The University of Southampton
×
Filter your search:
University of Southampton Institutional Repository

Browse by People

Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: First Author/Creator | No Grouping

Influence of stacking-fault energy on microstructural characteristics of ultrafine-grain copper and copper-zinc alloys - Levente Balogh, Tamás Ungár, Yonghao Zhao, Y.T. Zhu, Zenji Horita, Cheng Xu and Terence G. Langdon
Type: Article | 2008 | Item not available on this server.

Type: Article | 2005 | Item not available on this server.

Effect of Mg addition on work hardening behavior of aluminum over a wide range of strain - Nguyen Q. Chinh, Judit Illy, Zsolt Kovács, Zenji Horita and Terence G. Langdon
Type: Conference or Workshop Item | 2002 | Trans Tech Publications Ltd | Item not available on this server.

Grain boundary sliding as a significant mechanism of low temperature plastic deformation in ECAP aluminum - Nguyen Q. Chinh, Gyory Vörös, Peter Szommer, Zenji Horita and Terence G. Langdon
Type: Conference or Workshop Item | 2006 | Trans Tech Publications Ltd | Item not available on this server.

Grain refinement and superplastic flow in an aluminum alloy processed by high-pressure torsion - Sergey V. Dobatkin, Elena N. Bastarache, Genki Sakai, Takeshi Fujita, Zenji Horita and Terence G. Langdon
Type: Article | 2005 | Item not available on this server.

Type: Review | 2024 | Item not available on this server.

Nanomaterials by severe plastic deformation: review of historical developments and recent advances - Kaveh Edalati, Andrea Bachmaier, Victor A Beloshenko, Yan Beygelzimer, Vladimir D. Blank, Walter José Botta, Krzysztof Bryła, Jakub Čížek, Sergiy Divinski, Nariman A Enikeev, Yuri Estrin, Ghader Faraji, Roberto B. Figueiredo, Masayoshi Fuji, Tadahiko Furuta, Thierry Grosdidier, Jenő Gubicza, Anton Hohenwarter, Zenji Horita, Jacques Huot, Yoshifumi Ikoma, Miloš Janeček, Megumi Kawasaki, Petr Král, Shigeru Kuramoto, Terence G Langdon, Daniel R. Leiva, Valery I. Levitas, Andrey Mazilkin, Masaki Mito, Hiroyuki Miyamoto, Terukazu Nishizaki, Reinhard Pippan, Vladimir K. Popov, Elena N Popova, Gencaga Purcek, Oliver Renk, Ádám Révész, Xavier Sauvage, Vaclav Sklenicka, Werner Skrotzki, Boris B. Straumal, Satyam Suwas, Laszlo S. Toth, Nobuhiro Tsuji, Ruslan Z. Valiev, Gerhard Wilde, Michael J. Zehetbauer and Xinkun Zhu
Type: Review | 2022

Effect of temperature rise on microstructural evolution during high-pressure torsion - Kaveh Edalati, Yuki Hashiguchi, Pedro Henrique R. Pereira, Zenji Horita and Terence G. Langdon
Type: Article | 2018

The significance of slippage in processing by high-pressure torsion - Kaveh Edalati, Zenji Horita and Terence G. Langdon
Type: Article | 2009 | Item not available on this server.

Microstructures after processing by aging and ECAP for Al-Mg2Si alloys containing excess Si or Mg - Kazuko Fujita, Takeshi Fujita, Keiichiro Oh-ishi, Kenji Kaneko, Zenji Horita and Terence G. Langdon
Type: Conference or Workshop Item | 2005 | Trans Tech Publications Ltd | Item not available on this server.

Characteristics of diffusion in Al-Mg alloys with ultrafine grain sizes - Takeshi Fujita, Zenji Horita and Terence G. Langdon
Type: Article | 2002 | Item not available on this server.

Diffusion in fine-grained Al alloys having low and high angle grain boundaries - Takeshi Fujita, Zenji Horita and Terence G. Langdon
Type: Conference or Workshop Item | 2002 | Trans Tech Publications Ltd | Item not available on this server.

Diffusion in ultrafine-grained Al-Mg alloys - Tomoyuki Fujita, Hirsashi Hasegawa, Zenji Horita and Terence G. Langdon
Type: Conference or Workshop Item | 2001 | Trans Tech Publications Ltd | Item not available on this server.

Influence of crystal orientation on ECAP of aluminum single crystals - Yukihide Fukuda, Keiichiro Oh-ishi, Minoru Furukawa, Zenji Horita and Terence G. Langdon
Type: Article | 2006 | Item not available on this server.

An investigation of deformation in copper single crystals using equal-channel angular pressing - Minoru Furukawa, Yukhide Fukuda, Keiichiro Oh-ishi, Zenji Horita and Terence G. Langdon
Type: Conference or Workshop Item | 2006 | Trans Tech Publications Ltd | Item not available on this server.

