Items where Division is "Faculties (pre 2018 reorg) > Faculty of Engineering and the Environment (pre 2018 reorg) > Mechanical Engineering (pre 2018 reorg) > Engineering Mats & Surface Engineerg Gp (pre 2018 reorg)
Current Faculties > Faculty of Engineering and Physical Sciences > School of Engineering > Mechanical Engineering > Mechanical Engineering (pre 2018 reorg) > Engineering Mats & Surface Engineerg Gp (pre 2018 reorg)
Mechanical Engineering > Mechanical Engineering (pre 2018 reorg) > Engineering Mats & Surface Engineerg Gp (pre 2018 reorg)" and Year is 2018
 | Up a level |
Number of items: 81.
Characterization of precipitates in an Al-Zn-Mg alloy processed by ECAP and subsequent annealing - Mohamed A. Afifi, Ying C. Wang, Pedro Henrique R. Pereira, Yangwei Wang, Shukui Li, Yi Huang and Terence G. Langdon
Type: Article
| 2018
Effect of heat treatments on the microstructures and tensile properties of an ultrafine-grained Al-Zn-Mg alloy processed by ECAP - Mohamed A. Afifi, Ying Chun Wang, Pedro H.R. Pereira, Yi Huang, Yangwei Wang, Xingwang Cheng, Shukui Li and Terence G. Langdon
Type: Article
| 2018
Effect of initial annealing temperature on microstructural development and microhardness in high-purity copper processed by high-pressure torsion - Saleh N. Alhajeri, Abdulla I. Almazrouee, Khaled J. Al-Fadhalah and Terence Langdon
Type: Article
| 2018
A comparison of quasi-static indentation and low-velocity impact on composite overwrapped pressure vessels - Trevor Allen, Sharif Ahmed, Warren Hepples, Philippa A. Reed, Ian Sinclair and Mark Spearing
Type: Article
| 2018
X-ray computed micro-tomography of reticulated vitreous carbon - Luis F. Arenas, Richard P. Boardman, Carlos Ponce De Leon and Frank C. Walsh
Type: Article
| 2018
Type: Dataset
| 2018
| University of Southampton
Ten years of severe plastic deformation (SPD) in Iran, part I: equal-channel angular pressing (ECAP) - E Bagherpour, M Reihanian, N Pardis, R Ebrahimi and Terence Langdon
Type: Article
| 2018
Enhanced grain refinement and microhardness by hybrid processing using hydrostatic extrusion and high-pressure torsion - Piotr Bazarnik, Yi Huang, Malgorzata Lewandowska and Terence G. Langdon
Type: Article
| 2018
Ronald Leslie Bell: 12th September 1929–25th December 2017 - William Bonfield, Terence G. Langdon and Arthur F.W. Willoughby
Type: Article
| 2018
Investigation of recrystallization kinetics by DSC analysis of Mg-Ce alloy after severe plastic deformation - Yousf I. Bourezg, Hiba Azzeddine, Yi Huang, Djamel Bradai and Terence G. Langdon
Type: Conference or Workshop Item
| 2018
| Tanger Ltd.
Texture and microhardness of Mg-Rare Earth (Nd and Ce) alloys processed by high-pressure torsion - Yousf Islem Bourezg, Hiba Azzeddine, Thierry Baudin, Anne-Laure Helbert, Yi Huang, Djamel Bradai and Terence G. Langdon
Type: Article
| 2018
Type: Dataset
| 2018
| Mendeley Data
Image-enhanced modelling of residual compressive after impact strength in laminated composites - Daniel Bull, Simon Spearing and Ian Sinclair
Type: Article
| 2018
Benchmarking of strength models for unidirectional composites under longitudinal tension - Anthony Bunsell, Larissa Gorbatikh, Hannah Morton, Soraia Pimenta, Ian Sinclair, Mark Spearing, Yentl Swolfs and Alain Thionnet
Type: Article
| 2018
Assessing the carbon sequestration potential of basalt using X-ray micro-CT and rock mechanics - Ben, James Callow, Ismael Falcon-Suarez, Sharif Ahmed and Juerg Matter
Type: Article
| 2018
Crack growth analysis in welded and non-welded T-joints based on lock-in digital image correlation and thermoelastic stress analysis - Daoyun Chen, Shouguang Sun, J.M. Dulieu-Barton, Qiang Li and Wenjing Wang
Type: Article
| 2018
| Item not available on this server.
