13, (6), pp. 1227-1242. (doi:10.1007/s10237-014-0568-6). (PMID:24622917).

Dong, Wang, Wang, Gongxian, Xiong, Yeping and Zhe, Li (2013) Nonlinear dynamics seismic response of container crane based on contact friction theory At The Ninth International Conference on Vibration Engineering and Technology of Machinery VETOMAC-IX 2013, China. 20 - 23 Aug 2013.

Dopico-Gonzalez, C., New, A.M.R. and Browne, M. (1970) Probabilistic analysis of an uncemented total hip replacement At European Society of Biomechanics Workshop 2007: Finite Element Modelling in Biomechanics and Mechanobiology. 26 - 28 Aug 2007.

Down, Michael, Jiang, liudi and McBride, John (2015) Investigating the benefits of a compliant gold coated multi-walled carbon nanotube contact surface in micro-electro mechanical systems switching Applied Physics Letters, 107, (7), 071901-1-071901-5. (doi:10.1063/1.4928765).

Dressler, M.R., Ross, M.A., Schlacter, A.J., Strickland, A.M., Taylor, M. and Ernsberger, C. (2010) Predicting UHMWPE wear: decreasing wear rate following a change in sliding direction At 56th Annual Meeting of the Orthopaedic Research Society, United States. 06 - 09 Mar 2010.

Dubas, Aleksander (2014) Robust automated computational fluid dynamics analysis and design optimisation of rim driven thrusters University of Southampton, Engineering and the Environment, Doctoral Thesis , 265pp.

Dulieu-Barton, J., Gheradi, A., Boyd, S. and Thomsen, O.T. (2007) Experimental analysis of stresses in bonded, pultruded composite structures At Novel Applications of Surface Modification (NASM 2007). 18 - 20 Sep 2007. 1 pp.

Dulieu-Barton, J.M. (2008) Editorial The Journal of Strain Analysis for Engineering Design, 43, (6), i-iii.

Dulieu-Barton, J.M. (2008) Full-field experimental stress/strain analysis of sandwich structures In, Torres Marques, A. (eds.) Advanced School on Sandwich Structures. Advanced School on Sandwich Structures (ASSS 08) Porto, Portugal, University of Porto pp. 1-25.

Dulieu-Barton, J.M. (2009) Thermoelastic stress analysis of composite materials and structures At Symposium on Recent Advances in Mechanics. 17 - 19 Sep 2009. 2 pp, pp. 27-28.

Dulieu-Barton, J.M. (2009) 7th international conference on modern practice in stress and vibration analysis, Bristol, UK, Institute of Physics Publishing (Journal of Physics: Conference Series, 181).

Dulieu-Barton, J.M., Berggreen, C. and Boyenval Langlois, C., (2010) Estimation of fracture parameters in foam core materials using thermal techniques Ravichandran, G. (ed.) In Proceedings of the 9th International Conference on Sandwich Structures (ICSS-9). California Institute of Technology. 10 pp.

Dulieu-Barton, J.M., Berggreen, C. and Mettemberg, C. (2009) Assessment of foam fracture in sandwich beams using thermoelastic stress analysis At 17th International Conference on Composite Materials (ICCM17). 27 - 31 Jul 2009. 10 pp.

Dulieu-Barton, J.M., Boyenval Langlois, C., Thomsen, O.T., Zhang, S. and Fruehmann, R.K. (2010) Derivation of temperature dependent material properties of polymer foam core materials using optical extensometry [in special issue: ICEM 14 – 14th International Conference on Experimental Mechanics] EPJ Web of Conferences, 6, 38004-[8pp]. (doi:10.1051/epjconf/20100638004).

Dulieu-Barton, J.M., Crump, D.A. and Griffith, D., (2010) Effect of core crush on honeycomb sandwich panels Ravichandran, G. (ed.) In Proceedings of the 9th International Conference on Sandwich Structures (ICSS-9). California Institute of Technology. 10 pp.

Dulieu-Barton, J.M., Earl, J.S. and Shenoi, R.A. (2001) Determination of the stress distribution in foam-cored sandwich construction tee joints The Journal of Strain Analysis for Engineering Design, 36, (6), pp. 545-560. (doi:10.1243/0309324011514700).

Dulieu-Barton, J.M. and Emery, T.R. (2008) Prediction of fatigue life in composite materials using thermoelastic stress analysis At 17th European Congress on Fracture (ECF17). 02 - 05 Sep 2008. 8 pp.

Dulieu-Barton, J.M., Emery, T.R., Quinn, S. and Cunningham, P.R. (2006) A temperature correction methodology for quantitative thermoelastic stress analysis and damage assessment Measurement Science and Technology, 17, (6), pp. 1627-1637. (doi:10.1088/0957-0233/17/6/047).

Dulieu-Barton, J.M., Quinn, S and Ye, C.C. (2009) Optical fibre Bragg grating strain sensors In, Eaton Evans, J., Dulieu-Barton, J.M. and Burguete, R.L. (eds.) Modern Stress and Strain Analysis: a State of the Art Guide to Measurement Techniques. London, GB, Findlay Media pp. 2-3.

Dulieu-Barton, J.M., Sahin, M., Lennard, F.J., Eastop, D.D. and Chambers, A.R. (2007) Assessing the feasibility of monitoring the condition of historic tapestries using engineering techniques Key Engineering Materials, 347, pp. 187-192.

Dulieu-Barton, J.M., Shenoi, R.A., Quinn, S., Blake, J.I.R. and Boyd, S.W. (1970) US Office of Naval Research, Solid Mechanics Program Review At Office of Naval Research, Solid Mechanics Program Review. 01 Sep 2008. , pp. 20-31.

Dulieu-Barton, J.M. and Stanley, P. (2005) Photoelastic stress analysis of a leaf-spring eyelet Strain, 41, (4), pp. 163-166. (doi:10.1111/j.1475-1305.2005.00232.x).

Dulieu-Barton, J.M., Stanley, P. and Phan, T.S. (2007) An experimental approach to stress separation in thermoelastic stress analysis At Photomechanics 2006. 10 - 12 Jul 2006.

Dulieu-Barton, J.M. and Worden, K. (2003) Genetic identification of crack-tip parameters using thermoelastic isopachics Measurement Science and Technology, 14, (2), pp. 176-183. (doi:10.1088/0957-0233/14/2/304).

Dulieu-Barton, J.M., Ye, C.C., Chambers, A.R., Lennard, F.J. and Eastop, D.D. (2008) Optical fibre sensors for monitoring damage in historic tapestries At SEM XI International Congress on Experimental and Applied Mechanics. 02 - 05 Jun 2008. 8 pp.

Dulieu-Barton, Janice (2008) Editorial Strain, 44, (4), pp. 283-284. (doi:10.1111/j.1475-1305.2008.00539.x).

Dunsmore, W., Pitts, G., Please, C.P., Lewis, S.M. and Sexton, C.J. (1996) Investigating design improvements of an hydraulic pump through planned experiments At Advances in Industrial Engineering Applications and Practice I: Proceedings of the 1st Annual International Conference on Industrial Engineering Applications. 01 Jan 1996. , pp. 830-835.

Durai Prabhakaran, R.T., Pillai, S., Charca, S., Oshkovr, S.A., Knudsen, H., Andersen, T.L., Bech, J.K., Thomsen, O.T. and Lilholt, H. (2013) Effect of polymer form and its consolidation on mechanical properties and quality of glass/PBT composites Applied Composite Materials, 21, (2), pp. 301-324. (doi:10.1007/s10443-013-9340-9).

Durai Prabhakaran, R.T., Pillai, S., Charca, S., Oshkovr, S.A., Knudsen, H., Andersen, T.L., Ilsted Bech, J., Thomsen, O.T. and Lilholt, H. (2014) Mechanical characterization and fractography of glass fiber/polyamide (PA6) composites Polymer Composites, 36, (5), pp. 834-853. (doi:10.1002/pc.23003).

Eastwood, Paul Graham (1989) Diesel engine condition monitoring: laser-based diagnostic techniques University of Southampton, Institute of Sound and Vibration Research, Doctoral Thesis , 342pp.

Eaton Evans, J., Crump, D.A. and Dulieu-Barton, J.M. (2009) Thermoelastic stress analysis In, Eaton Evans, J., Dulieu-Barton, J.M. and Burguete, R.L. (eds.) Modern Stress and Strain Analysis: a State of the Art Guide to Measurement Techniques. London, UK, Findlay Media pp. 18-19.

Eaton-Evans, J., Dulieu-Barton, J.M., Little, E and Brown, I.A. (2006) Experimental studies of NiTi self-expanding stent designs” Journal of ASTM International, 3, (9), JAI100388 [12pp]. (doi:10.1520/JAI100388).

Eaton-Evans, J., Dulieu-Barton, J.M., Little, E. and Brown, I. (2005) Thermoelastic stress analysis of Nitinol self-expanding stents Applied Mechanics and Materials, 3-4, pp. 47-52.

Eaton-Evans, J., Dulieu-Barton, J.M., Little, E. and Brown, I. (2006) Thermoelastic studies on Nitinol stents The Journal of Strain Analysis for Engineering Design, 41, (7), pp. 481-495. (doi:10.1243/03093247JSA195).

Eaton-Evans, J., Dulieu-Barton, J.M., Little, E. and Brown, I. (2006) Thermoelastic analysis of high pressure angioplasty balloons Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 220, (3), pp. 425-438. (doi:10.1243/09544119H00805).

Edeson, R.L., Aglietti, G.S. and Tatnall, A.R.L. (2012) Dimensional stability of materials subject to random vibration Precision Engineering, 37, (2), pp. 323-335. (doi:10.1016/j.precisioneng.2012.10.001).

El-Khatib, H.M., Mace, B.R. and Brennan, M.J. (2003) The effects of a nearfield on the performance of tunable vibration absorbers on a beam At 8th International Conference on Recent Advances in Structural Dynamics. 14 - 16 Jul 2003.

El-hami, M., Glynne-Jones, P., White, N.M., Beeby, S., James, E., Brown, A.D. and Hill, M (2001) Design and fabrication of a new vibration-based electromechanical generator [in special issue: Selected Papers for Eurosensors XIV] Sensors and Actuators A: Physical, 92, (1-3), pp. 335-342. (doi:10.1016/S0924-4247(01)00569-6).

Elliott, N.R, Ghandchi Tehrani, Maryam and Mottershead, John (2010) Partial pole placement of structures using measured receptance At 10th International Conference on Recent Advances in Structural Dynamics RASD 2010, United Kingdom. 12 - 14 Jul 2010.

Elliott, S.J. (2008) A review of active noise and vibration control in road vehicles University of Southampton , Southampton, UK (ISVR Technical Memorandum, 981).

Elliott, S.J., Benassi, L., Brennan, M.J., Gardonio, P. and Huang, X. (2004) Mobility analysis of active isolation systems Journal of Sound and Vibration, 271, (1-2), pp. 297-321. (doi:10.1016/S0022-460X(03)00770-3).

Elliott, Steve (2004) Automatic control of sound and vibration At The 2004 UKACC Lecture: Automatic Control of Sound and Vibration. 18 Mar 2004.

Emery, T.R. and Dulieu-Barton, J.M. (2007) Damage monitoring of composite materials using pulsed phase thermography and thermoelastic stress analysis Key Engineering Materials, 347, pp. 621-626.

Emery, T.R. and Dulieu-Barton, J.M. (2010) Thermoelastic stress analysis of damage mechanisms in composite materials Composites Part A: Applied Science and Manufacturing, 41, pp. 1729-1742. (doi:10.1016/j.compositesa.2009.08.015).

Emery, T.R., Dulieu-Barton, J.M. and Cunningham, P.R. (2009) Sub-surface damage location and identification using infra-red techniques At 17th International Conference on Composite Materials (ICCM17). 27 - 31 Jul 2009. 10 pp.

Emery, T.R., Dulieu-Barton, J.M., Earl, J. S. and Cunningham, P.R. (2007) A generalised approach to the calibration of orthotropic materials for thermoelastic stress analysis Composites Science and Technology, 68, (3-4), pp. 743-752. (doi:10.1016/j.compscitech.2007.09.002).

Eres, M.H., Schwartz, L.W. and Roy, R.V. (2000) Fingering phenomena for driven coating films Physics of Fluids, 12, (6), pp. 1278-1295. (doi:10.1063/1.870382).

Eres, Murat Hakki (1998) Three-dimensional direct numerical simulation of coating flows University of Delaware, Department of Mechanical Engineering, Doctoral Thesis , 286pp.

Eriksen, R., Berggreen, C., Boyd, S.W. and Dulieu-Barton, J.M. (2010) Towards high velocity deformation characterisation of metals and composites using Digital Image Correlation EPJ Web of Conferences, 6, 38016-[8pp]. (doi:10.1051/epjconf/20100631013).

Escudeiro, A, Polcar, T. and Cavaleiro, A (2013) a-C(:H) and a-C(:H)_Zr coatings deposited on biomedical Ti-based substrates: Tribological properties [in special issue: Carbon- or Nitrogen- Containing Nanostructured Thin Films] Thin Solid Films, 538, pp. 89-96. (doi:10.1016/j.tsf.2012.12.086).

Escudeiro, A, Polcar, T. and Cavaleiro, A (2014) Adsorption of bovine serum albumin on Zr co-sputtered a-C(:H) films: implication on wear behaviour Journal of the Mechanical Behavior of Biomedical Materials, 39, pp. 316-327. (doi:10.1016/j.jmbbm.2014.08.001). (PMID:25171748).

Evans, M.-H. (2013) White structure flaking failure in bearings under rolling contact fatigue University of Southampton, Faculty of Engineering and the Environment, Doctoral Thesis , 233pp.

Evans, Martin -H., Richardson, Alex D., Wang, Ling and Wood, R.J.K. (2014) Investigations of white etching crack (WEC) formation under rolling contact fatigue Tribology & Lubrication Technology, 70, (1), pp. 1-80.

Evans, Martin-Halfdan, Richardson, A.D., Wang, L. and Wood, R.J.K. (2013) Serial sectioning investigation of butterfly and white etching crack (WEC) formation in wind turbine gearbox bearings Wear, 302, (1-2), pp. 1573-1582. (doi:10.1016/j.wear.2012.12.031).

Evans, Martin-Halfdan, Walker, J.C., Ma, Chao, Wang, L. and Wood, R.J.K. (2013) A FIB/TEM study of butterfly crack formation and white etching area (WEA) microstructural changes under rolling contact fatigue in 100Cr6 bearing steel Materials Science and Engineering: A, 570, pp. 127-134. (doi:10.1016/j.msea.2013.02.004).

Evaristo, M., Polcar, T. and Cavaleiro, A. (2014) Tribological behaviour of W-alloyed carbon-based coatings in dry and lubricated sliding contact Lubrication Science, 26, (6), pp. 428-439. (doi:10.1002/ls.1259).

Everitt, S., Pang, H.T., Hide, N.J., Starink, M.J. and Reed, P.A.S. (2006) A comparison of high temperature fatigue crack propagation in sub-solvus heat treated turbine disc alloys At High Temperature Fatigue: Influences of Creep and Environment. 05 - 06 Dec 2006. , pp. 61-62.

Everitt, S., Starink, M.J., Pang, H.T., Wilcock, I.M., Henderson, M.B. and Reed, P.A.S. (2007) A comparison of high temperature fatigue crack propagation in various sub-solvus heat treated turbine disc alloys Materials Science and Technology, 23, pp. 1419-1423. (doi:10.1179/174328407X213189).

Everitt, Stewart, Jiang, Rong, Gao, Nong, Starink, Marco J., Brooks, Jeffery and Reed, Philippa A.S. (2013) Comparison of fatigue crack propagation behaviour in two gas turbine disc alloys under creep–fatigue conditions: evaluating microstructure, environment and temperature effects Materials Science and Technology, 29, (7), pp. 781-787. (doi:10.1179/1743284713Y.0000000229).

Ewida, Kamal Tolba (1982) A rheovibro study on the effect of an oil film on mechanical impacts University of Southampton, Institute of Sound and Vibration Research, Doctoral Thesis , 275pp.

Fangohr, H. (2002) Computational modelling of the vortex state in high-temperature superconductors University of Southampton, School of Engineering Sciences, Doctoral Thesis .

Farrar, C.R., Worden, K. and Dulieu-Barton, J.M. (2009) Principles of structural degradation monitoring In, Boller, Christian, Chang, Fou-Kuo and Fujino, Yozo (eds.) Encyclopaedia of Structural Health Monitoring. UK, John Wiley and Sons

Fazi, Filippo Maria, Shin, Mincheol, Olivieri, Ferdinando, Fontana, Simone and Yue, Lang (2014) Comparison of pressure-matching and mode-matching beamforming methods for circular loudspeaker arrays At 137th AES Convention, United States. 09 - 12 Oct 2014.

Feng, Aichun (2014) Numerical simulation of nonlinear wave-body problem based on desingularized Rankine source and mixed Euler-Lagrange method University of Southampton, Engineering and the Environment, Doctoral Thesis , 210pp.

Feng, F., Zhou, Y., Yun, H., Rocha, A., Polcar, T., Cvrcek, L. and Liang, H. (2011) Potential application of a Ti-C:H coating in implants [in special issue: BIO 2011] Journal of the American Ceramic Society, 95, (9), pp. 2741-2745. (doi:10.1111/j.1551-2916.2011.05000.x).

Feraday, S.A., Shin, K., Harris, C., Brennan, M.J., Treyde, T. and Arthur, V. (2000) Adaptive spline modelling of braking systems' propensity to squeal In Proceedings of European Conference on Vehicle Noise and Vibration 2000, London. Instutition of Mechanical Engineers., pp. 187-196.

Ferguson, N.S. (2000) The Lagrange multiplier method revisited for free and forced vibration of a constrained structure In Structural dynamics ; recent advances, Vol. 1 (Proceedings of the 7th International Conference on Recent Advances in Structural Dynamics, Southampton). University of Southampton., pp. 309-324.

Fernandes, F., Loureiro, A., Polcar, T. and Cavaleiro, A (2015) Effect of the substrate dilution on the room and high temperature tribological behaviour of Ni-based coatings deposited by PTA on grey cast iron Surface and Coatings Technology, 281, pp. 11-19. (doi:10.1016/j.surfcoat.2015.09.034).

Fernandes, F., Polcar, T. and Cavaleiro, A. (2014) Tribological properties of self-lubricating TiSiVN coatings at room temperature Surface and Coatings Technology, 267, pp. 8-14. (doi:10.1016/j.surfcoat.2014.10.016).

Fernandes, F., Polcar, T., Loureiro, A. and Cavaleiro, A. (2015) Effect of the substrate dilution on the room and high temperature tribological behaviour of Ni-based coatings deposited by PTA on grey cast iron Surface and Coatings Technology, 281, pp. 11-19. (doi:10.1016/j.surfcoat.2015.09.034).

Fernandez, I.R., Fangohr, H. and Bhaskar, A. (2006) Normal modes of carbon nanotubes: similarities and differences with their continuum counterpart Journal of Physics: Conference Series, (26), pp. 131-134. (doi:10.1088/1742-6596/26/1/031).

Fernandez Comesana, Daniel, Fernandez Grande, Efren, Tiana Roig, Elisabet and Holland, Keith R. (2013) A novel deconvolution beamforming algorithm for virtual phased arrays At Internoise 2013, Austria. 15 - 18 Sep 2013.

Fernandez Comesana, Daniel, Tijs, Emiel, Cats, Peter and Cook, Douglas (2013) Visualization of acoustic intensity vector fields using scanning measurement techniques At Internoise 2013, Austria. 15 - 18 Sep 2013.

Fessler, Gregor, Zimmermann, Iwan, Glatzel, Thilo, Gnecco, Enrico, Steiner, Pascal, Roth, Raphael, Keene, Tony D., Liu, Shi-Xia, Decurtins, Silvio and Meyer, Ernst (2011) Orientation dependent molecular friction on organic layer compound crystals Applied Physics Letters, 98, (8), 083119-[3pp]. (doi:10.1063/1.3559227).

Finnveden, S. and Pinnington, R.J. (2000) A velocity method for estimating dynamic strain and stress in pipes Journal of Sound and Vibration, 229, (1), pp. 147-82. (doi:10.1006/jsvi.1999.2474).

Firth, P. and Campbell, N.G. (2012) The temporal processing and dichotic listening of musicians versus non-musicians At American Academy of Audiology Annual Conference: Global Perspectives on (C)APD, United States. 30 - 31 Mar 2012.

Fitt, A.D., Goodwin, A.R.H., Ronaldson, K.A. and Wakeham, W.A. (2009) A fractional differential equation for a MEMS viscometer used in the oil industry. [In special issue: Analysis and Numerical Approximation of Singular Problems] Journal of Computational and Applied Mathematics, 229, (2), pp. 373-381. (doi:10.1016/j.cam.2008.04.018).

Flippi, S., Ciavarella, M. and Lazzarin, P. (2002) An approximate, analytical approach to the 'HRR' solution for sharp V notches International Journal of Fracture, 117, (3), pp. 269-286. (doi:10.1023/A:1022057621185).

Forta, Nazim Gizem, Griffin, Michael J. and Morioka, Miyuki (2012) Vibrotactile difference thresholds: Effects of vibration frequency, vibration magnitude, contact area, and body location Somatosensory & Motor Research, 29, (1), pp. 28-37. (doi:10.3109/08990220.2012.662182).

Forte, P., Paternò, M. and Rustighi, E. (2004) A magnetorheological fluid damper for rotor applications International Journal of Rotating Machinery, 10, (3), pp. 175-182. (doi:10.1155/S1023621X04000181).

Frampton, K.D. (2004) The effect of coupling on radiation from convected fluid loaded plates In 2004 Proceedings of the ASME International Mechanical Engineering Congress & Exposition. American Society of Mechanical Engineers..

Freuhmann, R.K., Dulieu-Barton, J.M. and Quinn, S., (2010) Towards a hybrid infrared approach for damage assessment Dulieu-Barton, J.M. and Mines, R.A.W. (eds.) In Advances in Experimental Mechanics VII. Trans Tech. 8 pp, pp. 57-62. (doi:10.4028/www.scientific.net/AMM.24-25.57).

Frostig, Y. and Thomsen, O.T. (2007) Non-linear thermal response of sandwich panels with a flexible core and temperature dependent mechanical properties Composites Part B: Engineering, 39, (1), pp. 165-184. (doi:10.1016/j.compositesb.2007.02.013).

Frostig, Y. and Thomsen, O.T. (2011) Non-linear thermo-mechanical behaviour of delaminated curved sandwich panels with a compliant core International Journal of Solids and Structures, 48, (14-15), pp. 2218-2237. (doi:10.1016/j.ijsolstr.2011.03.027).

Frostig, Y. and Thomsen, O.T. (2011) Geometrically nonlinear thermomechanical response of circular sandwich plates with a compliant core Journal of Mechanics of Materials and Structures, 6, (6), pp. 925-948. (doi:10.2140/jomms.2011.6.925).

Fruehmann, R.K, Dulieu-Barton, J.M. and Quinn, S. (2008) On the thermoelastic response of woven composite materials The Journal of Strain Analysis for Engineering Design, 43, (6), pp. 435-450. (doi:10.1243/03093247JSA381).

Fruehmann, R.K, Dulieu-Barton, J.M. and Quinn, S. (2010) Thermoelastic stress and damage analysis using transient loading Experimental Mechanics, 50, (7), pp. 1075-1086. (doi:10.1007/s11340-009-9295-9).

Fruehmann, R.K., Dulieu-Barton, J.M. and Quinn, S. (2009) Material heterogeneity or stress concentration: the thermoelastic response from woven composite materials subjected to cyclic fatigue At 17th International Conference on Composite Materials. 27 - 29 Jul 2009. 8 pp.

Fruehmann, R.K., Dulieu-Barton, J.M. and Quinn, S. (2010) Assessment of fatigue damage evolution in woven composite materials using infra-red techniques Composites Science and Technology, 70, pp. 937-946. (doi:10.1016/j.compscitech.2010.02.009).

Fruehmann, R.K., Dulieu-Barton, J.M., Quinn, S. and Tyler, J.P. (2014) The use of a lock-in amplifier to apply digital image correlation to cyclically loaded components Optics and Lasers in Engineering, 68, pp. 149-159. (doi:10.1016/j.optlaseng.2014.12.021).

Fruehmann, R.K., Wang, W., Dulieu-Barton, J.M. and Quinn, S. (2011) The application of thermoelastic stress analysis to evaluate debond damage in composite sandwich structures Applied Mechanics and Materials, 70, pp. 470-475. (doi:10.4028/www.scientific.net/AMM.70.470).

Fruehmann, R.K., Waugh, R.C. and Dulieu-Barton, J.M. (2015) A fresh look at assessing structural performance using imaging techniques SPIE Newsroom (doi:10.1117/2.1201506.005788).

Fruhmann, Richard Konrad (2009) Stress and damage assessment in woven composite materials by means of thermoelastic stress analysis University of Southampton, School of Engineering, Science and Mathematics, Doctoral Thesis , 131pp.

Frühmann, R.K., Dulieu-Barton, J.M. and Quinn, S. (2007) Thermoelastic stress analysis of inhomogenous composite materials At 13th International Conference on Experimental Mechanics (ICEM07). 01 - 06 Jul 2007. 8 pp.

Fu, Jie, Ding, Hua, Huang, Yi, Zhang, Wenjing and Langdon, Terence G. (2015) Influence of phase volume fraction on the grain refining of a Ti-6Al-4V alloy by high-pressure torsion Journal of Materials Research and Technology, 4, pp. 2-7. (doi:10.1016/j.jmrt.2014.10.006).

Fuller, C.R., Elliott, S.J. and Nelson, P.A. (1996) Active control of vibration, 1st edition, Academic Press, 332pp.

Furth, Mirjam (2014) The development of a dissipative potential flow model for wave making resistance prediction University of Southampton, Engineering and the Environment, Doctoral Thesis , 156pp.

Furukawa, M., Horita, Z. and Langdon, T.G. (2001) Developing ultrafine grain sizes using severe plastic deformation Advanced Engineering Materials, 3, pp. 121-125. (doi:10.1002/1527-2648(200103)3:3<121::AID-ADEM121>3.0.CO;2-V).

Furukawa, M., Horita, Z., Nemoto, M. and Langdon, T.G. (2001) Review: Processing of metals by equal-channel angular pressing Journal of Materials Science, 36, (12), pp. 2835-2843. (doi:10.1023/A:1017932417043).

Gabard, Gwenael, Beriot, Hadrien and Perrey-Debain, Emmanuel (2013) Analysis of high-order finite elements for convected wave propagation International Journal for Numerical Methods in Engineering, 96, (11), pp. 665-688. (doi:10.1002/nme.4559).

Galloway, Francis, Kahnt, Max, Ramm, Heiko, Worsley, Peter, Zachow, Stefan, Nair, P.B. and Taylor, M. (2013) A large scale finite element study of a cementless osseointegrated tibial tray Journal of Biomechanics, 46, (11), pp. 1900-1906. (doi:10.1016/j.jbiomech.2013.04.021).

Gao, N. and Dwyer-Joyce, R. S. (2000) The effects of surface defects on the fatigue of water and oil lubricated contacts Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology, 214, (6), pp. 611-626. (doi:10.1243/1350650001543458).

Gao, N., Dwyer-Joyce, R. S. and Beynon, J. H. (1999) Effects of surface defects on rolling contact fatigue of 60/40 brass Wear, 225-229, (2), pp. 983-994. (doi:10.1016/S0043-1648(99)00041-1).

Gardonio, P., Bianchi, E. and Elliott, S.J. (2002) Smart panel with multiple active damping decentralised units for the control of sound radiation/transmission At European Research 2002. 11 - 13 Nov 2002.

Gardonio, P., Lee, Y.S., Elliott, S.J. and Debost, S. (2000) In-plane and out-of-plane coupling of matched PVDF sensor actuator pairs for Active Structural Acoustic Control At International Conference on Noise and Vibration Engineering (ISMA25). 13 - 15 Sep 2000. , pp. 833-844.

Gardonio, Paolo, Aoki, Yohko and Elliott, Stephen J. (2008) Smart panels with active wedges [in special issue: Program Abstract for Acoustics'08] Journal of the Acoustical Society of America, 123, (5), p. 3572. (doi:10.1121/1.2934650).

Gedge, Michael, Boltryk, Rosemary J., Glynne Jones, Peter, Hill, Martyn, Mowlem, Matthew and Morgan, Hywel (2009) Modelling of a standing surface acoustic wave device for flow cytometry in an oceanographic sensor At USWNet (Ultrasonic Standing Wave Network) 2009. 03 Nov - 01 Dec 2009.

Georgiadis, Marios, Guizar-Sicairos, Manuel, Zwahlen, Alexander, Trüssel, Andreas J., Bunk, Oliver, Müller, Ralph and Schneider, Philipp (2014) 3D scanning SAXS: a novel method for the assessment of bone ultrastructure orientation Bone, 71, pp. 42-52. (doi:10.1016/j.bone.2014.10.002). (PMID:25306893).

Ghandchi Tehrani, Maryam, Elliott, N.R and Mottershead, John (2010) The receptance method in partial pole placement of structures At International Seminar on Modal Analysis (ISMA2010),, Belgium. 20 - 22 Sep 2010.

Ghandchi Tehrani, Maryam and Elliott, S.J. (2013) Energy harvesting using nonlinear control At Conference on Acoustics AIA-DAGA 2013, Italy. 18 - 21 Mar 2013.

Ghandchi Tehrani, Maryam and Mottershead, John (2012) An overview of the receptance method in active vibration control At MATHMOD 2012, Austria. 15 - 17 Feb 2012.

Ghandchi Tehrani, Maryam, Mottershead, John, James, Simon and Gardonio, Paolo (2008) Pole placement in active vibration suppression using the receptance method At 7th European Conference on Structural Dynamics, United Kingdom. 07 - 09 Jul 2008.

Ghandchi Tehrani, Maryam, Mottershead, John and Ram, Y.M (2008) Eigenvalue sensitivity assignment by the receptance method In Proceedings of ASME 2008 9th Biennial Conference on Engineering Systems Design and Analysis. American Society of Mechanical Engineers., pp. 695-700. (doi:10.1115/ESDA2008-59357).

Ghandchi Tehrani, Maryam, Mottershead, John and Ram, Y.M (2009) Active vibration control by the receptance method At Noise and Vibration: Emerging Methods NOVEM, United Kingdom. 05 - 08 Apr 2009.

Ghandchi Tehrani, Maryam and Ouyang, H. (2011) Receptance-based partial pole assignment for asymmetric systems using state feedback At International Conference on Structural Engineering Dynamics (ICEDyn 2011), Portugal. 20 - 22 Jun 2011.

Ghandchi Tehrani, Maryam and Ouyang, H. (2012) Receptance-based partial pole assignment for asymmetric systems using state feedback Journal of Shock and Vibration, 19, (5), pp. 1135-1142. (doi:10.3233/SAV-2012-0718).

Ghazy, Mohamed Riad Aly (1986) Exciting forces and their relationship to turbocharged diesel engine vibration University of Southampton, Institute of Sound and Vibration Research, Doctoral Thesis , 223pp.

Giraudeau, A., Guo, B. and Pierron, F. (2006) Stiffness and damping identification from full field measurements on vibrating plates Experimental Mechanics, 46, (6), pp. 777-787. (doi:10.1007/s11340-006-9477-7).

Glynne-Jones, Peter, Boltryk, Rosemary, Harris, Nick and Hill, Martyn (2009) A new thin-reflector mode for ultrasonic particle manipulation in layered resonators At IEEE International Ultrasonics Symposium. 20 - 23 Sep 2009.

Glynne-Jones, Peter, Boltryk, Rosemary J., Hill, Martyn, Harris, Nicholas R. and Baclet, Pierre (2009) Robust acoustic particle manipulation: a thin-reflector design for moving particles to a surface Journal of the Acoustical Society of America, 126, (3), pp. 75-79. (doi:10.1121/1.3186800).

Glynne-Jones, Peter, Coletti, M., White, N.M., Gabriel, S.B. and Bramanti, C. (2010) A feasibility study on using inkjet technology, micropumps, and MEMs as fuel injectors for bipropellant rocket engines Acta Astronautica, 67, (1-2), pp. 194-203. (doi:10.1016/j.actaastro.2010.01.027).

Glynne-Jones, Peter, Coletti, Michele, White, Neil M., Gabriel, Stephen and Bramanti, Cristina (2008) A feasibility study on using inkjet technology, micropumps, and MEMs as fuel injectors for bipropellant rocket engines At 44th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, United States. 21 - 23 Jul 2008.

Glynne-Jones, Peter, Hill, Martyn, Boltryk, Rosemary J., Harris, Nicholas R., Melvin, Tracy, Zhang, Fan and Wilkinson, James S. (2008) Multi-modal particle manipulation with integrated optical waveguide detection At 6th USW/Net Conference. 13 - 14 Nov 2008.

Glynne-Jones, Peter, Mishra, Puja P., Boltryk, Rosemary J. and Hill, Martyn (2013) Efficient finite element modeling of radiation forces on elastic particles of arbitrary size and geometry Journal of the Acoustical Society of America, 133, (4), pp. 1885-1893. (doi:10.1121/1.4794393).

Goncalves, P.J., Lopes Jr, V. and Brennan, M.J. (2003) Using LMI techniques to control intelligent structures At IMAC XXI. 03 - 05 Feb 2003.

González, Antonio, Ramos, Antonio, Morgan, Hywel, Green, Nicolas G and Castellanos, Antonio (2006) Electrothermal flows generated by alternating and rotating electric fields in microsystems Journal of Fluid Mechanics, 564, pp. 415-433. (doi:10.1017/S0022112006001595).

Goodwin, A.R.H., Fitt, A.D., Ronaldson, K.A. and Wakeham, W.A. (2006) A vibrating plate fabricated by the methods of microelectromechanical systems (MEMS) for the simultaneous measurement of density and viscosity: results for argon at temperatures between 323 and 423K at pressure up to 68 MPa International Journal of Thermophysics. Proceedings of the Fifteenth Symposium on Thermophysical Properties, Part II, 27, (6), pp. 1650-1676. (doi:10.1007/s10765-006-0114-6).

