Items where Division is "Current Faculties > Faculty of Engineering and Physical Sciences > School of Engineering > Mechanical Engineering > Engineering Materials and Surface Engineering Group
Mechanical Engineering > Engineering Materials and Surface Engineering Group" and Year is 2024
 | Up a level |
Number of items: 47.
School of Engineering Young Researchers Conference Proceedings - Adnan Akhtar, Esma Akis, Ahmed Al-Shuaili, Yousif Alyousif, Zia Arif, Beth Austin, Ismail Aydemir, Abigail Bateman, Joseph S. P. Binns, Hesam Boroomand, Lois Leigh Brewer, Fengyuan Cao, Rebecca Morgan Cheetham, Bethan Frances Collins, Jamie Crispin, Kirstie M. Devin, Zizhou Ding, Joseph Constantine Doyle, Oliver James Gould, Joshua Hooper, Saeed Hosseinzadeh, Matthew Hulbert, Kimoon Jang, Karam Kalsi, Ahmet Nihat Karci, Asadullah Khan, Busra Kocak Erdem, Dariusz Konrad Kosk, Changhoon Lee, Yeajin Lee, Kenneth Leung, Daniel Danyang Li, Donnchadh Eoghan MacGarry, Imali Udeshika Manikarachchi Manikarachchige, Soumyadeep Mondal, Hamish Thomas Mcneil Moodley, Thomas Francis Munro-O'Brien, Dibyojyoty Nath, Harris Nikolaou, Molly Alexandra Phillips, Tararag Pincam, Rebecca Sophie Presswood, Lucas Queiroz Machado, Rosemary Reed, Gregory Peter Sewell, Aditi Sharma, Aradhana Singh, Sam Peter Sloan, Yutong Song, Katherine Theobald, Ram Kumar Venkateswaran, Delin Wang, Tairan Wang, Hao Yao Wong, Niamh Ruby Abigail Yates, Muhammad Zalkifal, Ziliang Zhang and Kunyi Zheng
Type: Conference or Workshop Item
| 2024
Recrystallization and grain growth activation energies in a hybrid magnesium material fabricated by high-pressure torsion - Hiba Azzeddine, Marie-Noëlle Avettand-Fènoël, Piotr Bazarnik, Thierry Baudin, Yi Huang and Terence G. Langdon
Type: Article
| 2024
| Item availability restricted.
Estimating dislocation density from electron backscatter diffraction data for an AZ31/Mg-0.6Gd hybrid alloy fabricated by high-pressure torsion - Thierry Baudin, Hiba Azzeddine, François Brisset, Yi Huang and Terence G Langdon
Type: Article
| 2024
| Item availability restricted.
Enhanced mechanical properties and microstructural stability of ultrafine-grained biodegradable Zn-Li-Mn-Mg-Cu alloys produced by rapid solifictaion and high-pressure torsion - Wiktor Bednarczyka, Maria Watroba, Grzegorz Cieślak, Marta Ciemiorek, Kamila Hamulka, Claudia Schreiner, Renato Figi, Marianna Marciszko-Wiąckowskad, Grzegorz Cios, Jakob Schwiedrzik, Johann Michler, Nong Gao, Malgorzata Lewandowska and Terence G. Langdon
Type: Article
| 2024
Defect microstructure evolution in an immiscible composite Cu43%Cr alloy after high-pressure torsion and annealing using positron annihilation spectroscopy - I. Bibimounea, E. Hirschmann, M.O. Liedke, A. Wagner, M. Kawasaki, T. Baudin, I. Mkinsi, K. Abib, Yi Huang, T.G. Langdon and D. Bradai
Type: Article
| 2024
| Item availability restricted.
Three-dimensional culture modelling reveals divergent Mycobacterium tuberculosis virulence and antimicrobial treatment response - Magdalena K. Bielecka, Liku B. Tezera, Eleni Konstantinopoulou, Nicola Casali, Orestis L. Katsamenis, Ximena Gonzalo, Francis Drobniewski and Paul T. Elkington
Type: Article
| 2024
In silico simulations of diffusion tensors and tortuosity in cells grown on 3D-printed scaffolds for tissue engineering - Topaz A.A. Cartlidge, Yan Wu, Thomas B.R. Robertson, Orestis L. Katsamenis and Giuseppe Pileio
Type: Article
| 2024
Correlation between microstructure, magnetic properties and mechanical behavior of the permimphy alloy after high-pressure torsion - Oussama Dabou, Thierry Baudin, François Brisset, Thierry Waeckerlé, Yanick Ateba Betanda, Yi Huang, Anne-Laure Helbert, Djamel Bradai and Terence G. Langdon
Type: Article
| 2024
| Item availability restricted.
Intelligent body interface for lower-limb prosthetics - Kirstie Devin
Type: Thesis
| 2024
| University of Southampton
| Item availability restricted.
