Dataset for the article: Experimental characterization of an O-band bismuth-doped fiber amplifier

Abstract

This dataset contains: Sheet 1: Fig. 2. (b) an example of electrical power spectra measured by the RFSA that were used to determine the electrical NF of the BDFA at the wavelength of 1350nm and the input power (Pin) = -20dBm. col(A) = Frequnecy (HZ) col(B) = RFSA_cal (dBm) col(C) = RFSA_meas (dBm) col(D) = RFSA_ther (dBm) Sheet 2: Fig. 3. (a) frequency dependent NF of the BDFA (Pin=-20dBm). col(A) = Frequency (Hz) col(B) = NF_1310nm (dB) col(C) = NF_1330nm (dB) col(D) = NF_1350nm (dB) col(E) = NF_1360nm (dB) Sheet 3: Fig. 3. (b) averaged NF of the BDFA as it varies with wavelength (Pin=-20dBm). (Note - this is a double y-axis plot) col(A) = x1:Wavelength (nm) col(B) = y1:NF (dB) col(C) = x2:Wavelength (nm) col(D) = y2:Gain (dB) Sheet 4: Fig. 3. (c) frequency dependent NF of the SOA (Pin=-20dBm). col(A) = Frequency (Hz) col(B) = NF_1310nm (dB) col(C) = NF_1330nm (dB) col(D) = NF_1350nm (dB) col(E) = NF_1360nm (dB) Sheet 5: Fig. 3. (d) averaged NF of the SOA as it varies with wavelength (Pin=-20dBm). (Note - this is a double y-axis plot) col(A) = x1:Wavelength (nm) col(B) = y1:NF (dB) col(C) = x2:Wavelength (nm) col(D) = y2:Gain (dB) Sheet 6: Fig. 4. Averaged NF of the BDFA at the wavelength of 1350nm as it varies with input power. col(A) = Pin (dBm) col(B) = Avg NF BDFA at 1350nm (dB) Sheet 7: Fig. 5. (b) gain tilt results. col(A) = Wavelength (nm) col(B) = -5dBm-Static (dB/nm) col(C) = 0dBm-Static (dB/nm) col(D) = 5dBm-Static (dB/nm) col(E) = 10dBm-Static (dB/nm) col(F) = -5dBm-Dynamic (dB/nm) col(G) = 0dBm-Dynamic (dB/nm) col(H) = 5dBm-Dynamic (dB/nm) col(I) = 10dBm-Dynamic (dB/nm) Sheet 8: Fig. 6. (b) power excursion of the small probe signal as a function of the modulation frequency. (Note - this is a double y-axis plot) col(A) = x1:BDFA - Mod Freq (kHz) col(B) = y1:BDFA - Power excursion (dB) col(C) = x2:SOA - Mod Freq (kHz) col(D) = y2:SOA - Power excursion (dB) Sheet 9: Fig. 6. (b) inset shows the optical signals modulated at 50kHz, as observed on the OSC. (Note - this is a double y-axis plot) col(A) = x1:Amplified saturating signal - Time (sec) col(B) = y1:Amplified saturating signal - Normalised amplitude col(C) = x2:Probe with x10 magnification and vertical offet - Time (sec) col(D) = y2:Probe with x10 magnification and vertical offet - Amplitude Sheet 10: Fig. 7. (b)PDG results of the BDFA at 1350nm with varied input power. col(A) = Input power (dBm) col(B) = PDG (dB) Sheet 11: Fig. 7. (c) PDG results of the BDFA at 1350nm wavelength dependent PDG at -10-dBm input power. col(A) = Wavelength (nm) col(B) = PDG (dB)

More information

Identifiers

Catalogue record

Export record

ASCII CitationAtomBibTeXData Cite XMLDublin CoreDublin CoreEP3 XMLEndNoteHTML CitationHTML CitationHTML ListJSONMETSMODSMPEG-21 DIDLOpenURL ContextObjectOpenURL ContextObject in SpanRDF+N-TriplesRDF+N3RDF+XMLRIOXX2 XMLReferReference ManagerSimple Metadata

Altmetrics