Goodwin, Anthony R.H., Donzier, Eric P., Vancauwenberghe, Olivier, Fitt, Alistair D., Ronaldson, Kelly A., Wakeham, William A., De Lara, Maria Manrique, Marty, Frederic and Mercier, Bruno (2006) A vibrating edge supported plate, fabricated by the methods of micro electro mechanical system for the simultaneous measurement of density and viscosity: results for methylbenzene and octane at temperatures between (323 and 423) K and pressures in the range (0.1 to 68) MPa Journal of Chemical & Engineering Data, 51, (1), pp. 190-208. (doi:10.1021/je0503296).

Goodwin, Derek William (1968) Low frequency noise in motor cars - study of origins and design parameters University of Southampton, Institute of Sound and Vibration Research, Doctoral Thesis , 362pp.

Gorban, Alexander N. and Karlin, Iliya V. (2005) Invariance correction to Grad's equations: where to go beyond approximations? Continuum Mechanics and Thermodynamics, 17, (4), pp. 311-335. (doi:10.1007/s00161-005-0202-z).

Gorban, Alexander N. and Karlin, Iliya V. (2006) Quasi-equilibrium closure hierarchies for the Boltzmann equation Physica A: Statistical Mechanics and its Applications, 360, (2), pp. 325-364. (doi:10.1016/j.physa.2005.07.016).

Gramatyka, Jakub, Eres, Murat Hakki, Scanlan, James, Moss, Michael and Bates, Ron (2015) An integrated framework for Bayesian uncertainty quantification and probabilistic multi-criteria decision making in aero-engine preliminary design At 16th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Aviation Forum 2015, United States. 22 - 26 Jun 2015.

Gratton, G. and Newman, S. (2006) Towards the tumble resistant microlight Cockpit, January - June

Grech, David, KIANG, Kian Shen, Zekonyte, Jurgita, Stolz, Martin, Woods, Robert and Chong, Harold M.H. (2013) Highly linear and large spring deflection characteristics of a Quasi-Concertina MEMS device At 39th International Conference on Micro and Nano Engineering, United Kingdom. 16 - 19 Sep 2013.

Grice, R.M. and Pinnington, R.J. (2000) A method for the vibration analysis of built-up structures, Part I: Introduction and analytical analysis of the plate-stiffened beam Journal of Sound and Vibration, 230, (4), pp. 825-849. (doi:10.1006/jsvi.1999.2657).

Grice, R.M. and Pinnington, R.J. (2000) Vibration analysis of built-up thin plate structures like car bodies using a finite element model which accommodates only the dominant in-plane motion In, European Conference on Vehicle Noise and Vibration 2000, 10-12 May 2000 IMechE HQ, London. London, IMechE pp. 197-206. (IMechE Conference Transactions 2000-1).

Grice, R.M. and Pinnington, R.J. (2000) Vibration analysis of a thin-plate box using a finite element model which accommodates only in-plane motion Journal of Sound and Vibration, 232, (2), pp. 449-471. (doi:10.1006/jsvi.1999.2748).

Grice, R.M. and Pinnington, R.J. (2000) An electrodynamic shaker with an integral force gauge for high-frequency measurements on lightweight structures Proceedings of the Institution of Mechanical Engineers, Part C, 214, (10), pp. 1285-1297.

Grice, R.M. and Pinnington, R.J. (2000) A method for the vibration analysis of built-up structures, Part II: Analysis of the plate-stiffened beam using a combination of finite element analysis and analytical impedances Journal of Sound and Vibration, 230, (4), pp. 851-875. (doi:10.1006/jsvi.1999.2658).

Griffin, M.J. (2000) Measurement, evaluation, and assessment of occupational exposures to hand-transmitted vibration Occupational and Environmental Medicine, 54, (2), pp. 73-89.

Griffin, M.J. (2000) Standards of the evaluation of hand-transmitted vibration and the prevention of adverse effects At 8th International conference on hand-arm vibration. 01 Jan 2000. , pp. 243-259.

Griffin, M.J. (2007) Discomfort from feeling vehicle vibration Journal of Vehicle System Dynamics, 45, (7-8), pp. 679-698. (doi:10.1080/00423110701422426).

Griffin, M.J., Bovenzi, M. and Nelson, C.M. (2001) A consideration of dose-response relationships for vibration-induced white finger At X2001- Conference on Exposure Assessment in Epidemiology and Practice. 10 - 13 Jun 2001. , pp. 284-286.

Grisbrooke, J. (2003) Living with lifts: a study of users' experiences British Journal of Therapy and Rehabilitation, 10, (2), 76 - 81.

Gropper, Daniel, Wang, Ling and Harvey, Terry J. (2015) Hydrodynamic lubrication of textured surfaces: A review of modeling techniques and key findings Tribology International, 94, pp. 509-529. (doi:10.1016/j.triboint.2015.10.009).

Grote, G., Stanton, N.A. and Weyerb, Johannes (2014) Editorial. Beyond human-centred automation – concepts for human–machine interaction in multi-layered networks [in special issue: Beyond Human-Centred Automation] Ergonomics, 57, (3), pp. 289-294.

Gu, Cheng and Griffin, Michael J. (2011) Vibrotactile thresholds at the sole of the foot: effect of vibration frequency and contact location Somatosensory & Motor Research, 28, (3-4), pp. 86-93. (doi:10.3109/08990220.2011.622493).

Gu, S., Lu, T.J. and Evans, A.G. (2001) On the design of two-dimensional Cellular metals for combined heat dissipation and structural load capacity International Journal of Heat and Mass Transfer, 44, (11), pp. 2162-2175. (doi:10.1016/S0017-9310(00)00234-9).

Gu, S., Lu, T.J., Hass, D.D. and Wadley, H.N.G. (2001) Thermal conductivity of zirconia coatings with zig-zag pore microstructures Acta Materialia, 49, (13), pp. 2539-2547. (doi:10.1016/S1359-6454(01)00141-0).

Gu, S., McCartney, D., Eastwick, C. and Simmons, K. (2004) Numerical modelling of in-flight characteristics of inconel 625 particles during high velocity oxy-fuel thermal spraying Journal of Thermal Spray Technology, 13, (2), pp. 200-213. (doi:10.1361/10599630419337).

Guo, S.J., Keane, A.J. and Moshrefi-Torbati, M. (1997) Vibration analysis of stepped thickness plates Journal of Sound and Vibration, 204, (4), pp. 645-657. (doi:10.1006/jsvi.1997.0955).

Gupta, S., New, A.M.R. and Taylor, M. (2006) Bone remodelling inside a cemented resurfaced femoral head Clinical Biomechanics, 21, (6), pp. 594-602. (doi:10.1016/j.clinbiomech.2006.01.010).

Gustavsson, F, Jacobson, S, Cavaleiro, A and Polcar, T. (2013) Frictional behavior of self-adaptive nanostructural Mo-Se-C coatings in different sliding conditions Wear, 303, (1-2), pp. 286-296. (doi:10.1016/j.wear.2013.03.032).

Gustavsson, F, Jacobson, S, Cavaleiro, A and Polcar, T. (2013) Ultra-low friction W-S-N solid lubricant coating Surface and Coatings Technology, 232, pp. 541-548. (doi:10.1016/j.surfcoat.2013.06.026).

Habbab, H., Mellor, B.G. and Syngellakis, S. (2006) Post-yield characterisation of metals with significant pile-up through spherical indentations Acta Materialia, 54, (7), pp. 1965-1973. (doi:10.1016/j.actamat.2005.12.021).

Hack, Erwin, Fruehmann, Richard K., Roos, René, Feligiotti, Mara, Schuetz, Philipp, Tyler, John P. and Dulieu-Barton, Janice M. (2015) Flaw and damage assessment in torsionally loaded CFRP cylinders using experimental and numerical methods Composite Structures, 132, pp. 109-121. (doi:10.1016/j.compstruct.2015.05.025).

Hall, Nicholas and Potts, Chris (2005) The coordination of scheduling and batch deliveries Annals of Operations Research, 135, (1), pp. 41-64. (doi:10.1007/s10479-005-6234-8).

Hamad, W.I., Owen, J.S. and Hussein, M.F.M. (2010) Modelling the nonlinear behaviour of a cracked reinforced concrete beam At International Conference on Computing in Civil and Building Engineering, United Kingdom. 30 Jun - 02 Jul 2010.

Hamad, W.I., Owen, J.S. and Hussein, M.F.M. (2011) The use of fictitious crack model in modelling the vibration behaviour of cracked reinforced concrete beams At 8th International Conference on Structural Dynamics (EURODYN), Belgium. 04 - 06 Jul 2011.

Hamilton, A.R., Thomsen, O.T., Madaleno, L.A.O., Jensen, L.R., Rauhe, J.C.M. and Pyrz, R. (2013) Evaluation of the anisotropic mechanical properties of reinforced polyurethane foams Composites Science and Technology, 87, pp. 210-217. (doi:10.1016/j.compscitech.2013.08.013).

Hanzal, Robert J.F. (2013) Rolling contact fatigue failures in silicon nitride and their detection University of Southampton, Faculty of Engineering and the Environment, Doctoral Thesis , 272pp.

Harland, N.R., Jones, R.W. and Mace, B.R. (2000) Auto-tuning of a tunable structural insert At ISMA2002, International Conference on Noise and Vibration Engineering. 16 - 18 Sep 2002. 8 pp.

Harris, C.J., Hong, X. and Wilson, P.A. (1999) An intelligent guidance and control system for ship obstacle avoidance In Proceedings CIMA'99. Natural and Artificial Intelligence Systems Organisation., pp. 234-240.

Harris, N.R., Hill, M., Torah, R., Townsend, R., Beeby, S., White, N.M. and Ding, J. (2006) A multilayer thick-film PZT actuator for MEMs applications Sensors and Actuators A: Physical, 132, (1), pp. 311-316. (doi:10.1016/j.sna.2006.06.006).

Harris, Nicholas and Hill, Martyn (2008) Particle manipulation using ultrasonic fields In, Dongqing, Li (eds.) Encyclopedia of Microfluidics and Nanofluidics. New York, USA, Springer

Harris, Nick, Townsend, Rosemary and Hill, Martyn (2008) Towards a binary particle fractionator At 6th USWNet Conference. 13 - 14 Nov 2008.

Harrison, M.F., Thompson, D.J. and Jones, C.J.C. (2000) The calculation of noise from railway viaducts and bridges Proceedings of the Institution of Mechanical Engineers, Part F, 214, (3), pp. 125-134.

Harte, James M., Elliott, Stephen J. and Rice, Henry J. (2005) A comparison of various nonlinear models of cochlear compression Journal of the Acoustical Society of America, 117, (6), pp. 3777-3786. (doi:10.1121/1.1906059).

Harvey, T.J., Morris, S., Wang, L., Wood, R.J.K. and Powrie, H.E.G. (2007) Real-time monitoring of wear debris using electrostatic sensing techniques Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology, 221, (1), pp. 27-40. (doi:10.1243/13506501JET196).

Harvey, T.J., Walker, J.C., King, Simon and Wood, R.J.K. (2013) Results of a UK industrial tribological survey National Centre for Advanced Tribology (nCATS) 27pp.

Harvey, T.J., Wharton, J.A. and Wood, R.J.K. (2007) Development of synergy model for erosion-corrosion of carbon steel in a slurry pot Tribology: Materials, Surfaces & Interfaces, 1, (1), pp. 33-47. (doi:10.1179/175158407X181471).

Harvey, T.J., Wood, R.J.K., Denuault, G. and Powrie, H.E.G. (2002) Investigation of electrostatic charging mechanisms in oil lubricated tribo-contacts Tribology International, 35, (9), pp. 605-614. (doi:10.1016/S0301-679X(02)00060-9).

Harvey, T.J., Wood, R.J.K. and Powrie, H.E.G. (2007) Electrostatic wear monitoring of rolling element bearings Wear, 263, (7-12), pp. 1492-1501. (doi:10.1016/j.wear.2006.12.073).

Haward, B.H. and Griffin, M.J. (2000) Normative data for grip strength and manual dexterity tests At International Workshop: Diagnosis of Injuries Caused by Hand-transmitted Vibration. 11 - 12 Sep 2000. , pp. 53-54.

Haward, B.M. and Griffin, M.J. (2000) The repeatability of grip strength and manual dexterity tests and the effects of age and gender At International Workshop: Diagnosis of Injuries Caused by Hand-transmitted Vibration. 11 - 13 Sep 2000. , 53 - 54.

He, Binyan, Katsamenis, Orestis L., Mellor, Brian and Reed, Philippa A.S. (2015) 3-D analysis of fatigue crack behaviour in a shot peened steam turbine blade material Materials Science and Engineering: A, 642, pp. 91-103. (doi:10.1016/j.msea.2015.06.082).

He, Y., Wang, S.C., Walsh, F.C., Li, W., He, L and Reed, P.A.S. (2015) The monitoring of coating health by in situ luminescent layers RSC Advances, 5, pp. 42965-42970. (doi:10.1039/c5ra04475h).

Hebb, R.I., Dulieu-Barton, J.M., Worden, K. and Tatum, P., (2009) Curve fitting of mixed-mode isopachics Dulieu-Barton, J.M. (ed.) In 7th International Conference on Modern Practice in Stress and Vibration Analysis. Institute of Physics Publishing. 8 pp, p. 12062. (doi:10.1088/1742-6596/181/1/012062).

Hebb, R.I., Dulieu-Barton, J.M., Worden, K. and Tatum, P., (2010) Towards the derivation of stress intensity factors by parametric modelling of full-field thermoelastic data Dulieu-Barton, J.M. and Mines, R.A.W. (eds.) In Advances in Experimental Mechanics VII. Trans Tech. 8 pp, pp. 227-232. (doi:10.4028/www.scientific.net/AMM.24-25.227).

Hellstrom, Leo H.O., Ganapathisubramani, Bharathram and Smits, Alexander J. (2015) The evolution of large-scale motions in turbulent pipe flow Journal of Fluid Mechanics, pp. 1-14. (doi:10.1017/jfm.2015.418).

Hendijanizadeh, M. (2014) Design and optimisation of constrained electromagnetic energy harvesting devices University of Southampton, Faculty of Engineering and the Environment, Doctoral Thesis , 221pp.

Hendijanizadeh, M., Moshrefi-Torbati, M. and Sharkh, S.M. (2013) Constrained design optimisation of vibration energy harvesting devices Journal of Vibration and Acoustics, 136, (2), p. 21001. (doi:10.1115/1.4025877).

Hill, M. and Bryant, I.P. (1995) A practical design exercise for first year students International Journal of Mechanical Engineering, 23, pp. 195-202.

Hill, Martyn and Harris, Nicholas R. (2008) Ultrasonic microsystems for bacterial cell manipulation In, Principles of Bacterial Detection: Biosensors, Recognition Receptors and Microsystems. New York, USA, Springer pp. 909-928. (doi:10.1007/978-0-387-75113-9_35).

Hill, Martyn, Shen, Yijun and Hawkes, Jeremy J. (2002) Modelling of layered resonators for ultrasonic separation Ultrasonics, 40, (1-8), pp. 385-392. (doi:10.1016/S0041-624X(02)00127-0).

Hinke, Lars (2008) Modelling approaches for the low-frequency analysis of built-up structures with non-deterministic properties University of Southampton, Institute of Sound and Vibration Research, Doctoral Thesis , 208pp.

Hong, X., Harris, C.J. and Wilson, P.A. (1999) Neurofuzzy state identification using prefiltering Control Theory and Applications, IEE Proceedings, 146, (2), pp. 234-240. (doi:10.1049/ip-cta:19990121).

Hopkins, A.R., Checa-Esteban, S., Taylor, M., New, A.M.R. and Rodriguez, F. (1970) Uni-compartmental knee arthroplasty modelling At 5th World Congress of Biomechanics. 29 Jul - 04 Aug 2006.

Hopkins, A.R., Hansen, U.N., Amis, A.A., Taylor, M., Gronaud, N. and Anglin, C. (2006) Finite element modelling of glenohumeral kinematics following total shoulder arthroplasty Journal of Biomechanics, 39, (13), pp. 2476-2483. (doi:10.1016/j.jbiomech.2005.07.031).

Hopkins, A.R., Taylor, M., Checa-Esteban, S., New, A.M.R. and Maletsky, L. (1970) Development of an FE model of a uni-compartmental knee replacement At 7th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering (CMBBE2006). 22 - 25 Mar 2006.

Hopkins, Andrew R., Hansen, Ulrich N., Amis, Andrew A., Knight, Lucy, Taylor, Mark, Levy, Ofer and Copeland, Stephen A. (2007) Wear in the prosthetic shoulder: association with design parameters Journal of Biomechanical Engineering, 129, (2), pp. 223-230. (doi:10.1115/1.2486060).

Hopkins, Andrew R., Hansen, Ulrich N., Amis, Andrew A., Taylor, Mark and Emery, Roger J. (2007) Glenohumeral kinematics following total shoulder arthroplasty: a finite element investigation Journal of Orthopaedic Research, 25, (1), pp. 108-115. (doi:10.1002/jor.20290).

Hopper, Hugh (2012) Reverberation enhancement for small rooms University of Southampton, Faculty of Engineering and the Environment, Doctoral Thesis , 174pp.

Horita, Z. and Langdon, T.G. (2007) Microstructural evolution in the processing of bulk samples using high-pressure torsion Materials Science Forum, 539-543, pp. 80-85.

Horita, Zenji, Matsubara, Kiyoshi, Makii, Koichi and Langdon, Terence G. (2002) A two-step processing route for achieving a superplastic forming capability in dilute magnesium alloys Scripta Materialia, 47, (4), pp. 255-260. (doi:10.1016/S1359-6462(02)00135-5).

Hosseini, R. and Nobakhti, S. (2009) Examining the evaluating systems for mechanical engineering programs At Proceedings of the International Conference on Engineering Education, Iran, Islamic Republic of. 9 pp.

Howarth, H.V.C. and Griffin, M.J. (2000) Effect of foreground visual information on motion sickness caused by lateral oscillation At 35th UK Group Meeting on Human Response to Vibration. 13 - 15 Sep 2000. , pp. 281-290.

Howell, Geoff, Achintha, Mithila, Dulieu-Barton, Janice and Robinson, Andy (2014) A stress free model for residual stress assessment using thermoelastic stress analysis At International Conference on Experimental Mechanics (icEM2014), Singapore. 15 - 17 Nov 2014.

Howell, Geoff, Dulieu-Barton, Janice and Achintha, Mithila (2015) Validation of a synthetic bitmap for the development of residual stress assessment using thermoelastic stress analysis At 10th International Conference on Advances in Experimental Mechanics, United Kingdom. 01 - 03 Sep 2015.

Howls, C.J. and Berry, M.V., NIST (2010) Integrals with coalescing saddles In, Olver, F.W.J., Lozier, D.W, Boisvert, R.F and Clark, C.W (eds.) NIST Handbook of Mathematics Functions. Cambridge, UK, Cambridge University Press

Hsu, S.S., Huang, Z., Iwnicki, S.D., Thompson, D.J., Jones, C.J.C., Xie, G. and Allen, P.D. (2007) Experimental and theoretical investigation of railway wheel squeal Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 221F, (1), pp. 59-73. (doi:10.1243/0954409JRRT85).

Hu, D., Balachandran, W., Yule, A.J., Watkins, A.P. and Shrimpton, J.S. (1996) Electrostatic atomization of insulating oils and the associated charge injection mechanism Institute of Physics Conference Series, 143, pp. 205-210.

Hu, G.H. and Newman, S.J. (2006) A full-span free-wake model using circular-arc vortex elements and incorporating rotor trim analysis Journal of Aerospace Engineering, 220, (2), pp. 145-163. (doi:10.1243/09544100G04704).

Huang, Xun, Zhang, Xin and Richards, Simon Keith (2008) Adaptive mesh refinement computation of acoustic radiation from an engine intake Aerospace Science and Technology, 12, (5), pp. 418-426. (doi:10.1016/j.ast.2007.09.004).

Huang, Y. and Langdon, T.G. (2002) Characterization of deformation processes in a Zn-22% Al Alloy using atomic force microscopy Journal of Materials Science, 37, (23), pp. 4993-4998. (doi:10.1023/A:1021071228521).

Huang, Yi, Kawasaki, Megumi and Langdon, Terence G. (2014) An evaluation of the shearing patterns introduced by different anvil alignments in high-pressure torsion Journal of Materials Science, 49, pp. 3146-3157. (doi:10.1007/s10853-014-8015-8).

Hughes, A., Hill, J., Jones, R., Purchase, T., Hill, M., Boltryk, R.J., Gedge, M. and Glynne-Jones, P. (2009) Development of an ultrasonic particle trap incorporating 3-dimensional geometric features At USWNet 20009. "Unidirectional Motion Produced by Vibrating Fields for Cell/Particle and Fluid Control", Sweden. 30 Nov - 01 Dec 2009.

Hughes, A., Hill, J., Jones, R., Purchase, T., Hill, M., Boltryk, R.J., Gedge, M. and Glynne-Jones, P. (2009) Development of an ultrasonic particle trap incorporating 3-dimensional geometric features At IEEE International Ultrasonics Symposium. 20 - 23 Sep 2009.

Hunt, H.E.M., Hussein, M.F.M., Jones, S. and Kuo, K.A. (2010) Ground-borne vibration from underground railways: some commonly-made modelling assumptions and their associated inaccuracies and uncertainties At Noise in the Built Environment, Belgium. 29 - 30 Apr 2010.

Hussain, B., Sharkh, S.M., Hussain, S. and Abusara, M.A. (2013) An adaptive relaying scheme for fuse saving in distribution networks with distributed generation IEEE Transactions on Power Delivery, 28, (2), pp. 669-677. (doi:10.1109/TPWRD.2012.2224675).

Hussein, M.F.M. (2010) Modelling vibration from surface and underground railways as an evolutionary random process At International Conference on Computing in Civil and Building Engineering, United Kingdom. 30 Jun - 02 Jul 2010.

Hussein, M.F.M., Hunt, H.E.M., Kuo, K.A., Costa, P.A. and Barbosa, J. (2013) The dynamic effect of a piled-foundation building on an incident vibration field from underground railway tunnel At 20th International Congress on Sound and Vibration, Thailand. 07 - 11 Jul 2013.

Hyde, A.S. and Wilson, P.A. (1992) Time domain calculation of the motion of a horizontal cylinder International Shipbuilding Progress, 39, (418), pp. 177-193.

Issac, G., Spencer, A., Worden, K. and Dulieu-Barton, J.M. (2007) The effect of crack-tip interactions on the curve-fitting of mixed-mode isopachics At 13th International Conference on Experimental Mechanics (ICEM 13). 01 - 06 Jul 2007. 2 pp, pp. 865-858.

Jakobsen, J., Andreasen, J. and Thomsen, O.T. (2013) A comparison of gel point for a glass/epoxy composite and a neat epoxy material during isothermal curing Journal of Composite Materials, 48, (8), pp. 917-929. (doi:10.1177/0021998313480197).

Jakobsen, J., Andreasen, J.H. and Thomsen, O.T. (2009) Crack deflection by core junctions in sandwich structures Engineering Fracture Mechanics, 76, (14), pp. 2135-2147. (doi:10.1016/j.engfracmech.2009.01.013).

Jakobsen, J., Thomsen, O.T., Andreasen, J.H. and Bozhevolnaya, E. (2009) Crack deflection analyses of different peel stopper designs for sandwich structures [in special issue: ONR - Dynamic Failure and Durability] Composites Science and Technology, 69, (6), pp. 870-875. (doi:10.1016/j.compscitech.2008.01.021).

Jamil, M., Sharkh, S.M., Nasir Javid, M. and Nagendra, V.V. (2009) Active control of vibrations of a tall structure excited by external forces At 6th International Bhurban Conference on Applied Sciences and Technology (IBCAST). 05 - 08 Jan 2009.

Jantapremjit, Pakpong and Wilson, P. A. (2008) Autonomous homing and docking tasks for an underwater vehicle Journal of Bionic Engineering

Jeffers, Jonathan R.T., Browne, Martin, Lennon, Alexander B., Prendergast, Patrick J. and Taylor, Mark (2007) Cement mantle fatigue failure in total hip replacement: experimental and computational testing Journal of Biomechanics, 39, (7), pp. 1525-1533. (doi:10.1016/j.jbiomech.2006.07.029).

Jeffers, Jonathan R.T., Browne, Martin, Roques, Anne and Taylor, Mark (2005) On the importance of considering porosity when simulating the fatigue of bone cement Journal of Biomechanical Engineering, 127, (4), pp. 563-570. (doi:10.1115/1.1934182).

Jeffery, P.A., Sykulski, J.K. and McBride, J.W. (1997) 3D finite element analysis modelling of the arc chamber of a current limiting miniature circuit breaker At Proceedings of International Symposium on Electromagnetic Fields in Electrical Engineering (ISEF'97). 25 - 27 Sep 1997. , pp. 130-133.

Jenkins, G. (2013) Models for the prediction of rear-arc and forward-arc fan broadband noise in turbofan engines University of Southampton, Faculty of Engineering and the Environment, Doctoral Thesis , 251pp.

Ji, L. and Mace, B.R. (2008) Statistical energy analysis modelling of complex structures as coupled sets of oscillators: ensemble mean and variance energy Journal of Sound and Vibration, 317, (3-5), pp. 760-780. (doi:10.1016/j.jsv.2008.03.030).

Jiang, Liudi, Lewis, G., Spearing, S. M., Jennett, N. M. and Monclus, M. (2010) Development of a low temperature amorphous Si/Ti for integrated MEMS/NEMS Microelectronic Engineering, 87, (5-8), pp. 1259-1262. (doi:10.1016/j.mee.2009.11.039).

Jiang, R., Everitt, S. and Lewandowski, M. et al. (2013) Grain size effects in a Ni-based turbine disc alloy in the time and cycle dependent crack growth regimes International Journal of Fatigue, 62, pp. 217-227. (doi:10.1016/j.ijfatigue.2013.07.014).

Jiang, R., Karpasitis, N., Gao, N. and Reed, P.A.S. (2015) Effects of microstructures on fatigue crack initiation and short crack propagation at room temperature in an advanced disc superalloy Materials Science and Engineering: A, 641, pp. 148-159. (doi:10.1016/j.msea.2015.05.065).

Jiang, Rong, Everitt, Stewart, Gao, Nong, Soady, K.A., Brooks, Jeffery and Reed, Philippa A.S. (2015) Influence of oxidation on fatigue crack initiation and propagation in turbine disc alloy N18 International Journal of Fatigue, 75, pp. 89-99. (doi:10.1016/j.ijfatigue.2015.02.007).

Jiang, Rong, Gao, Nong and Reed, Philippa (2015) Influence of orientation-dependent grain boundary oxidation on fatigue cracking behaviour in an advanced Ni-based superalloy Journal of Materials Science, 50, (12), pp. 4379-4386. (doi:10.1007/s10853-015-8992-2).

Jiang, X. and Luo, K.H. (2001) Direct numerical simulation of transitional noncircular buoyant reactive jets Theoretical and Computational Fluid Dynamics, 15, (3), pp. 183-198. (doi:10.1007/PL00013288).

Jiang, X., Zhao, H. and Luo, K.H., (2006) Direct simulation of a transitional unsteady impinging hot jet Lamballais, Eric, Friedrich, Rainer, Geurts, Bernard J. and Métais, Olivier (eds.) In Direct and Large-Eddy Simulation VI. Springer. 8 pp, pp. 487-494. (doi:10.1007/978-1-4020-5152-2_56).

Jiang, X., Zhao, H. and Luo, K.H. (2007) Direct computation of a perturbed impinging hot jets Computers & Fluids, 36, (2), pp. 259-272. (doi:10.1016/j.compfluid.2006.01.015).

Jiang, X., Zhao, H. and Luo, K.H. (2007) Direct numerical simulation of a non-premixed impinging jet flame Journal of Heat Transfer, 129

Jiang, X., Zhao, H. and Luo, K.H. (2007) Direct numerical simulation of a non-premixed impinging jet flame Journal of Heat Transfer, 129, (8), pp. 951-957. (doi:10.1115/1.2737480).

Jiang, Z., Su, J., Han, Y., Alshahrani, F., Hao, Z. and Xiao, T. (2005) Effects of transition metal in Sn-based pyrochlores on the methane catalytic combustion [in special issue: Green Chemistry and Future Energy] Progress in Natural Science, 15, supplement 1, pp. 134-138. (doi:10.1080/10020070512330020).

Johannes, M., Dulieu-Barton, J.M., Bozhevolnaya, E. and Thomsen, O.T. (2007) Thermoelastic stress analysis of sandwich structures with core junctions At 13th International Conference on Experimental Mechanics (ICEM 13). 01 - 06 Jul 2007. 8 pp.

Johannes, M., Dulieu-Barton, J.M., Bozhevolnaya, E. and Thomsen, O.T. (2008) Characterization of local effects at core junctions in sandwich structures using thermoelastic stress anaylsis The Journal of Strain Analysis for Engineering Design, 43, (6), pp. 469-492. (doi:10.1243/03093247JSA389).

Johannes, M., Dulieu-Barton, J.M., Bozhevolnaya, E. and Thomsen, O.T., (2008) Evaluation of the stresses at core junctions in sandwich structure using thermoelastic stress analysis Ferreira, António (ed.) In Proceedings of the 8th International Conference on Sandwich Structures (ICSS8). Publindústria, Produção de Comunicação, Lda. 12 pp, pp. 138-149.

Johannes, M. and Thomsen, O.T. (2010) Examination of the failure of sandwich beams with core junctions subjected to transverse shear loading Journal of Sandwich Structures and Materials, 12, (2), pp. 199-236. (doi:10.1177/1099636209105379).

Jones, C.J.C., Sheng, X. and Petyt, M. (2000) Simulation of ground vibrations from a moving harmonic load on a railway track Journal of Sound and Vibration, 231, (3), pp. 739-751. (doi:10.1006/jsvi.1999.2559).

Jones, C.J.C., Sheng, X. and Thompson, D.J. (2000) Ground vibration from a moving load on a railway track on layered ground At Proceedings of Seminar on High Speed Lines on Soft Ground. 16 - 17 Mar 2000. 15 pp, [15pp].

Jones, C.J.C., Sheng, X. and Thompson, D.J., (2000) Ground vibration from dynamic and quasi-static loads moving along a railway track on layered ground Schmid, G. and Chouw, N. (eds.) In Wave 2000: Wave Propagation, Moving Load, Vibration Reduction, Proceedings of International Workshop ..., Dec 2000, Bochum Germany. A.A.Balkema. 456 pp, pp. 83-97.

Jones, C.J.C. and Thompson, D.J. (2000) Rolling noise generated by railway wheels with visco-elastic layers Journal of Sound and Vibration, 231, (3), pp. 779-790. (doi:10.1006/jsvi.1999.2562).

Jones, C.J.C., Thompson, D.J., Frid, A. and Wallentin, M.O., (2000) Design of a railway wheel with acoustically improved cross-section and constrained layer damping Cassereau, D. (ed.) In Internoise 2000 : Proceedings of the 29th International Congress on Noise Control Engineering, 27-30 Aug 2000, Nice, France. Société Française d'Acoustique (S.F.A.)., pp. 673-678.

Jones, C.J.C., Thompson, D.J. and Petyt, M. (2000) Studies using a combined finite element and boundary element model for vibration propagation from railway tunnels In ICSV7 : Proceedings of the Seventh International Congress on Sound and Vibration, Garmisch-Partenkirchen, Germany, July 4-7, 2000. International Institute of Acoustics and Vibration (IIAV)., pp. 2703-2710.

Jones, C.J.C., Thompson, D.J. and Wu, T.X. (2003) An advanced track model for use in the prediction of wheel-rail rolling noise Acta Acoustica, 89, (Supplement 1)

Jones, R., Beier, M., Dielh, R., Jones, C., Maderboeck, M., Middleton, C. and Verheij, J., (2000) Vehicle-mounted shields and low trackside barriers for railway noise control in a European context Cassereau, D. (ed.) In InterNoise 2000 : Proceedings 29th International Congress on Noise Control Engineering, Nice, France, Aug 27-30 2000 August 27-30, 2000Proceedings of Internoise 2000, Nice France, 27-30 August 2000. Société Française d'Acoustique (S.F.A.)., pp. 667-672.

Jones, R.W., Chew, S.K., Ko, I., Olsen, B.L. and Mace, B.R., (2001) Velocity estimator based compensation for loudspeakers Isermann, R. (ed.) In Mechatronic systems : Proceedings of the 1st IFAC Conference on Mechatronic Systems, Darmstadt, September 18-20, 2000. Elsevier. 1202 pp.

Jones, R.W. and Mace, B.R., (2001) Developing a mechatronic engineering degree for New Zealand Isermann, R. (ed.) In Mechatronic Systems : Proceedings of the 1st IFAC Conference on Mechatronic Systems, Darmstadt, Germany, September 18-20, 2000. Elsevier., 6pp..

Jones, R.W., Olsen, B.L. and Mace, Brian R. (2005) Fast adaptive noise control in ducts The Environmental Engineering Journal, 19, pp. 1-17.

Jones, Richard W., Mace, Brian R. and Tham, Ming T. (2002) The evolution of mechanical engineering curricula: mechatronics At ICEE 2002 Conference. 18 - 21 Aug 2002. 6 pp, pp. 1-6.

Joseph, P.F., Fruteau, E. and Nelson, P.A. (2001) Design rules and sensing strategies for the active control of turbofan engine noise At 7th AIAA/CEAS Aeroacoustics Conference. 28 - 30 May 2001. 11 pp.

Joyce, M.R., Syngellakis, S. and Reed, P.A.S. (2004) Fatigue crack initiation and early growth in a multiphase Al alloy included in a multilayer material system Materials Science and Technology, 20, (1), pp. 47-56. (doi:10.1179/026708304225010389).

