Items where Division is "Faculties (pre 2018 reorg) > Faculty of Engineering and the Environment (pre 2018 reorg) > Mechanical Engineering (pre 2018 reorg) > Engineering Mats & Surface Engineerg Gp (pre 2018 reorg)
Current Faculties > Faculty of Engineering and Physical Sciences > School of Engineering > Mechanical Engineering > Mechanical Engineering (pre 2018 reorg) > Engineering Mats & Surface Engineerg Gp (pre 2018 reorg)
Mechanical Engineering > Mechanical Engineering (pre 2018 reorg) > Engineering Mats & Surface Engineerg Gp (pre 2018 reorg)" and Year is 2000
 | Up a level |
Number of items: 49.
B
A discussion of flow mechanisms in superplastic yttria-stabilised tetragonal zirconia - M.Z. Berbon and T.G. Langdon
Type: Conference or Workshop Item
| 2000
| Materials Research Society
| Item not available on this server.
An examination of the deformation process in equal-channel angular pressing. - P.B. Berbon, M. Furukawa, Z. Horita, M. Nemoto and T.G. Langdon
Type: Conference or Workshop Item
| 2000
| Materials Research Society
| Item not available on this server.
Type: Conference or Workshop Item
| 2000
| The Minerals, Metals & Materials Society
| Item not available on this server.
F
Superplasticity of untrafine-grained Al-3% Mg-0.2% Sc alloy produced by equal-channel angular pressing - T. Fujita, S. Komura, Z. Horita and T.G. Langdon
Type: Article
| 2000
| Item not available on this server.
Achieving superplasticity at high strain rates using equal channel angular pressing - M. Furukawa, Z. Horita, M. Nemoto and T.G. Langdon
Type: Article
| 2000
| Item not available on this server.
Factors influencing the development of ultrafine grained materials through severe plastic deformation - M. Furukawa, Z. Horita, M. Nemoto and T.G. Langdon
Type: Conference or Workshop Item
| 2000
| The Minerals, Metals & Materials Society
| Item not available on this server.
Grain refinement by equal-channel angular pressing and superplasticity - M. Furukawa, Z. Horita, M. Nemoto and T.G. Langdon
Type: Article
| 2000
| Item not available on this server.
Processing by equal-channel angular pressing: potential for achieving superplasticity - M. Furukawa, M. Nemoto, Z. Horita and T.G. Langdon
Type: Conference or Workshop Item
| 2000
| Materials Research Society
| Item not available on this server.
H
Effects of grain and precipitate size variation on creep-fatigue behaviour of Udimet 720Li in both air and vacuum - N.J. Hide, M.B. Henderson and P.A.S. Reed
Type: Conference or Workshop Item
| 2000
| Minerals, Metals and Materials Society
| Item not available on this server.
Equal-channel angular pressing of commercial aluminum alloys: grain refinement, thermal stability and tensile properties - Z. Horita, T. Fujinami, M. Nemoto and T.G. Langdon
Type: Article
| 2000
| Item not available on this server.
Superplastic forming at high strain rates after severe plastic deformation - Z. Horita, M. Furukawa, M. Nemoto, A.J. Barnes and T.G. Langdon
Type: Article
| 2000
| Item not available on this server.
Development of fine grained structures using severe plastic deformation - Z. Horita, M. Furukawa, M. Nemoto and T.G. Langdon
Type: Article
| 2000
| Item not available on this server.
Grain refinement of aluminum using equal-channel angular pressing - Z. Horita, M. Furukawa, M. Nemoto and T.G. Langdon
Type: Conference or Workshop Item
| 2000
| Materials Research Society
| Item not available on this server.
Characterization of ultrafine-grained structures produced by severe plastic deformation - Z. Horita, M. Furukawa, M. Nemoto, R.Z. Valiev and T.G. Langdon
Type: Conference or Workshop Item
| 2000
| Kluwer Academic Publishers
| Item not available on this server.
Type: Article
| 2000
| Item not available on this server.
J
Characterisation of cubic boron nitride films at different stages of deposition - Liudi Jiang, A.G. Fitzgerald, M.J. Rose, A. Lousa and S. Gimeno
Type: Article
| 2000
| Item not available on this server.
Microstructural influences on fatigue crack initiation and early growth behaviour in plain bearing Al-based linings - M.R. Joyce, S. Syngellakis and P.A.S. Reed
Type: Conference or Workshop Item
| 2000
| Trans Tech Publications Ltd
| Item not available on this server.
K
Influence of scandium on superplastic ductilities in an Al-Mg-Sc alloy - S. Komura, Z. Horita, M. Furukawa, M. Nemoto and T.G. Langdon
Type: Article
| 2000
| Item not available on this server.
L
Identifying creep mechanisms at low stresses - T.G. Langdon
Type: Article
| 2000
| Item not available on this server.
Type: Conference or Workshop Item
| 2000
| Minerals, Metals, & Materials Society
| Item not available on this server.
Type: Conference or Workshop Item
| 2000
| Trans Tech Publications Ltd
| Item not available on this server.
Microstructural Evolution during processing by severe plastic deformation - T.G. Langdon, M. Furukawa, Z. Horita and M. Nemoto
Type: Book Section
| 2000
| Kluwer Academic Publishers
| Item not available on this server.
Using equal-channel angular pressing for refining grain size - Terence G. Langdon, Minoru Furukawa, Minoru Nemoto and Zenji Horita
Type: Article
| 2000
| Item not available on this server.
