The University of Southampton
University of Southampton Institutional Repository

Active acoustic metamaterials for high performance noise control

Active acoustic metamaterials for high performance noise control
Active acoustic metamaterials for high performance noise control
Acoustic metamaterials have been shown to have the ability to achieve high levels of low frequency noise attenuation through the use of engineered structures, which consist of arrays of subwavelength unit cells. These metamaterials exhibit effective material properties that are not available in naturally occurring media. The bandwidth over which these metamaterials can achieve negative effective material properties is generally relatively-narrow due to the use of resonant unit cells. Although the bandwidth of negativity has been extended by integrating active control technologies into metamaterials, the performance of these hybrid systems is still limited by the use of the resonant inclusions. Thus, this thesis presents an investigation into how conventional active control systems influence the effective material properties and whether active acoustic sources can be optimally-driven to directly control the effective material properties and also realise nonreciprocal behaviour. An effective material property optimisation procedure is proposed and it is shown that the optimised single monopole and single dipole control sources achieve broadband negative effective bulk modulus and density respectively, and by combining the two optimised acoustic sources, broadband double negativity is also achieved. Nonreciprocal acoustic devices, which are based on the design of acoustic metamaterials, have shown the ability to achieve nonreciprocal sound transmission. Although existing nonreciprocal acoustic devices can achieve broadband nonreciprocal sound transmission in a one dimensional space, it has not yet been shown that nonreciprocal sound absorption can also be achieved by nonreciprocal acoustic devices in one or two dimensional spaces. Therefore, this thesis also presents an investigation into how feedforward wave-based active control systems can be used to achieve broadband nonreciprocal sound transmission and absorption in both one and two dimensional environments. This active nonreciprocal control strategies are demonstrated through both simulations and experiments in one and two dimensional spaces and demonstrate an effective and adaptable means of realising nonreciprocal control.
University of Southampton
Tan, Joe
b740c9b2-e880-4e20-92ba-febaa7f688a1
Tan, Joe
b740c9b2-e880-4e20-92ba-febaa7f688a1
Cheer, Jordan
8e452f50-4c7d-4d4e-913a-34015e99b9dc

Tan, Joe (2022) Active acoustic metamaterials for high performance noise control. University of Southampton, Doctoral Thesis, 153pp.

Record type: Thesis (Doctoral)

Abstract

Acoustic metamaterials have been shown to have the ability to achieve high levels of low frequency noise attenuation through the use of engineered structures, which consist of arrays of subwavelength unit cells. These metamaterials exhibit effective material properties that are not available in naturally occurring media. The bandwidth over which these metamaterials can achieve negative effective material properties is generally relatively-narrow due to the use of resonant unit cells. Although the bandwidth of negativity has been extended by integrating active control technologies into metamaterials, the performance of these hybrid systems is still limited by the use of the resonant inclusions. Thus, this thesis presents an investigation into how conventional active control systems influence the effective material properties and whether active acoustic sources can be optimally-driven to directly control the effective material properties and also realise nonreciprocal behaviour. An effective material property optimisation procedure is proposed and it is shown that the optimised single monopole and single dipole control sources achieve broadband negative effective bulk modulus and density respectively, and by combining the two optimised acoustic sources, broadband double negativity is also achieved. Nonreciprocal acoustic devices, which are based on the design of acoustic metamaterials, have shown the ability to achieve nonreciprocal sound transmission. Although existing nonreciprocal acoustic devices can achieve broadband nonreciprocal sound transmission in a one dimensional space, it has not yet been shown that nonreciprocal sound absorption can also be achieved by nonreciprocal acoustic devices in one or two dimensional spaces. Therefore, this thesis also presents an investigation into how feedforward wave-based active control systems can be used to achieve broadband nonreciprocal sound transmission and absorption in both one and two dimensional environments. This active nonreciprocal control strategies are demonstrated through both simulations and experiments in one and two dimensional spaces and demonstrate an effective and adaptable means of realising nonreciprocal control.

Text
Joe Tan -Doctor of Philosophy - Signal Processing Audio and Hearing - 31 05 2022 - Version of Record
Available under License University of Southampton Thesis Licence.
Download (17MB)
Text
Permission to deposit thesis - form
Restricted to Repository staff only
Available under License University of Southampton Thesis Licence.

More information

Submitted date: May 2022

Identifiers

Local EPrints ID: 467488
URI: http://eprints.soton.ac.uk/id/eprint/467488
PURE UUID: d23fe5ce-ac91-4369-9570-c6c305841351
ORCID for Jordan Cheer: ORCID iD orcid.org/0000-0002-0552-5506

Catalogue record

Date deposited: 11 Jul 2022 16:43
Last modified: 17 Mar 2024 07:22

Export record

Contributors

Author: Joe Tan
Thesis advisor: Jordan Cheer ORCID iD

Download statistics

Downloads from ePrints over the past year. Other digital versions may also be available to download e.g. from the publisher's website.

View more statistics

Atom RSS 1.0 RSS 2.0

Contact ePrints Soton: eprints@soton.ac.uk

ePrints Soton supports OAI 2.0 with a base URL of http://eprints.soton.ac.uk/cgi/oai2

This repository has been built using EPrints software, developed at the University of Southampton, but available to everyone to use.

We use cookies to ensure that we give you the best experience on our website. If you continue without changing your settings, we will assume that you are happy to receive cookies on the University of Southampton website.

×