Ju, S., Shenoi, R.A., Jiang, D. and Sobey, A.J. (2012) Multi-parameter optimization of lightweight composite triangular truss structure based on response surface methodology Composite Structures, 97, pp. 107-116. (doi:10.1016/j.compstruct.2012.10.025).

Kalkowski, Michal, Rustighi, E. and Waters, T.P. (2012) Wave based method for inducing delamination at the interface of a layered structure: feasibility study At International Conference on Noise and Vibration Engineering: ISMA 2012, Belgium. 17 - 19 Sep 2012. , pp. 1881-1895.

Kamesh, P. (2011) Oil-whirl instability in an automotive turbocharger University of Southampton, Insitute of Sound and Vibration Research, Doctoral Thesis , 289pp.

Kamesh, P., Brennan, M.J. and Holmes, R. (2008) An investigation into the gyroscopic effects on the dynamic behaviour of a turbocharger In Proceedings of the Ninth International Conference in Vibrations in Rotating Machinery: v. 1 & 2. Chandos., pp. 685-696.

Kammers, Adam D., Wongsa-Ngam, Jittraporn, Langdon, Terence G. and Daly, Samantha (2015) The microstructure length scale of strain rate sensitivity in ultrafine-grained aluminum Journal of Materials Research, 30, (7), pp. 981-992. (doi:10.1557/jmr.2015.58).

Kamnis, S. and Gu, S. (2005) Numerical modelling of droplet impingement Journal of Physics D: Applied Physics, 38, (19), pp. 3664-3673. (doi:10.1088/0022-3727/38/19/015).

Kamnis, S. and Gu, S. (2006) 3-D modelling of kerosene-fuelled HVOF thermal spray gun Chemical Engineering Science, 61, (16), pp. 5427-5439. (doi:10.1016/j.ces.2006.04.005).

Kamnis, Spyros and Gu, Sai (2007) Computational fluid dynamic modelling of water-cooling mechanism during thermal spraying process International Journal of Modelling, Identification and Control, 2, (3), pp. 229-234. (doi:10.1504/IJMIC.2007.014940).

Kamp, N., Parry, M.R., Singh, K.D. and Sinclair, I. (2004) Analytical and finite element modelling of roughness induced crack closure Acta Materialia, 52, (2), pp. 343-353. (doi:10.1016/j.actamat.2003.09.019).

Kamp, N., Sinclair, I. and Starink, M.J. (2002) Toughness-strength relations in the overaged 7449 Al-Based alloy Metallurgical and Materials Transactions A, 33, (4), pp. 1125-1136. (doi:10.1007/s11661-002-0214-2).

Kamps, Timothy, Walker, John, Wood, Robert, Lee, Peter and Plint, A. G. (2017) Data supporting: Scuffing mechanisms of EN-GJS 400-15 spheroidal graphite cast iron against a 52100 bearing steel in a PAO lubricated reciprocating contact University of Southampton doi:10.5258/SOTON/403226 [Dataset]

Karlin, Iliya V. and Ansumali, Santosh (2007) Renormalization of the lattice Boltzmann hierarchy Physical Review E, 76, (2), 025701(R)-[4pp]. (doi:10.1103/PhysRevE.76.025701).

Karlin, Iliya V., Tomboulides, Ananias G., Frouzakis, Christos E. and Ansumali, Santosh (2006) Kinetically reduced local Navier-Stokes equations: an alternative approach to hydrodynamics Physical Review E, 74, (3), 035702(R)-[12pp]. (doi:10.1103/PhysRevE.74.035702).

Karpov, E.G., Dorofeev, D.L. and Stephen, N.G. (2001) On the characteristic deformation spectrum of repetitive beam-like lattices At Mechanics and Materials Conference (McMAT) 2001. 01 Jun 2001.

Karpov, E.G., Stephen, N.G. and Dorofeev, D.L. (2002) On static analysis of finite repetitive structures by discrete Fourier transform International Journal of Solids and Structures, 39, (16), pp. 4291-4310. (doi:10.1016/S0020-7683(02)00259-7).

Karpov, E.G., Stephen, N.G. and Dorofeev, D.L. (2002) Virtual load and substructure method in repetitive structures analysis by discrete fourier transform At 14th US National Congress on Theorectical and Applied Mechanics (USNCTAM14). 23 - 28 Jun 2002. , pp. 600-601.

Karpov, E.G., Stephen, N.G. and Dorofeev, D.L. (2002) Characteristic modal analysis for static response of regular frameworks At 3rd International Conference on Identification in Engineering Systems. 01 Apr 2002. , pp. 311-20.

Kashdan, Julian T., Lienemann, Holger and Shrimpton, John S. (2007) Single-fluid and dual-fluid atomisation methods: local and global spray quantities Atomization and Sprays, 17, (2), pp. 123-151. (doi:10.1615/AtomizSpr.v17.i2.20).

Kashdan, Julian T. and Shrimpton, John S. (2006) Characteristics of transient, swirl-generated, hollow-cone sprays Atomization and Sprays, 16, (5), pp. 498-510. (doi:10.1615/AtomizSpr.v16.i5.20).

Kashdan, Julian T., Shrimpton, John S. and Arcoumanis, C. (2002) Dynamic structure of direct-injection gasoline engine sprays: air flow and density effects Atomization and Sprays, 12, (4), pp. 539-557. (doi:10.1615/AtomizSpr.v12.i4.100).

Katsamenis, Orestis L., Chong, Harold M.H., Andriotis, Orestis G. and Thurner, Philipp J. (2013) Load-bearing in cortical bone microstructure: selective stiffening and heterogeneous strain distribution at the lamellar level Journal of the Mechanical Behavior of Biomedical Materials, 17, pp. 152-165. (doi:10.1016/j.jmbbm.2012.08.016). (PMID:23131790).

Katsamenis, Orestis L., Jenkins, Thomas and Thurner, Philipp J. (2015) Toughness and damage susceptibility in human cortical bone is proportional to mechanical inhomogeneity at the osteonal-level Bone, 76, pp. 158-168. (doi:10.1016/j.bone.2015.03.020). (PMID: 25863123).

Kawasaki, Megumi and Langdon, Terence G. (2014) Evaluating the flow properties of ultrafine-grained materials Advanced Materials Research, 829, (3), pp. 3-9. (doi:10.4028/www.scientific.net/AMR.829.3).

Kazopoulo, M., Kaysi, I. and El-Fadel, M. (2007) A stated-preference approach towards the implementation of I/M programs Transportation Research Part D: Transport and Environment, 12, (5), pp. 358-370. (doi:10.1016/j.trd.2007.04.002).

Keane, A.J. and Robinson, G.M. (1999) Experiences with optimizers in design At 14th International Symposium on Air Breathing Engines (ISABE). 05 - 10 Sep 1999. , p. 89.

Keary, A.C., Syngellakis, S. and Bowen, R.J. (2001) Experimental and analytical study of thermal stresses during pipe freezing Proceedings of the Institution of Mechanical Engineers. Part E: Journal of Process Mechanical Engineering, 215, (1), pp. 63-77. (doi:10.1243/0954408011530307).

Kerimbekov, R.M. and Tutty, O.R. (2007) Active control of flows with trapped vortices At IUTAM Symposium on Unsteady Separated Flows and their Control. 18 - 22 Jun 2007. 5 pp, pp. 1-5. (Submitted).

Kerswell, R.R. and Tutty, O.R. (2007) Recurrence of travelling waves in transitional pipe flow Journal of Fluid Mechanics, 584, pp. 69-102. (doi:10.1017/S0022112007006301).

Kewin, Matthew Fergus (2013) Acoustic liner optimisation and noise propagation through turbofan engine intake ducts University of Southampton, Engineering and the Environment, Doctoral Thesis , 179pp.

Khalili, S.M.R., Rahmani, O., Malekzadeh Fard, K. and Thomsen, O.T. (2012) High-order modeling of circular cylindrical composite sandwich shells with a transversely compliant core subjected to low velocity impact Mechanics of Advanced Materials and Structures, 21, (8), pp. 680-695. (doi:10.1080/15376494.2012.707297).

Khamukhin, A. A. and Eres, M.H. (2014) An improvement of the concept design analysis method by the use of the avoidance function At International Conference on Mechanical Engineering, Automation and Control Systems 2014, Russian Federation. 16 - 18 Oct 2014.

Khennouf, D., Dulieu-Barton, J.M., Chambers, A.R., Lennard, F.J. and Eastop, D.D. (2008) Application of digitial image correlation to deformation measurements in textiles At Photomechanics, 2008,. 07 - 09 Jul 2008.

Khennouf, D., Dulieu-Barton, J.M., Chambers, A.R., Lennard, F.J. and Eastop, D.D. (2010) Assessing the feasibility of monitoring strain in historical tapestries using Digital Image Correlation Strain, 46, (1), pp. 19-32. (doi:10.1111/j.1475-1305.2009.00637.x).

Kiaee, Mahdi, Cruden, Andrew, Infield, David and Chladek, Petr (2012) Improvement of power system frequency stability using alkaline electrolysis plants Proceedings of the Institution of Mechanical Engineers Part A Journal of Power and Energy, 227, (1), pp. 115-123. (doi:10.1177/0957650912466642).

Kihm, F., Ferguson, N.S. and Antoni, J. (2015) Fatigue life from kurtosis controlled excitations Procedia Engineering, pp. 1-16.

Kim, J.-H., Barlat, F., Pierron, F. and Lee, M.-G. (2014) Determination of anisotropic plastic constitutive parameters using the virtual fields method Experimental Mechanics, 54, (7), pp. 1189-1204. (doi:10.1007/s11340-014-9879-x).

Kim, J.-H., Serpantié, A., Barlat, F., Pierron, F. and Lee, M.-G. (2013) Characterization of the post-necking strain hardening behavior using the virtual fields method International Journal of Solids and Structures, 50, (24), pp. 3829-3842. (doi:10.1016/j.ijsolstr.2013.07.018).

Kim, J.T., Waters, T.P. and Nelson, P.A. (2002) Numerical modelling of vibration sources on hard disk drive by inverse methods At International conference on Structural Dynamics Modelling. 01 Jun 2002. , pp. 127-136.

Kim, S.M., Elliott, S.J. and Brennan, M.J. (2000) Decentralised velocity feedback control for multichannel active vibration isolation In Proceedings of UKACC International Conference on Control 2000, University of Cambridge. IEE., pp. 1-6.

Kim, Sang-Myeong, Elliott, S.J. and Brennan, M.J. (2001) Decentralized control for multichannel active vibration isolation IEEE Transactions on Control Systems Technology, 9, (1), pp. 93-100. (doi:10.1109/87.896750).

Kimiaeifar, A., Lund, E., Thomsen, O.T. and Sørensen, J.D. (2011) Application of the homotopy analysis method to determine the analytical limit state functions and reliability index for large deflection of a cantilever beam subjected to static co-planar loading Computers & Mathematics with Applications, 62, (12), pp. 4646-4655. (doi:10.1016/j.camwa.2011.10.050).

Kimiaeifar, A., Lund, E., Thomsen, O.T. and Sørensen, J.D. (2012) Asymptotic Sampling for reliability analysis of adhesive bonded stepped lap composite joints Engineering Structures, 49, pp. 655-663. (doi:10.1016/j.engstruct.2012.12.003).

Kimiaeifar, A., Toft, H., Lund, E., Thomsen, O.T. and Sørensen, J.D. (2012) Reliability analysis of adhesive bonded scarf joints Engineering Structures, 35, pp. 281-287. (doi:10.1016/j.engstruct.2011.11.013).

Kingan, Michael J. (2013) Open rotor broadband interaction noise [in special issue: Philip Doak Commemorative Issue] Journal of Sound and Vibration, 332, (17), pp. 3956-3970. (doi:10.1016/j.jsv.2013.03.014).

Kitazaki, Satoshi (1994) Modelling mechanical responses to human whole-body vibration University of Southampton, Institute of Sound and Vibration Research, Doctoral Thesis , 294pp.

Knight, Lucy A., Pal, Saikat, Coleman, John C., Bronson, Fred, Haider, Hani, Levine, Danny L., Taylor, Mark and Rullkoetter, Paul J. (2007) Comparison of long-term numerical and experimental total knee replacement wear during simulated gait loading Journal of Biomechanics, 40, (7), pp. 1550-1558. (doi:10.1016/j.jbiomech.2006.07.027).

Knychala, J. (2013) Tissue regeneration in porous structures for bone engineering applications University of Southampton, Engineering and the Environment, Doctoral Thesis , 192pp.

Kokaew, V., Sharkh, S.M. and Moshrefi-Torbati, M. (2014) A hybrid method for maximum power tracking of a small scale CAES system At 9th IEEE/IET International Symposium on Communication Systems, Networks & Digital Signal Processing, CSNDSP14, United Kingdom. 23 - 25 Jul 2014. 6 pp, pp. 61-66. (doi:10.1109/CSNDSP.2014.6923799).

Kokaew, V., Sharkh, S.M. and Moshrefi-Torbati, M. (2015) Maximum power point tracking of a small scale compressed air energy storage system IEEE Transactions on Industrial Electronics, 63, (2) (doi:10.1109/TIE.2015.2477344).

Kolachalama, V.B., Bressloff, N.W., Nair, P.B. and Shearman, C.P. (2005) A parametric study of the hemodynamic behavior in a one dimensional systemic elastic artery: Application to stent design At 12th International Conference on Biomedical Engineering. 07 - 10 Dec 2005.

Koroma, S.G., Hussein, M.F.M. and Owen, J.S. (2013) The effects of railpad nonlinearity on the vibration of railway tracks under harmonic load At 11th Biennial International Conference on Vibration Problems, Portugal. 09 - 12 Sep 2013.

Koroma, S.G., Hussein, M.F.M. and Owen, J.S. (2014) Vibration of a beam on continuous elastic foundation with nonhomogeneous stiffness and damping under a harmonically excited mass Journal of Sound and Vibration, 333, (9), 2571 - 2587. (doi:10.1016/j.jsv.2014.01.001).

Kota, V. and Wright, M.C.M. (2006) Wake generator control of inlet flow to cancel flow distortion noise Journal of Sound and Vibration, 295, (1-2), pp. 94-113. (doi:10.1016/j.jsv.2005.12.050).

Kovalyov, M.Y., Potts, C.N. and Strusevich, V.A. (2003) Batching decisions for assembly production systems European Journal of Operational Research, 157, (3), pp. 620-642. (doi:10.1016/S0377-2217(03)00250-9).

Krespi, Yosef P, Kizhner, Victor, Nistico, Laura, Hall-Stoodley, Luanne and Stoodley, Paul (2011) Laser disruption and killing of methicillin-resistant Staphylococcus aureus biofilms American Journal of Otolaryngology, 32, (3), pp. 198-202. (doi:10.1016/j.amjoto.2010.01.010). (PMID:20434806).

Ku, Emery M., Elliott, Stephen J. and Lineton, Ben (2008) Statistics of instabilities in a state space model of the human cochlea Journal of the Acoustical Society of America, 124, (2), pp. 1068-1079. (doi:10.1121/1.2939133).

Kubair, D.V. and Spearing, S.M. (2007) Cohesive zone model for direct silicon wafer bonding Journal of Physics D: Applied Physics, 40, (10), pp. 3070-3076. (doi:10.1088/0022-3727/40/10/010).

Kumar, A., Nair, P.B., Keane, A.J. and Shahpar, S. (2005) Probabilistic performance analysis of eroded compressor blades At PWR2005: ASME Power. 01 Apr 2005.

Kumar, Manoj, Shenoi, R.A. and Cox, S.J. (2009) Experimental validation of modal strain energies based damage identification method for a composite sandwich beam Composites Science and Technology, 69, (10), pp. 1635-1643. (doi:10.1016/j.compscitech.2009.03.019).

Kumar, S. and Scanlan, J.P. (2012) On axisymmetric adhesive joints with graded interface stiffness International Journal of Adhesion and Adhesives, 41, pp. 57-72. (doi:10.1016/j.ijadhadh.2012.09.001).

Kuo, K.A., Jones, S., Hussein, M.F.M. and Hunt, H.E.M. (2013) Recent developments in the pipe-in-pipe model for underground-railway vibration predictions At 11th International Workshop on Railway Noise (IWRN), Sweden. 09 - 13 Sep 2013.

König, C., Matziolis, G., Sharenkov, A., Taylor, W.R., Perka, C., Duda, G.N. and Heller, M.O. (2011) Collateral ligament length change patterns after joint line elevation may not explain midflexion instability following TKA Medical Engineering & Physics, 33, (10), pp. 1303-1308. (doi:10.1016/j.medengphy.2011.06.008). (PMID:21764353).

Lafronza, L., Song, W., McAlpine, A., Astley, R.J. and Keane, A.J. (2005) Liner optimization using a hybrid finite element method At 6th European Conference on Turbomachinery, Fluid Dynamics and Thermodynamics. 07 - 11 Mar 2005. , pp. 1085-1095.

Lai, H. and Luo, K.H. (1970) Large eddy simulation and control of cavity aeroacoustics At Conference on Turbulence and Interactions – TI2006. 29 May - 02 Jun 2006.

Lai, H. and Luo, K.H. (2007) A three-dimensional hybrid LES-acoustic analogy method for predicting open-cavity noise Applied Scientific Research, 79, (1), pp. 55-82. (doi:10.1007/s10494-006-9066-y).

Lai, H., Yan, Y. and Smith, J.M. (2002) A calculation procedure with multi-block iteration and moving mesh for heat and fluid flows in complex time-dependent geometries International Journal of Numerical Methods for Heat and Fluid Flow, 12, (2), pp. 106-125. (doi:10.1108/09615530210418285).

Lai, H. and Yan, Y.Y. (2001) The effect of choosing dependent variables and cell-face velocities on convergence of the SIMPLE algorithm using non-orthogonal grids International Journal of Numerical Methods for Heat and Fluid Flow, 11, (6), pp. 524-546. (doi:10.1108/EUM0000000005667).

Lai, Shu Hau (2006) Design optimisation of a slotless brushless permanent magnet DC motor with helically-wound laminations for underwater rim-driven thrusters University of Southampton, School of Engineering Sciences, Doctoral Thesis .

Laila, D.S. and Gruenbacher, E. (2009) Discrete-time nonlinear observer and output feedback design for a combustion engine test bench At 47th IEEE Conference on Decision and Control, Mexico. 09 - 11 Dec 2008. , pp. 5718-5723. (doi:10.1109/CDC.2008.4738943).

Laila, Dina Shona, Nesic, Dragan and Teel, Andrew (2002) Open and closed loop dissipation inequalities under sampling and controller emulation European Journal of Control, 8, (2), pp. 119-125. (doi:10.3166/ejc.8.109-125).

Lam, Bhan, Elliott, Stephen J. and Gan, Woon-Seng (2015) Regularisation of the equivalent source method for robust numerical modelling of acoustic scattering At 44th International Congress on Noise Control Engineering (inter.noise 2015), United States. 09 - 12 Aug 2015.

Lam, James, Shu, Zhan, Xu, Shengyuan and Boukas, E.K. (2007) Robust ?? control of descriptor discrete-time Markovian jump systems International Journal of Control, 80, (3), pp. 374-385. (doi:10.1080/00207170600999322).

Langdon, Terence G. (2013) Achieving superplasticity in ultrafine-grained metals Mechanics of Materials, 67, pp. 2-8. (doi:10.1016/j.mechmat.2013.06.005).

Laszlo, Helga E. and Griffin, Michael J. (2011) The transmission of vibration through gloves: effects of push force, vibration magnitude and inter-subject variability Ergonomics, 54, (5), pp. 488-496. (doi:10.1080/00140139.2011.562984).

Laurent, Christian, Palmer, Colin, Boardman, Richard P., Dyke, Gareth and Cook, Richard (2014) Nanomechanical properties of bird feather rachises: exploring naturally occurring fibre reinforced laminar composites Journal of The Royal Society Interface, 11, (101), p. 20140961. (doi:10.1098/rsif.2014.0961).

Laustsen, S., Lund, E., Kuhlmeier, L. and Thomsen, O.T. (2014) Failure behaviour of grid-scored foam cored composite sandwich panels for wind turbine blades subjected to realistic multiaxial loading conditions Journal of Sandwich Structures and Materials, 16, (5), pp. 481-510. (doi:10.1177/1099636214541367).

Laustsen, S., Lund, E., Kühlmeier, L. and Thomsen, O.T. (2013) Development of a high-fidelity experimental substructure test rig for grid-scored sandwich panels in wind turbine blades Strain, 50, (2), pp. 111-131. (doi:10.1111/str.12072).

Laustsen, S., Lund, E., Kühlmeier, L. and Thomsen, O.T. (2014) Interfibre failure characterisation of unidirectional and triax glass fibre non-crimp fabric reinforced epoxy laminates Applied Composite Materials, 22, (1), pp. 51-79. (doi:10.1007/s10443-014-9391-6).

Lazauskas, A., Baltrusaitis, J., Grigaliūnas, V., Baltušnikas, A., Abakevičienė, B. and Polcar, T. (2013) Tribological properties of the two-step thermally deposited chromium films Applied Surface Science, 283, pp. 1089-1095. (doi:10.1016/j.apsusc.2013.07.083).

Le Louëdec, G., Pierron, F., Sutton, M.A. and Reynolds, A.P. (2013) Identification of the local elasto-plastic behavior of FSW welds using the Virtual Fields Method Experimental Mechanics, 53, (5), pp. 849-859. (doi:10.1007/s11340-012-9679-0).

Le Louëdec, G., Pierron, F., Sutton, M.A., Siviour, C. and Reynolds, A.P. (2015) Identification of the dynamic properties of Al 5456 FSW welds using the virtual fields method Journal of Dynamic Behavior of Materials, 1, (2), pp. 176-190. (doi:10.1007/s40870-015-0014-6).

Lecomte, Christophe (2013) Exact statistics of systems with uncertainties: an analytical theory of rank-one stochastic dynamic systems Journal of Sound and Vibration, 332, (11), pp. 2750-2776. (doi:10.1016/j.jsv.2012.12.009).

Lecomte, Christophe (2013) A theory of multi-rank stochastic dynamic systems Probabilistic Engineering Mechanics

Lecomte, Christophe (2014) Time response of complex dynamic systems At ISMA 2014 International Conference on Noise and Vibration Engineering, Belgium. 15 - 17 Sep 2014.

Lecomte, Christophe, Graham, W.R. and Dale, M. (2010) A shell model for tyre belt vibrations Journal of Sound and Vibration, 329, (10), pp. 1717-1742. (doi:10.1016/j.jsv.2009.11.022).

Lee, I-Fang, Phan, Thien, Levine, Lyle E., Tischler, Jonathan Z., Geantil, Peter T., Huang, Yi, Langdon, Terence G. and Kassner, Michael E. (2013) Using X-ray microbeam diffraction to study the long-range internal stresses in aluminum processed by ECAP Acta Materialia, 61, pp. 7741-7748. (doi:10.1016/j.actamat.2013.09.013).

Lee, J., Kim, S., Heo, S-J. and Thompson, D.J. (2000) Vibration analysis of a coil spring by using dynamic stiffness method In Proceedings of the 10th Anniversary Conference of the KSNVE (Korean Society of Noise and Vibration Engineers),. Korean Society of Noise and Vibrtion Engineer., pp. 1933-1938.

Lee, Jeong Yu, Carugo, Dario, Crake, Calum, Owen, Joshua, de Saint Victor, Marie, Seth, Anjali, Coussios, Constantin and Stride, Eleanor (2015) Nanoparticle–loaded protein–polymer nanodroplets for improved stability and conversion efficiency in ultrasound imaging and drug delivery Advanced Materials, 27, (37), pp. 5484-5492. (doi:10.1002/adma.201502022). (PMID:26265592).

Lee, M., Pine, T and Jones, T.B. (2000) Automative box section design under torsion II- behabiour and implication on weight reduction Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 214, (D5), pp. 473-485.

Lee, S., Utsunomiya, A., Akamatsu, H., Neishi, K., Furukawa, M., Horita, Z. and Langdon, T.G. (2002) Influence of scandium and zirconium on grain stability and superplastic ductilities in ultrafine-arained Al-Mg alloys Acta Materialia, 50, (3), pp. 553-564. (doi:10.1016/S1359-6454(01)00368-8).

Lee, Sang-Joon and Lim, Hee-Chang (2001) A numerical study on flow around a triangular prism located behind a porous fence Fluid Dynamics Research, 28, (3), pp. 209-221. (doi:10.1016/S0169-5983(00)00030-7).

Lee, Sang-Joon, Lim, Hee-Chang, Han, Manhee and Lee, Seung S. (2005) Flow control of circular cylinder with a V-grooved micro-riblet film Fluid Dynamics Research, 37, (4), pp. 246-266. (doi:10.1016/j.fluiddyn.2005.05.002).

Lee, Y.-S. and Elliott, S.J. (2001) Active position control of a flexible smart beam using internal model control Journal of Sound and Vibration, 242, (5), pp. 767-791. (doi:10.1006/jsvi.2000.3379).

Lembessis, E., Dulieu-Barton, J.M. and Shenoi, R.A. (2007) Assessment of hygrothermal ageing and damage in sandwich foam using TSA At 13th International Conference on Experimental Mechanics (ICEM 13). 01 - 06 Jul 2007. 8 pp.

Lennard, F.J., Eastop, D.D., Dulieu-Barton, J.M., Chambers, A.R. and Khennouf, D. (2008) Progress in strain monitoring of tapestries At ICOM-CC 2008: International Council of Museums Committee For Conservation: Diversity in Heritage Conservation. Tradition, Innovation and Participation. 22 - 26 Sep 2008. , pp. 843-848.

Leong, M., Overgaard, L.C.T., Daniel, I.M., Lund, E. and Thomsen, O.T. (2012) Interlaminar/interfiber failure of unidirectional glass fiber reinforced composites used for wind turbine blades Journal of Composite Materials, 47, (3), pp. 363-368. (doi:10.1177/0021998312440132).

Leung, S-Y, Browne, M. and New, A.M.R. (2007) Smooth surface micro finite element modelling of a cancellous bone analogue material Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine

Leung, S-Y., Browne, M. and New, A.M.R. (2007) Smooth surface micro finite element modelling of a cancellous bone analogue material At European Society of Biomechanics Workshop 2007: Finite Element Modelling in Biomechanics and Mechanobiology. 26 - 28 Aug 2007.

Levita, G., Cavaleiro, A., Molinari, E., Polcar, T. and Righi, M.C. (2014) Sliding properties of MoS2 layers: load and interlayer orientation effects The Journal of Physical Chemistry C, 118, (25), pp. 13809-13816. (doi:10.1021/jp4098099).

Lewis, C.H. (2001) An adaptive electro-mechanical model for simulating the driving point force response of the human body with different input motions At 36th UK Group Conference on Human Response to Vibration. 12 - 14 Sep 2001. , pp. 307-321.

Lewis, S.G., Hudson, D.A., Turnock, S.R., Blake, J.I.R and Shenoi, R.A. (2007) A comparison of experimental measurements of high-speed RIB motions with non-linear strip theory Australian Journal of Mechanical Engineering, 4, (2), pp. 165-182.

Leyva-Mendivil, Maria F., Page, Anton and Bressloff, Neil W. (2015) A mechanistic insight into the mechanical role of the stratum corneum during stretching and compression of the skin Journal of the Mechanical Behavior of Biomedical Materials, 49, pp. 197-219. (doi:10.1016/j.jmbbm.2015.05.010).

Li, Jianwei, Wongsa-Ngam, Jittraporn, Xu, Jie, Shan, Debin, Guo, Bin and Langdon, Terence G. (2014) Wear resistance of an ultrafine-grained Cu-Zr alloy processed by equal-channel angular pressing Wear, 326-327, pp. 10-19. (doi:10.1016/j.wear.2014.12.022).

Li, W.Z., Liu, W.H., Evaristo, M, Polcar, T. and Cavaleiro, A (2013) Influence of Al content on the mechanical properties and thermal stability in protective and oxidation atmospheres of Zr-Cr-Al-N coatings Surface and Coatings Technology, 236, pp. 239-245. (doi:10.1016/j.surfcoat.2013.09.052).

Li, W.Z., Polcar, T., Evaristo, M. and Cavaleiro, A. (2013) High temperature properties of the Cr-Nb-Al-N coatings with increasing Al contents Surface and Coatings Technology, 228, pp. 187-194. (doi:10.1016/j.surfcoat.2013.04.027).

Lifton, J.J., Malcolm, A.A. and McBride, J.W. (2014) On the uncertainty of surface determination in x-ray computed tomography for dimensional metrology Measurement Science and Technology, 26, (3), pp. 1-8. (doi:10.1088/0957-0233/26/3/035003).

Lifton, Joseph J. (2015) The influence of scatter and beam hardening in X-ray computed tomography for dimensional metrology University of Southampton, Engineering and the Environment, Doctoral Thesis , 229pp.

Lifton, Joseph J., Malcolm, Andrew A. and Mcbride, John W. (2014) A simulation-based study on the influence of beam hardening in x-ray computed tomography for dimensional metrology Journal of X-Ray Science and Technology, 23, (1), pp. 62-82. (doi:10.3233/XST-140471).

Lignell, D.O., Chen, J.H. and Richardson, E.S. (2008) Terascale direct numerical simulations of turbulent combustion – fundamental understanding towards predictive models Journal of Physics: Conference Series, 125, (1), pp. 1-10. (doi:10.1088/1742-6596/125/1/012031).

Limbert, Georges, Omar, Rodaina, Krynauw, Hugo, Bezuidenhout, Deon and Franz, Thomas (2016) The anisotropic mechanical behaviour of electro-spun biodegradable polymer scaffolds: Experimental characterisation and constitutive formulation Journal of the Mechanical Behavior of Biomedical Materials, 53, pp. 21-39. (doi:10.1016/j.jmbbm.2015.07.014). (PMID:26301317).

Lin, Jiewei and Qiu, Yi (2015) Sensitivity analysis of a lightweight rear differential unit on ride comfort of a sport utility vehicle At 50th United Kingdom Conference on Human Responses to Vibration, United Kingdom. 09 - 10 Sep 2015. 12 pp.

Lin, S-J., Matthys, D.R., Quinn, S., Davidson, J.P., Boyce, B.R. and Rowlands, R.E. (2007) Determining individual stresses around a near-edge hole in a plate subjected to an offset load using thermoelasticity At 13th International Conference on Experimental Mechanics (ICEM 07). 01 - 06 Jul 2007. 8 pp.

Lin, S-J., Quinn, S., Matthys, D.R., Kincaid, I.M., Boyce, B.R. and Rowlands, R.E. (2007) Combining thermoelastic and stress function to evaluate individual stresses around a near-edge hole At 13th International Conference on Experimental Mechanics (ICEM 07). 01 - 06 Jul 2007. 8 pp.

Lincoln, N.K. and Veres, S.M. (2006) Componenets of a vision assisted constrained autonomous satellite formation flying control system International Journal of Adaptive Control and Signal Processing, 21, (2-3), pp. 237-264. (doi:10.1002/acs.922).

Lindsell, C.J. and Griffin, M.J. (2000) Normative data for standardised diagnostic tests of the vascular and neurological effects of the hand-transmitted vibration At International Workshop: Diagnosis of Injuries Caused by Hand-transmitted Vibration. 11 - 13 Sep 2000. , pp. 27-28.

Lindsell, C.J. and Griffin, M.J. (2000) A standardised test battery for assessing vascular and neurological components of the hand-arm vibration syndrome At Proceedings of the 8th International Conference on Hand-Arm Vibration. 09 - 12 Jun 1998. , pp. 133-141.

Lindsell, Christopher John (1999) The measurement of vascular and neurological function in workers exposed to hand-transmitted vibration University of Southampton, Institute of Sound and Vibration Research, Doctoral Thesis , 271pp.

Lingard, William (2013) Sounds perfect: the evolution of recording technology and music's social future University of Southampton, Faculty of Humanities, Doctoral Thesis , 374pp.

Linton, Nicholas Paul (2013) Field trials and development of a hydrostatic pressure machine University of Southampton, Engineering and the Environment, Doctoral Thesis , 360pp.

Liu, Chi, Qiu, Yi and Griffin, Michael (2015) Role of thighs in the biodynamic response of the human body sitting on a rigid seat exposed to vertical vibration At 50th United Kingdom Conference on Human Responses to Vibration, United Kingdom. 09 - 10 Sep 2015. 9 pp.

Liu, Chi, Qiu, Yi and Griffin, Michael J. (2014) Finite element modelling of human-seat interactions: vertical in-line and fore-and-aft cross-axis apparent mass when sitting on a rigid seat without backrest and exposed to vertical vibration [in special issue: Whole-Body Vibration Injuries] Ergonomics, 58, (7), pp. 1207-1219. (doi:10.1080/00140139.2015.1005164).

Liu, Y.Y., Waters, T.P., Brennan, M.J. and Mace, B.R. (2002) Harmonic analysis of semi-active dampers University of Southampton 92pp. , Southampton, UK (ISVR Technical Memorandum, 900).

Liu, Yu, Wang, Zhi-Wu, Liu, Yong-Qiang, Qin, Lei and Tay, Joo-Hwa (2005) A generalized model for settling velocity of aerobic granular sludge Biotechnology Progress, 21, (2), pp. 621-626. (doi:10.1021/bp049674u).

Lobb, B. (2001) A frequency weighting for motion sickness susceptibility in the lateral axis At 36th UK Group Conference on Human Response to Vibration. 12 - 14 Sep 2001. , pp. 386-398.

Luo, J.K., Huang, R., He, J.H., Fu, Y.Q., Flewitt, A.J., Spearing, S.M., Fleck, N.A. and Milne, W.I. (2006) Modelling and fabrication of low operation temperature microcages with a polymer/metal/DLC trilayer structure Sensors and Actuators A: Physical, 132, (1), pp. 346-353. (doi:10.1016/j.sna.2006.03.004).