Latest results for elasto-plastic identification at high rates using inertial impact - Sarah Dreuilhe, Frances Davis, Clive Sivour and Fabrice Pierron
Type: Conference or Workshop Item
| 2018
| Springer New York, NY
| Item not available on this server.
Exceptionally high strength and good ductility in an ultrafine-grained 316L steel processed by severe plastic deformation and subsequent annealing - Moustafa EI-Tahawy, Pedro H.R. Pereira, Yi Huang, Hyeji Park, Heeman Choe, Terence G. Langdon and Jenő Gubicza
Type: Article
| 2018
Effect of temperature rise on microstructural evolution during high-pressure torsion - Kaveh Edalati, Yuki Hashiguchi, Pedro Henrique R. Pereira, Zenji Horita and Terence G. Langdon
Type: Article
| 2018
Oxidation behaviour of single crystal nickel-based superalloys: intermediate temperature effects at 450–550°C - A. Evangelou, K.A. Soady, S. Lockyer, N. Gao and P.A.S. Reed
Type: Article
| 2018
| Item not available on this server.
Low temperature superplasticity in ultrafine-grained AZ31 alloy - Roberto B. Figueiredo, Pedro H.R. Pereira and Terence G. Langdon
Type: Article
| 2018
| Item availability restricted.
Type: Dataset
| 2018
| University of Southampton
Type: Dataset
| 2018
| University of Southampton
Image-based high strain rate testing of orthopaedic bone cement - Lloyd Fletcher, Xavier Regal, Rian Seghir, Fabrice Pierron and Martin Browne
Type: Conference or Workshop Item
| 2018
| EDP Sciences
A novel fixture for determining the tension/compression-shear failure envelope of multidirectional composite laminates - Khong Gan, Tobias, Albert Laux, Siavash Talebi Taher, Janice Barton and Ole Thomsen
Type: Article
| 2018
Aluminium Alloys - Nong Gao
Type: Book
| 2018
| MDPI AG
| Item not available on this server.
Controlled release of 5-Fluorouracil from alginate beads encapsulated in 3D printed pH-responsive solid dosage forms - Christos I. Gioumouxouzis, Aikaterini-Theodora Chatzitaki, Christina Karavasili, Orestis L. Katsamenis, Dimitrios Tzetzis, Emmanouela Mystiridou, Nikolaos Bouropoulos and Dimitrios G. Fatouros
Type: Article
| 2018
A damage-based model for mixed-mode crack propagation in composite laminates - J.A. Glud, P.A. Carraro, M. Quaresimin, J.M. Dulieu-Barton, O.T. Thomsen and L.C.T. Overgaard
Type: Article
| 2018
Annealing-induced hardening in ultrafine-grained Ni-Mo alloys - Jenő Gubicza, Pedro H.R. Pereira, Garima Kapoor, Yi Huang, V. Subramanya Sarma and Terence G. Langdon
Type: Article
| 2018
A preliminary study on characterisation of finger interface kinetics using a pressure and shear sensor system - Nicholas Hale, Maria Valero, Jinghua Tang, David Moser and Liudi Jiang
Type: Article
| 2018
Direct bonding of aluminum-copper metals through high-pressure torsion processing - Jae-Kyung Han, DaeKuen Han, Guang Yuan Li, Jae-il Jang, Terence G. Langdon and Megumi Kawaski
Type: Article
| 2018
The influence of chemical heterogeneities on the local mechanical behavior of a high entropy alloy: a micropillar compression study - Anital Heczel, Megumi Kawasaki, Dávid Ugi, Jae-il Jang, Terence G. Langdon and Jenő Gubicza
Type: Article
| 2018
Effect of different initial lamellar plate thicknesses on grain refinement and superplastic behaviour in HPT-processed Ti-6Al-4V alloy - Yi Huang, Jessica Muzy, Piotr Bazarnik, Malgorzata Lewandowska and Terence G. Langdon
Type: Article
| 2018
| Item availability restricted.
