Items where Division is "Faculties (pre 2018 reorg) > Faculty of Engineering and the Environment (pre 2018 reorg) > Mechanical Engineering (pre 2018 reorg) > Engineering Mats & Surface Engineerg Gp (pre 2018 reorg)
Current Faculties > Faculty of Engineering and Physical Sciences > School of Engineering > Mechanical Engineering > Mechanical Engineering (pre 2018 reorg) > Engineering Mats & Surface Engineerg Gp (pre 2018 reorg)
Mechanical Engineering > Mechanical Engineering (pre 2018 reorg) > Engineering Mats & Surface Engineerg Gp (pre 2018 reorg)" and Year is 2012
 | Up a level |
Number of items: 89.
Comment on "2D Atomic Mapping of Oxidation States in Transition Metal Oxides by Scanning Transmission Electron Microscopy and Electron Energy-Loss Spectroscopy" - E.A. Ahmad, G. Mallia, D. Kramer, V. Tileli, A.R. Kucernak and N.M. Harrison
Type: Article
| 2012
| Item availability restricted.
Sorption of hydrogen onto titanate nanotubes decorated with a nanostructured Cd3[Fe(CN)6]2 Prussian Blue analogue - A.A. Al-Hajjaj, B. Zamora, D.V. Bavykin, A.A. Shah, F.C. Walsh and E. Reguera
Type: Article
| 2012
| Item availability restricted.
Enhanced strength–ductility synergy in nanostructured Cu and Cu–Al alloys processed by high-pressure torsion and subsequent annealing - X.H An, S.D Wu, Z. F Zhang, R.B. Figueiredo, N. Gao and T.G. Langdon
Type: Article
| 2012
| Item not available on this server.
Emission wavelength tuning in rare earth fluoride upconverting nanoparticles decorated with dye coated titanate nanotubes - Dmitry V. Bavykin, Tanya L. Stuchinskaya, Lefteris Danos and David A. Russell
Type: Article
| 2012
| Item availability restricted.
Probing the perturbation of lecithin bilayers by unmodified C60 fullerenes using experimental methods and computational simulations - Nikolaos Bouropoulos, Orestis Katsamenis, Paul A. Cox, Simon Norman, Paraskevi Kallinteri, MarcoE. Favretto, Spyros N. Yannopoulos, Aristides Bakandritsos and Dimitrios G. Fatouros
Type: Article
| 2012
Assessment of three-dimensional crack growth in ductile layered material systems - A. Burke-Veliz, S. Syngellakis and P.A.S. Reed
Type: Article
| 2012
| Item not available on this server.
Applied stress controls the production of nano-twins in coarse-grained metals - Y. Cao, Y.B. Wang, X.Z. Liao, M. Kawasaki, S.P. Ringer, T.G. Langdon and Y.T. Zhu
Type: Article
| 2012
| Item not available on this server.
Microstructural heterogeneity in hexagonal close-packed pure Ti processed by high-pressure torsion - Y.J Chen, Y.J Li, J.C Walmsley, N. Gao, H.J Roven, M.J. Starink and T.G. Langdon
Type: Article
| 2012
| Item not available on this server.
Possible self-Organized criticality in the Portevin-Le Chatelier effect during decomposition of solid solution alloys - N.Q. Chinh, T. Csanádi, J. Gubicza, J. Lendvai and T.G. Langdon
Type: Article
| 2012
| Item not available on this server.
Strain rate sensitivity studies in an ultrafine-grained Al-30wt.%Zn alloy using micro- and nano-indentation - N.Q. Chinh, T. Csanádi, T. Györi, R.Z. Valiev, B.B. Straumal, M. Kawasaki and T.G. Langdon
Type: Article
| 2012
| Item not available on this server.
Observations of unique plastic behavior in micro-pillars of an ultrafine-grained alloy - N.Q. Chinh, T. Győri, R.Z. Valiev, P. Szommer, G. Varga, K. Havancsák and T.G. Langdon
Type: Article
| 2012
| Item not available on this server.
Influence of the microstructural changes and induced residual stresses on tensile properties of wrought magnesium alloy friction stir welds - Lorelei Commin, M. Dumont, R. Rotinat, F. Pierron, J.-E. Masse and L. Barrallier
Type: Article
| 2012
| Item not available on this server.