Luo, Jian and Veres, Sandor M. (2008) MIMO frequency domain iterative tuning for tracking control At 17th World Congress of International Federation of Automatic Control. 06 - 11 Jul 2008. 8 pp, pp. 451-456. (doi:10.3182/20080706-5-KR-1001.3807).

Luo, Jian and Veres, Sandor M. (2008) Frequency domain iterative tuning for the control of nonlinear vibrations At 47th IEEE Conference on Decision and Control, Mexico. 09 - 11 Dec 2008. 6 pp, pp. 3014-3019. (doi:10.1109/CDC.2008.4739397).

Luo, Jian and Veres, Sandor M. (2010) Frequency domain iterative feedforward/feedback tuning for MIMO ANVC Automatica, 46, (4), pp. 735-742. (doi:10.1016/j.automatica.2010.01.025).

Luo, K.H. and Lai, H., (2006) A hybrid LES-acoustic analogy method for computational aeroacoustics Lamballais, Eric, Friedrich, Rainer, Geurts, Bernard J. and Métais, Olivier (eds.) In Direct and Large-Eddy Simulation VI. Springer. 8 pp, pp. 537-544. (doi:10.1007/978-1-4020-5152-2_62).

Luo, K.H., Xia, J. and Monaco, E. (2009) Multiscale modelling of multiphase flow with complex interactions Journal of Multiscale Modelling, 1, (1), pp. 125-156. (doi:10.1142/S1756973709000074).

Luo, Zhiqiang and Chen, Zhi-Min (2013) Numerical simulation of standing wave with 3D predictor-corrector finite difference method for potential flow equations Applied Mathematics and Mechanics, 34, (8), pp. 931-944. (doi:10.1007/s10483-013-1718-7).

MSRao, Parlapalli, Dromaint, Sylvain, Shu, Dongwei and Della, Christian N. (2004) Buckling analysis of tri-layer beams with multiple separated delaminations Composite Structures, 66, (1-4), pp. 53-60. (doi:10.1016/j.compstruct.2004.04.021).

Ma, C., Wang, S.C. and Walsh, F.C. (2015) Electrodeposition of nanocrystalline nickel–cobalt binary alloy coatings: a review Transactions of the Institute of Metal Finishing, 93, (2), pp. 104-112. (doi:10.1179/0020296714Z.000000000218).

Ma, C., Wang, S.C., Wang, L.P., Walsh, F.C. and Wood, R.J.K. (2013) The role of a tribofilm and wear debris in the tribological behaviour of nanocrystalline Ni–Co electrodeposits [in special issue: 4th UK-China Tribology] Wear, 306, (1-2), pp. 296-303. (doi:10.1016/j.wear.2013.01.121).

Ma, Sai, Li, Shunming and Xiong, Yeping (2015) Uncertainty extraction based multi-fault diagnosis of rotating machinery Journal of Vibroengineering, 18, (1), pp. 139-150.

Ma, Xianglong, Jin, Guoyong, Xiong, Yeping and Liu, Zhigang (2014) Free and forced vibration analysis of coupled conical–cylindrical shells with arbitrary boundary conditions International Journal of Mechanical Sciences, 88, pp. 122-137. (doi:10.1016/j.ijmecsci.2014.08.002).

Macdonald, A.S., Loudon, D., Rowe, P.J., Samuel, D., Hood, V., Nicol, A.C., Grealy, M.A. and Conway, B.A. (2007) Towards a design tool for visualizing the functional demand placed on older adults by everyday living tasks Universal Access in the Information Society (UAIS), 6, (2), pp. 137-144. (doi:10.1007/s10209-007-0078-8).

Mace, B.R. (2000) Mid-freqency vibration analysis and application to a two-rod system In Structural dynamics: recent advances, Vol. 1 (Proceedings of the 7th International Conference on Recent Advances in Structural Dynamics, Southampton). University of Southampton..

Mace, B.R. (2000) Estimation of frequency response statistics in structures with uncertain parameters In, ISMA2002: International Conference on Noise and Vibration Engineering, Leuven, Belgium, 16-18 September 2002. Leuven, Belgium, K.U.Leuven Department of Mechanical Engineering, PMA 8pp..

Mace, B.R. and Halkyard, C.R. (2000) Time domain estimation of response and intensity in beams using wave decomposition and reconstruction Journal of Sound and Vibration, 230, (3), pp. 561-589. (doi:10.1006/jsvi.1999.2630).

Mace, B.R. and Halkyard, C.R. (2000) Adaptative active control of flexural vibrations using wave amplitude estimators At ISMA2000: International Conference on Noise and Vibration Engineering. 16 - 18 Sep 2000. 8 pp.

Mace, B.R., Rustighi, E., Ferguson, N.S. and Doherty, D. (2009) Active control of flexural vibration: an adaptive anechoic termination In, Ulbrich, Heinz and Ginzinger, Lucas (eds.) Motion and Vibration Control, Selected Papers from MOVIC 2008. Dordrecht, NL, Springer pp. 231-240. (doi:10.1007/978-1-4020-9438-5_23).

Mace, B.R. and Shorter, P.J. (2000) Energy flow models from finite element analysis Journal of Sound and Vibration, 233, (3), pp. 369-389. (doi:10.1006/jsvi.1999.2812).

Mace, Brian R. and Manconi, Elisabetta (2008) Modelling wave propagation in two-dimensional structures using finite element analysis Journal of Sound and Vibration, 318, (4-5), pp. 884-902. (doi:10.1016/j.jsv.2008.04.039).

Machado, R., Luo, K.H. and Qin, R. (2006) Three-dimensional Lattice Boltzmann simulation of micro-reaction in porous media At First Colloquium on Micro and Nanoscale Flows – Advancing the Engineering Science and Design. 07 - 08 Dec 2006. 2 pp.

Maertens, A.P. and Weymouth, G.D. (2014) Accurate Cartesian-grid simulations of near-body flows at intermediate Reynolds numbers Computer Methods in Applied Mechanics and Engineering, 283, pp. 106-129. (doi:10.1016/j.cma.2014.09.007).

Mahon, Stephen and Zhang, Xin (2005) Computational analysis of pressure and wake characteristics of an aerofoil in ground effect Journal of Fluids Engineering, 127, (2), pp. 290-298. (doi:10.1115/1.1891152).

Makrodimopoulos, Athanasios (2006) Computational formulation of shakedown analysis as a conic quadratic optimization problem Mechanics Research Communications, 33, (1), pp. 72-83. (doi:10.1016/j.mechrescom.2004.10.014).

Maneepan, K., Shenoi, R.A., Blake, J.I.R. and Jeong, H.K. (2007) Genetic algorithms (GAs) based optimisation of FRP composite plated grillages in ship structures The Transactions of the Royal Institution of Naval Architects Part A: International Journal of Maritime Engineering, 149, (Part A3), pp. 1-19.

Manninen, N.K., Ribeiro, F., Escudeiro, A., Polcar, T., Carvalho, S. and Cavaleiro, A. (2013) Influence of Ag content on mechanical and tribological behavior of DLC coatings Surface and Coatings Technology, 232, pp. 440-446. (doi:10.1016/j.surfcoat.2013.05.048).

Mansfield, N.J. and Griffin, M.J. (2000) Non-linearities in apparent mass and transmissibility during exposure to whole-body vertical vibration Journal of Biomechanics, 33, (8), pp. 933-941. (doi:10.1016/S0021-9290(00)00052-X).

Mansfield, N.J. and Griffin, M.J. (2000) Effect of posture and vibration magnitude on apparent mass and pelvis rotation during exposure to whole-body vertical vibration At 2nd International Conference on Whole-Body Vibration Injuries. 07 - 09 Nov 2000. , pp. 43-44.

Manuyakorn, W., Katsamenis, O., Li, T., Thurner, P., Davies, D. and Howarth, P. (2011) The structure and cross-linking of collagen in asthma At conference; 2011-06-10. , p. 89. (doi:10.1111/j.1398-9995.2011.02604.x).

Massaro, M., Lot, R. and Cossalter, V. (2011) On engine-to-slip modelling for motorcycle traction control design Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 225, (1), pp. 15-27. (doi:10.1243/09544070JAUTO1575).

Matsumoto, Y. and Griffin, M.J. (2001) Modelling the dynamic mechanisms associated with the principal resonance of the seated human body Clinical Biomechanics, 16, (Supplement 1), S31-S44. (doi:10.1016/S0268-0033(00)00099-1).

Maul, C., McBride, J.W. and Swingler, J. (2000) On the nature of intermittences in electrical contacts At Proceedings of the 20th International Conference on Electrical Contacts. 19 - 23 Jun 2000. , pp. 23-28.

Mavrogordato, Mark N., Taylor, Mark, Taylor, Andrew and Browne, Martin (1970) Combined non-destructive-evaluation of cement shrinkage effects in a total hip replacement model At 54th Annual Meeting of the Orthopaedic Research Society. 02 - 05 Mar 2008. 1 pp, p. 1832.

McAlpine, A., Powles, C.J. and Tester, B.J. (2013) A weak-scattering model for turbine-tone haystacking Journal of Sound and Vibration, 332, (16), pp. 3806-3831. (doi:10.1016/j.jsv.2013.02.023).

McBride, J.W. (1997) High speed imaging of plasmas in low voltage systems In IEE Colloquium on Measurement and Plasmas (Digest No: 1997/088). Institute of Electrical and Electronics Engineers., pp. 1-3.

McBride, J.W. (2006) The loaded surface profile: a new technique for the investigation of contact surfaces At 23rd International Conference on Electrical Contacts, together with International Session on Electro-Mechanical Devices 2006. 06 - 09 Jun 2006. , pp. 150-156.

McBride, J.W., Cross, K.J and Zhao, Z. (2008) An experimental investigation of the contact area between a glass plane and both metallic and carbon- nano-tube electrical contacts At Holm 2008 - 54th IEEE Holm Conference on Electrical Contacts. 27 - 29 Oct 2008. , pp. 325-331.

McBride, J.W. and Cross, K.J. (2008) The evaluation of wear in the fretting of electrical contact surfaces At Fretting Fatigue and Wear - Real-Life Solutions. 23 Sep 2008. 4 pp.

McBride, J.W., Hill, M. and Jung, M., (1997) The analysis of the form of aspheric lens surfaces Ford, D.G. and Postlethwaite, S.R. (eds.) In Laser Metrology & Machine Performance III. Computational Mechanics., pp. 381-392.

McBride, J.W., Hill, M. and Zhang, D. (2004) A feature extraction method for the assessment of the form parameters of surfaces with localised erosion Wear, 256, (3-4), pp. 243-251. (doi:10.1016/S0043-1648(03)00411-3).

McBride, J.W. and Jeffery, P.A. (1999) Anode and cathode arc root movement during contact opening at high current IEEE Transactions on Components and Packaging Technologies, 22, (1), pp. 38-46. (doi:10.1109/6144.759351).

McBride, J.W., Jeffery, P.A. and Weaver, P.M. (2002) Electrode processes and arc form in miniature circuit breakers In Proceedings of the Forty-Fourth IEEE Holm Conference on Electrical Contacts, 1998. Institute of Electrical and Electronics Engineers., pp. 93-99. (doi:10.1109/HOLM.1998.722433).

McBride, J.W. and Weaver, P.M. (2001) Review of arcing phenomena in low voltage current limiting circuitbreakers IEE Proceedings: Science, Measurement & Technology, 148, (1), pp. 1-7. (doi:10.1049/ip-smt:20010185).

McBride, J.W., Yunus, E.M. and Spearing, S.M. (2009) Gold coated carbon nanotube surfaces as low force electrical contacts for MEMS devices: part 1 At 55th IEEE Holm Conference on Electrical Contacts. 14 - 16 Sep 2009. 7 pp, pp. 278-284.

McBride, J.W., Zhao, Z. and Boltryk, P.J. (2009) A comparison of optical sensing methods for the high precision 3D surface profile measurement of grooved surfaces At EUSPEN Special Interest Group Meeting: Structured and Freeform Surfaces. 24 - 25 Feb 2009. 46 pp.

McBride, John W., Liu, Hong, Chianrabutra, Chamaporn and Lewis, Adam P. (2014) Investigation of the current on the wear area of Au/Cr-Au/MWCNT contact pair At 14th International Session on Electro-Mechanical Devices (IS-EMD2014), Japan. 29 - 30 Nov 2014. 6 pp.

McMillan, A.J. and Keane, A.J. (1996) Shifting resonances from a frequency band by applying concentrated masses to a thin rectangular plate Journal of Sound and Vibration, 192, (2), pp. 549-652. (doi:10.1006/jsvi.1996.0203).

McMillan, A.J. and Keane, A.J. (1997) Vibration isolation in a thin rectangular plate using a large number of optimally positioned point masses Journal of Sound and Vibration, 202, (2), pp. 219-234. (doi:10.1006/jsvi.1996.0861).

McMillan, A.J. and Keane, A.J., (1997) Design for vibration characteristics Gilchrist, M.D. (ed.) In Proceedings of the 3rd International Conference on Modern Practice in Stress and Vibration Analysis. Balkema., pp. 317-324.

Mellor, B.G. (2006) Welding surface treatment methods for protection against wear In, Mellor, B.G. (eds.) Surface Coatings for Protection against Wear. Cambridge, UK, Woodhead Publishing Limited pp. 302-391.

Mendoza, J.L., Granados, M.R., de Godos, I., Acién, F.G., Molina, E., Banks, C. and Heaven, S. (2013) Fluid-dynamic characterization of real-scale raceway reactors for microalgae production Biomass and Bioenergy, 54, pp. 267-275. (doi:10.1016/j.biombioe.2013.03.017).

Menzies, Dylan (2011) Horizontal sound field reproduction with point cources using distributed constraints At International Conference on Spatial Audio, Germany. 10 - 13 Apr 2011. 9 pp.

Miller, M.D., Reed, P.A.S., Joyce, M.R., Henderson, M.B., Brooks, J.W., Wilcock, I. and Wu, X. (2007) Effect of environment on notch fatigue resistance of CMSX4 Materials Science and Technology, 23, (12), pp. 1439-1445. (doi:10.1179/174328407X213198).

Misra, S.K., Nazhat, S.N., Valappil, S.P., Moshrefi-Torbati, M., Wood, R.J.K., Roy, I. and Boccaccini, A.R., Moshrefi-Torbati, M.(ed.) (2007) Fabrication and characterization of biodegradable poly(3-hydroxybutyrate) composite containing bioglass Biomacromolecules, 8, (7), 2112 -2119. (doi:10.1021/bm0701954).

Mitin, V.F., McDonald, P.C., Pavese, F., Boltovets, N.S., Kholevchuk, V.V., Nemish, I.Yu., Basanets, V.V., Dugaev, V.K., Sorokin, P.V., Venger, E.F. and Mitin, E.V., (2005) New temperature and magnetic field sensors for cryogenic applications developed under a European Project Zhang, L., Lin, L. and Chen, G. (eds.) In Proceedings of the Twentieth International Cryogenic Engineering Conference (ICEC20). Elsevier..

Moclus, M.A., Zheng, S.J., Mayeur, J.R., Beyerlein, I.J., Mara, N.A., Polcar, T., Llorca, J and Molina-Aldareguía, J.M. (2013) Optimum high temperature strength of two-dimensional nanocomposites APL Materials, 1, (5), pp. 1-7. (doi:10.1063/1.4828757).

Moffat, A.J., Barnes, S., Mellor, B.G. and Reed, P.A.S. (2005) The effect of silicon content on long crack fatigue behaviour of aluminium–silicon piston alloys at elevated temperature. (In special issue: Fatigue Damage of Structural Materials V) International Journal of Fatigue, 27, (10-12), pp. 1564-1570. (doi:10.1016/j.ijfatigue.2005.06.023).

Moffat, A.J., Barnes, S., Mellor, B.G. and Reed, P.A.S. (2005) The effect of silicon content on long crack fatigue behaviour of aluminium-silicon piston alloy at elevated temperatures International Journal of Fatigue, 27, (10-12), pp. 1564-1570. (doi:10.1016/j.ijfatigue.2005.06.023).

Mohammad, M.T.N., Booth, C.N., Hodgson, P., Howlett, L., Smith, P.J. and Sharkh, S.M. (1970) Design considerations and performance of a PM linear actuator in a radiation environment At The 4th International Conference on Power Electronics, Machines and Drives PEMD. 02 - 04 Apr 2008. 5 pp, pp. 757-761.

Mohan, P. Surya, Nair, Prasanth B. and Keane, Andy J. (2009) Uncertainty in thermal analysis of gas turbine blades At 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference. 04 - 07 May 2009. 13 pp.

Molland, A.F., Turnock, S. R. and Hudson, D.A. (2011) Ship resistance and propulsion: practical estimation of ship propulsive power, Cambridge, GB, Cambridge University Press, 544pp.

Molland, A.F. and Turnock, S.R. (2002) A propeller thrust and torque dynamometer for wind tunnel models Strain, An International Journal for Experimental Mechanics, 38, (1), pp. 3-10. (doi:10.1046/j.0039-2103.2002.00001.x).

Monaco, E., Luo, K.H. and Qin, R. (2006) Optimizing the obstacles layout in a T-shaped micromixer by using the Lattice Boltzmann method At First Colloquium on Micro and Nanoscale Flows – Advancing the Engineering Science and Design. 07 - 08 Dec 2006. 2 pp.

Monaco, E., Luo, K.H. and Qin, R.S. (2007) Lattice Boltzmann simulation of carbon dioxide multiphase flow in microchannels At 4th International Conference for Mesoscopic Methods in Engineering and Science. 16 - 20 Jul 2007.

Monaco, E., Luo, K.H. and Qin, R.S. (2007) Lattice Boltzmann simulation for microfluidics In New Trends in Fluid Mechanics Research. Tsinghua University Press and Springer. 745 pp, pp. 654-657.

Moore, N., Wilson, P.A. and Peters, A.J. (2002) An investigation into wing in ground effect airfoil geometry At RTO SCI Symposium on Challenges in Dynamics, System Identification, Control and Handling Qualities for Land, Air, Sea and Space Vehicles. 13 - 15 May 2002. , p. 24.

Morice, Colin and Veres, Sandor (2009) Geometric bounding techniques for underwater navigation At SYSID 2009, IFAC Symposium on System Identification and Parameter Estimation. 06 - 08 Jul 2009. , pp. 1-6.

Morioka, M. and Griffin, M.J. (2000) Dependence of vibrotactile thresholds on the psychophysical method At International Workshop: Diagnosis of Injuries Caused by Hand-transmitted Vibration. , pp. 33-34.

Morioka, M. and Griffin, M.J. (2004) Magnitude dependence of equivalent comfort contours for vertical hand-transmitted vibration At 10th International Conference on Hand-Arm Vibration. 07 - 11 Jun 2004. 2 pp.

Morioka, Miyuki (2008) Discomfort caused by multiple-input vibration at the hands, the seat and the feet In Proceedings of the 43rd UK Conference on Human Response to Vibration. Caterpillar., pp. 225-233.

Morioka, Miyuki and Griffin, Michael J. (2008) Absolute thresholds for the perception of fore-and-aft, lateral and vertical vibration at the hand, the seat and the foot Journal of Sound and Vibration, 314, (1-2), pp. 357-370. (doi:10.1016/j.jsv.2007.12.036).

Morris, S., Wood, R.J.K., Harvey, T.J. and Powrie, H.E. (2000) Electrostatic sensor calibration for the detection of charge generated by wear debris formation in oil lubricated contacts At Sixth Postgraduate conference in Engineering Materials. 06 Oct 2000.

Morris, S., Wood, R.J.K., Harvey, T.J. and Powrie, H.E.G. (2002) Use of electrostatic charge monitoring for early detection of adhesive wear in oil lubricated contacts Journal of Tribology: Transactions of the ASME, 124, (2), pp. 288-296. (doi:10.1115/1.1398293).

Moshrefi-Torbati, M. (2006) Nanoindentation testing of biodegradabale polymers At Measurement of the Mechanical Properties of Surfaces by Indentation, United Kingdom. 09 May 2006.

Moshrefi-Torbati, M., Forrester, J.A., Forrester, A.I.J., Keane, A.J., Brennan, M.J. and Elliott, S.J. (2012) Novel active and passive anti-vibration mountings International Journal of Solids and Structures, 331, (7), pp. 1532-1541. (doi:10.1016/j.jsv.2011.12.005).

Moshrefi-Torbati, M., Keane, A.J., Elliott, S.J., Brennan, M.J. and Rogers, E. (2000) The integration of advanced active and passive structural vibration control At Proceedings of the First International Conference on Vibration Engineering and Technology of Machinery (VETOMAC-I), India. 25 - 27 Oct 2000. 6 pp.

Mottershead, John, Ghandchi Tehrani, Maryam and Ram, Y.M (2009) An introduction to the receptance method in active vibration control At International Modal Analysis Conference (IMAC), United States. 09 - 12 Feb 2009.

Mottershead, John, Ghandchi Tehrani, Maryam and Samin, R. (2011) Active vibration suppression by the receptance method: partial pole placement, robustness and experiments Springer Proceedings in Physics, 139, (6), pp. 371-377. (doi:10.1007/978-94-007-2069-5_50).

Moulart, Raphaël, Avril, Stéphane and Pierron, Fabrice (2005) Identification of the through-thickness rigidities of a thick laminated composite tube Composites Part A Applied Science and Manufacturing, 37, (2), pp. 326-336. (doi:10.1016/j.compositesa.2005.05.050).

Muggleton, J.M., Brennan, M.J. and Pinnington, R.J. (2000) Wavenumber prediction of waves in buried plastic pipes for water leak detection In ICSV7 : Proceedings of the Seventh International Congress on Sound and Vibration, Garmisch-Partenkirchen, Germany, July 4-7, 2000. International Institute of Acoustics and Vibration (IIAV)., pp. 985-992.

Mullix, James, Warner, Martin and Stokes, Maria (2012) Testing muscle tone and mechanical properties of rectus femoris and biceps femoris using a novel hand held MyotonPRO device: relative ratios and reliability Working Papers in Health Sciences, 1, (1), pp. 1-8.

Muresan, M.G., Cambell, A.C., Ondracka, P., Bursikova, V., Perina, V., Polcar, T., Reuter, S., Hammer, M.U., Valtr, M. and Zajickova, L. (2015) Protective double-layer coatings prepared by plasma enhanced chemical vapor deposition on tool steel Surface and Coatings Technology, 272, pp. 229-238. (doi:10.1016/j.surfcoat.2015.04.002).

Mutafov, P., Evaristo, M., Cavaleiro, A. and Polcar, T. (2015) Structure, mechanical and tribological properties of self-lubricant W–S–N coatings Surface and Coatings Technology, 261, pp. 7-14. (doi:10.1016/j.surfcoat.2014.11.074).

Mutafov, P., Lanigan, J., Neville, A., Cavaleiro, A. and Polcar, T. (2014) DLC-W coatings tested in combustion engine - frictional and wear analysis Surface and Coatings Technology, 260, pp. 284-289. (doi:10.1016/j.surfcoat.2014.06.072).

Mwanza, M.C., Liu, J. and Reed, P.A.S. (2001) Microstructural characterisation of fatigue in novel plain bearing alloys At Proceedings of the Seventh Postgraduate Conference in Engineering Materials. 01 Jan 2001. , pp. 11-12.

Mylona, K., Macharia, H. and Goos, P. (2012) Three-level equivalent-estimation split-plot designs based on subset and supplementary difference set designs [in special issue: Quality & Reliability Engineering] IIE Transactions, 45, (11), pp. 1153-1165. (doi:10.1080/0740817X.2012.723841).

Nasuf, A., Bhaskar, A. and Keane, A.J. (2013) Grammatical evolution of shape and its application to structural shape optimisation Structural and Multidisciplinary Optimization, 48, (1), pp. 187-199. (doi:10.1007/s00158-013-0890-0).

Nawayseh, N. (2002) Modelling the vertical and fore-and-aft forces caused by whole-body vertical vibration At 37th United Kingdom Conference on Human Responses to Vibration. 18 - 20 Sep 2002. , pp. 302-321.

Nawayseh, N. and Griffin, M.J. (2004) Tri-axial forces at the seat and backrest during whole-body vertical vibration Journal of Sound and Vibration, 277, (1-2), pp. 309-326. (doi:10.1016/j.jsv.2003.09.048).

Nayak, A.K. and Shenoi, R.A. (2005) Finite element analysis of sandwich plates and shells In, Shenoi, R.A., Groves, A. and Rajapaske, Y.D.S. (eds.) Theory and Applications of Sandwich Structures. Southampton, UK, University of Southampton Press pp. 267-286.

Nayak, A.K., Shenoi, R.A. and Moy, S.S.J. (2002) Analysis of damped composite sandwich plates using plate bending elements with substitute shear strain fields based on Reddy's higher order theory Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 216, (5), pp. 591-606. (doi:10.1243/0954406021525377).

Nelson, Christopher Mark (1992) Vibration-induced white finger in dockyard employees University of Southampton, Institute of Sound and Vibration Research, Doctoral Thesis , 366pp.

Nelson, P.A. and Elliott, S.J. (1991) Active control of sound, Academic Press, 250pp.

Neodo, Stefano (2013) Electrochemical monitoring of nickel–aluminium bronze crevice corrosion solutions using boron–doped diamond electrode University of Southampton, Faculty of Engineering and the Environment, Doctoral Thesis , 207pp.

New, A.M.R., Taylor, M. and Wroblewski, B.M. (2005) Effect of hip stem taper on cement stresses Orthopedics, 28, (Supplement 8), s857-s862.

Newman, S. (2004) The safety of shipborne helicopter operation Measurement and Control, 37, (2), pp. 44-52.

Newman, S. (2005) Shipborne aviation: an introduction Journal of Aerospace Engineering, 219, (5), pp. 363-368. (doi:10.1243/095441005X30324).

Newman, S. (2006) Happiness is a consistent set of units? Measurement and Control, 39, (4), pp. 114-117.

Newman, S., Brown, R., Perry, J., Khelifa, M., Modha, A. and Arlin, G. (2004) Revisiting the effects of blade geometry on rotor behaviour in descending flight At 30th European Rotorcraft Forum. 01 Sep 2004.

Newman, S.J. (2001) The helicopter: how it flies At Ballantyne Symposium, Royal Aeronautical Society. 01 Jan 2001.

Newman, Simon (2001) The foundations of helicopter flight, Halsted Press

Newman, Simon, Whatley, David and Anderson, Ian (2003) Engineering design education - the integration of disciplines Aircraft Engineering and Aerospace Technology, 75, (1), pp. 18-26. (doi:10.1108/00022660310457257).

Newman, Simon J. (2009) Book review. Road to Mach 10: lessons learned from the X-43A flight research program Journal of Aerospace Engineering, 223, (3), p.307.

Ni, Guangjian, Elliott, S.J. and Langley, Andrew (2012) Dynamics and waves in loudspeaker cones At International Conference on Noise and Vibration Engineering 2012 (ISMA 2012), Belgium. 17 - 19 Sep 2012.

Ni, Guangjian, Elliott, S.J. and Mace, Brian R. (2013) Waves in a three-dimensional model of the cochlea At 11th International Conference on Recent Advances in Structural Dynamics, Italy. 01 - 03 Jul 2013.

Ni, Guangjian and Elliott, Stephen J. (2014) Prediction of mechanical effect due to a cochlear implant At The 51st inner Ear Biology Workshop, United Kingdom. 30 Aug - 02 Sep 2014.

Nicholls-Lee, R.F., Boyd, S.W. and Turnock, S.R. (2013) Application of bend-twist coupled blades for horizontal axis tidal turbines Renewable Energy, 50, pp. 541-550. (doi:10.1016/j.renene.2012.06.043).

Nicholls-Lee, Rachel and Turnock, Stephen R. (2007) Enhancing performance of a horizontal axis tidal turbine using adaptive blades In OCEANS 2007 - Europe. Institute of Electrical and Electronics Engineers. 6 pp, pp. 1-6. (doi:10.1109/OCEANSE.2007.4302437).

Nobakhti, S. and Aghdam, M.M. (2009) Static analysis of Reissner plate resting on two parameter elastic foundation with various boundary conditions At Proceedings of the 17th Annual International Conference on Mechanical Engineering (ISME), Iran, Islamic Republic of. 8 pp.

Nobakhti, S. and Aghdam, M.M. (2011) Static analysis of rectangular thick plates resting on two-parameter elastic boundary strips European Journal of Mechanics - A/Solids, 30, (3), pp. 442-448. (doi:10.1016/j.euromechsol.2010.12.016).

Nobakhti, Sabah, Katsamenis, Orestis L., Andriotis, Orestis G., Limbert, Georges and Thurner, Philipp J. (2013) Micromechanics of haversian bovine bone At 11th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering (CMBBE 2013), United States. 03 - 06 Apr 2013.

Nobakhti, Sabah, Limbert, Georges and Thurner, Philipp J. (2013) Cement lines and interlamellar areas in compact bone as strain amplifiers – contributors to elasticity, fracture toughness and mechanotransduction Journal of the Mechanical Behavior of Biomedical Materials, 29, pp. 235-251. (doi:10.1016/j.jmbbm.2013.09.011).

Noonan, Erin E, Peles, Yoav, Protz, Christopher S. and Spearing, Simon Mark (2008) The scaling of strength in the design of high-power MEMS structures Scripta Materialia, 59, (9), pp. 927-930. (doi:10.1016/j.scriptamat.2008.03.045).

Octavio de Alba Alvarez, Ricardo (2012) Vibration analysis of uncertain spot-welded structures University of Southampton, Faculty of Engineering and the Environment, Doctoral Thesis , 187pp.

Olivieri, Ferdinando, Shin, Mincheol, Fazi, Filippo M., Nelson, Philip A. and Otto, Peter (2013) Loudspeaker array processing for multi-zone audio reproduction based on analytical and measured electroacoustical transfer functions At AES 52nd International Conference: Sound Field Control - Engineering and Perception, United Kingdom. 02 - 04 Sep 2013.

Orivuori, Juha, Zazas, Ilias and Daley, Steve (2010) Active control of a frequency varying tonal disturbance by a nonlinear optimal controller with frequency tracking At PSYCO 2010: IFAC Workshop Periodic Control Systems, Turkey. 26 - 28 Aug 2010. , pp. 104-109.

Ottewill, James R., Neild, Simon A. and Wilson, R. Eddie (2009) Intermittent gear rattle due to interactions between forcing and manufacturing errors Journal of Sound and Vibration, 321, (3-5), pp. 913-935. (doi:10.1016/j.jsv.2008.09.050).

Ozturk, H., Bah, M.T., Nair, P.B. and Browne, M. (2010) Does the implant pivot position affect the outputs of probabilistic analyses of the cementless total hip replacement? At 6th World Congress on Biomechanics (WCB 2010), Singapore. 01 - 06 Aug 2010.

Paddan, G.S. and Griffin, M.J. (2000) Effect of push force on the transmission of shear vibration through gloves At 8th International Conference on Hand-Arm Vibration. 09 - 12 Jun 1998. , pp. 337-343.

Paddan, G.S. and Griffin, M.J. (2001) Measurement of glove and hand dynamics using knuckle vibration At 9th International Conference on Hand-Arm Vibration. 05 - 08 Jun 2001. 2 pp.

Pal, S., Laz, P.J., Knight, L.A., Coleman, J., Levine, D. and Rullkoetter, P. (2005) Probabilistic finite element modelling of TKR wear In 2005 Proceedings of the Summer Bioengineering Conference. American Society of Mechanical Engineers..

Palleti, H.N.K.T., Zhang, S., Dulieu-Barton, J.M., Fruehmann, R.K and Thomsen, O.T. (2015) Influence of thermomechanical interaction effects on the failure behaviour of polymer foam cored sandwich panels Journal of Sandwich Structures and Materials, 17, (3), pp. 308-331. (doi:10.1177/1099636214567602).

Palmer, K.T. (2007) Workers exposed to hand-transmitted vibration: health surveillance and fitness for work In, Palmer, Keith T., Brown, Ian and Hobson, John (eds.) Fitness for Work: the Medical Aspects. 4th Edition. Oxford, GB, Oxford University Press pp. 677-685.

Palmer, K.T., Coggon, D., Bendall, H., Griffin, M.J., Pannett, B. and Cooper, C. (2000) Raynaud's phenomenon and hand-transmitted vibration: a national survey Rheumatol, 39, p. 134.

Palmer, K.T., Coggon, D., Syddall, H. and Griffin, M.J. (2000) Occupational exposures to whole-body vibration in Great Britain and their relation to low back pain At 2nd International Conference on Whole-Body Vibration Injuries. 07 - 09 Nov 2000. , pp. 15-16.

Palmer, K.T., Griffin, M.J., Bendall, H.E., Pannett, B. and Coggon, D. (2000) Prevalence and pattern of occupational exposure to hand-transmitted vibration in Great Britain: findings from a national survey Occupational Environmental Medicine, 57, (4), pp. 218-228.

Palmer, K.T., Griffin, M.J., Syddall, H., Pannett, B., Cooper, C. and Coggon, D. (2000) Prevalence of Raynaud's phenomenon in Great Britain and its relation to hand-transmitted vibration: a national postal survey Occupational and Environmental Medicine, 57, (7), pp. 448-452.

Palmer, K.T., Griffin, M.J., Syddall, H.E., Pannett, B. and Coggon, D. (2001) Raynaud's phenomenon, vibration-induced white finger, and difficulties in hearing At EPIOCH 2001: Fifteenth Symposium in Epidemiology in Occupational Health Work and Health the Role of Epidemiology. 20 - 22 Aug 2001. 1 pp.

Palmer, Keith T., Haward, Barbara, Griffin, Michael J., Bendall, Holly and Coggon, David (2000) Validity of self reported occupational exposure to hand-transmitted and whole-body vibration Occupational Environmental Medicine, 57, (4), pp. 237-241. (doi:10.1136/oem.57.4.237).

Panananda, Nuttarut (2014) The effects of cubic damping on vibration isolation University of Southampton, Faculty of Engineering and the Environment, Doctoral Thesis , 250pp.