Type: Conference or Workshop Item | 2001 | Item not available on this server.

Type: Conference or Workshop Item | 2007 | Trans Tech Publications Ltd | Item not available on this server.

Factors influencing the shearing patterns in equal-channel angular pressing - Minoru Furukawa, Zenji Horita and Terence G. Langdon
Type: Article | 2002 | Item not available on this server.

Type: Article | 2009 | Item not available on this server.

Type: Article | 2005 | Item not available on this server.

The use of severe plastic deformation for microstructural control - Minoru Furukawa, Zenji Horita, Minoru Nemoto and Terence G. Langdon
Type: Article | 2002 | Item not available on this server.

An investigation of the deformation process during equal-channel angular pressing of an aluminum single crystal - Minoru Furukawa, Yoshiyasu Kawasaki, Yuichi Miyahara, Zenji Horita and Terence G. Langdon
Type: Article | 2005 | Item not available on this server.

Evolution of microstructure and precipitation in heat-treatable aluminium alloys during ECA pressing and subsequent heat treatment - Nong Gao, Marco J. Starink, Minoru Furukawa, Zenji Horita, Cheng Xu and Terence G. Langdon
Type: Conference or Workshop Item | 2006 | Trans Tech Publications

Microstructural evolution in a spray-cast aluminum alloy during equal-channel angular pressing - Nong Gao, Marco J. Starink, Minoru Furukawa, Zenji Horita, Cheng Xu and Terence G. Langdon
Type: Article | 2005

Using ring samples to evaluate the processing characteristics in high-pressure torsion - Yosuke Harai, Kaveh Edalati, Zenji Horita and Terence G. Langdon
Type: Article | 2009 | Item not available on this server.

Microstructural and mechanical characteristics of an AZ61 magnesium alloy processed by high pressure torsion - Yosuke Harai, Masaaki Kai, Kenji Kaneko, Zenji Horita and Terence G. Langdon
Type: Article | 2008 | Item not available on this server.

Influence of rolling on the superplastic behavior of an Al-Mg-Sc alloy after ECAP - Akamatsu Hiroki, Takayoshi Fujinami, Zenji Horita and Terence G. Langdon
Type: Article | 2001 | Item not available on this server.

Type: Article | 2008 | Item not available on this server.

Type: Conference or Workshop Item | 2007 | Trans Tech Publications Ltd | Item not available on this server.

Type: Article | 2005 | Item not available on this server.

A two-step processing route for achieving a superplastic forming capability in dilute magnesium alloys - Zenji Horita, Kiyoshi Matsubara, Koichi Makii and Terence G. Langdon
Type: Article | 2002 | Item not available on this server.

Type: Article | 2008 | Item not available on this server.

Equal-channel angular pressing using plate samples - Masakazu Kamachi, Minoru Furukawa, Zenji Horita and Terence G. Langdon
Type: Article | 2003 | Item not available on this server.

Microstructural evolution in high purity aluminum processed by ECAP - Megumi Kawasaki, Zenji Horita and Terence G. Langdon
Type: Article | 2009 | Item not available on this server.

Type: Article | 2005 | Item not available on this server.

Using severe plastic deformation for grain refinement and superplasticity - Terence G Langdon, Minoru Furukawa, Minoru Nemoto and Zenji Horita
Type: Conference or Workshop Item | 2001 | Trans Tech Publications Ltd | Item not available on this server.

Using equal-channel angular pressing for refining grain size - Terence G. Langdon, Minoru Furukawa, Minoru Nemoto and Zenji Horita
Type: Article | 2000 | Item not available on this server.

Effect of microstructures on tensile properties of AZ31 Mg alloy processed by ECAP - Yuichi Miyahara, Kazuhiko Adachi, Yasuhiro Maehara, Zenji Horita and Terence G. Langdon
Type: Conference or Workshop Item | 2005 | Trans Tech Publications Ltd | Item not available on this server.

Grain refinement and superplasticity in a magnesium alloy processed by equal-channel angular pressing - Yuichi Miyahara, Kiyoshi Matsubara, Zenji Horita and Terence G. Langdon
Type: Article | 2005 | Item not available on this server.

Grain refinement of pure nickel using equal-channel angular pressing - Koji Neishi, Zenji Horita and Terence G. Langdon
Type: Article | 2002 | Item not available on this server.

Microstructural control of an Al-Mg-Si alloy using equal-channel angular pressing - Keiichiro Oh-ishi, Yukihiro Hashi, Akiko Sadakata, Kenji Kaneko, Zenji Horita and Terence G. Langdon
Type: Conference or Workshop Item | 2002 | Trans Tech Publications Ltd | Item not available on this server.