Influence of equal-channel angular pressing on the superplastic properties of commercial aluminum alloys - S. Lee and T.G. Langdon
Type: Conference or Workshop Item
| 2000
| Materials Research Society
| Item not available on this server.
Electrochemical deposition of polypyrrole on patterned self-assembled monolayers - Xiaohong Li, Xiaogang Zhang, Qiaoyu Sun, Weigang Lü and Hulin Li
Type: Article
| 2000
| Item not available on this server.
Analysis of precipitation and dissolution in overaged 7xxx aluminium alloys using DSC - Xiaomei Li and M.J. Starink
Type: Conference or Workshop Item
| 2000
| Trans Tech Publications
Type: Article
| 2000
| Item not available on this server.
Anomalous crack shape development (tear drop cracking) in turbine disc material Udimet 720 - M. Loo-Morrey and P.A.S. Reed
Type: Article
| 2000
| Item not available on this server.
M
Microbial detachment from biofilms. - G.F. Moore, B.C. Dunsmore, S.M. Jones, C.W. Smejkal, J. Jass, P. Stoodley and H.M. Lappin-Scott
Type: Book Section
| 2000
| Cambridge University Press
| Item not available on this server.
N
Development of a multi-pass facility for equal-channel angular processing to high total strains - K. Nakashima, Z. Horita, M. Nemoto and T.G. Langdon
Type: Article
| 2000
| Item not available on this server.
P
Creep strength and ductility of an AZ 91 alloy and it's composite - M. Pahutová, V. Sklenicka, K. Kucharová, J. Brezina, M. Svoboda and T.G. Langdon
Type: Conference or Workshop Item
| 2000
| Magnesium Research Institute
| Item not available on this server.
The model of grain boundary partial melting and it's applications for high strain rate superplasticity characteristics - V.N. Pervezentsev, T.G. Langdon and J.V. Svirina
Type: Conference or Workshop Item
| 2000
| Item not available on this server.
A numerical and experimental study of woven composite pin-joints - F. Pierron, F. Cerisier and M. Grediac
Type: Article
| 2000
| Item not available on this server.
Identification of the through-thickness moduli of thick composites from whole-field measurements using the Iosipescu fixture: theory and simulations - F. Pierron and M. Grédiac
Type: Article
| 2000
| Item not available on this server.
Identification of the through-thickness properties of thick laminated tubes using the virtual fields method - Fabrice Pierron, Sergei Zhavoronok and Michel Grédiac
Type: Article
| 2000
| Item not available on this server.
Comparison of anionic membranes used to concentrate nitric acid to beyond the azeotropic mixture - Carlos Ponce de Leon and Robert Field
Type: Article
| 2000
On the determination of limiting current density from uncertain data - Carlos Ponce de Leon and Robert Field
Type: Article
| 2000
R
Type: Article
| 2000
| Item availability restricted.
Fatigue crack path prediction in Udimet 720 nickel based alloy single crystals - P.A.S. Reed, X.D. Wu and I. Sinclair
Type: Article
| 2000
| Item not available on this server.
S
Flow mechanisms in creep of an AZ91 magnesium based composite - V. Sklenicka, M. Pahutová, K. Kucharová, M. Svoboda and T.G. Langdon
Type: Book Section
| 2000
| Wiley-VCH Verlag
| Item not available on this server.
Creep of reinforced and unreinforced AZ91 magnesium alloy - V. Sklenička, M. Pahutová, K. Kuchařová, M. Svoboda and T.G. Langdon
Type: Book Section
| 2000
| Trans Tech Publications Ltd
| Item not available on this server.
Lead deposition onto fractured vitreous carbon: influence of electrochemical pretreated electrode - Eliceo Sosa, Gilberto Carreño, Carlos Ponce de Leon, Mercedes Oropeza, Miguel Morales, Ignacio González and Nikola Batina
Type: Article
| 2000
Creep behaviour of a superplastic Y TZP/Al ²°³composite: an examination of the possibility of diffusion creep - S.S. Sosa and T.G. Langdon
Type: Conference or Workshop Item
| 2000
| Materials Research Society
| Item not available on this server.
Environmental and genetic factors influencing biofilm structure - P. Stoodley, Luanne Hall-Stoodley, J.D. Boyle, F. Jorgensen and H.M. Lappin-Scott
Type: Book Section
| 2000
| Cambridge University Press
Influence of flow on the structure of bacterial biofilms. - Paul Stoodley, John D. Boyle and Hilary M. Lappin-Scott
Type: Conference or Workshop Item
| 2000
| Atlantic Canada Society for Microbial Ecology
Type: Book Section
| 2000
| Trans Tech Publications Ltd
| Item not available on this server.
W
Superplastic properties of an aluminum-based alloy after equal-channel angular pressing - J. Wang, P.B. Berbon, Y. Xu, L. Wang and T.G. Langdon
Type: Conference or Workshop Item
| 2000
| Materials Research Society
| Item not available on this server.
Y
Factors affecting grain refinement in equal-channel angular pressing - D. Yamaguchi, Z. Horita, T. Fujinami, M. Nemoto and T.G. Langdon
Type: Conference or Workshop Item
| 2000
| Trans Tech Publications Ltd
| Item not available on this server.
Influence of pressing temperature on microstructural development in equal-channel angular pressing - A. Yamashita, D. Yamaguchi, Z. Horita and T.G. Langdon
Type: Article
| 2000
| Item not available on this server.