Pang, H.T. and Reed, P.A.S. (2000) Initiation and short crack growth in nickel base turbine disc alloys At Proceedings of 6th Postgraduate Conference in Engineering Materials. 06 Oct 2000. , pp. 29-30.

Pang, H.T. and Reed, P.A.S. (2003) Fatigue crack initiation and short crack growth in nickel-base turbine disc alloys—the effects of microstructure and operating parameters International Journal of Fatigue, 25, (9-11), pp. 1089-1099. (doi:10.1016/S0142-1123(03)00146-4).

Papatheou, E, Wei, X, Jiffri, M, Prandina, M, Ghandchi Tehrani, Maryam, Bode, S, Singh, K.V, Mottershead, John and Cooper, J.E (2012) Flutter control using vibration test data: theory, rig design and preliminary results At International Seminar on Modal Analysis (ISMA2012), Belgium. 17 - 19 Sep 2012.

Patelli, Giulia, Morioka, Miyuki and Griffin, Michael (2015) Effect of bending the legs on the discomfort caused by vertical vibration when standing At 50th United Kingdom Conference on Human Responses to Vibration, United Kingdom. 09 - 10 Sep 2015. 9 pp.

Paulitsch, C., Okamoto, K-I. and Utsunomiya, K. (2003) Self-sensing active damping guide roller for elevators At VDI-Berichte 1753, 5.VDI-Mechatronik Tagung 2003. 07 - 08 May 2003. 20 pp, pp. 91-110.

Pavic, G. (1976) Techniques for the determination of vibration transmission mechanisms in structures University of Southampton, Institute of Sound and Vibration Research, Doctoral Thesis , 165pp.

Pelegrinis, M.T., Pope, S.A., Zazas, I. and Daley, Stephen (2013) Noise suppression using local acceleration feedback control of and active absorber At 20th International Congress on Sound and Vibration, Thailand. 07 - 12 Jul 2013. 8 pp.

Peralta-Martinez, M.V., Assael, M.J., Dix, M.J., Karagiannidis, L. and Wakeham, W.A., Wakeham, W.A.(ed.) (2006) A novel instrument for the measurement of the thermal conductivity of molten metals. Part 1: instrument's description International Journal of Thermophysics. Proceedings of the Fifteenth Symposium on Thermophysical Properties, Part II, 27, (2), pp. 353-375. (doi:10.1007/s10765-005-0008-z).

Peralta-Martinez, M.V., Assael, M.J., Dix, M.J., Karagiannidis, L. and Wakeham, W.A., Wakeham, W.A.(ed.) (2006) A novel instrument for the measurement of the thermal conductivity of molten metals. Part II: measurements International Journal of Thermophysics. Proceedings of the Fifteenth Symposium on Thermophysical Properties, Part II, 27, (3), pp. 681-698. (doi:10.1007/s10765-006-0057-y).

Perez, M., Thomazi, C. and Syngellakis, S., (2000) Stress analysis of fluid film bearings Su, Daizhong (ed.) In Proceedings of the International Conference on Gearing, Transmission and Mechanics Systems. Wiley., pp. 729-738.

Perillo-Marcone, A. and Taylor, M. (2007) Effect of varus/valgus malalignment on bone strains in the proximal tibia after TKR: an explicit finite element study Journal of Biomechanical Engineering, 129, (1), pp. 1-11. (doi:10.1115/1.2401177).

Petyt, M. (2003) Book review. Proceedings of the 2002 International Conference on Modal Analysis, Noise and Vibration Engineering by P. Sas, and B. van Hal (Eds.), KU Leuven, Belgium, price €60, CD-Rom, ISBN 90-73802-79-2 Journal of Sound and Vibration, 268, (5), pp. 1057-1058. (doi:10.1016/j.jsv.2003.09.003).

Petyt, M. and Ribeiro, P., (2000) Geometrical non-linear periodic vibration of plates Rajapakse, Y. (ed.) In Proceedings of IMECE 2000: International Mechanical Engineering Congress & Exposition, November 5-10, 2000, Walt Disney World Dolphin, Orlando, Florida. American Society of Mechanical Engineers. 13 pp, pp. 61-72.

Phan, T.S., Dulieu-Barton, J.M. and Temarel, P. (2006) Thermoelastic stress analysis of structures under natural vibrations Experimental Mechanics, 46, (4), pp. 463-472. (doi:10.1007/s11340-006-8445-6).

Pierron, F. and Forquin, P. (2012) Ultra high speed full-field deformation measurements on concrete spalling specimens and stiffness identification with the Virtual Fields Method Strain, 28, (5), pp. 388-405. (doi:10.1111/j.1475-1305.2012.00835.x).

Pierron, Fabrice (2010) Identification of Poisson's ratios of standard and auxetic low density polymeric foams from full-field measurements The Journal of Strain Analysis for Engineering Design, 45, (4), pp. 233-253. (doi:10.1243/03093247JSA613).

Pinho-Lopes, M. and Lopes, M.L. (2015) Synergisms between laboratory mechanical and abrasion damage on mechanical and hydraulic properties of geosynthetics Transportation Geotechnics, 4, pp. 50-63. (doi:10.1016/j.trgeo.2015.07.001).

Pitelet, C., Wright, M.C.M. and Nelson, P.A. (2001) Optimization of flow distortions for fan noise reduction with one-sided actuators At Proceedings of the 7th AIAA/CEAS Aeroacoustics Conference. 28 - 30 May 2001. 5 pp.

Pitts, G., Dunsmore, W., Please, C.P., Lewis, S.M. and Sexton, C.J. (1996) An application of experimental design to the development of improved hydraulic pumps At Proceedings of the 1st International Nordic Design Seminar on Engineering Design (NordDesign'96). 28 - 30 Aug 1996. , pp. 103-108.

Placidi, Marco and Ganapathisubramani, Bharath (2015) Effects of frontal and plan solidities on aerodynamic parameters and the roughness sublayer in turbulent boundary layers Journal of Fluid Mechanics, 782, pp. 541-566. (doi:10.1017/jfm.2015.552).

Polcar, T. (2015) Smart surfaces for lubrication: solid lubricants and adaptive texture In, Cha, Sung Chul and Erdemir, Ali (eds.) Coating Technology for Vehicle Applications. Cham, CH, Springer pp. 203-214. (doi:10.1007/978-3-319-14771-0_12).

Polcar, T. and Cavaleiro, A (2013) Towards frictionless surfaces - ultra-low friction materials for engineering applications Materials World, 21, (7), pp. 24-26.

Polcar, T. and Cavaleiro, A (2014) High temperature behavior of nanolayered CrAlTiN coating: thermal stability, oxidation, and tribological properties [in special issue: 25 Years of TiAlN Hard Coatings in Research and Industry] Surface and Coatings Technology, 257, pp. 70-77. (doi:10.1016/j.surfcoat.2014.07.053).

Polcar, T., Parreira, N.M.G. and Cavaleiro, A. (2007) Structural and tribological characterization of tungsten nitride coatings at elevated temperature Wear, 265, (3-4), pp. 319-326. (doi:10.1016/j.wear.2007.10.011).

Pope, Simon A., Laalej, Hatim, Daley, Stephen and Reynolds, Matthew (2012) Active elastic metamaterials with applications in vibration and acoustics At Internoise 2012, United States. 19 - 22 Aug 2012. 12 pp.

Prandina, Marco, Ghandchi Tehrani, Maryam, Cooper, J.E and Mottershead, John (2011) Receptance method for active vibration control and aeroservoelasticity At Euromech 2011, Colloquium 530: Structural Control and Energy Harvesting, United Kingdom. 25 - 27 Jul 2011.

Prasanna, S. and Spearing, S.M. (2007) Materials selection and design of microelectrothermal bimaterial actuators Journal of Microelectromechanical Systems, 16, (2), pp. 248-259. (doi:10.1109/JMEMS.2006.889528).

Prerapa, Surya Mohan (2009) Projection schemes for stochastic partial differential equations University of Southampton, School of Engineering Sciences, Doctoral Thesis , 143pp.

Price, F.A. (2002) Effect of foot motion on the rate of increase in discomfort with increase in vibration magnitude during fore-aft whole-body vibration At 37th United Kingdom Conference on Human Responses to Vibration. 18 - 20 Sep 2002. , pp. 43-51.

Price, F.A. (2003) Effect of foot vibration on the location of most discomfort for seated persons during fore-and-aft whole-body vibration At 38th United Kingdom Conference on Human Responses to Vibration, Institute of Naval Medicine. 17 - 19 Sep 2003. , pp. 391-404.

Prior, Stephen D. (2012) Introducing the HALO small unmanned aerial vehicle At SMi - Military Robotics Conference, United Kingdom. 12 - 13 Nov 2012.

Proudhon, Henry, Moffat, A., Sinclair, Ian and Buffiere, Jean-Yves (2012) Three-dimensional characterisation and modelling of small fatigue corner cracks in high strength Al-alloys [in special issue: Use of large scale facilities for research in metallurgy ] Comptes Rendus Physique, 13, (3), pp. 316-327. (doi:10.1016/j.crhy.2011.12.005).

Puget, Y., Wood, R.J.K. and Trethewey, K. (1997) Cost effective tribo-corrosion resistant coatings for aggressive marine environments At Proceedings of 1st World Tribology Congress. 01 Sep 1997. , p.369.

Pujara, K.K. (1970) Vibrations of and sound radiating from some periodic structures under convected loading University of Southampton, Institute of Sound and Vibration Research, Doctoral Thesis , 256pp.

Qazalbash, Arfakhshand (2014) Rotor eddy current power losses in high speed permanent magnet synchronous generators University of Southampton, Faculty of Engineering and the Environment, Doctoral Thesis , 265pp.

Qiao, X.G., Zhang, X.Y., Li, X, Chen, Y, Zheng, M.Y., Wu, K, Gao, N and Starink, M.J. (2015) Cold bonding of Al/Mg disks through high pressure torsion At 10th International Conference on Magnesium Alloys and Their Applications (Mg 2015), Korea, Republic of. 11 - 16 Oct 2015.

Qiao, Xiao Guang, Starink, Marco J. and Gao, Nong (2009) Local strengthening mechanisms and annealing response of an aluminium alloy after ECAP At The 2nd International Symposium of Bulk Nanostructured Materials (BNM-2009). 22 - 26 Sep 2009.

Qiao, Xiaoguang, Starink, Marco J. and Gao, Nong (2010) The influence of indenter tip rounding on the indentation size effect Acta Materialia, 58, (10), pp. 3690-3700. (doi:10.1016/j.actamat.2010.03.004).

Qin, Hong-ling, Zhou, Xin-cong, Zhao, Xin-ze, Xing, Jing-tang and Yan, Zhi-ming (2015) A new rubber/UHMWPE alloy for water-lubricated sternbearings Wear, 328-329, pp. 257-261. (doi:10.1016/j.wear.2015.02.016).

Qin, Li, Zhou, Xincong, Cao, Pengju, Xu, Pingyong, Xiang, Yongkun and Xiong, Yeping (2014) Analysis of longditudinal vibration power-flow in marine propulsion shafting system At 21st International Congress on Sound and Vibration (ICSV21), China. 13 - 17 Jul 2014. 10 pp.

Quinci, Federico (2014) Towards a micromechanical insight into the visco-dynamic behaviour of UHMWPE for the modelling of knee joint replacement systems University of Southampton, Faculty of Engineering and the Environment, Doctoral Thesis , 143pp.

Quinn, S, Moy, S.S.J. and Piggott, K. (2005) Lifting analysis and load test of a hook foundation in a GRP hull: a case study At 2nd NAFEMS Industrial Seminar, Simulation versus Test: "Linking Computational and Experimental Techniques in Industrial Applications". 09 Nov 2005.

Quinn, S., Boyd, S.W., Dulieu-Barton, J.M. and Poulain, N. (2005) Performance of pin-loaded holes in GRP components At 2005 SEM Annual Conference. 07 - 09 Jun 2005. 8 pp.

Quinn, S. and Dulieu-Barton, J.M. (2002) Determination of stress concentration factors for holes in cylinders using thermoelastic stress analysis Strain, 38, (3), pp. 105-118. (doi:10.1046/j.0039-2103.2002.00012.x).

Quinn, S., Dulieu-Barton, J.M., Eaton-Evans, J., Fruehmann, R.K. and Tatum, P. (2008) Thermoelastic assessment of plastic deformation The Journal of Strain Analysis for Engineering Design, 43, (6), pp. 451-468. (doi:10.1243/03093247JSA377).

Quinn, S., Dulieu-Barton, J.M. and Fruehmann, R.K. (2008) In-service TSA of composite structures using transient loading At SEM XI International Congress on Experimental and Applied Mechanics. 02 - 05 Jun 2008. 8 pp.

Quinn, S., Fruehmann, R.K. and Dulieu-Barton, J.M. (2009) Development of thermoelastic stress analysis as a non-destructive evaluation tool At 17th International Conference on Composite Materials. 27 - 31 Jul 2009. 9 pp.

Quinn, S., Moy, S.S.J. and Piggott, K. (2006) Combined lifting analysis and load test of a hook foundation in a GRP hull In Applied Mechanics and Materials. Trans Tech Publications. 5 pp, pp. 101-105.

Quinn, S., Sambasivam, S. and Dulieu-Barton, J.M. (2009) Derivation of the stress concentrations at holes in orthotropic plates using thermoelastic stress analysis At SEM Annual Conference & Exposition on Experimental and Applied Mechanics - Experimental Mechanics of High Performance Systems. 07 - 09 Jun 2009. 10 pp.

Quinn, S., Tatum, P.J., Dulieu-Barton, J.M. and Eaton-Evans, J. (2006) Residual stress and damage initiation in small stainless steel pipework In Proceedings of the 2006 SEM Annual Conference and Exposition on Experimental and Applied Mechanics 2006 (SEM 06). Society for Experimental Mechanics (SEM). 10 pp, pp. 763-772.

Quinn, S., Tatum, P.J., Dulieu-Barton, J.M., Frühmann, R.K. and Eaton-Evans, J. (2007) Thermoelastic investigation of damage evolution in small stainless steel pipework At 13th International Conference on Experimental Mechanics (ICEM07). 01 - 06 Jul 2007. 9 pp.

Quinn, Simon, Lin, Shiang-Jiun, McCabe, Jonathan and Rowlands, Robert E. (2006) Determining orthotropic coefficients from, and thermoelastic stress analysis of, diametrically loaded composite disk At ASME International Mechanical Engineering Congress and Exposition (IMECE 06). 05 - 10 Nov 2006. 6 pp.

Radcliffe, I.A.J. and Taylor, M. (2007) Investigation into the affect of cementing techniques on load transfer in the resurfaced femoral head: a multi-femur FE based study Clinical Biomechanics, 22, (4), pp. 422-430. (doi:10.1016/j.clinbiomech.2006.12.001).

Radcliffe, I.A.J. and Taylor, M. (2007) Investigation into the effect of varus-valgus orientation on load transfer in the resurfaced femoral head: a multi-femur finite element analysis Clinical Biomechanics, 22, (7), pp. 780-786. (doi:10.1016/j.clinbiomech.2007.03.011).

Rademeyer, Paul, Carugo, Dario, Lee, Jeong Yu and Stride, Eleanor (2014) Microfluidic system for high throughput characterisation of echogenic particles Lab on a Chip, 15, (2), pp. 417-428. (doi:10.1039/c4lc01206b). (PMID:25367757).

Ragkousis, G., Curzen, N. and Bressloff, N.W. (2014) Simulation of longitudinal stent deformation in a patient-specific coronary artery Medical Engineering & Physics, 36, (4), pp. 467-476. (doi:10.1016/j.medengphy.2014.02.004).

Rajahram, S.S., Harvey, T.J., Walker, J.C., Wang, S.C. and Wood, R.J.K. (2011) Investigation of erosion-corrosion mechanisms of UNS S31603 using FIB and TEM [in special issue: 37th Leeds-Lyon Symposium on Tribology Special issue: Tribology for Sustainability: Economic, Environmental, and Quality of Life] Tribology International, 46, (1), pp. 161-173. (doi:10.1016/j.triboint.2011.05.012).

Ram, Y.M, Mottershead, J.E. and Ghandchi Tehrani, Maryam (2011) Partial pole placement [in special issue: NIU] Linear Algebra and its Applications, 434, (7), pp. 1689-1696. (doi:10.1016/j.laa.2010.07.014).

Ranga Dinesh, K.K.J., Jiang, X., Malalasekera, W. and Odedra, A. (2013) Large eddy simulation of fuel variability and flame dynamics of hydrogen-enriched nonpremixed flames [in special issue: Selected Papers from the Eleventh International Conference on Combustion and Energy Utilizatio (ICCEU)] Fuel Processing Technology, 107, pp. 2-13. (doi:10.1016/j.fuproc.2012.07.019).

Rao, A.R., Keane, A.J. and Scanlan, J.P. (2005) A Cost based Methodology for Design Optimization At ASME 2005 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. 24 - 28 Sep 2005. , pp. 1-10.

Ratoi, M., Anghel, V., Bovington, C. and Spikes, H.A. (2000) Mechanisms of oiliness additives Tribology International, 33, (3-4), pp. 241-247. (doi:10.1016/S0301-679X(00)00037-2).

Ratoi, M. and Spikes, H.A. (1999) Lubricating properties of aqueous surfactant solutions Tribology Transactions, 42, (3), pp. 479-486. (doi:10.1080/10402009908982244).

Ratoi, Monica, Niste, Vlad, Alghawel, Husam, Suen, Andrew and Nelson, Kenneth (2014) The impact of organic friction modifiers on engine oil tribofilms [in special issue: Web-Themed Issue on Tribology] RSC Advances, 4, (9), pp. 4278-4285. (doi:10.1039/C3RA46403B).

Ratoi, Monica, Niste, Vlad and Zekonyte, Jurgita (2014) WS2 nanoparticles - potential replacement for ZDDP and friction modifier additives At 19th International Colloquium Tribology: Industrial and Automotive Lubrication, Germany. 21 - 23 Jan 2014. 9 pp.

Ratoi, Monica and Spikes, Hugh A. (1997) The lubricant film-forming properties of modern fire resistant hydraulic fluids In, Totten, G.E., Kling, G.H. and Smolenski, D.J. (eds.) Tribology of Hydraulic Pump Testing. Houston, US, ASTM International pp. 21-37. (doi:10.1520/STP11833S).

Redford, J.A., Lund, T.S. and Coleman, G.N. (2015) A numerical study of a weakly stratified turbulent wake Journal of Fluid Mechanics, 776, pp. 568-609. (doi:10.1017/jfm.2015.324).

Reed, N., Scanlan, J. and Halliday, S., (2008) Development of a lightweight knowledge based design system as a business asset to support advanced fixture and tooling design. Proceedings of the 15th ISPE International Conference on Concurrent Engineering (CE2008) Curran, R., Chou, S-Y. and Trappey, A. (eds.) In Collaborative Product and Service Life Cycle Management for a Sustainable World. Springer. 8 pp, pp. 217-224.

Reed, P.A.S. (2009) Fatigue crack growth mechanisms in superalloys: an overview Materials Science and Technology, 25, (2), pp. 258-270. (doi:10.1179/174328408X361463).

Reed, P.A.S. and Miller, M.D., (2008) Comparison of low cycle (notch) fatigue behaviour at temperature In single crystal turbine blade materials Reed, Roger, Green, Kenneth, Caron, Pierre, Gabb, Timothy P. and Fahrmann, Michael G. (eds.) In Superalloys 2008: Proceedings of the Eleventh International Symposium on Superalloys. Minerals, Metals and Materials Society., pp. 527-533.

Ribeiro, P. and Petyt, M. (2000) Nonlinear free vibration of isotropic plates with internal resonance International Journal of Non-linear Mechanics, 35, (2), pp. 263-78. (doi:10.1016/S0020-7462(99)00013-X).

Richardson, A.D., Evans, M.-H., Wang, L., Wood, R.J.K. and Anderson, William (2014) Confirming subsurface initiation and propagation as one mechanism for white etching crack (WEC) formation Tribology & Lubrication Technology, 70, (10), pp. 24-26.

Richardson, E.S. (2003) Modelling of homogeneous charge compression ignition engines Cambridge University, Department of Engineering, Masters Thesis .

Richardson, E.S., Granet, V.E., Eyssartier, A. and Chen, J.H. (2010) Effects of equivalence ratio variation on lean, stratified methane-air laminar counter?ow ?ames Combustion Theory and Modelling, 14, (6), pp. 775-792.

Richardson, E.S. and Mastorakos, E. (2007) Conditional moment closure modelling for spark ignition in a turbulent n-heptane spray At 5th Mediterranean Combustion Symposium, Tunisia. 09 - 13 Sep 2007.

Richardson, E.S., Yoo, C.S. and Chen, J.H. (2009) Analysis of second-order conditional moment closure applied to an autoignitive lifted hydrogen jet flame Proceedings of the Combustion Institute, 32, (2), pp. 1695-1703. (doi:10.1016/j.proci.2008.05.041).

Richardson, R.N. (1997) Internal combustion engines In, Stephens, Jack H. (eds.) Kempe's Engineers Year Book. London, UK, CMP Information pp. 1137-1202.

Richardson, R.N. (1997) CFC-free fridge for vaccines UNEP Ozone Action

Richardson, R.N. (2002) Internal combustion engines In, Kempe's engineers year book. CMP Information pp. 1205-1266.

Rigit, A.R.H. and Shrimpton, John S. (2006) Spray characteristics of charge injection electrostatic atomizers with small-orifice diameters Atomization and Sprays, 16, (4), pp. 421-442. (doi:10.1615/AtomizSpr.v16.i4.50).

Rikse, L., Hunt, H.E.M., Hussein, M.F.M., Degrande, G. and Gupta, S. (2007) A model for calculating vibration from a railway tunnel buried in a full-space including rigid bedrock At 14th International Congress on Sound and Vibration, Australia. 09 - 12 Jul 2007.

Rmaile, A., Carugo, D., Capretto, L., Wharton, J.A., Thurner, P.J., Aspiras, M., Ward, M., De Jager, M. and Stoodley, P. (2015) An experimental and computational study of the Hydrodynamics of High-velocity water microdrops for interproximal tooth cleaning Journal of the Mechanical Behavior of Biomedical Materials, 46, pp. 148-157. (doi:10.1016/j.jmbbm.2015.02.010).

Rmaile, Amir, Carugo, Dario, Capretto, Lorenzo, Aspiras, Marcelo, De Jager, Marko, Ward, Marilyn and Stoodley, Paul (2014) Removal of interproximal dental biofilms by high-velocity water microdrops Journal of Dental Research, 93, (1), pp. 68-73. (doi:10.1177/0022034513510945). (PMID:24170371).

Rmaile, Amir, Carugo, Dario, Capretto, Lorenzo, Zhang, Xunli, Wharton, Julian A., Thurner, Philipp J., Aspiras, Marcelo, Ward, Marylin and Stoodley, Paul (2013) Microbial tribology and disruption of dental plaque bacterial biofilms Wear, 306, (1-2), pp. 276-284. (doi:10.1016/j.wear.2013.02.010).

Robinson, A.F., Dulieu-Barton, J.M., Quinn, S. and Burguete, R.L., (2009) A review of residual stress analysis using thermoelastic techniques Dulieu-Barton, J.M. (ed.) In 7th International Conference on Modern Practice in Stress and Vibration Analysis. Insitute of Physics Publishing. 8 pp, p. 12029. (doi:10.1088/1742-6596/181/1/012029).

Robinson, A.F., Dulieu-Barton, J.M., Quinn, S. and Burguete, R.L. (2010) Paint coating characterization for thermoelastic stress analysis of metallic materials Measurement Science and Technology, 21, (8), 085502-[12pp]. (doi:10.1088/0957-0233/21/8/085502).

Robinson, A.F., Dulieu-Barton, J.M., Quinn, S. and Burguete, R.L. (2010) Thermoelastic investigation of residual stress: plastic deformation and the change in thermoelastic constant Journal of Holocaust Education, 6, 38016-[8pp]. (doi:10.1051/epjconf/20100638016).

Robinson, Gordon, El-Beltagy, Mohammed and Keane, Andy (1999) Optimization in mechanical design In, Bentley, Peter J. (eds.) Evolutionary Design by Computers. San Francisco, USA, Morgan Kaufmann (Elsevier) pp. 147-166.

Rodamporn, S., Beeby, S., Harris, N., Brown, A., Hill, M. and Chad, J. (2007) Microfluidic system for cell transfection using sonoporation and ultrasonic particle manipulation At International Conference on Cellular & Molecular Bioengineering. 10 - 12 Dec 2007.

Roh, H. and Daley, Stephen (2009) The online optimisation of stator vane settings in multi-stage axial compressors International Journal of Advanced Mechatronic Systems, 1, (4), p. 266. (doi:10.1504/IJAMECHS.2009.026332).

Ronaldson, K.A., Fitt, A.D., Goodwin, A.R.H. and Wakeham, W.A. (2006) Transversely oscillating MEMS viscometer: the "Spider" International Journal of Thermophysics. Proceedings of the Fifteenth Symposium on Thermophysical Properties, Part II, 27, (6), pp. 1677-1695. (doi:10.1007/s10765-006-0115-5).

Rosa, L., Squicciarini, G., Belloli, M., Collina, A., Nieto, F. and Jurado, J.A. (2014) Wind loads analysis at the anchorages of the Talavera de la Reina cable stayed bridge Case Studies in Structural Engineering, 1, pp. 1-5. (doi:10.1016/j.csse.2014.01.001).

Rubino, L., Crane, R.I. and Arcoumanis, C.A. (2005) An electrostatic trap for control of ultrafine particle emissions from gasoline-engined vehicles Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 219, (4), pp. 535-546. (doi:10.1243/095440705X6668).

Rustighi, E., Brennan, M.J. and Mace, B.R. (2003) Design of the adaptive vibration absorber using shape memory alloy University of Southampton, Institute of Sound and Vibration Research 98pp. , Southampton, UK (ISVR Technical Memorandum, 920).

Rustighi, E., Carmignani, C. and Forte, P. (2004) Experimental identification of the dynamic coefficients of mechanical systems by means of modulating functions At IFToMM The Eleventh World Congress in Mechanism and Machine Science. 01 - 04 Apr 2004.

Rustighi, E. and Elliott, S.J. (2007) Stochastic road excitation and control feasibility in a 2d linear tyre model Journal of Sound and Vibration, 300, (3-5), pp. 490-501. (doi:10.1016/j.jsv.2006.06.076).

Rustighi, E., Mace, B.R. and Ferguson, N.S. (2011) An adaptive anechoic termination for active vibration control Journal of Vibration and Control, 17, (13), pp. 2066-2078. (doi:10.1177/1077546311403788).

Rustighi, E., Sek, M.A. and Elliott, S.J. (2006) Stochastic analysis of the non-linear road/tyre excitation At Euronoise 2006: 6th European Conference on Noise Control, Finland. 30 May - 01 Jun 2006.

Rustighi, Emiliano (2004) Dynamics of rotating machinery: analysis, identification and control [Dinamica degli organi rotanti: analisi, identificazione e controllo] University of Pisa, Italy, Department of Mechanical, Nuclear and Production Engineering, Doctoral Thesis , 191pp.

Saavedra Flores, E.I., Diaz Dela O, F.A., Ajaj, R.M. and Friswell, M.I. (2013) Multi-scale modelling of the stochastic mechanical properties of wood and bio-inspired materials At Seventh M.I.T. Conference on Computational Fluid and Solid Mechanics - Focus: Multiphysics and Multiscale, United States. 12 - 14 Jun 2013.

Saavedra Flores, E.I., Friswell, M.I., DiazDelaO, F.A. and Ajaj, R.M. (2013) Investigation on the extensibility of the wood cell-wall composite by an approach based on homogenisation and uncertainty analysis Composite Structures, 108, pp. 212-222. (doi:10.1016/j.compstruct.2013.08.034).

Sabhnani, Rahul, Humphrey, V.F., Zaghari, B. and Moshrefi-Torbati, M. (2015) Fault detection in small diameter pipes using ultrasonic guided wave technology At Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2015, United States. 20 - 24 Mar 2015. 13 pp, 94353F-2. (doi:10.1117/12.2085494).

Sabhnani, Rahul M., Humphrey, Victor, Zaghari, Bahareh and Moshrefi-Torbati, Mohamed (2015) Fault detection in small diameter pipes using ultrasonic guided wave technology At Proceedings of SPIE 9435, Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2015. , pp. 1-13. (doi:10.1117/12.2085494).

Sachdeva, Sachin K., Nair, Prasanth B. and Keane, Andy J. (2006) Comparative study of projection schemes for stochastic finite element analysis Computer Methods in Applied Mechanics and Engineering, 195, (19-22), pp. 2371-2392. (doi:10.1016/j.cma.2005.05.010).

Sahin, M. and Shenoi, R.A. (2003) Vibration-based damage identification in beam-like composite laminates by using artificial neural networks Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 217, (6), pp. 661-676. (doi:10.1243/095440603321919581).

Saleh, Naseer Ahmed (1987) Investigation of reciprocating internal combustion engine structure response and vibration transmission using a hydraulic simulation technique University of Southampton, Institute of Sound and Vibration Research, Doctoral Thesis , 425pp.

Salvi, Jonathan, Rizzi, Egidio, Rustighi, Emiliano and Ferguson, N.S. (2015) On the optimization of a hybrid tuned mass damper for impulse loading Smart Materials and Structures (doi:10.1088/0964-1726/24/8/085010).

Samarasinghe, P.N., Poletti, M.A., Salehin, S.M.A., Abhayapala, T.D. and Fazi, F.M. (2013) 3D soundfield reproduction using higher order loudspeakers At 2013 IEEE International Conference on Acoustics, Speech and Signal Processing (ICASSP), Canada. 26 - 31 May 2013.

Sambasivam, S., Quinn, S. and Dulieu-Barton, J.M. (2008) Thermoelastic stress analysis of holes in laminated composite materials At SEM XI International Congress on Experimental and Applied Mechanics. 02 - 05 Jun 2008. 10 pp.

Sambasivam, S., Quinn, S. and Dulieu-Barton, J.M. (2009) Identification of the source of the thermoelastic response from orthotropic laminated composites At 17th International Conference on Composite Materials (ICCM17). 27 - 31 Jul 2009. 11 pp.

Sandham, N.D. (2005) A constrained vortex model with relevance to helicopter vortex ring state University of Southampton 14pp. , Southampton, UK (Aerodynamics and Flight Mechanics Internal Report Series, AFM 05/05).

Sandham, Neil D., Salgado, Adriana M. and Agarwal, Anurag (2008) Jet noise from instability mode interactions At 14th AIAA/CEAS Aeroacoustics Conference. 05 - 07 May 2008. 12 pp.

Sandham, Neil D. and Sandberg, Richard D. (2008) Development of Brown-Roshko structures in the mixing layer behind a splitter plate At ERCOFTAC Workshop: Direct and Large-Eddy Simulations 7 (DLES7). 08 - 10 Sep 2008. 6 pp, pp. 1-6.

Sandham, Neil D. and Sandberg, Richard D. (2009) Direct numerical simulation of the early development of a turbulent mixing layer downstream of a splitter plate Journal of Turbulence, 10, (1), pp. 1-17. (doi:10.1080/14685240802698774).

Santiuste, C., Thomsen, O.T. and Frostig, Y. (2011) Thermo-mechanical load interactions in foam cored axi-symmetric sandwich circular plates – high-order and FE models Composite Structures, 93, (2), pp. 369-376. (doi:10.1016/j.compstruct.2010.09.005).

Sapouna, K., Xiong, Y.P. and Shenoi, R.A. (2012) Nonlinear viscoelastic model of isotropic and anisotropic magnetorheological elastomers At 4th International Conference “Smart Materials, Structures and Systems" (CIMTEC2012), Italy. 10 - 14 Jun 2012.

Sarban, R., Mace, B.R., Jones, R.W. and Rustighi, E. (2010) Active vibration isolation using a dielectric electro-active polymer actuator At Proceedings of MOVIC2010 The 10th International Conference on Motion and Vibration Control (MOVIC 2010), Japan. 17 - 20 Aug 2010.

Sasaki, T., Waters, T.P. and Tsuji, Y. (2015) Experimental study on a nonlinear vibration isolator based on a post-buckled inverted L-shaped beam Mechanical Engineering Journal, 2, (3) (doi:10.1299/mej.15-00030).

Sathon, N. and Dulieu-Barton, J.M. (2006) Internal crack detection and analysis using thermoelastic stress analysis At 16th European Conference of Fracture (ECF 16). 03 - 07 Jun 2006. 8 pp.

Sathon, N. and Dulieu-Barton, J.M. (2007) Evaluation of sub-surface stresses using thermoelastic stress analysis Applied Mechanics and Materials, 7-8, pp. 153-158.

Sayma, A.I., Wilson, A.G., Breard, C. and Tester, B.J. (2006) A time-domain model for fan noise generation and propagation in lined nacelles Journal of Sound and Vibration

Schillai, Sophia, Phillips, Alex, Turnock, Stephen, Rogers, Eric and Harris, Catherine (2016) Evaluation of terrain collision risks for flight style autonomous underwater vehicles In 2016 IEEE/OES Autonomous Underwater Vehicles (AUV). IEEE., pp. 311-318. (doi:10.1109/AUV.2016.7778689).

Schitter, Georg, Thurner, Philipp J. and Hansma, Paul K. (2008) Design and input shaping control of a novel scanner for high-speed atomic force. [In special section on Optimized System Performances Through Balanced Control Strategies, The 4th IFAC Symposium on Mechatronic Systems – Mechatronics 2006] Mechatronics, 18, (5-6), pp. 282-288. (doi:10.1016/j.mechatronics.2008.02.007).

Schneider, Philipp, Voide, Romain, Stampanoni, Marco, Donahue, Leah Rae and Müller, Ralph (2012) The importance of the intracortical canal network for murine bone mechanics Bone, 53, (1), pp. 120-128. (doi:10.1016/j.bone.2012.11.024).