Support induced charge transfer effects on electrochemical characteristics of Pt nanoparticle electrocatalysts - Colleen Jackson, Graham Smith, Matthew Markiewicz, David Inwood, Andrew, Stephen Leach, Penny Susan Whalley, Anthony R. Kucernak, Andrea E. Russell, Denis Kramer and Pieter Levecque
Type: Article
| 2018
Effect of high-pressure torsion on the microstructural evolution and mechanical properties of an Fe-10Ni-7Mn (wt. %) lath martensitic steel - Faezeh Javadzadeh, Hamidreza Koohdar, Hamidreza Jafarian, Mahmoud Nili-Ahmadabadi, Yi Huang and Terence G. Langdon
Type: Conference or Workshop Item
| 2018
| AIP Publishing
Strain accumulation and fatigue crack initiation at pores and carbides in a SX superalloy at room temperature - R. Jiang, D.J. Bull, A. Evangelou, A. Harte, F. Pierron, I. Sinclair, M. Preuss, X.T. Hu and P.A.S. Reed
Type: Article
| 2018
| Item not available on this server.
Role of oxygen in enhanced fatigue cracking in a PM Ni-based superalloy: stress assisted grain boundary oxidation or dynamic embrittlment? - R. Jiang, D. Proprentner, M. Callisti, B. Shollock, X.T. Hu, Y.D. Song and P.A.S. Reed
Type: Article
| 2018
Type: Dataset
| 2018
| University of Southampton
Synergetic effects of thin plies and aligned carbon nanotube interlaminar reinforcement in composite laminates - Estelle Kalfon-cohen, Reed Kopp, Carolina Furtado, Xinchen Ni, Albertino Arteiro, Gregor Borstnar, Mark N. Mavrogordato, Ian Sinclair, S. Mark Spearing, Pedro P. Camanho and Brian L. Wardle
Type: Article
| 2018
A diffusion-based approach for modelling crack tip behaviour under fatigue-oxidation conditions - R. J. Kashinga, L. G. Zhao, V. V. Silberschmidt, R. Jiang and P. A.S. Reed
Type: Article
| 2018
Superplastic flow and micro-mechanical response of ultrafine-grained materials - Megumi Kawasaki, Jae-il Jang and Terence G. Langdon
Type: Article
| 2018
| Item availability restricted.
Fabrication of high strength hybrid materials through the application of high-pressure torsion - Megumi Kawaski and Terence G. Langdon
Type: Article
| 2018
Type: Article
| 2018
Impact of small phonon energies on the charge-carrier lifetimes in metal-halide perovskites - Thomas Kirchartz, Tom Markvart, Uwe Rau and David A. Egger
Type: Letter
| 2018
| Item not available on this server.
Fatigue assessment of multilayer coatings using lock-in thermography - Andreu Laborda, Andrew Robinson, Shuncai Wang, Yi Zhang and Philippa Reed
Type: Article
| 2018
Thirty years of superplastic ultrafine-grained materials: examining the legacy of Oscar Kaibyshev - Terence G. Langdon
Type: Article
| 2018
| Item availability restricted.
Observation of thermally driven water flow in soils via micro-focus X-ray Computed Tomography - Kui Liu, Fleur Loveridge, Richard Boardman and William Powrie
Type: Conference or Workshop Item
| 2018
Sheet metals characterization using the virtual fields method - Aleksander Marek, Frances M. Davis and Fabrice Pierron
Type: Conference or Workshop Item
| 2018
| American Institute of Physics
| Item not available on this server.