Type: Dataset
| 2024
| University of Southampton
Assessment of 3D printed mechanical metamaterials for prosthetic liners - Kirstie Devin, Jinghua Tang and Andrew R. Hamilton
Type: Article
| 2024
A systematic review and meta-analysis of the pathology underlying aneurysm enhancement on vessel wall imaging - Ronneil Digpal, Kenton P. Arkill and Regan Doherty
Type: Review
| 2024
Severe plastic deformation for producing Superfunctional ultrafine-grained and heterostructured materials: An interdisciplinary review - Kaveh Edalati, Anwar Q. Ahmed and Saeid Akrami
Type: Review
| 2024
| Item not available on this server.
The influence of graphene oxide on the microstructure and properties of ultrafine-grained copper processed by high-pressure torsion - Maria Emerla, Piotr Bazarnik, Yi Huang, Anita Wojciechowska, Marta Ciemiorek, Jaroslaw Pura, Monika Wieczorek-Czarnocka, Purbayanto Muhammad Abiyyu Kenichi, Agnieszka Jastrzebska, Malgorzata Lewandowska and Terence G. Langdon
Type: Article
| 2024
DSC analysis of dissolution reaction in an as-cast and HPT-processed Mg-Gd alloy - Abdelkader Hanna, Hiba Azzeddine, Marie-Noëlle Avettand-Fènoël, Thierry Baudin, Yi Huang and Terence G. Langdon
Type: Article
| 2024
| Item availability restricted.
Enhancing the efficacy of NovaMin® for Dentine hypersensitivity through particle size reduction and enhanced microbranch tubule mapping - Bethany Harding
Type: Thesis
| 2024
| University of Southampton
| Item availability restricted.
Type: Dataset
| 2024
| University of Southampton
Computed tomography reconstructions of burrow networks for the Opheliid polychaete, Armandia cirrhosa - Rebecca M. Howman, Mark N. Mavrogordato, Fernando Alvarez-Borges and Martin Solan
Type: Article
| 2024
The efficacy of custom‑made offloading devices for diabetic foot ulcer prevention: a systematic review - Aled Wyn Jones, Abraham Makanjuola, Nathan Bray, Yeliz Prior, Daniel Parker, Christopher Nester, Jinghua Tang and Liudi Jiang
Type: Review
| 2024
An ultra high-endurance memristor using back-end-of-line amorphous SiC - Omesh Kapur, Dongkai Guo, Jamie Reynolds, Daniel William Newbrook, Yisong Han, Richard Beanland, Liudi Jiang, C.H. Kees De Groot and Ruomeng Huang
Type: Article
| 2024
Type: Dataset
| 2024
| Zenodo
| Item not available on this server.
Texture and microstructural evolution in an Al-6061 alloy processed by high-pressure torsion - Abdelkader Khalfallah, Hiba Azzeddine, Thierry Baudin, François Brisset, Yi Huang and Terence G. Langdon
Type: Article
| 2024
| Item availability restricted.
Improving the strength and surface properties of TNTZ alloy through a combination of high-pressure torsion and laser surface treatment - Hsuan-Kai Lin, Tsai-Hsuan Hsieh, Yi-Hong Cheng, Piotr Bazarnik, Chuan Ting Wang, Yi Huang, Jing Ye, Amor Abdelkader and Terence G. Langdon
Type: Article
| 2024
| Item availability restricted.
Hard X-ray nanoscale imaging of carbon fibre composites using Near-Field Ptychography - Marco Margini, Dmitry Karpov, Yentl Swolfs, Christian Breite, Yeajin Lee, Mark Mavrogordato, Ian Sinclair, S. Mark Spearing, Peter Cloetens and Pierre Thibault
Type: Conference or Workshop Item
| 2024
| Item not available on this server.
Tuning the work function of graphite nanoparticles via edge termination - Michael P. Mercer, Arihant Bhandari, Chao Peng, Jacek Dziedzic, Chris K. Skylaris and Denis Kramer
Type: Article
| 2024
Model-experiment comparison of quasi static loading on a composite overwrap pressure vessel (part 2) - Erick Montes De Oca Valle, S.M. Spearing, Ian Sinclair, Trevor Allen and Warren Hepples
Type: Article
| 2024
Preliminary assessment of timed up and go (tug) and cognitive-tug test based on lower limb biomechanics - Elana Anthea Nerwich, Peiru Xu, Hesam Boroomand, Jinghua Tang and Liudi Jiang
Type: Conference or Workshop Item
| 2024
| Item not available on this server.
Primary recrystallization of a magnesium hybrid material fabricated by high-pressure torsion - Ouarda Ould Mohamed, Piotr Bazarnik, Yi Huang, Hiba Azzeddine, Thierry Baudin, François Brisset, Megumi Kawasaki and Terence G Langdon
Type: Article
| 2024
| Item availability restricted.