Schoettle, C., Sinclair, I., Starink, M.J. and Reed, P.A.S. (2012) Deflected teardrop cracking in nickel based superalloys: sustained macroscopic deflected fatigue crack growth International Journal of Fatigue, 44, pp. 188-201. (doi:10.1016/j.ijfatigue.2012.04.017).

Scott, A.E., Clinch, M., Hepples, W., Kalantzis, N., Sinclair, I. and Spearing, S.M. (2009) Advanced micromechanical analysis of highly loaded hybrid composite structures At 17th International Conference on Composite Materials (ICCM-17). 27 - 31 Jul 2009.

Scott, A.E., Sinclair, I. and Spearing, S.M. et al. (2012) Damage accumulation in a carbon/epoxy composite: comparison between a multiscale model and computed tomography experimental results Composites Part A Applied Science and Manufacturing, 43, (9), pp. 1514-1522. (doi:10.1016/j.compositesa.2012.03.011).

Screen, Hazel R.C., Fessel, Gion, Li, Yufei, Diederich, Vincent, Guizar-Sicairos, Manuel, Schneider, Philipp, Sell, David R., Monnier, Vincent M. and Snedeker, Jess G. (2014) Advanced glycation end-products reduce collagen molecular sliding to affect collagen fibril damage mechanisms but not stiffness PLoS ONE, 9, (11), pp. 1-12. (doi:10.1371/journal.pone.0110948). (PMID:25364829).

Seidel, H. and Griffin, M.J. (2001) Modelling the response of the spinal system to whole-body vibration and repeated shock Clinical Biomechanics, 16, (Supplement 1), pp. 3-7. (doi:10.1016/S0268-0033(00)00095-4).

Setiawan, R., Syngellakis, S. and Hill, M. (2009) A metamodelling approach to mechanical characterisation of anisotropic plates Journal of Composite Materials, 43, (21), pp. 2333-49. (doi:10.1177/0021998308099008).

Sexton, C.J., Dunsmore, W., Lewis, S.M., Please, C.P. and Pitts, G. (2000) Semi-controlled experiment plans for improved mechanical engineering designs Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 214, (2), pp. 95-105.

Shadle, C., Barney, A. and De Stefano, A. (2002) Jet structure in a mechanical model of the vocal folds and vocal tract: static and dynamic measurements In Proceedings of the 3rd Biennial International Conference on Voice Physiology and Biomechanics. International Conference on Voice Physiology and Biomechanics. 2 pp.

Shaheed, M.H., Tokhi, M.O., Chipperfield, A.J. and Azad, A.K.M. (2001) Modelling and open-loop control of a single-link flexible manipulator with genetic algorithms Journal of Low Frequency Noise, Vibration and Active Control, 20, (1), 39 - 55. (doi:10.1260/0263092011492975).

Shahmir, Hamed, Nili-Ahmadabadi, Mahmoud, Huang, Yi and Langdon, Terence G. (2014) Evolution of microstructure and hardness in NiTi shape memory alloys processed by high-pressure torsion Journal of Materials Science, 49, pp. 2998-3009. (doi:10.1007/s10853-013-7985-2).

Shahmir, Hamed, Nili-Ahmadabadi, Mahmoud, Mansouri-Arani, Mojtaba, Khajezade, Ali and Langdon, Terence G. (2014) Evaluating the room temperature ECAP processing of a NiTi alloy via simulation and experiments Advanced Engineering Materials, 17, (4), pp. 532-538. (doi:10.1002/adem.201400248).

Shahzad, Faisal and Qiu, Yi (2015) Co-simulation of a dynamic stiffness test of a seat cushion using finite element and multibody dynamic models At 50th United Kingdom Conference on Human Responses to Vibration, United Kingdom. 09 - 10 Sep 2015. 10 pp.

Shapiro, Karen, Achintha, Mithila, Withers, Phillip and Nowell, David (2011) Optimising LSP conditions and modelling the geometric effects on residual stress At 3rd International Conference on Laser Peening, Japan. 11 - 14 Oct 2011.

Sharkh, Suleiman M.A. and Mohammad, Mohammad T. (2007) Axial field permanent magnet DC motor with powder iron armature IEEE Transactions on Energy Conversion, 22, (3), pp. 608-613. (doi:10.1109/TEC.2007.895870).

Sharman, Katarzyna, Bazarnik, Piotr, Brynk, Tomasz, Bulutsuz, Asli G., Lewandowska, Malgorzata, Huang, Yi and Langdon, Terence G. (2015) Enhancement in mechanical properties of a beta-titanium alloy by high-pressure torsion Journal of Materials Research and Technology, 4, pp. 79-83. (doi:10.1016/j.jmrt.2014.10.010).

Shearwood-Porter, Natalie (2013) Micromechanical characterisation of fatigue failure in acrylic bone cement University of Southampton, Engineering and the Environment, Doctoral Thesis , 225pp.

Sheikh, A.H., Asadi, A and Thomsen, O.T. (2015) Vibration of thin-walled laminated composite beams having open and closed sections Composite Structures, 134, pp. 209-215. (doi:10.1016/j.compstruct.2015.08.025).

Shenoi, R.A., Dulieu-Barton, J.M., Quinn, S., Blake, J.I.R. and Boyd, S.W. (1970) Composite materials for marine applications – key challenges for the future At IMAST Workshop on Polymeric and Composite Materials: a Vision for the Future. 26 - 27 Sep 2008. 25 pp.

Shim, D-J, Spearing, S.M. and Yang, Q. (2007) Crack initiation and growth in solder joints under cyclic shear deformation using piezomechanical actuation Journal of Engineering Materials and Technology, 129, (1), pp. 19-28. (doi:10.1115/1.2400257).

Shim, Dong Jin, Sun, Hong-Wei, Vengallatore, S.T. and Spearing, S.M. (2006) Damage and failure in silicon-glass-metal microfluidic joints for high-pressure MEMS devices Journal of Microelectromechanical Systems, 15, (1), pp. 246-258. (doi:10.1109/JMEMS.2005.859205).

Shim, Dong-Jin, Sun, Hong-Wei, Vengallatore, Srikar T and Spearing, S. Mark, (2004) Damage and failure mechanisms in high pressure silicon-glass-metal microfluidic connections LaVan, David A., Ayon, Arturo A., Madou, Mark J., McNie, Mark E. and Prasad, Samouri V. (eds.) In Materials Research Society Symposium Proceedings: Micro- and Nanosystems. Materials Research Society., pp. 69-74.

Shin, D and Richardson, E.S. (2015) Modelling of ensemble-averaged premixed flame front under harmonic oscillation Proceedings of the Combustion Institute

Shin, K., Brennan, M.J., Yong-Goo, J. and JaeEung, O. (2004) Simple models to investigate the effect of velocity dependent friction on disc brake squeal noise International Journal of Automotive Technology, 5, (1), pp. 61-67.

Shin, K., Feraday, S.A., Harris, C.J., Brennan, M.J. and Oh, J.-E. (2003) Optimal autoregressive modelling of a measured noisy time series using singular value decomposition Mechanical Systems and Signal Processing, 17, (2), pp. 423-432. (doi:10.1006/mssp.2002.1510).

Shin, K., Oh, J.-E. and Brennan, M.J. (2002) Nonlinear analysis of friction induced vibrations of a two-degree-of-freedom model for disc brake squeal noise Japan Society of Mechanical Engineers International Journal, Series C, 45, (2), pp. 426-432.

Shin, Mincheol, Fazi, Filippo Maria, Nelson, Philip Arthur and Seo, Jeongil (2013) Control of velocity for sound field reproduction At AES 52nd International Conference: Sound Field Control - Engineering and Perception, United Kingdom. 02 - 04 Sep 2013.

Shrimpton, J.S. (2003) Pulsed charged sprays: application to DISI engines during early injection International Journal for Numerical Methods in Engineering, 58, (3), pp. 513-536. (doi:10.1002/nme.794).

Shrimpton, J.S. (2005) Dielectric charged drop break-up at sub-Rayleigh limit conditions IEEE Transactions on Dielectrics & Electrical Insulation, 12, (3), pp. 573-578. (doi:10.1109/TDEI.2005.1453462).

Shrimpton, J.S. and Crane, R.I. (2001) Small electrocyclone performance Chemical Engineering & Technology, 24, (9), pp. 951-955. (doi:10.1002/1521-4125(200109)24:9<951::AID-CEAT951>3.0.CO;2-9).

Shrimpton, J.S., Kashdan, J.T. and Whybrew, A. (2004) Two-phase flow characterization by automated digital image analysis. part 1: fundamental principles and calibration of the technique Particle & Particle Systems Characterization, 20, (6), pp. 387-397. (doi:10.1002/ppsc.200300897).

Shrimpton, J.S. and Yule, A.J. (1999) Characterisation of charged hydrocarbon sprays for application in combustion systems Experiments in Fluids, 26, (5), pp. 460-469. (doi:10.1007/s003480050310).

Shrimpton, J.S., Yule, A.J. and Watkins, A.P. (1997) A turbulent transient charged spray model International Journal of Fluid Mechanics Research, 24, (6), pp. 757-768.

Shrimpton, John and Kourmatzis, Agissilaos (2009) Downsizing direct injection spark ignition engines: a timescale analysis In, Demidov, Sergey and Bonnet, Jacques (eds.) Traffic Related Air Pollution and Internal Combustion Engines. New York, USA, Nova (Air, Water and Soil Pollution Science and Technology).

Shrimpton, John S. and Rigit, A.R.H. (2006) Electrical performance of charge injection atomizers Atomization and Sprays, 16, (4), pp. 401-419. (doi:10.1615/AtomizSpr.v16.i4.40).

Shrimpton, John S. and Yule, Andrew J. (2004) Design issues concerning charge injection atomizers Atomization and Sprays, 14, (2), pp. 127-142. (doi:10.1615/AtomizSpr.v14.i2.30).

Shrimpton, j.s., Kashdan, j.t. and whybrew, a (2004) Two phase flow characterisation by automated Digital Image Analysis, Part 2 : Application of PDIA for Sizing Sprays Particle and Particle Systems Characterization, 21, pp. 387-397.

Shu, Dongwei and Della, Christian N. (2004) Free vibration analysis of composite beams with two non-overlapping delaminations International Journal of Mechanical Sciences, 46, (4), pp. 509-526. (doi:10.1016/j.ijmecsci.2004.05.008).

Shu, Dongwei and Della, Christian N. (2004) Vibrations of multiple delaminated beams Composite Structures, 64, (3-4), pp. 467-477. (doi:10.1016/j.compstruct.2003.09.047).

Siew, C.C., Hill, M., Holmes, R. and Brennan, M. (2001) A theoretical and experimental investigation into the vibration response of a flexible rotor and squeeze film damper assembly Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 215, (10), pp. 1251-1269. (doi:10.1243/0954406011524649).

Siew, C.C., Holmes, R., Hill, M. and Brennan, M.J. (2002) Reduced order modelling methods to assess the overall vibration response of a flexible rotor-squeeze film damper assembly Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 216, (11), pp. 1081-1097. (doi:10.1243/095440602761609452).

Simons, I.A. and Modha, A.N. (2002) Gyroscopic feathering moments and the 'Bell Stabiliser Bar' on helicopter rotors At 28th European Rotorcraft Forum. 17 - 20 Sep 2002. 8 pp.

Sion, R. and Atkinson, J.K. (2001) A novel low cost sensor for measuring cylinder pressure and improving performance of an internal combustion engine At 4th International Conference and Exhibition: Vehicle Electronic Systems. 01 Jan 2001.

Smith, Malcolm G. (2011) Rising to the challenge of a "Buy Quiet" campaign AWE International, 27, pp. 50-55.

Smyth, I.C. and Thew, M.T. (1996) A study of the effect of dissolved gas on the operation of liquid-liquid hydrocyclones In Proceedings of Hydrocyclones '96 Conference. MEP., pp. 357-368.

Snyder, William and Castro, Ian P. (2002) The critical Reynolds number for rough-wall boundary layers Journal of Wind Engineering and Industrial Aerodynamics, 90, (1), pp. 41-54. (doi:10.1016/S0167-6105(01)00114-3).

Soady, K.A. (2013) Reducing conservatism in life assessment approaches: industrial steam turbine blade to disc interfaces and the shot peening process University of Southampton, Faculty of Engineering and the Environment, Doctoral Thesis , 348pp.

Soady, K.A., Mellor, B.G. and Reed, P.A.S. (2013) Life assessment methodologies incorporating shot peening process effects: mechanistic consideration of residual stresses and strain hardening Part 2 ? approaches to fatigue lifing after shot peening Part 2 – approaches to fatigue lifing after shot peening Materials Science and Technology, 29, (6), pp. 652-664. (doi:10.1179/1743284713Y.0000000223).

Soady, K.A., Mellor, B.G., Shackleton, J., Morris, A. and Reed, P.A.S. (2011) The effect of shot peening on notched low cycle fatigue Materials Science and Engineering: A, 528, pp. 8579-8588. (doi:10.1016/j.msea.2011.08.003).

Soady, K.A., Mellor, B.G., West, G.D., Morris, A. and Reed, P.A.S. (2013) Evaluating surface deformation and near surface strain hardening resulting from shot peening a tempered martensitic steel and application to low cycle fatigue International Journal of Fatigue, 54, pp. 106-117. (doi:10.1016/j.ijfatigue.2013.03.019).

Sobester, Andras (2009) Notes on the connections between shape definition and the objective function landscape At 2nd International Conference on Advanced Engineering in Mechanical Systems (ADEMS' 09). 24 - 25 Sep 2009. 4 pp.

Sobey, A., Blake, J.I.R. and Shenoi, R.A. (2009) Optimisation approaches to design synthesis of marine composite structures Ship Technology Research / Schiffsteknik, 56, (1), pp. 24-30.

Sobey, A.J., Blake, J.I.R. and Shenoi, R.A. (2012) Monte Carlo reliability analysis of tophat stiffened composite plate structures under out of plane loading Journal of Reliability Engineering and System Safety, 110, pp. 41-49. (doi:10.1016/j.ress.2012.08.011).

Soleimani, Mostafa (2014) Thick film sensors for engine oil acidity detection University of Southampton, Faculty of Engineering and the Environment, Doctoral Thesis , 172pp.

Somkhanay, N. (1982) Computer optimised design of engine structures for low noise University of Southampton, Institute of Sound and Vibration Research, Doctoral Thesis , 139pp.

Song, Wenbin, Keane, Andy J., Rees, Janet, Bhaskar, Atul and Bagnall, Steven (2002) Local shape optimisation of a firtree root using NURBS In Proceedings of the 9th AIAA/ISSMO Symposium on Multidisciplinary Analysis and Optimization. American Institute of Aeronautics and Astronautics..

Song, Zhanxue, Xiong, Yeping, Xie, Jilong and Xing, Jing Tang (2013) Weld root magnification factors for semi-elliptical cracks in t-butt joints Acta Mechanica Solida Sinica, 26, (3), pp. 317-330. (doi:10.1016/S0894-9166(13)60029-4).

Souilah, Issam (2013) Provenance in distributed systems: a process algebraic study of provenance management and its role in establishing trust in data quality University of Southampton, Faculty of Physical Sciences and Engineering, Doctoral Thesis , 236pp.

Spigarelli, S., Cabibbo, M., Evangelista, E. and Langdon, T.G. (2002) Creep properties of an Al-2024 composite reinforced with SiC particulates Materials Science and Engineering: A, 328, (1-2), pp. 39-47. (doi:10.1016/S0921-5093(01)01698-7).

Spikes, Hugh A. and Ratoi, Monica, (2000) Molecular scale liquid lubricating films Dowson, D. (ed.) In Thinning films and tribological interfaces: Proceedings of the 26th Leeds-Lyon Symposium on Tribology. Elsevier. 834 pp, pp. 359-370. (doi:10.1016/S0167-8922(00)80140-6).

Squicciarini, G., Thompson, D.J. and Corradi, R. (2014) The effect of different combinations of boundary conditions on the average radiation efficiency of rectangular plates Journal of Sound and Vibration, 333, (17), pp. 3931-3948. (doi:10.1016/j.jsv.2014.04.022).

Squires, C.A., Chambers, A.R. and Netting, K.H. (2007) Understanding the factors affecting the compressive testing of carbon fibre composites Composites Part B: Engineering, 38, (4), pp. 481-487. (doi:10.1016/j.compositesb.2006.08.002).

Squires, Charlene A., Netting, Keith H. and Chambers, Alan R. (2007) Understanding the factors affecting the compressive testing of unidirectional carbon fibre composites Composites Part B: Engineering, 38, (4), pp. 481-487. (doi:10.1016/j.compositesb.2006.08.002).

Srinivasan, P. and Spearing, S. M. (2008) Effect of heat transfer on materials selection for bimaterial electrothermal actuators Journal of Microelectromechanical Systems, 17, (3), pp. 653-667. (doi:10.1109/JMEMS.2008.918617).

Srinivasan, P. and Spearing, S.M. (2008) Optimal materials selection for bimaterial piezoelectric microactuators Journal of Microelectromechanical Systems, 17, (2), pp. 462-472. (doi:10.1109/JMEMS.2008.918398).

Stanley, P., Dulieu-Barton, J.M. and Emery, T.R. (2008) On the concept of a fully bonded coupon gauge for stress separation from thermoelastic data The Journal of Strain Analysis for Engineering Design, 43, (6), pp. 507-517. (doi:10.1243/03093247JSA363).

Stanley, P., Phan, P.S. and Dulieu-Barton, J.M. (2007) Progress in the development of a thermoelastic gauge for stress separation At 13th International Conference on Experimental Mechanics (ICEM 13). 01 - 06 Jul 2007. 8 pp.

Starink, M.J. (2009) The thermodynamics of and strengthening due to co-clusters: general theory for application in modelling software At International Conference on Materials for Advanced Technologies 2009, Singapore. 28 Jun - 03 Jul 2009.

Starink, M.J. (2011) The thermodynamics of and strengthening due to co-clusters in ternary Al alloys: 2xxx and 6xxx alloys At European Conference on Aluminium Alloys, Germany. 05 - 07 Oct 2011.

Starink, M.J. and Reed, P.A.S. (2008) Thermal activation of fatigue crack growth: analysing the mechanisms of fatigue crack propagation in superalloys Materials Science and Engineering: A, 491, (1-2), pp. 279-289. (doi:10.1016/j.msea.2008.02.016).

Starink, M.J. and Wang, S.C. (2003) A model for the yield strength of Al-Zn-Mg-Cu alloys Acta Materialia, 51, (17), pp. 5131-5150. (doi:10.1016/S1359-6454(03)00363-X).

Starink, M.J., Wang, S.C., Gao, N., Ubhi, H.S., Xu, C. and Langdon, T.G., (2006) An EBSD study of texture and grain boundary evolution in a strongly textured aluminium alloy during ECA pressing Horita, Zenji (ed.) In Nanomaterials by Severe Plastic Deformation. Trans Tech., pp. 937-942.

Starink, Marco J., Cheng, Xiaoyu and Yang, Shoufeng (2012) Hardening of pure metals by high pressure torsion: a physically-based model employing volume averaged defect evolutions Acta Materialia, 61, (1), pp. 183-192. (doi:10.1016/j.actamat.2012.09.048).

Steenson, Leo V. (2013) Experimentally verified model predictive control of a hover-capable AUV University of Southampton, Faculty of Engineering and the Environment, Doctoral Thesis , 281pp.

Stephen, N. (2006) On the maximum power transfer theorem within electromechanical systems Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 220, (8), pp. 1261-1267. (doi:10.1243/09544062JMES304).

Stephen, N.G. (2004) State space elastostatics of prismatic structures International Journal of Mechanical Sciences, 46, (9), pp. 1327-1347. (doi:10.1016/j.ijmecsci.2004.07.008).

Stephen, N.G. (2006) On energy harvesting from ambient vibration Journal of Sound and Vibration, 293, (1-2), pp. 409-425. (doi:10.1016/j.jsv.2005.10.003).

Stephen, N.G. (2006) Transfer matrix analysis of the elastostatics of one-dimensional repetitive structures Proceedings of the Royal Society of London A, 462, (2072), pp. 2245-2270. (doi:10.1098/rspa.2006.1669).

Stephen, N.G. (2007) Macauley's method for a Timoshenko beam International Journal of Mechanical Engineering, 35, (4), pp. 285-292.

Stephen, N.G. (2007) On the Ostrogradski instability for higher-order derivative theories and a pseudo-mechanical energy [in special issue: EUROMECH Colloquium 484 on Wave Mechanics and Stability of Long Flexible Structures Subject to Moving Loads and Flows] Journal of Sound and Vibration, 310, (3), pp. 729-739. (doi:10.1016/j.jsv.2007.04.019).

Stephen, N.G. (2008) On state-space elastostatics within a plane stress sectorial domain: the wedge and the curved beam International Journal of Solids and Structures, 45, (20), pp. 5437-5463. (doi:10.1016/j.ijsolstr.2008.05.023).

Stephen, N.G. (2009) On amplitude build-up at resonance International Journal of Mechanical Engineering, 37, (3), pp. 1-8.

Stephen, N.G. and Ghosh, S. (2005) Eigenanalysis and continuum modelling of a curved repetitive beam-like structure International Journal of Mechanical Sciences, 47, (12), pp. 1854-1873. (doi:10.1016/j.ijmecsci.2005.07.001).

Stephen, N.G. and Wang, P.J. (1996) Saint-Venant's principle and the anti-plane elastic wedge The Journal of Strain Analysis for Engineering Design, 31, (3), pp. 231-234.

Stephen, N.G. and Wang, P.J. (1996) Saint-Venant decay rates: a procedure for the prism of general cross-section Computers & Structures, 58, (6), pp. 1059-1066. (doi:10.1016/0045-7949(95)00237-5).

Stephen, N.G. and Wang, P.J. (1996) On Saint-Venant's principle in pin-jointed frameworks International Journal of Solids and Structures, 33, (1), pp. 79-97. (doi:10.1016/0020-7683(95)00019-7).

Stephen, N.G. and Wang, P.J. (1999) Saint-Venant's principle and the plane elastic wedge International Journal of Solids and Structures, 36, (3), pp. 345-361. (doi:10.1016/S0020-7683(98)00027-4).

Stephen, N.G. and Wang, P.J. (2004) Saint-Venant decay rates for the rectangular cross section rod Journal of Applied Mechanics, 71, (3), pp. 429-433. (doi:10.1115/1.1687794).

Stephen, N.G. and Zhang, Y. (2004) Eigenanalysis and continuum modelling of an asymmetric beam-like repetitive structure International Journal of Mechanical Sciences, 46, (8), pp. 1213-1231. (doi:10.1016/j.ijmecsci.2004.07.012).

Stephen, N.G. and Zhang, Y. (2006) Eigenanalysis and continuum modelling of pre-twisted repetitive beam-like structures International Journal of Solids and Structures, 43, (13), pp. 3832-3855. (doi:10.1016/j.ijsolstr.2005.05.023).

Stevens, Nia, Shrimpton, John, Palmer, Mark, Prime, Dave and Johal, Bal (2007) Accuracy assessments for laser diffraction measurements of pharmaceutical lactose Measurement Science and Technology, 18, (12), pp. 3697-3706. (doi:10.1088/0957-0233/18/12/004).

Stokes, B., Gao, N. and Reed, P.A.S. (2007) Effects of graphite nodules on crack growth behaviour of austempered ductile iron Materials Science and Engineering: A, 445-446, pp. 374-385. (doi:10.1016/j.msea.2006.09.058).

Stokes, B. and Reed, P.A.S. (2000) Fatigue analysis of austempered ductile iron suitable for automotive camshaft applications At Proceedings of 6th Postgraduate Conference in Engineering Materials. 06 Oct 2000. , pp. 15-16.

Strickland, M.A. and Taylor, M. (2009) In-silico wear prediction for knee replacements - methodology and corroboration Journal of Biomechanics, 42, (10), pp. 1469-1474. (doi:10.1016/j.jbiomech.2009.04.022). (PMID:19464013).

Strickland, Michael A., Browne, Martin and Taylor, Mark (2009) Could passive knee laxity be related to active gait mechanics? An exploratory computational biomechanical study using probabilistic methods Computer Methods in Biomechanics and Biomedical Engineering, 12, (6), pp. 709-720. (doi:10.1080/10255840902895994). (PMID:19418316).

Strickland, Michael A. and Taylor, Mark (2010) Analysing ‘lift-off’ events during knee wear testing At European Society of Biomechanics, United Kingdom. 1 pp.

Su, Y.H., Chen, K.S., Roberts, D.C. and Spearing, S.M. (2001) Large deflection analysis of a pre-stressed annular plate with a rigid boss under axisymmetric loading Journal of Micromechanics and Microengineering, 11, (6), pp. 645-653. (doi:10.1088/0960-1317/11/6/305).

Su, Y.H. and Spearing, S.M. (2004) Nonlinear buckling of microfabricated thin annular plates Thin-Walled Structures, 42, (11), pp. 1543-65. (doi:10.1016/j.tws.2004.05.006).

Sultan, M.T.H., Worden, K., Dulieu-Barton, J.M., Staszewski, W.J, Hodzic, A. and Pierce, S.G. (2009) Identification of impact damage in CRRP laminates using the NDT approach At AEROTECH III: Advances in Aerospace Engineering. 18 - 19 Nov 2009. 6 pp.

Sultan, M.T.H., Worden, K., Staszewski, W.J., Pierce, S.G., Dulieu-Barton, J.M. and Hodzic, A. (2009) Impact damage detection and quantification in CFRP laminates; a precursor to machine learning At 7th International Workshop on Structural Health Monitoring. 09 - 11 Sep 2009. 11 pp.

Sun, W., McBride, John and Hill, M. (2006) Bias and uncertainty of the nonlinear least-squares sphere fitting algorithm to small segment angle surfaces At Proceedings 6th International Euspen Conference. 01 May 2006. , pp. 496-499.

Sun, Wenjuan, McBride, John W. and Hill, Martyn (2006) The application of 3D optical scanning systems for the measurement of spherical and aspheric surfaces At American Society for Precision Enginnering (ASPE 2006). 01 Jan 2006.

Sun, Zhe, Djidjeli, K., Xing, J.T. and Javed, A. (2014) Some modifications of MPS method for incompressible free surface flow At WCCM XI: 11th World Conference on Computational Mechanics, Spain. 20 - 25 Jul 2014. 12 pp.

Sun, Zhe, Djidjeli, K., Xing, Jing and Cheng, Fai (2015) Modified MPS method for the 2D Fluid structure interaction problem with free surface Computers & Fluids, pp. 1-64. (doi:10.1016/j.compfluid.2015.08.017).

Sutcliffe, M.P.F., Monroy Acevesa, C., Stronge, W.J., Choudhury, R.S., Wright, P. and Scott, A.E. (2012) Moderate speed impact damage to 2D-braided glass–carbon composites Composite Structures, 94, (5), pp. 1781-1792. (doi:10.1016/j.compstruct.2011.12.026).

Sutton, Daniel, Limbert, Georges, Burdett, Bary and Wood, R.J.K. (2013) Interpreting the effects of interfacial chemistry on the tribology of diamond-like carbon coatings against steel in distilled water [in special issue: Wear of Materials 2013] Wear, 302, (1-2), pp. 918-928. (doi:10.1016/j.wear.2013.01.089).

Suvarna, R., Arumugam, V., Bull, D.J., Chambers, A.R. and Santulli, C. (2014) Effect of temperature on low velocity impact damage and post-impact flexural strength of cfrp assessed using ultrasonic c-scan and micro-focus computed tomography Composites Part B: Engineering, 1- 22. (doi:10.1016/j.compositesb.2014.04.028).

Svensson, Jonas L., Mace, Brian and Rustighi, Emiliano (2010) On the design of hybrid active-passive piezoelectric vibration damping At 39th International Congress on Noise Control Engineering 2010 (INTER-NOISE 2010), Portugal. 13 - 16 Jun 2010.

Swingler, J. (2009) Enhancing connector reliability using conducting polymer materials for minimising fretting on electrical contact interfaces Materials & Design, 30, (10), pp. 3935-3942. (doi:10.1016/j.matdes.2009.06.004).

Swingler, J. and Lalechos, A. (2009) Visualisation and the size distribution of contact spots at a real un-dismantled electrical contact interface Journal of Physics D: Applied Physics, 42, (8), 085304-[7pp]. (doi:10.1088/0022-3727/42/8/085304).

Swingler, J. and McBride, J.W. (1999) The net zero mass loss phenomenon on opening switching contacts with AC loading IEEE Transactions on Components and Packaging Technologies, 22, (1), pp. 27-37. (doi:10.1109/6144.759350).

Swingler, J. and McBride, J.W. (2004) Micro-arcing and arc erosion minimisation using a 42 volt DC hybrid switching devices In Proceedings of the 50th IEEE Holm Conference on Electrical Contacts and the 22nd International Conference on Electrical Contacts, 2004. Institute of Electrical and Electronics Engineers. 7 pp, pp. 1-7. (doi:10.1109/HOLM.2004.1353086).

Swingler, J. and McBride, J.W. (2008) Micro-arcing and arc erosion minimization using a DC hybrid switching device IEEE Transactions on Components and Packaging Technologies, 31, (2), pp. 425-430. (doi:10.1109/TCAPT.2008.921640).

Swingler, J. and McBride, J.W. (2008) Micro-arcing and arc erosion minimization using a 42 volt DC hybrid switching device IEEE Transactions on Components and Packaging Technologies, 31, (2), pp. 425-430. (doi:10.1109/TCAPT.2008.921640).

Swingler, John W. and McBride, Jonathan (2002) Fretting in connector terminals using conducting polymer contacts At International Session of Electro-Mechanical Devices 2002 (IS-EMD 2002). 14 - 15 Nov 2002. 6 pp.

Swingler, Jonathan and Sumption, Alan (2010) Arc erosion of AgSnO2 electrical contacts at different stages of a break operation Rare Metals (doi:10.1007/s12598-009-XXX).

Swolfs, Y., Morton, H., Scott, A.E., Gorbatikh, L., Reed, P.A.S., Sinclair, I., Spearing, S.M. and Verpoest, I. (2015) Synchrotron radiation computed tomography for experimental validation of a tensile strength model for unidirectional fibre-reinforced composites Composites Part A Applied Science and Manufacturing, 77, pp. 106-113. (doi:10.1016/j.compositesa.2015.06.018).

Symonds, N. and Mellor, B.G. (1998) Polymeric coatings for impact and wear resistance At The Mission of Tribology Research 7, United Kingdom.

Symonds, N. and Mellor, B.G. (1999) Polymeric coatings for impact and wear resistance: I: wear Wear, 225-229, (1), pp. 111-118. (doi:10.1016/S0043-1648(98)00353-6).

Symonds, Nicola (2000) Polymeric coatings for wireline wear and impact resistance University of Southampton, School of Engineering Sciences, Doctoral Thesis , 306pp.

Syngellakis, S. (1998) Stability In, Aliabadi, M.H. (eds.) Plate Bending Analysis With Boundary Elements. Ashurst, UK, Computational Mechanics pp. 309-533. (Advances in Boundary Elements, 184, 2).

Syngellakis, S. (1998) A boundary element scheme for plate post-buckling analysis In, Brebbia, C.A. (eds.) Boundary Element Research in Europe. Ashhurst, UK, Computational Mechanics pp. 305-316. (Modelling and Simulation, 20).

Szabó, M.E., Zekonyte, J., Katsamenis, O.L., Taylor, M and Thurner, P.J. (2011) Similar damage initiation but different failure behavior in trabecular and cortical bone tissue [in special issue: Soft Tissues — Special Issue Section on Soft Tissue 3d Strain] Journal of the Mechanical Behavior of Biomedical Materials, 4, (8), pp. 1787-1796. (doi:10.1016/j.jmbbm.2011.05.036). (PMID:22098878).

Sztipanovits, Janos, Biswas, Gautam, Frampton, Ken, Gokhale, Aniruddha, Howard, Larry, Karsai, Gabor, Koo, T. John, Koutsoukos, Xenofon and Schmidt, Douglas C., Burns, Alan and Sangiovanni-Vincentelli, Alberto(eds.) (2005) Introducing embedded software and systems education and advanced learning technology in an engineering curriculum. [Special issue on university education] ACM Transactions on Embedded Computing Systems (TECS), 4, (3), pp. 549-568. (doi:10.1145/1086519.1086524).

Sóbester, András and Keane, Andy J. (2002) Empirical comparisons of gradient-based methods on an engine-inlet shape optimization problem In Proceedings of the 9th AIAA/ISSMO Symposium on Multidisciplinary Analysis and Optimization. American Institute of Aeronautics and Astronautics. 11 pp.

Taddei, F., Palmadori, I., Taylor, W.R., Heller, M.O., Bordini, B., Toni, A. and Schileo, E. (2014) European Society of Biomechanics S.M. Perren Award 2014: Safety factor of the proximal femur during gait: A population-based finite element study. Journal of Biomechanics, 47, (17), pp. 3433-3440. (doi:10.1016/j.jbiomech.2014.08.030). (PMID:25280759).

Taher, S.T., Thomsen, O.T., Dulieu-Barton, J.M. and Zhang, S. (2011) Determination of mechanical properties of PVC foam using a modified Arcan fixture [in special issue: CompTest 2011] Composites Part A: Applied Science and Manufacturing, 43, (10), pp. 1678-1708. (doi:10.1016/j.compositesa.2011.11.010).

Takeda, Kenji and Newman, Simon J. (2003) Flying high at university: flight simulation in the lecture theatre At Royal Aeronautical Society - Ballantyne Lecture 2003: Flight Simulation - Just a Game?. 01 Feb 2003.

Tan, A.C.H., Meurers, T., Veres, S.M., Aglietti, G. and Rogers, E. (2005) Robust control of microvibrations with experimental verification Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 219, (5), pp. 435-460. (doi:10.1243/095440605X16929).