Type: Dataset
| 2018
| University of Southampton
A practical procedure for measuring the stiffness of foam like materials - Alexander Marter, Alexander Dickinson, Fabrice Pierron and Martin Browne
Type: Article
| 2018
Microstructure and corrosion performance of 316L stainless steel fabricated by selective laser, melting and processed through high-pressure torsion - Shahir Yasin Bin Mohd Yusuf, Mengyan Nie, Ying Chen, Shoufeng Yang and Nong Gao
Type: Article
| 2018
Exploitation of phase change materials for temperature control during the fast filling of hydrogen cylinders - Vishagen Ramasamy, Edward Richardson, Philippa Reed, Warren Hepples and Andrew J. Wheeler
Type: Conference or Workshop Item
| 2018
| Begell House
| Item availability restricted.
Spall strength dependence on grain size and strain rate in tantalum - T.P. Remington, E.N. Hahn, S. Zhao, R. Flanagan, J.C.E. Mertens, S. Sabbaghianrad, Terence G. Langdon, C.E. Wehrenberg, B.R. Maddox, D.C. Swift, B.A. Remington, N. Chawla and M.A. Meyers
Type: Article
| 2018
Microstructural stability and flow properties of an Al-Mg-Sc alloy processed at different temperatures using severe plastic deformation - Pedro, Henrique Rodrigues Pereira
Type: Thesis
| 2018
| University of Southampton
Evaluation of volume deformation from surface DIC measurement - M. Rossi, L. Cortese, K. Genovese, A. Lattanzi, F. Nalli and F. Pierron
Type: Article
| 2018
An investigation of the limits of grain refinement after processing by a combination of severe plastic deformation techniques: a comparison of Al and Mg alloys - Shima Sabbaghianrad, Seyed A. Torbati-Sarraf and Terence G. Langdon
Type: Article
| 2018
A novel image-based ultrasonic test to map material mechanical properties at high strain-rates - Rian Seghir and Fabrice Pierron
Type: Article
| 2018
Features of duplex microstructural evolution and mechanical behavior in the titanium alloy processed by equal-channel angular pressing - Irina P. Semenova, Grigory S. Dyakonov, Georgy I. Raab, Yulia F. Grishina, Yi Huang and Terence G. Langdon
Type: Article
| 2018
Fracture toughness at cryogenic temperatures of ultrafine-grained Ti-6Al-4V alloy processed by ECAP - Irina P. Semenova, Julia M. Modina, Alexander V. Polyakov, Gennady V. Klevtsov, Nataly A. Klevtsova, Irina N. Pigaleva, Ruslan Z. Valiev and Terence G. Langdon
Type: Article
| 2018
Developing superplasticity in high-entropy alloys processed by severe plastic deformation - Hamed Shahmir, Megumi Kawasaki and Terence G. Langdon
Type: Article
| 2018
| Item availability restricted.
Factors influencing superplasticity in the Ti-6Al-4V alloy processed by high-pressure torsion - Hamed Shahmir, Fariba Naghdi, Pedro H.R. Pereira, Yi Huang and Terence G. Langdon
Type: Article
| 2018
Shape memory characteristics of a nanocrystalline TiNi alloy processed by HPT followed by post-deformation annealing - Hamed Shahmir, Mahmoud Nili-Ahmadabadi, Yi Huang, Jai Myun Jung, Hyoung Seop Kim and Terence G. Langdon
Type: Article
| 2018
Effect of Ti on phase stability and strengthening mechanisms of a nanocrystalline CoCrFeMnNi high-entropy alloy - Hamed Shahmir, Mahmoud Nili-Ahmadabadi, Ahad Shafiee, Mariusz Andrzejczuk, Małgorzata Lewandowska and Terence G. Langdon
Type: Article
| 2018
Effect of a minor titanium addition on the superplastic properties of a CoCrFeNiMn high-entropy alloy processed by high-pressure torsion - Hamed Shahmir, Mahmoud Nili-Ahmadabadi, Ahad Shafiee and Terence G. Langdon