Assessment of non-adiabatic behaviour in thermoelastic stress analysis of composite sandwich panels - D.A. Crump and J.M. Dulieu-Barton
Type: Article
| 2012
| Item not available on this server.
The effect of high-pressure torsion on the behaviour of intermetallic particles present in Al–1Mg and Al–3Mg - Jennifer Crump, Xiao Guang Qiao and Marco J. Starink
Type: Article
| 2012
Macroscopic and microscopic descriptions of the plastic deformation of Fcc metals over a wide range [-4pt] of strain and temperature - T. Csanádi, N.Q. Chinh, J. Gubicza and T.G. Langdon
Type: Article
| 2012
| Item not available on this server.
Increased efficiencies on CdTe solar cells via luminescence down-shifting with excitation energy transfer between dyes - Lefteris Danos, Thomas Parel, Tomas Markvart, Vincent Barrioz, W.S.M. Brooks and S.J.C. Irvine
Type: Article
| 2012
| Item availability restricted.
Damage detection in composite materials using full-field slope measurements - Cédric Devivier, F. Pierron and Michael Wisnom
Type: Article
| 2012
| Item not available on this server.
Photon reabsorption in fluorescent solar collectors - L. Fang, T. S. Parel, L. Danos and T. Markvart
Type: Article
| 2012
Analysis of plastic flow during high-pressure torsion - Roberto B. Figueiredo, Maria T.P. Aguilar, Paulo R. Cetlin and Terence G. Langdon
Type: Article
| 2012
| Item not available on this server.
An evaluation of homogeneity and heterogeneity in metals processed by high-pressure torsion - Roberto B. Figueiredo, Megumi Kawasaki and Terence G. Langdon
Type: Article
| 2012
| Item not available on this server.
Fabricating ultrafine-grained materials through the application of severe plastic deformation: a review of developments in Brazil - Roberto B. Figueiredo and Terence G. Langdon
Type: Article
| 2012
| Item not available on this server.
Influence of rolling direction on flow and cavitation in a superplastic magnesium alloy processed by equal-channel angular pressing - Roberto B. Figueiredo and Terence G. Langdon
Type: Article
| 2012
| Item not available on this server.
Using finite element modelling to examine the temperature distribution in quasi-constrained high-pressure torsion - Roberto B. Figueiredo, Pedro Henrique R. Pereira, Maria Teresa P. Aguilar, Paulo R. Cetlin and Terence G. Langdon
Type: Article
| 2012
| Item not available on this server.
Tribological properties of ultrafine-grained materials processed by severe plastic deformation - Nong Gao, Chuan Ting Wang, Robert J.K. Wood and Terence G. Langdon
Type: Article
| 2012
| Item not available on this server.
Characterization of high pressure torsion processed 7150 Al-Zn-Mg-Cu alloy - K.S. Ghosh, N. Gao and M.J. Starink
Type: Article
| 2012
| Item availability restricted.
Mitigation of fatigue damage in self-healing vascular materials - A.R. Hamilton, N.R. Sottos and S.R. White
Type: Article
| 2012
| Item not available on this server.
Type: Article
| 2012
| Item not available on this server.
Microstructure of low stacking fault energy silver processed by different routes of severe plastic deformation - Z. Hegedűs, J. Gubicza, M. Kawasaki, N.Q. Chinh, Z. Fogarassy and T.G. Langdon
Type: Article
| 2012
| Item not available on this server.
Synchrotron and neutron laminography for three-dimensional imaging of devices and flat material specimens - Lukas Helfen, Thilo F. Morgeneyer, Feng Xu, Mark N. Mavrogordato, Ian Sinclair, Burkhard Schillinger and Tilo Baumbach
Type: Article
| 2012
| Item not available on this server.
Evolution of strength and homogenity in a magnesium alloy processed by high-pressure torsion at different temperatures - Yi Huang, Roberto B. Figueiredo, Thierry Baudin, François Brisset and Terence G. Langdon
Type: Article
| 2012
| Item not available on this server.
Effect of temperature on the processing of a magnesium alloy by high-pressure torsion - Yi Huang, Roberto B. Figueiredo, Thierry Baudin, Anne-Laure Helbert, François Brisset and Terence G. Langdon
Type: Article
| 2012
| Item not available on this server.