Tan, Mingyi, Xiong, Ye Ping and Xing, Jing Tang (2009) Dynamic response analysis of an onshore LNG-storage tank interaction system sub-ject to impact or earthquake loads In Proceedings of the Sixteenth International Congress on Sound and Vibration - ICSV16. International Institute of Acoustics and Vibration, (IIAV). 8 pp, pp. 1-8.

Tao, Jingmei, Chen, Guangming, Jian, Weiwei, Wang, Jun, Zhu, Yuntian, Zhu, Xinkun and Langdon, Terence G. (2015) Anneal hardening of a nanostructured Cu–Al alloy processed by high-pressure torsion and rolling Materials Science and Engineering: A, 628, pp. 207-215. (doi:10.1016/j.msea.2015.01.055).

Tao, T. and Frampton, K.D. (2004) Decentralized vibration control with networked embedded systems In 2004 Proceedings of the ASME International Mechanical Engineering Congress & Exposition. American Society of Mechanical Engineers..

Tasbaz, O.D., Wood, R.J.K., Browne, M., Powrie, H.E.G. and Denuault, G. (1999) Electrostatic monitoring of oil lubricated sliding point contacts for early detection of scuffing Wear, 230, (1), pp. 86-97. (doi:10.1016/S0043-1648(98)00420-7).

Taylor, M. (2004) Finite element analysis of total knee replacement At The 14th European Society of Biomechanics (ESB) conference. 04 - 07 Jul 2004.

Taylor, M. (2006) Finite element modelling of the resurfaced femoral head Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 220, (2), pp. 289-297. (doi:10.1243/095441105X9363).

Terrazas-Rodríguez, J.E., Gutiérrez-Granados, S., Alatorre-Ordaz, M.A., Ponce de Leon, C. and Walsh, F.C. (2011) A comparison of the electrochemical recovery of palladium using a flat plate flow-by reactor and a rotating cylinder electrode reactor Electrochimica Acta, 56, (25) (doi:10.1016/j.electacta.2011.08.021).

Thakare, M.R., Wharton, J.A., Wood, R.J.K. and Menger, C. (2007) Exposure effects of alkaline drilling fluid on the microscale abrasion–corrosion of WC-based hardmetals Wear, 263, (1-6), pp. 125-136. (doi:10.1016/j.wear.2006.12.047).

Thakare, M.R., Wharton, J.A., Wood, R.J.W. and Menger, C. (2009) Investigation of micro-scale abrasion-corrosion of WC-based sintered hardmetal and sprayed coating using in situ electrochemical current-noise measurements [in special issue: ICAP 2008] Wear, 267, (11), pp. 1967-1977. (doi:10.1016/j.wear.2009.06.006).

Thew, M.T. and Smyth, I.C. (1998) Development and performance of oil-water hydrocyclone separators: a review In Proceedings of IMM Conference on Innovation in Physical Separation Technologies. Institute of Materials, Minerals and Mining., pp. 77-89.

Thite, A.N. and Thompson, D.J. (2000) Further study of indirect force determination and transfer path analysis using numerical simulations for a flat plate University of Southampton, Institute of Sound and Vibration Research 76pp. , Southampton, UK (ISVR Technical Memorandum, 854).

Thite, A.N. and Thompson, D.J. (2000) Study of regularized solutions to improve the indirect force determination and transfer path analysis using numerical simulations for a flat plate University of Southampton, Institute of Sound and Vibration Research 49pp. , Southampton, UK (ISVR Technical Memorandum, 855).

Thite, A.N. and Thompson, D.J. (2000) Study of indirect force determination and transfer path analysis using numerical simulations for a flat plate University of Southampton, Institute of Sound and Vibration Research 125pp. , Southampton, UK (ISVR Technical Memorandum, 851).

Thompson, D.J. and Jones, C.J.C. (2000) Using theoretical models to design low-noise wheels and track In, Sustainability and Environmental Concerns in Transportation. 79th Annual Meeting of the Transportation Research Board London, Transportation Research Board pp. 51-56. (Transportation Research Board: Journal of the Transportation Research Board, 1702).

Thompson, D.J. and Jones, C.J.C. (2000) Using theoretical models to design low noise wheels and track. Paper 00-396 At Proceedings of 79th Annual Meeting of the Transportation Research Board. 10 pp, 10pp.

Thompson, D.J. and Jones, C.J.C. (2000) A review of the modelling of wheel/rail noise generation Journal of Sound and Vibration, 231, (3), pp. 519-536. (doi:10.1006/jsvi.1999.2542).

Thompson, D.J. and Jones, C.J.C. (2002) A study of the use of vehicles with small wheels for determining the component of noise from the track Proceedings of the Institute of Acoustics, 24, (2)

Thompson, D.J., Jones, C.J.C. and Ferguson, N.S. (2000) Reducing noise from freight vehicles Proceedings of Freight Vehicle Design Workshop, Manchester Metropolitan University, Manchester, UK, April 2000, [ 11pp].

Thompson, D.J., Jones, C.J.C. and Turner, N. (2003) Investigation into the validity of two-dimensional models for sound radiation from waves in rails Journal of the Acoustical Society of America, 113, (4, Pt 1), pp. 1965-1974. (doi:10.1121/1.1555612).

Thompson, D.J., Jones, C.J.C. and Waters, T.P., (2000) The development of a tuned damper for reducing noise from railway track Ferguson, N.S., Wolfe, H.F., Ferman, M.A. and Rizzi, S.A. (eds.) In Proceedings of the 7th International Conference on Recent Advances in Structural Dynamics, Southampton. University of Southampton, Institute of Sound and Vibration., pp. 567-578.

Thomsen, O.T. and Kratmann, K.K. (2010) Experimental characterisation of parameters controlling the compressive failure of pultruded unidirectional carbon fibre composites In, Mines, R.A.W. and Dulieu-Barton, J.M. (eds.) Advances in Experimental Mechanics VII. Zurich, Switzerland, Trans Tech pp. 15-22. (Applied Mechanics and Materials, 24-25). (doi:10.4028/www.scientific.net/AMM.24-25.15).

Thornton, B., Ura, T., Nose, Y. and Turnock, S.R. (2006) Development of Zero-G Underwater Robots:Unrestricted attitude control using control moment gyros Seisan-Kenkyu, 58, (2), pp. 175-178.

Thurner, Philipp J. and Katsamenis, Orestis L. (2014) Measuring forces between structural elements in composites: from macromolecules to bone In, DiMasi, Elaine and Gower, Laurie B. (eds.) Biomineralization Sourcebook: Characterization of Biominerals and Biomimetic Materials. Boca Raton, US, CRC Press p. 321.

Thurner, Philipp J., Katsamenis, Orestis L., Nobakhti, Sabah, Andriotis, Orestis, Chong, Harold M.H. and Limbert, Georges (2012) Microstructure, interfaces, composition: towards better microscale experimentation and models of bone At 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS), Austria. 10 - 14 Sep 2012. 2 pp.

Tian, Guochang, Xiong, Y.P. and Song, Kongjie (1995) Optimum design and structure-borne sound control for a complicated resilient system Acta Acustica, 20, pp. 45-53.

Tischer, A., den Boer, E., Williams, I.D. and Curran, A. (2014) Industrial network design by improving construction logistics Proceedings of the ICE - Waste and Resource Management, 167, (WR2), pp. 82-94. (doi:10.1680/warm.13.00025).

Todorovic Fabro, A., Ferguson, N.S., Mace, B.R., Gan, J.M., Bickerton, S. and Battley, M. (2015) Estimation of random field material properties for chopped fibre composites and application to vibration modelling Composite Structures, 125, pp. 1-12. (doi:10.1016/j.compstruct.2015.01.036).

Townsend, Nicholas C. and Shenoi, Ramanand A. (2011) Gyrostabilizer vehicular technology Applied Mechanics Reviews, 64, (1), 010801 -[14pp]]. (doi:10.1115/1.4004837).

Townsend, R.J., Hill, M., Harris, N.R., Martin, S.P., Kuznetsova, L.A., Borthwick, K.A.J. and Coakley, W.T. (2006) Simulation and design of an acoustic resonator to enhance the sensing of cells within micro-fluidic chambers, In 17th MicroMechanics Europe (MME06). MME., pp. 193-196.

Townsend, R.J., Hill, M., Harris, N.R. and White, N.M. (2006) Particle manipulation using acoustic radiation forces At Institute of Acoustics Spring Conference 2006. 03 - 04 Apr 2006. , pp. 851-857.

Townsend, R.J., Hill, M., Harris, N.R., White, N.M., Beeby, S.P. and Wood, R.J.K (2005) Fluid modelling of microfluidic separator channels Sensors and Actuators B: Chemical, 111-112, pp. 455-462. (doi:10.1016/j.snb.2005.03.035).

Trimarchi, Daniele, Vidrascu, M, Taunton, D.J., Turnock, S.R. and Chapelle, D. (2012) Wrinkle development analysis in thin sail-like structures using MITC shell finite elements Finite Elements in Analysis and Design, 64, pp. 48-64. (doi:10.1016/j.finel.2012.09.005).

Turangan, C.K., Jamaluddin, A.R., Ball, G.J. and Leighton, T.G. (2008) Free-Lagrange simulations of the expansion and jetting collapse of air bubbles in water Journal of Fluid Mechanics, 598, pp. 1-25. (doi:10.1017/S0022112007009317).

Turner, John D. and Hill, Martyn (1999) Instrumentation for engineers and scientists, Oxford, UK, Oxford University Press, 204pp. (Textbooks in Electrical and Electronic Engineering, 8).

Tutty, O.R., Hackenberg, P. and Nelson, P.A. (2000) Gradient-based control and optimization of boundary layer transition Proceedings of the I MECH E Part I Journal of Systems & Control Engineering, 214, (5), pp. 347-359.

Underwood, J. (2013) Strength assessment of damaged steel ship structures University of Southampton, Faculty of Engineering and the Environment, Doctoral Thesis , 207pp.

Underwood, J.M., Sobey, A.J., Blake, J.I.R and Shenoi, R.A. (2015) Ultimate collapse strength assessment of damaged steel plated grillages Engineering Structures, 99, pp. 517-535.

Underwood, J.M., Sobey, Adam J., Blake, J.I.R. and Shenoi, R.A. (2012) Ultimate collapse strength assessment of damaged steel-plated structures Engineering Structures, 38, pp. 1-10. (doi:10.1016/j.engstruct.2011.12.045).

Urry, Stephen R. (2002) Pressure distribution beneath the foot in sideslope walking University of Southampton, School of Engineering Sciences, Doctoral Thesis , 174pp.

Van Schaik, Jeroen, Scanlan, Jim, Keane, Andy and Gorissen, Dirk (2011) Improving design rationale capture during embodiment design In Proceedings of the 18th International Conference on Engineering Design. Technical University of Denmark., pp. 436-445.

Vaughan, A.S., Green, C.D., Hosier, I.L., Stevens, G.C., Pye, A., Thomas, J.L., Sutton, S.J. and Guessens, T. (2015) Thermoplastic high performance cable insulation systems for flexible system operation At 2015 IEEE Electrical Insulation Conference (EIC), United States. 07 - 10 Jun 2015. , pp. 543-546.

Veres, Sandor M. (2006) A robust approximation scheme for the LQG control of an undamped flexible beam with a tip mass European Journal of Control, 12, (6)

Veres, Sandor M., (2010) Mission capable autonomous control systems in the oceans, in the air and in space Hanazawa, Akitoshi, Miki, Tsutom and Horio, Keiichi (eds.) In Brain-Inspired Information Technology. Springer. 180 pp, pp. 1-10. (doi:10.1007/978-3-642-04025-2).

Verschuur, Carl, Boland, Conor, Frost, Emily and Constable, Jack (2013) The role of first formant information in simulated electro-acoustic hearing Journal of the Acoustical Society of America, 133, (6), pp. 4279-4289. (doi:10.1121/1.4803910).

Vitanov, V.I. and Voutchkov, I.I. (2005) Process parameters selection for friction surfacing applications using intelligent decision support Journal of Materials Processing Technology, 159, (1), pp. 27-32. (doi:10.1016/j.jmatprotec.2003.11.006).

Vitu, T, Escudeiro, A, Polcar, T. and Cavaleiro, A (2014) Sliding properties of Zr-DLC coatings: the effect of tribolayer formation Surface and Coatings Technology, 258, pp. 734-745. (doi:10.1016/j.surfcoat.2014.08.003).

Voide, Romain, Van Lenthe, G. Harry, Schneider, Philipp, Thurner, Philipp J., Wyss, Peter, Sennhauser, Urs, Stampanoni, Marco, Stauber, Martin, Snedeker, Jess and Müller, Ralph (2006) Functional microimaging: an integrated approach for advanced bone biomechanics and failure analysis In, Manduca, Armando and Amini, Amir A. (eds.) Medical Imaging 2006: Physiology, Function, and Structure from Medical Images. Bellingham, US, International Society for Optical Engineering 61430X-[12pp]. (Proceedings of SPIE, 6143). (doi:10.1117/12.650485).

Vorobev, A., Lyubimov, D., Lyubimova, T., Mojtabi, Abdelkader and Zappoli, Bernhard (2004) Validation of averaged equations for thermal vibrational convection in near-critical fluids Comptes Rendus Mécanique, 332, (10), pp. 803-809. (doi:10.1016/j.crme.2004.05.003).

Voutchkov, I. and Keane, A.J. (2006) Multiobjective optimization using surrogates At Adaptive Computing in Design and Manufacture 2006 (ACDM 2006). 25 - 27 Apr 2006. 9 pp, pp. 167-175.

Walker, J.C., Kamps, T.J. and Wood, R.J.K. (2013) The influence of start-stop velocity cycling on the friction and wear behaviour of a hyper-eutectic Al-Si automotive alloy Wear, 306, (1-2), pp. 209-218. (doi:10.1016/j.wear.2012.11.007).

Walker, S.J.I. and Aglietti, G.S. (2007) Modeling the hinge moment of skew mounted tape spring folds Journal of Aerospace Engineering, 20, (2), pp. 102-115. (doi:10.1061/(ASCE)0893-1321(2007)20:2(102)).

Walker, S.J.I., Aglietti, G.S. and Cunningham, P.R. (2008) Low frequency damping of metal panels in ambient Air Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 222, (C8), pp. 1413-1420. (doi:10.1243/09544062JMES850).

Walker, Scott J.I., Aglietti, Guglielmo S. and Cunningham, Paul (2008) A study of the damping linearity of jointed metal plates AIAA Journal, 46, (7), pp. 1738-1746. (doi:10.2514/1.34323).

Walker, Scott J.I., Aglietti, Guglielmo S. and Cunningham, Paul R. (2006) Experimental analysis of damping across joints in metal plates Applied Mechanics and Materials, 5-6, pp. 391-398. (doi:10.4028/www.scientific.net/AMM.5-6.391).

Walker, Scott J.I., Aglietti, Guglielmo S. and Cunningham, Paul R. (2006) Determining the damping factors for jointed metal plates In Proceedings of the 9th International Conference on Recent Advances in Structural Dynamics. University of Southampton, Institute of Sound and Vibration Research..

Wallace, M., Azzam, H. and Newman, S. (2004) Indirect approaches to individual aircraft structural monitoring Journal of Aerospace Engineering, 218, (5), pp. 329-346. (doi:10.1243/0954410042467059).

Walsh, S.J., Robinson, I. and Stimpson, G. European Acoustics Associaton (2003) Alternator Tonal Noise Target Setting Acta Acustica united with Acustica, 89, (3), pp. 451-459.

Walters, D.S. and Spearing, S.M. (2000) On the flexural creep of single crystal silicon Scripta Materialia, 42, (8), pp. 769-774. (doi:10.1016/S1359-6462(99)00428-5).

Wang, C.Q., Xiong, J.J., Shenoi, R.A., Liu, M.D. and Liu, J.Z. (2015) A modified model to depict corrosion fatigue crack growth behavior for evaluating residual lives of aluminum alloys International Journal of Fatigue, 83, part 2, pp. 280-287. (doi:10.1016/j.ijfatigue.2015.10.023).

Wang, Chuan Ting, Gao, Nong, Gee, Mark G, Wood, Robert J.K. and Langdon, Terence G. (2012) Tribology testing of ultrafine-grained Ti processed by high pressure torsion with subsequent coating Journal of Materials Science, 48, pp. 4742-4748. (doi:10.1007/s10853-012-7110-y).

Wang, Gongxian, Xiong, Yeping and Tang, Wenzhi (2013) A novel heavy-weight shock test machine for simulating underwater explosive shock environment: mathematical modeling and mechanism analysis International Journal of Mechanical Sciences, 77, pp. 239-248. (doi:10.1016/j.ijmecsci.2013.09.006).

Wang, H., Xing, J.T., Price, W.G. and Li, W. (2008) An investigation of an active landing gear system to reduce aircraft vibrations caused by landing impacts and runway excitations Journal of Sound and Vibration, 317, (1-2), pp. 50-66. (doi:10.1016/j.jsv.2008.03.016).

Wang, L., Hope, A.D. and Sadek, H. (2001) Fault diagnosis using artificial neural networks for waste water pump bearings At International Conference on Condition Monitoring. 25 - 27 Jun 2001. , pp. 291-299.

Wang, L. and Wood, R.J.K. (2007) The influence of contact conditions on surface reaction layers formed between steel surfaces lubricated by an aviation oil Tribology International, 40, (10-12), pp. 1655-1666. (doi:10.1016/j.triboint.2007.02.014).

Wang, L., Wood, R.J.K., Harvey, T.J. and Powrie, H.E.G. (2007) Electrostatic charge – a novel condition monitoring technology Condition Monitor, 248, pp. 5-9.

Wang, Leran, Toal, David J.J., Keane, A.J. and Stanley, Felix (2014) An accelerated medial object transformation for whole engine optimisation At ASME Turbo Expo 2014; Turbine Technical Conference and Exposition, Germany. 16 - 20 Jun 2014.

Wang, Ling (2014) Use of structured surfaces for friction and wear control on bearing surfaces Surface Topography: Metrology and Properties, 2, (4) (doi:10.1088/2051-672X/2/4/043001).

Wang, Liping, Wan, Shahong, Wang, Shuncai, Wood, R.J.K. and Xue, Q.J. (2010) Gradient DLC-Based nanocomposite coatings as a solution to improve tribological performance of aluminum alloy Tribology letters, 38, (2), pp. 155-160. (doi:10.1007/s11249-010-9585-5).

Wang, Meng, Angland, David and Zhang, Xin (2016) Dataset for: The Noise Generated by A Landing Gear Wheel with Hub and Rim Cavities Journal of Sound and Vibration doi:10.5258/SOTON/403575 [Dataset]

Wang, Qianzhi, Wu, Zhiwei, Zhou, Fei, Huang, Hu, Niitsu, Keiichiro and Yan, Jiwang (2015) Evaluation of crack resistance of CrSiCN coatings as a function of Si concentration via nanoindentation Surface and Coatings Technology, 272, pp. 239-245. (doi:10.1016/j.surfcoat.2015.04.001).

Wang, Qianzhi, Wu, Zhiwei, Zhou, Fei and Yan, Jiwang (2015) Comparison of crack resistance between ternary CrSiC and quaternary CrSiCN coatings via nanoindentation Materials Science and Engineering: A, 642, pp. 391-397. (doi:10.1016/j.msea.2015.07.024).

Wang, Qianzhi, Zhou, Fei, Chen, Kangmin, Wang, Meiling and Qian, Tao (2010) Friction and wear properties of TiCN coatings sliding against SiC and steel balls in air and water At 5th International Conference on Technological Advances of Thin Films & Surface Coatings, China. 11 - 14 Jul 2010.

Wang, Qianzhi, Zhou, Fei, Chen, Kangmin, Wang, Meiling and Qian, Tao (2011) Friction and wear properties of TiCN coatings sliding against SiC and steel balls in air and water [in special issue: 5th International Conference on Technological Advances of Thin Films & Coatings] Thin Solid Films, 519, (15), pp. 4830-4841. (doi:10.1016/j.tsf.2011.01.038).

Wang, Qianzhi, Zhou, Fei, Ding, Xiangdong, Zhou, Zhifeng, Wang, Chundong, Zhang, Wenjun, Li, Lawrence Kwok-Yan and Lee, Shuit-Tong (2013) Microstructure and water-lubricated friction and wear properties of CrN(C) coatings with different carbon contents Applied Surface Science, 268, pp. 579-587. (doi:10.1016/j.apsusc.2013.01.027).

Wang, Qianzhi, Zhou, Fei, Ding, Xiangdong, Zhou, Zhifeng, Wang, Chundong, Zhang, Wenjun, Li, Lawrence Kwok-Yan and Lee, Shuit-Tong (2013) Structure and water-lubricated tribological properties of Cr/a-C coatings with different Cr contents Tribology International, 67, pp. 104-115. (doi:10.1016/j.triboint.2013.07.002).

Wang, Qianzhi, Zhou, Fei, Ding, Xiangdong, Zhou, Zhifeng, Zhang, Wenjun, Li, Lawrence Kwok-Yan and Lee, Shuit-Tong (2013) Influences of ceramic mating balls on the tribological properties of Cr/a-C coatings with low chromium content in water lubrication Wear, 303, (1-2), pp. 354-360. (doi:10.1016/j.wear.2013.03.044).

Wang, Qianzhi, Zhou, Fei, Gao, Song, Zhou, Zhifeng, Li, Lawrence Kwok-Yan and Yan, Jiwang (2015) Effect of counterparts on the tribological properties of TiCN coatings with low carbon concentration in water lubrication Wear, 328-329, pp. 356-362. (doi:10.1016/j.wear.2015.03.007).

Wang, Qianzhi, Zhou, Fei, Wang, Chundong, Yuen, Muk-Fung, Wang, Meiling, Qian, Tao, Matsumoto, Mitsuhiro and Yan, Jiwang (2015) Comparison of tribological and electrochemical properties of TiN, CrN, TiAlN and a-C:H coatings in simulated body fluid Materials Chemistry and Physics, 158, pp. 74-81. (doi:10.1016/j.matchemphys.2015.03.039).

Wang, Qianzhi, Zhou, Fei, Wang, Xiaonan, Chen, Kangmin, Wang, Meiling, Qian, Tao and Li, Yanxia (2011) Comparison of tribological properties of CrN, TiCN and TiAlN coatings sliding against SiC balls in water Applied Surface Science, 257, (17), pp. 7813-7820. (doi:10.1016/j.apsusc.2011.04.035).

Wang, Qianzhi, Zhou, Fei, Zhou, Zhifeng, Ding, Xiangdong, Wang, Chundong, Zhang, Wenjun and Li, Lawrence Kwok-Yan (2012) Tribological properties of DLC coatings with varying Cr concentration in water lubrication At The 6th International Conference on Technological Advances of Thin Films & Surface Coatings, Singapore. 14 - 17 Jul 2012.

Wang, Qianzhi, Zhou, Fei, Zhou, Zhifeng, Yang, Yang, Yan, Ce, Wang, Chundong, Zhang, Wenjun, Li, Lawrence Kwok-Yan, Bello, Igor and Lee, Shuit-Tong (2012) Influence of Ti content on the structure and tribological properties of Ti-DLC coatings in water lubrication Diamond and Related Materials, 25, pp. 163-175. (doi:10.1016/j.diamond.2012.03.005).

Wang, Qianzhi, Zhou, Fei, Zhou, Zhifeng, Yang, Yang, Yang, Ce, Wang, Chundong, Zhang, Wenjun, Li, Lawrence Kwok-Yan, Bello, Igor and Lee, Shui-Tong (2012) Influence of carbon content on the microstructure and tribological properties of TiN(C) coatings in water lubrication Surface and Coatings Technology, 206, (18), pp. 3777-3787. (doi:10.1016/j.surfcoat.2012.03.041).

Wang, S.C., Lefebvre, F., Yan, J.L., Sinclair, I. and Starink, M.J. (2006) VPPA welds of Al-2024 alloys: analysis and modelling of local microstructure and strength Materials Science and Engineering: A, 431, (1-2), pp. 123-136. (doi:10.1016/j.msea.2006.05.120).

Wang, W. and Dulieu-Barton, J. M. (2008) Thermoelastic stress analysis of small scale components At Photomechanics 2008. 07 - 09 Jul 2008.

Wang, W., Fruehmann, R.K. and Dulieu-Barton, J.M. (2015) Application of digital image correlation to address complex motions in thermoelastic stress analysis Strain, 51, (5), pp. 405-418. (doi:10.1111/str.12151).

Wang, W., Martakos, G., Dulieu-Barton, J.M., Andreasen, J.H. and Thomsen, O.T. (2015) Fracture behaviour at tri-material junctions of crack stoppers in sandwich structures Composite Structures, 133, pp. 818-833. (doi:10.1016/j.compstruct.2015.07.060).

Wang, W., Shenoi, R. A. and Cui, W. (2006) Delamination buckling of a curved composite beam subjected to a closing bending moment Journal of Ship Mechanics, 10, (6), pp. 102-114.

Wang, W. and Shenoi, R.A. (2003) Delamination modelling of a curved composite beam subjected to an opening bending moment The Journal of Strain Analysis for Engineering Design, 38, (5), pp. 453-457. (doi:10.1243/03093240360713504).

Wang, W. and Shenoi, R.A. (2009) Investigating high strain rate behaviour of unidirectional composites by a visco-elastic model Journal of Ship Mechanics, 13, (3), pp. 406-415.

Wang, W.J., Dulieu-Barton, J. M. and Li, Q. (2010) Assessment of non-adiabatic behaviour in thermoelastic stress analysis of small scale components Experimental Mechanics, 50, pp. 449-461. (doi:10.1007/s11340-009-9249-2).

Wang, Wenjing, Li, Qiang and Barton, Janice (2007) Experimental study of high temperature mechanical and fatigue behaviours of sicp_a356 composites for brake disc At ECCOMAS Thematic Conference on Mechanical Response of Composites. 12 - 14 Sep 2007. 9 pp.

Wang, Xue, Nie, Mengyan, Wang, Chuan Ting, Wang, S.C. and Gao, Nong (2015) Microhardness and corrosion properties of hypoeutectic Al-7Si alloy processed by high-pressure torsion Materials & Design, 83, pp. 193-202. (doi:10.1016/j.matdes.2015.06.018).

Wang, Yikun, Wharton, J.A. and Shenoi, R.A. (2014) Ultimate strength analysis of aged steel-plated structures exposed to marine corrosion damage: a review Corrosion Science, 86, pp. 42-60. (doi:10.1016/j.corsci.2014.04.043).

Wanhill, R.J.H., Symonds, N., Merati, A., Pasang, T. and Lynch, S.P. (2013) Five helicopter accidents with evidence of material and/or design deficiencies Engineering Failure Analysis, 35 (doi:10.1016/j.engfailanal.2012.12.002).

Wankhese, Moresh J., Bressloff, Neil W. and Keane, Andy J. (2011) Combustor design optimization using co-kriging of steady and unsteady turbulent combustion Journal of Engineering for Gas Turbines and Power, 133, (12), 121504 -(11). (doi:10.1115/1.4004155).

Warner, M.B., Novellino, A.N., Astill, S., Maccione, A. and Stokes, M.J. (2008) Reliability of temporal characteristics during reaching tasks using the Motor Task Manager in healthy males At Bioengineering 08: The first in a series of annual meetings to bring together researchers working on bioengineering and biomedical problems. 18 - 19 Sep 2008.

Warwick, David J., Dewbury, K. and Forrester, A.I.J. (2013) Intermittent pneumatic compression. A comparison of femoral vein velocity with five different devices International Angiology, 32, (4), pp. 404-409. (PMID:23822943).

Waters, P.E. (1972) An investigation into the origins of commercial road vehicle noise University of Southampton, Institute of Sound and Vibration Research, Doctoral Thesis , 188pp.

Waters, T.P. (2003) A vibration test of carbon fibre prop shafts University of Southampton, Institute of Sound and Vibration Research 4pp. , Southampton, UK (ISVR Technical Memorandum).

Waugh, R.C. (2014) Development of infrared techniques for practical defect identification in bonded joints University of Southampton, Faculty of Engineering and the Environment, Doctoral Thesis , 209pp.

Weidner, David E., Schwartz, Leonard W. and Eres, Murat H. (1997) Simulation of coating layer evolution and drop formation on horizontal cylinders Journal of Colloid and Interface Science, 187, (1), pp. 243-258. (doi:10.1006/jcis.1996.4711).

Weitzenbock, J.R., Shenoi, R.A. and Wilson, P.A. (1999) Measurement of the principal permeability with the channel flow experiment Polymer Composites, 20, (2), pp. 321-335. (doi:10.1002/pc.10359).

Welsh, A.J.L. (2002) Measurement of peripheral blood flow during whole-body vibration At 37th United Kingdom Conference on Human Responses to Vibration. 18 - 20 Sep 2002. , pp. 76-83.

Welsh, A.J.L. (2003) The effects of push force and vibration magnitude on finger blood flow At 38th United Kingdom Conference on Human Responses to Vibration, Institute of Naval Medicine. 17 - 19 Sep 2003. , pp. 237-246.

Wharton, J.A. and Stokes, K.R. (2007) The influence of nickel-aluminium bronze microstructure and crevice colution on the initiation of crevice corrosion Electrochimica Acta, 53, (5), pp. 2463-2473. (doi:10.1016/j.electacta.2007.10.047).

Wheeler, D.W. and Wood, R.J.K. (1997) Erosion of candidate hard surface coatings for gate valve applications In Proceedings of 8th Annual International Energy Week Conference 1997. PennWell., pp. 33-40.

Wheeler, D.W. and Wood, R.J.K. (1997) Enhanced and novel wear resistant coatings for valve service At Institute of Physics Annual Congress. 01 Jan 1997. , p.83.

Wheeler, D.W. and Wood, R.J.K. (2005) Erosion of hard surface coatings for use in offshore gate valves Wear, 258, (1-4), pp. 526-536. (doi:10.1016/j.wear.2004.03.035).

Wheeler, D.W. and Wood, R.J.K. (2005) Solid particle erosion behaviour of CVD boron phosphide coatings Surface and Coatings Technology, 200, (14-15), pp. 4456-4461. (doi:10.1016/j.surfcoat.2005.03.011).

Wheeler, D.W., Wood, R.J.K., Harrison, D. and Smith, E. (2006) Application of diamond to enhance choke valve life in erosive duties Wear, 261, (10), pp. 1087-1094. (doi:10.1016/j.wear.2006.02.003).

Wheeler, D.W., Wood, R.J.K., Lejeau, D.C. and Mellor, B.G. (1997) The erosion behaviour of CVD diamond and boron carbide coatings At Proceedings of 1st World Tribology Congress. 01 Sep 1997. , p.216.

White, A.S., Adams, R. and Prior, S. (2009) Evaluating choice in universal access: an example from rehabilitation robotics Universal Access in the Information Society, 8, (3), pp. 155-163. (doi:10.1007/s10209-008-0140-1).

White, P.R. and McInerny, S. (2003) A use of the trispectrum in the monitoring of rotating machinery At Internoise 2003. 25 - 28 Aug 2003. 7 pp, pp. 4672-4678.

White, P.R., McInerny, S. and Notley, S. (2003) Nonlinear dynamical measures for the detection of faults in machine condition monitoring At Bifurcations: The Use and Control of Chaos. 28 - 30 Jul 2003. 38 pp.

Wilcox, Clare (1988) Shape optimization of engine structures for low noise University of Southampton, Institute of Sound and Vibration Research, Doctoral Thesis , 214pp.

Wilkinson, M.j. and Joseph, P.F. (2006) Active control of buzz-saw tones: experimental results from a laboratory-scale, no-flow rig Journal of the Acoustical Society of America, 119, (5), pp. 2618-2627. (doi:10.1121/1.2188817).

Wilmshurst, Laurence, Ghandchi Tehrani, Maryam and Elliott, Stephen J. (2012) Receptance method in active vibration control of a nonlinear Duffing oscillator At International Seminar on Modal Analysis (ISMA2012), Belgium. 17 - 19 Sep 2012.

Wilson, P.A. (1985) A review of methods of calculation of added resistance for ships in a seaway Journal of Wind Engineering and Industrial Aerodynamics, 20, (1-3), pp. 187-199. (doi:10.1016/0167-6105(85)90018-2).

Wilson, P.A., Society for Underwater Technology (SUT) (1988) The prediction of manoeuvring characteristics of surface ships in the design spiral In, Jackman, T.J. (eds.) Technology Common to Aero and Marine Engineering. Dordrecht, The Netherlands, Kluwer pp. 233-244. (Advances in Underwater Technology, Ocean Science and Offshore Engineering, 15).

Winden, B., Chen, Mingshen, Okamoto, Naoya, Kim, Do Kyun, McCaig, Elizabeth, Shenoi, R. Ajit and Wilson, P.A. (2013) Investigation of an offshore thermal power plant with carbon capture as an alternative to CO2 transportation Ocean Engineering, 76, pp. 152-162. (doi:10.1016/j.oceaneng.2013.07.016).

Winwood, K., Zioupos, P., Currey, J.D., Cotton, J.R. and Taylor, M. (2006) The importance of the elastic and plastic components of strain in tensile and compressive fatigue of human cortical bone in relation to orthopaedic biomechanics Journal of Musculoskeletal and Neuronal Interactions, 6, (2), pp. 134-141.

Winwood, K., Zioupos, P., Currey, J.D., Cotton, J.R. and Taylor, M. (2006) Strain patterns during tensile, compressive, and shear fatigue of human cortical bone and implications for bone biomechanics Journal of Biomedical Materials Research, Part A, 79A, (2), pp. 289-297. (doi:10.1002/jbm.a.30796).

Wong, M.C.Y. and Shrimpton, J.S. (2004) Drop-charge correlations for polydisperse electrostatically atomized liquid sprays IEEE Transactions on Dielectrics & Electrical Insulation, 11, (2), pp. 362-368. (doi:10.1109/TDEI.2004.1285907).

Wood, R.J.K. (2007) Tribo-corrosion of coatings: a review Journal of Physics D: Applied Physics, 40, (18), pp. 5502-5521. (doi:10.1088/0022-3727/40/18/S10).