Understanding process parameter-induced variability for tailoring precipitation behavior, grain structure, and mechanical properties of Al-Mg-Si-Mn alloy during solid-state additive manufacturing - Abhishek Pariyar, Evren Yasa, Adrian Sharman, Chandra S. Perugu, Liang Yuan, James Hughes and Dikai Guan
Type: Article
| 2024
The role of processing temperature for achieving superplastic properties in an Al-3Mg-0.2Sc alloy processed by high-pressure torsion - Pedro Henrique R. Pereira, Piotr Bazarnik, Yi Huang, Malgorzata Lewandowska and Terence G Langdon
Type: Article
| 2024
| Item availability restricted.
A bioengineering investigation of cervical collar design and fit: implications on skin health - Laurence J. Russell, Tamara Dodd, Daniel Kendall, Amber Lazenbury, Abigail Leggett, Sophie Payton-Haines, Liudi Jiang, Davide Filingeri and Peter R. Worsley
Type: Article
| 2024
Pressure distribution at the device skin interface of a cervical collar: finite element and physical modelling - Laurence Jeppe Russell, Davide Filingeri, Liudi Jiang and Pete Worsley
Type: Conference or Workshop Item
| 2024
Mechanisms of low temperature dislocation motion in high-entropy Al0.5CoCrCuFeNi alloy - Yuri. O. Semerenko, Vasilij D. Natsik, Elena D. Tabachnikova, Yi Huang and Terence G. Langdon
Type: Article
| 2024
Evaluation of hand action classification performance using machine learning based on signals from two sEMG electrodes - Hope O. Shaw, Kirstie Devin, Jinghua Tang and Liudi Jiang
Type: Article
| 2024
Type: Dataset
| 2024
| University of Southampton
Effect of V content on the microstructure and mechanical properties of HPT nanostructured CoCrFeMnNiVx high entropy alloys - Elena D. Tabachnikova, Sergej N. Smirnov, Yuriy O. Shapovalov, Igor V. Kolodiy, Anastasia V. Levenets, Mikhail A. Tikhonovsky, Michael J. Zehetbauer, Christian Rentenberger, Erhard Schafler, Yi Huang and Terence G. Langdon
Type: Article
| 2024
| Item availability restricted.
Assessing localised multi-directional plantar stresses across different terrains using a wearable insole system - Jinghua Tang, Daniel Parker, Chris Nester and Liudi Jiang
Type: Conference or Workshop Item
| 2024
| Item not available on this server.
Recent developments in the use of high pressures for the production of nanostructured materials - Chuan Ting Wang, Zheng Li, Jing Tao Wang and Terence G. Langdon
Type: Review
| 2024
Manipulating the mechanical strength and thermal conductivity of a Mg–4Zn-0.6Zr alloy through Ca addition - Kaicheng Wang, Xingjian Zhao, Jie Yin, Fang Yi, Ruifeng Li, Dikai Guan and Yonghao Gao
Type: Article
| 2024
Comparison of fatigue crack growth behaviour in electron-beam and laser powder-bed-fusion Inconel 718 - Qiuyi Wang, Rui Bao and Binchao Liu
Type: Article
| 2024
Three-dimensional reconstruction of high latitude bamboo coral via x-ray microfocus computed tomography - Thomas J. Williams, Philip J. Basford, Orestis L. Katsamenis, Martin Solan, Gavin Foster, Christopher Standish, Jasmin Godbold and Philippe Archambault
Type: Article
| 2024
Geochemical proxies for deep-sea temperature and nutrient content in cold-water bamboo corals - Thomas J. Williams, Christopher D. Standish, Philippe Archambault, Jasmin A. Godbold, Martin Solan, Orestis L. Katsamenis, Philip J. Basford and Gavin L. Foster
Type: Article
| 2024
Effects of micro-alloying Ag on microstructure, mechanical properties and corrosion behavior of extruded Mg-2Zn-0.2Ca-xAg alloys - Jie Yin, Miao Li, Fang Yi, Xingjian Zhao, Dikai Guan, Kaicheng Wang, Yonghao Gao and Chuming Liu
Type: Article
| 2024
Dependence of microstructure evolution of novel CoreFlow™ aluminium alloy wire on wire diameter - Liang Yuan, Xun Zeng, Xingjian Zhao, Yanheng Xie, Joao Gandra and Dikai Guan
Type: Article
| 2024
Track-Rex: a universal toolbox for tracking recrystallization nucleation and grain growth behaviors in polycrystalline materials - Xun Zeng, Haoran Yi, Zhuoran Zeng, Liang Yuan, Sangbong Yi, Junheng Gao, Mark Rainforth and Dikai Guan
Type: Article
| 2024
| Item availability restricted.
Insights into primary carbides and nanoparticles in an additively manufactured high-alloy steel - Huayue Zhang, Hui Peng, Paul A.J. Bagot, Yiqiang Wang, Diego Alba Venero, Stuart Robertson, Gebril M.A.M. El-Fallah, Hongbo Guo, Michael P. Moody and Bo Chen
Type: Article
| 2024
A novel strategy for fabricating phase transforming NiTi shape memory alloy via multiple processes of severe plastic deformation - Jintao Zhang, Shibo Wang, Peng Hu, Yu Zhang, Hua Ding and Yi Huang
Type: Article
| 2024
| Item availability restricted.