Effect of HPT processing temperature on strength of a Mg-Al-Zn alloy - Yi Huang, Roberto B. Figueiredo and Tenerence G. Langdon
Type: Article
| 2012
| Item not available on this server.
Bone matrix material properties on the micro- and nanoscale - Orestis Katsamenis
Type: Thesis
| 2012
Distribution of nanoelasticity in osteonal level affects bone fracture toughness behaviour - Orestis Katsamenis, Orestis G. Andriotis and Philipp J Thurner
Type: Article
| 2012
| Item not available on this server.
Microstructural characterization of CPPD and hydroxyapatite crystal depositions on human menisci - Orestis L. Katsamenis, Vagelis Karoutsos, Konstantinos Kontostanos, Elias C. Panagiotopoulos, Helen Papadaki and Nikolaos Bouropoulos
Type: Article
| 2012
| Item not available on this server.
Twenty-five years of severe plastic deformation: recent developments in evaluating the degree of homogeneity through the thickness of disks processed by high-pressure torsion - Megumi Kawasaki, Roberto B. Figueiredo and Terence G. Langdon
Type: Article
| 2012
| Item not available on this server.
Using deformation mechanism maps to depict flow processes in superplastic ultrafine-grained materials - Megumi Kawasaki and Terence G. Langdon
Type: Article
| 2012
| Item not available on this server.
Type: Book Section
| 2012
| Wiley-VCH Verlag
| Item not available on this server.
Reliability analysis of adhesive bonded scarf joints - A. Kimiaeifar, H. Toft, E. Lund, O.T. Thomsen and J.D. Sørensen
Type: Article
| 2012
| Item not available on this server.
Microstructural evolution and electro-resistivity in HPT nickel - E.A. Korznikova, S. Yu Mironov, A.V. Korznikov, A.P. Zhilyaev and T.G. Langdon
Type: Article
| 2012
| Item not available on this server.
3D damage characterisation and the role of voids in the fatigue of wind turbine blade materials - J. Lambert, A.R. Chambers, I. Sinclair and S.M. Spearing
Type: Article
| 2012
| Item availability restricted.
The current status of bilk nanostructured materials - Terence G. Langdon
Type: Article
| 2012
| Item not available on this server.
Carbon nanotube composite surfaces for electrical contact interfaces - Adam Lewis, J.W. McBride, Liudi Jiang, S.M. Spearing, Chamaporn Chianrabutra and Michael Down
Type: Conference or Workshop Item
| 2012
DSC study on phase transitions and their correlation with properties of overaged Al-Zn-Mg-Cu alloys - X.M. Li and M.J. Starink
Type: Article
| 2012
| Item not available on this server.
Nanobiomaterials library synthesis for high-throughput screening using a dry powder printing method - Zongqi Li and Shoufeng Yang
Type: Article
| 2012
Finite element based surface roughness study for ohmic contact of microswitches - Hong Liu, Dimitri Leray, Stephane Colin, Patrick Pons and Adrien Broue
Type: Conference or Workshop Item
| 2012
Effect of aging on microstructural development in an Al–Mg–Si alloy processed by high-pressure torsion - A. Loucif, R.B. Figueiredo, M. Kawasaki, T. Baudin, F. Brisset, R. Chemam and T.G. Langdon
Type: Article
| 2012
| Item not available on this server.
An investigation of microtexture evolution in an AlMgSi alloy processed by high-pressure torsion - Aicha Loucif, Thierry Baudin, François Brisset, Roberto B. Figueiredo, Rafik Chemam and Terence G. Langdon
Type: Article
| 2012
| Item not available on this server.
Laser compression of nanocrystalline tantalum - C.-H. Lu, B.R. Maddox, B.A. Remington, E.M. Brigna, M. Kawasaki, T.G. Langdon, H.-G. Park, B. Kad and M.A. Meyers
Type: Article
| 2012
| Item not available on this server.
Novel methods to fabricate macroporous 3D carbon scaffolds and ordered surface mesopores on carbon filaments - Xuesong Lu, Lifeng Chen, Negar Amini, Shoufeng Yang, J.R.G. Evans and Z.X. Guo
Type: Article
| 2012
| Item not available on this server.