Wood, R.J.K., Basumatary, J. and Evans, M.-H. (2013) Energy-related tribo-corrosion research at the National Centre for Advanced Tribology at Southampton In, Tribo-Corrosion: Research, Testing, and Applications. ASTM International pp. 169-202. (Selected Technical Papers, 1563). (doi:10.1520/STP156320120148).

Wood, R.J.K., Browne, M. and Thew, M.T. (1997) Electrostatic charging precursor to scuffing in lubricated contacts At Proceedings of 1st World Tribology Congress. 01 Sep 1997. , p.102.

Wood, R.J.K., Ramkumar, P., Wang, L., Harvey, T.J., Nelson, K., Yamaguchi, E.S., Harrison, J.J., Powrie, H.E.G. and Otin, N., (2005) Electrostatic monitoring of the effects of carbon black on lubricated steel/steel sliding contacts Dowson, D., Priest, M., Dalmaz, G. and Lubrecht, A.A. (eds.) In Life cycle Tribology: 31st Leeds-lyon Tribology Symposium. Elsevier. 14 pp, pp. 109-123.

Wood, R.J.K., Walker, J.C., Harvey, T.J., Wang, S.C. and Rajahram, S.S. (2013) Influence of microstructure on the erosion and erosion–corrosion characteristics of 316 stainless steel Wear, 306, (1-2), pp. 254-262. (doi:10.1016/j.wear.2013.08.007).

Wood, R.J.K., Wang, L. and Sun, J. (2006) Wear monitoring of lubricated sliding contacts by acoustic emission and electrostatic technologies At Institution of Mechanical Engineers:Tribology Group, 50th Anniversary Conference, Tribology 2006: Surface Engineering and Tribology for Future Engineers and Drivelines. 12 - 14 Jul 2006. 5 pp, pp. 1-5.

Wood, R.J.K., Wharton, J.A., Thakare, M.R. and Menger, C. (2011) Effect of abrasive particle size and the influence of microstructure on the wear mechanisms in wear-resistant materials Wear, 276-277, pp. 16-28. (doi:10.1016/j.wear.2011.11.008).

Wood, R.J.K. and Wheeler, D.W. (1997) Erosion of candidate hard surface coatings for valve applications At Proceedings of International Conference on Valves, Actuators and Systems: Problems and Solutions, 1997. , pp. 217-224.

Wood, R.J.K. and Wheeler, D.W. (1997) Design of a high velocity air-sand jet impingement erosion facility At Proceedings of 1st World Tribology Congress. 01 Sep 1997. , p.225.

Wood, Robert J.K. (2006) Erosion-corrosion intercations and their effect on marine and offshore materials. (Special issue on tribocorrosion) Wear, 261, (9), pp. 1012-1023. (doi:10.1016/j.wear.2006.03.033).

Wood, Robert J.K. (2006) Understanding surface wear in engineering materials In, Mellor, Brian G. (eds.) Surface Coatings for Protection Against Wear. Cambridge, UK, Woodhead Publishing Limited pp. 1-57.

Worsley, Peter, Stokes, M., Barrett, D.S. and Taylor, M. (2013) Joint loading asymmetries in knee replacement patients observed both pre- and six months post-operation Clinical Biomechanics (doi:10.1016/j.clinbiomech.2013.07.014). (PMID:23968817).

Worsley, Peter, Warner, Martin, Delaney, Sinead, Stokes, Maria and Taylor, Mark (1970) The application of ultrasound imaging in the musculoskeletal modeling process At 55th Annual Meeting of the Orthopaedic Research Society. 22 - 25 Feb 2009. 1 pp, p. 1501.

Wright, M. C. M. (2001) Variance of deviations from the average mode count for rectangular wave guides Acoustic Research Letters Online, 2, (1), pp. 19-24. (doi:10.1121/1.1346900).

Wu, A., Mellor, B.G. and Syngellakis, S. (2005) Experimental and finite element study of welded T-joints In, Dulieu-Barton, J.M. (eds.) Advances in Experimental Mechanics IV. Switzerland, Trans Tech pp. 117-124. (Applied Mechanics and Materials, 3-4).

Wu, Ai Hui, Syngellakis, Stavros and Mellor, B.G. (2011) Effect of thermal input on finite element predictions of welding residual stresses Advanced Materials Research, 399-401, pp. 1976-1983. (doi:10.4028/www.scientific.net/AMR.399-401.1976).

Wu, Jun (2011) Efficient prediction method for broadband acoustic mode radiation from engine bypass ducts University of Southampton, Faculty of Engineering and the Environment, Masters Thesis , 85pp.

Wu, T.X. and Thompson, D.J. (2004) Wheel/rail non-linear interactions with coupling between vertical and lateral directions Journal of Vehicle System Dynamics, 41, (1), pp. 27-49. (doi:10.1076/vesd.41.1.27.23407).

Wu, T.X. and Thompson, D.J. (2004) The effects of track non-linearity on wheel/rail impact Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 218, (1), pp. 1-15. (doi:10.1243/095440904322804394).

Wu, T.X. and Thompson, D.J. (2005) An investigation into rail corrugation due to micro-slip under multiple wheel/rail interactions Wear, 258, (7-8), pp. 1115-1125. (doi:10.1016/j.wear.2004.03.060).

Wu, Xiaoqing, Li, Jialu and Shenoi, R.A. (2007) A new method to determine fiber transverse permeability Journal of Composite Materials, 41, (6), pp. 747-756. (doi:10.1177/0021998306067012).

Xia, J., Luo, K.H. and Kumar, S. (2006) Direct and large-eddy simulation of interactions between a reacting plume and evaporating droplets At Conference on Turbulence and Interactions – TI2006. 29 May - 02 Jun 2006.

Xia, J., Luo, K.H. and Kumar, S. (2006) Large-eddy simulation of a turbulent diffusion flame laden with evaporating droplets In 2006 Proceedings of the Joint U.S.-European Fluids Engineering Summer Meeting. ASME..

Xia, J., Luo, K.H. and Kumar, S. (2007) Large-eddy simulation of a turbulent buoyant plume interacting with droplets In New Trends in Fluid Mechanics Research. Tsinghua University Press and Springer. 745 pp, pp. 103-106.

Xia, J., Luo, K.H. and Kumar, S. (2008) Large-eddy simulation of interactions between a reacting jet and evaporating droplets Applied Scientific Research, 80, (1), pp. 133-153. (doi:10.1007/s10494-007-9084-4).

Xia, J., Luo, K.H. and Kumar, S., (2008) Large-eddy simulation of interactions between a reacting plume and water spray Bradley, D., Drysdale, D., Molkov, V. and Carvel, R. (eds.) In Proceedings of the 5th International Seminar on Fire and Explosion Hazards. University of Edinburgh..

Xing, J.T., Price, W.G. and Chen, Y.G., (2002) A numerical simulation of nonlinear fluid: rigid structure interaction problem Paidoussis, M.P. (ed.) At 2002 ASME International Mechanical Engineering Congress & Exposition (IMECE2002). 17 - 22 Nov 2002.

Xing, J.T., Price, W.G. and Chen, Y.G. (2005) A numerical method to simulate nonlinear fluid-rigid structure interaction problems Acta Mechanica Solida Sinica, 18, (2), pp. 95-109.

Xiong, J.-J., Shenoi, R.A. and Zhang, Y. (2008) Effect of the mean strength on the endurance limit or the crack growth threshold and the associated probability distributions The Journal of Strain Analysis for Engineering Design, 43, (4), pp. 243-258. (doi:10.1243/03093247JSA336).

Xiong, J.J. and Shenoi, R.A. (2006) Single-point likelihood method to determine a generalized S-N surface Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 220, (10), pp. 1519-1530. (doi:10.1243/09544062JMES127).

Xiong, J.J. and Shenoi, R.A. (2007) Integrated experimental schemes for bonded patch repairs to notched aluminium-alloy panels based on static and fatigue strength concepts Composite Structures, 83, (3), pp. 266-272. (doi:10.1016/j.compstruct.2007.04.019).

Xiong, J.J. and Shenoi, R.A. (2009) A durability model incorporating safe life methodology and damage tolerance approach to assess first inspection and maintenance period for structures Journal of Reliability Engineering and System Safety, 94, (8), pp. 1251-1258. (doi:10.1016/j.ress.2009.01.005).

Xiong, J.J. and Shenoi, R.A. (2009) A durability model incorporating safe life methodology and damage tolerance approach to assess first inspection and maintenance period for structures Reliability Engineering & System Safety, 94, (8), pp. 1251-1258. (doi:10.1016/j.ress.2009.01.005).

Xiong, J.J., Shenoi, R.A. and Cheng, X. (2009) A modified micromechanical curved beam analytical model to predict the tension modulus of 2D plain weave fabric composites Composites Part B: Engineering, 40, (8), pp. 776-783. (doi:10.1016/j.compositesb.2009.06.004).

Xiong, J.J., Shenoi, R.A. and Zhang, Y. (2005) A reliability based treatment system for actual load history Fatigue and Fracture of Engineering Materials and Structures, 28, pp. 875-889. (doi:10.1111/j.1460-2695.2005.00924.x).

Xiong, Y.P. and Song, Kongjie (1995) On the dynamic interaction of test subsystems in mobility measurement Journal of Vibration, Measurement and Diagnosis, 15, pp. 76-82.

Xiong, Y.P. and Song, Kongjie (1996) Power flow transmission spectra in the complicated coupling flexible system Shengxue Xuebao/Acta Acustica, 21, (4), pp. 368-374.

Xiong, Y.P. and Song, Kongjie (1996) Power flow transmission influenced by vibration source impedance in a compound system Chinese Journal of Acoustics, 15, (1), pp. 73-80.

Xiong, Y.P., Wang, X.P., Xing, J.T. and Price, W.G. (2000) Hybrid active and passive control of vibratory power flow in flexible isolation system Shock and Vibration, 7, (3), pp. 139-148.

Xiong, Y.P., Wang, X.P., Xing, J.T. and Price, W.G. (2000) Hybrid active and passive control of vibratory power flow in flexible isolation system Shock and Vibration, 7, (3), pp. 139-148.

Xiong, Y.P. and Xing, J.T. (2008) Power flow mode theory and application to active vibration control of equipment mounted on travelling flexible ship excited by waves In Proceedings of ISMA 2008 International Conference on Noise and Vibration Engineering. Katholieke Universiteit Leuven. 4384 pp, pp. 439-454.

Xiong, Y.P., Xing, J.T. and Price, W.G. (2003) A general linear mathematical model of power flow analysis and control for integrated structure-control systems Journal of Sound and Vibration, 267, (2), pp. 301-334. (doi:10.1016/S0022-460X(03)00194-9).

Xiong, Y.P., Xing, J.T. and Tan, M. (2007) Transient dynamic responses of an internal liquid-LNG tank-sea water interaction system excited by waves and earthquake loads At Fourteenth International Congress on Sound & Vibration (ICSV14). 09 - 12 Jul 2007. 8 pp, pp. 1-8.

Xiong, Yeping and Song, Kongjie (1995) On the wave effects in flexible isolation system Journal of Shandong University, 25, (2), pp. 21-29.

Xu, C., Kawasaki, M., Furukawa, M., Horita, Z. and Langdon, T.G (2007) Mechanical properties of a spray-cast aluminum alloy processed by severe plastic deformation Materials Science Forum, 539-543, pp. 141-148.

Xu, C. and Langdon, T.G. (2007) The development of hardness homogeneity in aluminum and an aluminum alloy processed by ECAP Journal of Materials Science, 42, (5), pp. 1542-1550. (doi:10.1007/s10853-006-0899-5).

Xu, Cheng, Furukawa, Minoru, Horita, Zenji and Langdon, Terence G. (2003) Using ECAP to achieve grain refinement, precipitate fragmentation and high strain rate superplasticity in a spray-cast aluminum alloy Acta Materialia, 51, (20), pp. 6139-6149. (doi:10.1016/S1359-6454(03)00433-6).

Xu, Cheng and Langdon, Terence G. (2005) Creep and superplasticity in a spray-cast aluminum alloy processed by ECA pressing Materials Science and Engineering: A, 410-411, pp. 398-401. (doi:10.1016/j.msea.2005.08.072).

Xu, Jie, Zhu, Xiaocheng, Shan, Debin, Guo, Bin and Langdon, Terence G. (2015) Effect of grain size and specimen dimensions on micro-forming of high purity aluminum Materials Science and Engineering: A, 646, pp. 207-217. (doi:10.1016/j.msea.2015.08.060).

Xu, Y.M. and Mellor, B.G. (2001) The effect of fillers on the wear resistance of thermoplastic polymeric coatings Wear, 251, (1-12), pp. 1522-1531. (doi:10.1016/S0043-1648(01)00791-8).

Xu, Yanmeng and Mellor, Brian G. (2013) Comparative study of impact and static indentation tests on particulate filled thermoplastic fluoropolymer coatings Proceedings of the Institution of Mechanical Engineers Part C: Journal of Mechanical Engineering Science, n/a, pp. 1-9. (doi:10.1177/0954406213481312).

Xue, Xiaoguang, Li, Guoxi, Xiong, Yeping and Gong, Jingzhong (2012) Power flow analysis based dynamic topology optimization of vibrational structures At the 3rd International Conference on Engeneering Optimization (ENGOPT 2012). 01 - 05 Jul 2012.

Xuereb, André, Ulbricht, Hendrik and Paternostro, Mauro (2014) Macroscopicity in an optomechanical matter-wave interferometer Optics Communications, pp. 1-4. (doi:10.1016/j.optcom.2014.06.006).

Yan, Y.Y., Lai, H., Gentle, C.R. and Smith, J.M. (2002) Numerical analysis of fluid flows inside and around a liquid drop using an incorporation of multi-block iteration and moving mesh Chemical Engineering Research and Design, Transactions of the Institute of Chemical Engineers: Part A, 80, (A3), pp. 325-331.

Yang, J., Xiong, Y.P. and Xing, J.T. (2012) Power flow behaviour of the Duffing oscillator In Proceedings of the International Conference on Noise and Vibration Engineering (ISMA 2012), KU Leuven, Leuven, Belgium, 2012. ISMA..

Yang, J., Xiong, Y.P. and Xing, J.T. (2012) Examinations of nonlinear vibration isolators using power flow approach At 23rd International Congress on Theoretical and Applied Mechanics (ICTAM), China. 19 - 24 Aug 2012.

Yang, J., Xiong, Y.P. and Xing, J.T. (2013) Nonlinear power flow analysis of the Duffing oscillator Mechanical Systems and Signal Processing, 45, (2), pp. 563-578. (doi:10.1016/j.ymssp.2013.11.004).

Yang, Mingming, Qiu, Yi and Griffin, Michael (2015) Effect of backrest inclination on apparent mass at seat and the backrest during vertical whole-body vibration At 50th United Kingdom Conference on Human Responses to Vibration, United Kingdom. 09 - 10 Sep 2015. 13 pp.

Yang, N., Boselli, J. and Sinclair, I. (2001) Simulation and quantitative assessment of homogeneous and inhomogeneous particle distributions in particulate metal matrix composites Journal of Microscopy, 201, (2), pp. 189-200. (doi:10.1046/j.1365-2818.2001.00766.x).

Yang, N., Das, P.K., Blake, J.I.R., Sobey, A.J. and Shenoi, R.A. (2013) The application of reliability methods in the design of tophat stiffened composite panels under in-plane loading Marine Structures, 32, pp. 68-83. (doi:10.1016/j.marstruc.2013.03.002).

Yang, Yan (2011) The effects of increased workload on driving performance and visual behaviour University of Southampton, Faculty of Engineering and the Environment, Doctoral Thesis , 273pp.

Ye, C.C., Dulieu-Barton, J.M., Chambers, A.R., Lennard, F.J. and Eastop, D.D., (2009) Condition monitoring of textiles using optical techniques Chu, F., Ouyang, H., Silberschmidt, V., Garibaldi, L., Surace, C., Ostachowicz, W.M. and Jiang, D. (eds.) In Damage Assessment of Structures VIII. Trans Tech., pp. 447-454. (doi:10.4028/www.scientific.net/KEM.413-414.447).

Ye, C.C., Dulieu-Barton, J.M., Webb, D.J., Zhang, C., Peng, G.D, Chambers, A.R., Lennard, F.J. and Eastop, D.D., (2009) Applications of polymer optical fibre grating sensors to condition monitoring of textiles Jones, Julian D.C. (ed.) In 20th International Conference on Optical Fibre Sensors. SPIE—The International Society for Optical Engineering. 4 pp, 75030M. (doi:10.1117/12.833472).

Ye, Ying (2013) Pacinian channel mediated vasoconstriction in the fingers during vibration exposure University of Southampton, Engineering and the Environment, Doctoral Thesis , 204pp.

Ye, Ying and Griffin, Michael (2015) Finger systolic blood pressures after cold provocation in healthy males and females: effect of room temperature At 50th United Kingdom Conference on Human Responses to Vibration, United Kingdom. 09 - 10 Sep 2015. 12 pp.

Yetman, J.E., Sobey, A.J., Blake, J.I.R. and Shenoi, R.A. (2015) Investigation into skin stiffener debonding of top-hat stiffened composite structures Composite Structures, pp. 1-32. (doi:10.1016/j.compstruct.2015.06.061).

Yin, Yu, Shenoi, R. Ajit, Zhu, Hangbin and Xia, Lijuan (2006) Using wavelet transforms to analyze nonlinear ship rolling and heave-roll coupling Ocean Engineering, 33, (7), pp. 912-926. (doi:10.1016/j.oceaneng.2005.05.014).

You, Chao, Achintha, Mithila, Soady, K.A. and Reed, Philippa (2015) Experimental and numerical investigation of residual stress relaxation in shot-peened notch geometries under low-cycle fatigue At 12th International Conference on the Mechanical Behavior of Materials (ICM 12), Germany. 10 - 14 May 2015.

You, Chao, Achintha, Mithila, Soady, Katherine and Reed, Philippa (2015) Experimental and numerical investigation of the effects of shot peening on low-cycle fatigue behaviour of notched geometries At 9th International Charles Parsons Turbine and Generator Conference, United Kingdom.

Young, E.A., Yang, Y., Bailey, W.O.S., Al-Mosawi, M.K., Beduz, C., Chappell, S. and Twinn, A. (2012) A dual operational refrigerator/flow cryostat with wide bore medium field magnet for application demonstration Physics Procedia, 36, pp. 1343-1347. (doi:10.1016/j.phpro.2012.06.302).

Yuan, H., Rickwood, D., Smyth, I.C. and Thew, M.T. (1996) An investigation into the possible use of hydrocyclones for the removal of yeast from beer Bioseparation, 6, (3), pp. 159-163.

Yuan, Li and Xiong, Y.P. (2013) On the energy harvesting potential of a nonlinear SD oscillator At 15th Asia Pacific Vibration Conference (APVC 2013), Korea, Republic of. 02 - 06 Jun 2013.

Yule, A.J., Shrimpton, J.S., Watkins, A.P., Balachandran, W. and Hu, D. (1995) Electrostatically atomized hydrocarbon sprays Fuel, 74, (7), pp. 1094-1103. (doi:10.1016/0016-2361(95)00037-6).

Yunus, E.M., McBride, J.W. and Spearing, S.M. (2008) Low force electrical switching using gold coated vertically aligned multi-walled carbon nanotubes surfaces IEICE Technical Report, 108, (296), pp. 61-64.

Yunus, Pg Hj Md Esa Al-Islam bin Pg Hj Md (2009) Carbon nanotube surfaces for low force contact application University of Southampton, School of Engineering Sciences, Doctoral Thesis , 256pp.

Zaghari, B., Ghandchi Tehrani, Maryam and Rustighi, E. (2014) Mechanical modelling of a vibration energy harvester with time-varying stiffness At EURODYN 2014: 9th International Conference on Structural Dynamics. 30 Jun - 02 Jul 2014. 8 pp.

Zaghari, Bahareh, Rustighi, Emiliano and Ghandchi Tehrani, Maryam (2015) An experimentally validated parametrically excited vibration energy harvester with time-varying stiffness At Proceedings of SPIE 9439, Smart Materials and Nondestructive Evaluation for Energy Systems 2015. , pp. 1-13.

Zannetti, Luca and Chernyshenko, Sergei I. (2005) Vortex pair and Chaplygin cusps European Journal of Mechanics - B/Fluids, 24, (3), pp. 328-337. (doi:10.1016/j.euromechflu.2004.09.005).

Zeng, P., Rainforth, W.M. and Cook, R.B. (2014) Characterisation of the oxide film on the taper interface from retrieved large diameter metal on polymer modular total hip replacements Tribology International, pp. 1-11. (doi:10.1016/j.triboint.2014.12.012).

Zeoli, Nicola and Gu, Sai (2008) Numerical modelling of droplet break-up for gas atomisation Computational Materials Science, 38, (2), pp. 282-292. (doi:10.1016/j.commatsci.2006.02.012).

Zervos, A., Papanastasiou, P. and Vardoulakis, I. (2008) Shear localisation in thick-walled cylinders under internal pressure based on gradient elastoplasticity Journal of Theoretical and Applied Mechanics, 38, (1-2), pp. 81-100.

Zhang, D., Hill, M. and McBride, J.W. (2006) Evaluation of the volumetric erosion of spherical electrical contacts using the defect removal method IEEE Transactions on Components and Packaging Technologies, 29, (4), pp. 711-717. (doi:10.1109/TCAPT.2006.880523).

Zhang, G.F., Sauvage, X., Wang, J.T., Gao, N. and Langdon, T.G. (2013) Evolution of a martensitic structure in a Cu–Al alloy during processing by high-pressure torsion Journal of Materials Science, 48, (13), pp. 4613-4619. (doi:10.1007/s10853-013-7153-8).

Zhang, J., Cai, B. and Wu, J. (2003) Study of probe vehicle technology At 6th International IEEE Conference on Intelligent Transport Systems (IEEE ITSC 2003). 12 - 15 Oct 2003.

Zhang, Jiuwen, Gao, Nong and Starink, Marco J. (2010) Al-Mg-Cu based alloys and pure Al processed by high pressure torsion: the influence of alloying additions on strengthening Materials Science and Engineering: A, 527, (15), pp. 3472-3479. (doi:10.1016/j.msea.2010.02.016).

Zhang, Nian Xian, Kawasaki, Megumi, Huang, Yi and Langdon, Terence G. (2013) Microstructural evolution in two-phase alloys processed by high-pressure torsion Journal of Materials Science, 48, pp. 4582-4591. (doi:10.1007/s10853-012-7087-6).

Zhang, Nianxian, Ding, Hua, Li, Jizhong, Wu, Xiaolin, Li, Yinglong and Xia, Kenong (2011) Microstructure and mechanical properties of ultra-fine grain AZ80 alloy processed by back pressure equal channel angular pressing [in special issue: Nanomaterials by Severe Plastic Deformation: NanoSPDS] Materials Science Forum, 667-669, pp. 547-552. (doi:10.4028/www.scientific.net/MSF.667-669).

Zhang, S., Dulieu-Barton, J.M., Fruehmann, R.K. and Thomsen, O.T. (2012) A methodology for obtaining material properties of polymeric foam at elevated temperatures [in special issue: Sandwich Structures] Experimental Mechanics, 52, (1), pp. 3-15. (doi:10.1007/s11340-011-9519-7).

Zhang, S., Dulieu-Barton, J.M. and Thomsen, O.T. (2014) The effect of temperature on the failure modes of polymer foam cored sandwich structures Composite Structures, 121, pp. 104-113. (doi:10.1016/j.compstruct.2014.10.032).

Zhang, Shixiong, Chun Wang, Ying, Zhilyaev, Alexander P., Korznikova, Elena, Li, Shukui, Raab, Georgy I. and Langdon, Terence G. (2015) Temperature and strain rate dependence of microstructural evolution and dynamic mechanical behavior in nanocrystalline Ti Materials Science and Engineering: A, 641, pp. 29-36. (doi:10.1016/j.msea.2015.06.035).

Zhang, Shixiong, Wang, Ying Chun, Zhilyaev, Alexander P., Korznikova, Elena, Li, Shukui, Raab, Georgy I. and Langdon, Terence G. (2015) Effect of grain size on compressive behaviour of titanium at different strain rates Materials Science and Engineering: A, 645, pp. 311-317. (doi:10.1016/j.msea.2015.08.031).

Zhang, W., Abhayapala, T.D. and Fazi, F.M. (2013) Functional analysis guided approach for sound field reproduction with flexible loudspeaker layouts At IEEE Workshop on Applications of Signal Processing to Audio and Acoustics (WASPAA), United States. 20 - 23 Oct 2013.

Zhang, X. (2002) Computation of sound radiation from an exhaust duct At 6th CEAS-ASC Workshop: From Computational Fluid Dynamics to Computational Aeroacoustics. 07 - 08 Nov 2002.

Zhang, X., Toal, David J.J., Bressloff, N.W., Keane, A.J., Witham, F., Gregory, J., Stow, S., Goddard, C., Zedda, M. and Rodgers, M. (2014) Prometheus: a geometry-centric optimisation system for combustor design At ASME Turbo Expo 2014: Turbine Technical Conference and Exposition, Germany. 16 - 20 Jun 2014. 13 pp.

Zhang, Xiaolu (2014) Measurement and modelling of seating dynamics to predict seat transmissibility University of Southampton, Engineering and the Environment, Doctoral Thesis , 246pp.

Zhang, Y. and Banks, Charles J. (2013) Impact of different particle size distributions on anaerobic digestion of the organic fraction of municipal solid waste Waste Management, 33, (2), pp. 297-307. (doi:10.1016/j.wasman.2012.09.024).

Zhang, Y., Elliott, S.J., Zhang, X. and Nourzad, D.S. (2012) Active vibration control of a doubly-curved shell with a laminated polyvinylidene fluoride actuator International Journal of Aerospace and Lightweight Structures, 2, (2), pp. 199-219. (doi:10.3850/S2010428612000335).

Zhao, Chun, Graham, Wood, Suan-hui, Pu and Kraft, Michael (2012) Design of an ultra-sensitive MEMS force sensor utilizing mode localization in weakly coupled resonators At 23rd Micromechanics and Microsystems Europe Workshop, Germany. 09 - 12 Sep 2012.

Zhao, Chun, Wood, Graham S., Xie, Jianbing, Chang, Honglong, Pu, Suan Hui, Chong, Harold M.H. and Kraft, Michael (2015) A sensor for stiffness change sensing based on three weakly coupled resonators with enhanced sensitivity At 28th IEEE MEMS Conference, Portugal. 18 - 22 Jan 2015. 5 pp.

Zhao, Y.H., Guo, Y.Z., Wei, Q., Dangelewicz, A.M., Xu, C., Zhu, Y.T., Langdon, T.G., Zhou, Y.Z and Lavernia, E.J. (2008) Influence of specimen dimensions on the tensile behavior of ultrafine-grained Cu Scripta Materialia, 59, (6), pp. 627-630. (doi:10.1016/j.scriptamat.2008.05.031).

Zheng, Guangtai (2012) Biodynamics of the seated human body with dual-axis excitation: nonlinearity and cross-axis coupling University of Southampton, Institute of Sound and Vibration Research, Doctoral Thesis , 267pp.

Zhilyaev, A.P., Kim, B.K., Nurislamova, G.V., Baró, M.D., Szpunar, J.A. and Langdon, T.G. (2002) Orientation imaging microscopy of ultrafine-grained nickel Scripta Materialia, 46, (8), pp. 575-580. (doi:10.1016/S1359-6462(02)00018-0).

Zhilyaev, A.P., McNelly, T.R. and Langdon, T.G. (2007) Evolution of microsturcture and mircrotexture in fcc metals during high-pressure torsion Journal of Materials Science, 42, (5), pp. 1517-1528. (doi:10.1007/s10853-006-0628-0).

Zhilyaev, Aleander P. and Langdon, Terence G. (2013) Microhardness and EBSD microstructure mapping in partially-pressed Al and Cu through 90 degrees ECAP die Materials Research-ibero-American Journal of Materials, 16, (3), pp. 586-591. (doi:10.1590/S1516-14392013005000037).

Zhou, Fei and Wang, Qianzhi (2013) Low-friction behavior of hard solid coatings in water environment In, Wng, Q. Jane and Chung, Yip-Wah (eds.) Encyclopedia of Tribology. Berlin, DE, Springer pp. 2020-2023.

Zhou, Fei, Wang, Qianzhi and Kong, Jizhou (2014) Tribological properties of Cr/a-C coatings in aqueous solutions At The 5th Advanced Forum on Tribology, Japan. 13 - 14 Apr 2014.

Zhou, Fei, Wang, Qianzhi, Yue, Bin, Wu, Xuemei, Zhuge, Lanjian and Cheng, Xiaonong (2012) Mechanical properties and bonding structure of boron carbon nitride films synthesized by dual ion beam sputtering Materials Chemistry and Physics, 138, (1), pp. 215-224. (doi:10.1016/j.matchemphys.2012.11.049).

Zhou, Fei, Yue, Bin, Wang, Qianzhi, Wang, Xiaolei, Koshi, Adachi and Kato, Koji (2010) Tribological properties of a-CNx coatings sliding against SiC balls in ethylene glycol aqueous solution [in special issue: Some Current Trends in Improving Boundary Lubrication] Lubrication Science, 22, (6-7), pp. 225-236. (doi:10.1002/ls.119).

Zhou, Hui and Qiu, Yi (2015) A simple mathematical model of a vehicle with seat and occupant for studying the effect of vehicle dynamic parameters on ride comfort At 50th United Kingdom Conference on Human Responses to Vibration, United Kingdom. 09 - 10 Sep 2015. 14 pp.

Zhou, Jie (2014) Sound transmission through panels and shells filled with porous material in the presence of external flow University of Southampton, Engineering and the Environment, Doctoral Thesis , 168pp.

Zhou, Xiaolin, Zheng, Xiaowei, Zhang, Rong and Hanzo, Lajos (2013) Chip-interleaved optical code division multiple access relying on a photon-counting iterative successive interference canceller for free-space optical channels Optics Express, 21, (13), pp. 15926-15937. (doi:10.1364/OE.21.015926).

Zhou, Xincong, Qin, Li, Xiong, Yeping, Quan, Jianzhou and Wang, Xinping (2014) Vibrational characteristics of a marine shaft coupling system excited by propellor force At 21st International Congress on Sound and Vibration (ICSV21), China. 13 - 17 Jul 2014. 11 pp.

Zhou, Zhen (2014) Subjective and biodynamic responses of seated subjects exposed to whole-body vertical vibration at low frequency University of Southampton, Engineering and the Environment, Doctoral Thesis , 252pp.

Zhu, Guanghong, Xiong, Y.P., Daley, Stephen and Shenoi, Ajit (2012) Dynamical Analysis of a two-stage non-linear MRE vibration isolation system At 19th International Congress on Sound and Vibration (ICSV19), Lithuania. 08 - 12 Jul 2012.

Zhu, Guanghong, Xiong, Y.P., Daley, Stephen and Shenoi, R.A. (2014) Experimental study and mathematical modelling on dependent shear properties of MRE material At 14th International Conference on Electrorheological Fluids and Magnetorheological Suspensions (ERMR2014), Spain. 07 - 11 Jul 2014.

Zhu, Guanghong, Xiong, Yeping, Daley, Steve and Shenoi, Ajit (2013) Mathematical modelling and dynamical analysis of a magnetorheological elastomer tuneable absorber At The Ninth International Conference on Vibration Engineering and Technology of Machinery VETOMAC-IX 2013, China. 20 - 23 Aug 2013.

Zhu, Z. and Starink, M.J., (2005) Influence of cold work and solutionising temperature on age hardening capability of Al-Mg-Mn alloys with small Cu and Si additions Howe, J.M., Laughlin, D.E., Lee, J.K., Srolovitz, D.J. and Dahmen, U. (eds.) In Solid-Solid Phase Transformations in Inorganic Materials 2005. The Minerals, Metals & Materials Society., pp. 383-390.

Zhu, Z. and Starink, M.J. (2008) Age hardening and softening in cold-rolled Al-Mg-Mn alloys with up to 0.4wt%Cu Materials Science and Engineering: A, 489, pp. 138-149.

Zhu, Z. and Starink, M.J. (2008) Solution strengthening and age hardening capability of Al-Mg-Mn alloys with small additions of Cu Materials Science and Engineering: A, 488, pp. 125-133.

Zwahlen, Alexander, Christen, David, Ruffoni, Davide, Schneider, Philipp, Schmölz, Werner and Müller, Ralph (2014) Inverse finite element modeling for characterization of local elastic properties in image-guided failure assessment of human trabecular bone Journal of Biomechanical Engineering, 137, (1), pp. 1-9. (doi:10.1115/1.4028991). (PMID:25367315).

de Winter, J.C.F., Happee, R., Martens, M.H. and Stanton, N.A. (2014) Effects of adaptive cruise control and highly automated driving on workload and situation awareness: a review of the empirical evidence Transportation Research Part F Traffic Psychology and Behaviour, 27, part B, pp. 196-217. (doi:10.1016/j.trf.2014.06.016).

den Boer, E., Williams, I.D., Curran, A. and Kopacek, B. (2014) Editorial: Industrial networks for resource efficiency Proceedings of the ICE - Waste and Resource Management, 167, (WR3), pp. 95-96. (doi:10.1680/warm.2014.167.3.95).

den Boer, E., Williams, I.D., Curran, A. and Kopacek, B. (2014) Briefing: demonstrating the circular resource economy – the ZeroWIN approach Proceedings of the ICE - Waste and Resource Management, 167, (WR3), pp. 97-100. (doi:10.1680/warm.14.00005).

van der Westhuizen, Gysbert Johannes (2012) Fibre optical parametric devices for large frequency-shift wavelength conversion University of Southampton, Faculty of Physical Sciences and Engineering, Doctoral Thesis , 204pp.

This list was generated on Thu Mar 23 01:11:40 2017 GMT.