Type: Article
| 2018
Effect of carbon content and annealing on structure and hardness of CrFe2NiMnV0.25 high entropy alloys processed by high-pressure torsion - Hamed Shahmir, Еlena Tabachnikova, Аleksey Podolskiy, Mikhail Tikhonovsky and Terence G. Langdon
Type: Article
| 2018
Analysis of hydrogen desorption from linear heating experiments: Accuracy of activation energy determinations - M.J. Starink
Type: Article
| 2018
Exceptional grain refinement in a Mg alloy during high pressure torsion due to rare earth containing nanosized precipitates - W.T. Sun, X.G. Qiao, M.Y. Zheng, Y. He, Nan Hu, C. Xu,, N. Gao and M.J. Starink
Type: Article
| 2018
Altered ageing behaviour of a nanostructured Mg-8.2Gd-3.8Y-1.0Zn-0.4Zr alloy processed by high pressure torsion - W.T. Sun, X.G. Qiao, M.Y. Zheng, C. Xu, S. Kamado, X.J. Zhao, H.W. Chen, N. Gao and M.J. Starink
Type: Article
| 2018
Achieving ultra-high hardness of nanostructured Mg-8.2Gd-3.2Y-1.0Zn-0.4Zr alloy produced by a combination of high pressure torsion and ageing treatment - W.T. Sun, X.G. Qiao, M.Y. Zheng, X.J. Zhao, H.W. Chen, N. Gao and M.J. Starink
Type: Article
| 2018
Type: Dataset
| 2018
| University of Southampton
Type: Dataset
| 2018
| University of Southampton
Infrared thermography for test machine control and material characterisation - James, Edward Thatcher
Type: Thesis
| 2018
| University of Southampton
An EBSD analysis of Fe-36%Ni alloy processed by HPT at ambient and a warm temperature - Kamel Tirsatine, Hiba Azzeddine, Yi Huang, Thierry Baudin, Anne-Laure Helbert, François Brisset, Djamel Bradai and Terence G. Langdon
Type: Article
| 2018
Using post-deformation annealing to optimize the properties of a ZK60 magnesium alloy processed by high-pressure torsion - Seyed A. Torbati-Sarraf, Shima Sabbaghianrad and Terence G. Langdon
Type: Article
| 2018
Studies on the superplasticity effect in Ufa: history and development (in memory of Prof. O.A. Kaibyshev) - Ruslan Z. Valiev, Gennady A Salishchev, Farid Z Utyashev and Terence Langdon
Type: Article
| 2018
| Item availability restricted.
Editorial - Mark Whittaker, Marie Christine Baietto, James Burns, David Nowell, Phillipa Reed and Marion Risbet
Type: Editorial
| 2018
| Item not available on this server.
Microstructure evolution of Al-7wt%Si-2wt%Fe alloy processed by high-pressure torsion - Jittraporn Wongsa-Ngam, Chakkrist Phongphisutthinan and Terence G. Langdon
Type: Article
| 2018
Grain refinement and superplastic flow in a fully lamellar Ti-6Al-4V alloy processed by high-pressure torsion - Wenjing Zhang, Hua Ding, Pedro H.R. Pereira, Yi Huang and Terence G. Langdon
Type: Article
| 2018
Analysis of age hardening precipitates of Al-Zn-Mg-Cu alloys in a wide range of quenching rates using small angle X-ray scattering - Yong Zhang, Daniele Pelliccia, Benjamin Milkereit, Nigel Kirby, Marco J. Starink and Paul A. Rometsch
Type: Article
| 2018
An improved thermal model for characteristics analysis of multi-link ultra-precision press system - Enlai Zheng, Shilu Xie, Jin Zhang, Yue Zhu, Xiao Zhao, Xiangze Lin and Min Kang
Type: Article
| 2018
Influence of inhomogeneity on mechanical properties of commercially pure titanium processed by HPT - Alexandr P. Zhilyaev, Yi Huang, Jose Maria Cabrera and Terence G. Langdon
Type: Article
| 2018
| Item availability restricted.