Indentation response of a NiTi shape memory alloy: modeling and experiments - C. Maletta, F. Furgiuele, E. Sgambitterra, M. Callisti, B.G. Mellor and R.J.K. Wood
Type: Article
| 2012
Harvesting sunshine: solar cells, photosynthesis and the thermodynamics of light - T. Markvart, L. Danos, N. Alderman, L. Fang and T. Parel
Type: Conference or Workshop Item
| 2012
Processing a twinning-induced plasticity steel by high-pressure torsion - Mariana S. Matoso, Roberto B. Figueiredo, Megumi Kawasaki, Danoberto Santos and Terence G. Langdon
Type: Article
| 2012
| Item not available on this server.
The prevalence and health implications of concha bullosa in a population from mediaeval England - S. Mays, M. Mavrogordato, J. Lambert and J. Sofaer
Type: Article
| 2012
| Item availability restricted.
Micromechanisms of fatigue crack growth in cast aluminium piston alloys - Thomas O. Mbuya, I. Sinclair, A.J. Moffatt and P.A.S. Reed
Type: Article
| 2012
| Item availability restricted.
The effect of dislocation density on the interactions between dislocations and twin boundaries in nanocrystalline materials - S. Ni, Y.B. Wang, X.Z. Liao, R.B. Figueiredo, H.Q. Li, S.P. Ringer, T.G. Langdon and Y.T. Zhu
Type: Article
| 2012
| Item not available on this server.
Type: Article
| 2012
| Item not available on this server.
Ultra high speed full-field deformation measurements on concrete spalling specimens and stiffness identification with the Virtual Fields Method - F. Pierron and P. Forquin
Type: Article
| 2012
| Item not available on this server.
The virtual fields method. Extracting constitutive mechanical parameters from full-field deformation measurements - F. Pierron and Michel Grédiac
Type: Book
| 2012
| Springer
| Item not available on this server.
Three-dimensional characterisation and modelling of small fatigue corner cracks in high strength Al-alloys - Henry Proudhon, A. Moffat, Ian Sinclair and Jean-Yves Buffiere
Type: Article
| 2012
| Item not available on this server.
Prediction of hardness of Al alloys processed by accumulative roll bonding - X.G. Qiao and Marco J. Starink
Type: Article
| 2012
| Item availability restricted.
A model of grain refinement and strengthening of Al alloys due to cold severe plastic deformation - Xiao Guang Qiao, Nong Gao and Marco J. Starink
Type: Article
| 2012
A high-order theory for the analysis of circular cylindrical composite sandwich shells with transversely compliant core subjected to external loads - O. Rahmani, S.M.R. Khalili and O.T. Thomsen
Type: Article
| 2012
| Item not available on this server.
Identification of plastic constitutive parameters at large deformations from three dimensional displacement fields - Marco Rossi and Fabrice Pierron
Type: Article
| 2012
On the use of simulated experiments in designing tests for material characterization from full-field measurements - Marco Rossi and Fabrice Pierron
Type: Article
| 2012
Microstructural evolution and the mechanical properties of an aluminum alloy processed by high-pressure torsion - Shima Sabbaghianrad, Megumi Kawasaki and Terence G. Langdon
Type: Article
| 2012
| Item not available on this server.
Deflected teardrop cracking in nickel based superalloys: sustained macroscopic deflected fatigue crack growth - C. Schoettle, I. Sinclair, M.J. Starink and P.A.S. Reed
Type: Article
| 2012
| Item availability restricted.
Damage accumulation in a carbon/epoxy composite: comparison between a multiscale model and computed tomography experimental results - A.E. Scott, I. Sinclair, S.M. Spearing, A. Thionnet and A. Bunsell
Type: Article
| 2012
| Item availability restricted.
Factors influencing creep flow and ductility in ultrafine-grained metals - V. Sklenicka, J. Dvorak, P. Kral, M. Svoboda, M. Kvapilova and T.G. Langdon
Type: Article
| 2012
| Item not available on this server.
Microstructure and tensile strength of grade 2 titanium processed by equal-channel angular pressing and by rolling - Vitor L. Sordi, Maurizio Ferrante, Megumi Kawasaki and Terence G. Langdon
Type: Article
| 2012
| Item not available on this server.