Grain boundary structure in Al-Mg and Al-Mg-Sc alloys after equal-channel pressing - Keiichiro Oh-ishi, Zenji Horita, David J. Smith and Terence G. Langdon
Type: Article | 2001 | Item not available on this server.

The ageing characteristics of an Al-Ag alloy processed by equal-channel angular pressing - Kunihiro Ohashi, Takeshi Fujita, Kenji Kaneko, Zenji Horita and Terence G. Langdon
Type: Article | 2006 | Item not available on this server.

Low-temperature superplasticity in Al alloys processed by equal-channel angular pressing - Satoshi Ota, Hiroki Akamatsu, Koji Neishi, Minoru Furukawa, Zenji Horita and Terence G. Langdon
Type: Article | 2002 | Item not available on this server.

Type: Article | 2005 | Item not available on this server.

Application of high pressure torsion to bulk samples - Genki Sakai, Katsuaki Nakamura, Zenji Horita and Terence G. Langdon
Type: Book Section | 2006 | Trans Tech Publications Ltd | Item not available on this server.

Developing high-pressure torsion for use with bulk samples - Genki Sakai, Katsuaki Nakamura, Zenji Horita and Terence G. Langdon
Type: Article | 2005 | Item not available on this server.

Microstructural developments in a spray-cast Al-7034 alloy processed by equal-channel angular pressing - Marco J. Starink, Nong Gao, Minoru Furukawa, Zenji Horita, Cheng Xu and Terrence G. Langdon
Type: Article | 2004 | Item not available on this server.

Microdiffraction to detemine grain sizes at selected postitions in disks precessed by high-pressure torsion - Tamás Ungár, Levente Belogh, Yuntian T. Zhu, Zenji Horita, Cheng Xu and Terence G Langdon
Type: Article | 2007 | Item not available on this server.

Producing bulk ultrafine-grained materials by severe plastic deformation - Ruslan Z. Vaiev, Yuri Estrin, Zenji Horita, Terence G. Langdon, Michael J. Zehetbauer and Yuntian T. Zhu
Type: Article | 2006 | Item not available on this server.

Producing bulk ultrafine-grained materials by severe plastic deformation: ten years later - Ruslan Z. Valiev, Yuri Estrin, Zenji Horita, Terence G. Langdon, Michael J. Zehetbauer and Yuntian Zhu
Type: Article | 2016 | Item not available on this server.

Superplastic flow in a nanostructured aluminum alloy produced using high-pressure torsion - Cheng Xu, Sergey V. Dobatkin, Zenji Horita and Terence G. Langdon
Type: Article | 2009 | Item not available on this server.

Developing a superplastic forming capability in nanometals. - Cheng Xu, Minoru Furukawa, Zenji Horita and Terence G. Langdon
Type: Book Section | 2005 | Trans Tech Publications Ltd | Item not available on this server.

Developing high strain rate superplasticity in aluminum alloys - Cheng Xu, Minoru Furukawa, Zenji Horita and Terence G. Langdon
Type: Conference or Workshop Item | 2005 | Trans Tech Publications Ltd | Item not available on this server.

Type: Article | 2005 | Item not available on this server.

Influence of ECAP on precipitate distributions in a spray-cast aluminum alloy - Cheng Xu, Minoru Furukawa, Zenji Horita and Terence G. Langdon
Type: Article | 2005 | Item not available on this server.

Type: Article | 2003 | Item not available on this server.

Type: Article | 2008 | Item not available on this server.

Type: Article | 2008 | Item not available on this server.

The evolution of homogeneity in processing by high-pressure torsion - Cheng Xu, Zenji Horita and Terence G. Langdon
Type: Article | 2007 | Item not available on this server.

Type: Article | 2011 | Item not available on this server.

Mechanical properties of a spray-cast aluminum alloy processed by severe plastic deformation - Cheng Xu, Megumi Kawasaki, Minoru Furukawa, Zenji Horita and Terence G. Langdon
Type: Conference or Workshop Item | 2007 | Trans Tech Publications Ltd | Item not available on this server.

Factors influencing the development of homogeneity in disks processed by high-pressure torsion - Cheng Xu, Alexander P. Zhilyaev, Zenji Horita and Terence G. Langdon
Type: Article | 2008 | Item not available on this server.

Type: Article | 2009 | Item not available on this server.

This list was generated on Thu Jan 1 08:08:51 2026 GMT.
Atom RSS 1.0 RSS 2.0

Contact ePrints Soton: eprints@soton.ac.uk

ePrints Soton supports OAI 2.0 with a base URL of http://eprints.soton.ac.uk/cgi/oai2

This repository has been built using EPrints software, developed at the University of Southampton, but available to everyone to use.

We use cookies to ensure that we give you the best experience on our website. If you continue without changing your settings, we will assume that you are happy to receive cookies on the University of Southampton website.

×