A model for co-clusters and their strengthening in Al-Cu-Mg based alloys: a comparison with experimental data - M. J. Starink
Type: Article
| 2012
Type: Conference or Workshop Item
| 2012
| Item not available on this server.
A model for the thermodynamics of and strengthening due to co-clusters in Al-Mg-Si based alloys - M.J. Starink, L.F. Cao and P.A. Rometsch
Type: Article
| 2012
Validation and analysis of a model for grain refinement by cold severe plastic deformation - M.J. Starink, Xiaoguang Qiao and N. Gao
Type: Conference or Workshop Item
| 2012
| Item not available on this server.
Moderate speed impact damage to 2D-braided glass–carbon composites - M.P.F. Sutcliffe, C. Monroy Acevesa, W.J. Stronge, R.S. Choudhury, P. Wright and A.E. Scott
Type: Article
| 2012
| Item availability restricted.
Determination of mechanical properties of PVC foam using a modified Arcan fixture - S.T. Taher, O.T. Thomsen, J.M. Dulieu-Barton and S. Zhang
Type: Article
| 2012
| Item not available on this server.
Microstructure, interfaces, composition: towards better microscale experimentation and models of bone - Philipp Thurner, Orestis Katsamenis, Sabah Nobakhti, Orestis Andriotis, Harold M.H. Chong and Georges Limbert
Type: Conference or Workshop Item
| 2012
Bulk nanostructured metals for innovative applications - Ruslan Z. Valiev, Ilchat Sabirov, Alexander P Zhilyaev and Terence G. Langdon
Type: Article
| 2012
| Item not available on this server.
Effect of grain size on the micro-tribological behavior of pure titanium processed by high-pressure torsion - Chuan Ting Wang, Nong Gao, Mark G Gee, Robert J.K. Wood and Terence G. Langdon
Type: Article
| 2012
| Item not available on this server.
Principles of severe plastic deformation using tube high-pressure shearing - J.T. Wang, Z. Li, J. Wang and T.G. Langdon
Type: Article
| 2012
| Item not available on this server.
Influence of pressing temperature on microstructure evolution and mechanical behaviour of ultrafine-grained Cu processing by equal-channel angular pressing - Haiming Wen, Yonghao Zhao, Troy D. Topping, Dustin Ashford, Roberto B. Figueiredo, Cheng Xu, Terence G. Langdon and Enrique J. Lavernia
Type: Article
| 2012
| Item not available on this server.
The stability of halloysite nanotubes in acidic and alkaline aqueous suspensions - Rachel D. White, Dmitry V. Bavykin and F.C. Walsh
Type: Article
| 2012
| Item availability restricted.
Spontaneous scrolling of kaolinite nanosheets into halloysite nanotubes in an aqueous suspension in the presence of GeO2 - Rachel D. White, Dmitry V. Bavykin and Frank C. Walsh
Type: Article
| 2012
| Item availability restricted.
Achieving homogeneity in a Cu–Zr alloy processed by high-pressure torsion - Jittraporn Wongsa-Ngam, Megumi Kawasaki and Terence G. Langdon
Type: Article
| 2012
| Item not available on this server.
The development of hardness homogeneity in a Cu–Zr alloy processed by equal-channel angular pressing - Jittraporn Wongsa-Ngam, Megumi Kawasaki and Terence G. Langdon
Type: Article
| 2012
| Item not available on this server.
Optimizing strength and ductility of Cu-Zn alloys through severe plastic deformation - P. Zhang, A.H. An, Z.J. Zhang, S.D. Wu, S.X. Li, Z.F. Zhang, R.B. Figueiredo, N. Gao and T.G. Langdon
Type: Article
| 2012
| Item not available on this server.
A methodology for obtaining material properties of polymeric foam at elevated temperatures - S. Zhang, J.M. Dulieu-Barton, R.K. Fruehmann and O.T. Thomsen
Type: Article
| 2012
| Item not available on this server.
Predicting the structural stability and formability
of ABO3-Type perovskite compounds using
artificial neural networks - Yiming Zhang, Rick Ubic, Dongfeng Xue and Shoufeng Yang
Type: Article
| 2012
Microstructure and microtexture evolution in pure metals after ultra-high straining - Alexander P. Zhilyaev and Terence G. Langdon
Type: Article
| 2012
| Item not available on this server.