Items where Division is "Faculties (pre 2018 reorg) > Faculty of Engineering and the Environment (pre 2018 reorg) > Mechanical Engineering (pre 2018 reorg) > Engineering Mats & Surface Engineerg Gp (pre 2018 reorg)
Current Faculties > Faculty of Engineering and Physical Sciences > School of Engineering > Mechanical Engineering > Mechanical Engineering (pre 2018 reorg) > Engineering Mats & Surface Engineerg Gp (pre 2018 reorg)
Mechanical Engineering > Mechanical Engineering (pre 2018 reorg) > Engineering Mats & Surface Engineerg Gp (pre 2018 reorg)" and Year is 2006
 | Up a level |
Number of items: 120.
A
Microstructural factors affecting fatigue initiation in various Al based bearing alloys - M.S. Ali, P.A.S. Reed, S. Syngellakis, Andrew Moffat and Carl Perrin
Type: Conference or Workshop Item
| 2006
| Trans Tech Publications Ltd
| Item not available on this server.
B
Environmental factors affecting the marine corrosion performance of nickel aluminium bronze - Rakesh Chandra Barik
Type: Thesis
| 2006
| Item availability restricted.
Protonated titanates and TiO2 nanostructured materials: synthesis, properties, and applications - D.V. Bavykin, J.M. Friedrich and F.C. Walsh
Type: Article
| 2006
| Item not available on this server.
Deposition of Pt, Pd, Ru and Au on the surfaces of titanate nanotubes - Dmitry V. Bavykin, Alexei A. Lapkin, Pawel K. Plucinski, Laura Torrente-Murciano, Jens M. Friedrich and Frank C. Walsh
Type: Article
| 2006
| Item not available on this server.
The feasibility of using electrostatic monitoring to identify diesel lubricant additives and soot contamination intercations by factorial analysis - J.E. Booth, K.D. Nelson, T.J. Harvey, R.J.K. Wood, L. Wang, H.E.G. Powrie and J.G. Martinez
Type: Article
| 2006
| Item availability restricted.
Type: Thesis
| 2006
Type: Article
| 2006
C
Experimental identification of a nonlinear model for composites using the grid technique coupled to the virtual fields method - H. Chalal, S. Avril, F. Pierron and F. Meraghni
Type: Article
| 2006
| Item not available on this server.
Biomimetic approach to the design of the marine antifouling coatings - L.D. Chambers, F.C. Walsh, R.J.K. Wood and K.R. Stokes
Type: Conference or Workshop Item
| 2006
| Institute of Marine Engineering, Science and Technology
| Item not available on this server.
The effects of marine natural product extracts in a paint system - L.D. Chambers, R.J.K. Wood, F.C. Walsh and K.R. Stokes
Type: Conference or Workshop Item
| 2006
| Item not available on this server.
Modern approaches to marine antifouling coatings - Lily D. Chambers, Keith R. Stokes, Frank C. Walsh and Robert J.K. Wood
Type: Article
| 2006
Experimental evidence for grain boundary sliding in ultrafine-grained aluminum processed by severe plastic deformation - N.Q. Chinh, P. Szommer, Z. Horita and T.G. Langdon
Type: Article
| 2006
| Item not available on this server.
Flow processes at low temperatures in ultrafine-grained aluminum - Nguyen Q. Chinh, Péter Szommer, Tamás Csanádi and Terence G. Langdon
Type: Article
| 2006
| Item not available on this server.
Grain boundary sliding as a significant mechanism of low temperature plastic deformation in ECAP aluminum - Nguyen Q. Chinh, Gyory Vörös, Peter Szommer, Zenji Horita and Terence G. Langdon
Type: Conference or Workshop Item
| 2006
| Trans Tech Publications Ltd
| Item not available on this server.
D
Characterisation of fluorescent collectors based on solid, liquid and Langmuir-Blodgett films - L. Danos, P. Kittidachachan, T.J.J. Meyer, R. Greef and T. Markvart
Type: Conference or Workshop Item
| 2006
| Item not available on this server.
Elasto-plastic characterisation of CVD diamond based on nano-hardness data and finite element simulations - Luca De Fazio
Type: Thesis
| 2006
| Item availability restricted.
F
The development of superplastic ductilities and microstructural homogeneity in a Magnesium ZK60 alloy processed by ECAP - Roberto B Figueiredo and Terence G. Langdon
Type: Article
| 2006
| Item not available on this server.
Finite element modelling of plastic instability during ECAP processing of flow-softening materials - Roberto B. Figueiredo, Maria Teresa P. Aguilar and Paulo R. Cetlin
Type: Article
| 2006
| Item not available on this server.
Influence of crystal orientation on ECAP of aluminum single crystals - Yukihide Fukuda, Keiichiro Oh-ishi, Minoru Furukawa, Zenji Horita and Terence G. Langdon
Type: Article
| 2006
| Item not available on this server.
Microstructural evolution of a Mg-8mass% Li alloy processed by ECAP during superplastic deformation - M. Furui, S. Kitada, H. Anada and T.G. Langdon
Type: Article
| 2006
| Item not available on this server.
Influence of extrusion conditions on the superplastic properties of a Mg-8%Li alloy processed at room temperature by equal-channel angular pressing - M. Furui, H. Kitamura, H. Anada and T.G. Langdon
Type: Conference or Workshop Item
| 2006
| Wiley-VCH Verlag
| Item not available on this server.
An investigation of deformation in copper single crystals using equal-channel angular pressing - Minoru Furukawa, Yukhide Fukuda, Keiichiro Oh-ishi, Zenji Horita and Terence G. Langdon
Type: Conference or Workshop Item
| 2006
| Trans Tech Publications Ltd
| Item not available on this server.
G
Microstructure and texture development in aluminium 7034 and 2024 alloys processed by ECAP - N. Gao, M.J. Starink, S.C. Wang, C. Xu and T.G. Langdon
Type: Conference or Workshop Item
| 2006
| Minerals, Metals and Materials Society
| Item not available on this server.
Influence of specimen preparation by machining on the failure of polymer matrix off-axis tensile coupons - P. Ghidossi, M. Mansori and F. Pierron
Type: Article
| 2006
| Item not available on this server.
Microstructure and strength of metals processed by severe plastic deformation - J. Gibicza, N.Q. Chinh, T.G. Langdon and T. Ungár
Type: Conference or Workshop Item
| 2006
| Minerals, Metals and Materials Society
| Item not available on this server.
Stiffness and damping identification from full field measurements on vibrating plates - A. Giraudeau, B. Guo and F. Pierron
Type: Article
| 2006
| Item not available on this server.
Modeling inelastic matrix crack tip deformation in a double cantilever beam specimen - Jeremy R. Gregory and S. Mark Spearing
Type: Article
| 2006
| Item not available on this server.
The virtual fields method for extracting constitutive parameters from full-field measurements: a review - M. Grédiac, F. Pierron, S. Avril and E. Toussaint
Type: Article
| 2006
| Item not available on this server.
Applying the virtual fields method to the identification of elasto-plastic constitutive parameters - Michel Grédiac and Fabrice Pierron
Type: Article
| 2006
| Item not available on this server.
H
Direct detection of bacterial biofilms on the middle-ear mucosa of children with chronic otitis media - Luanne Hall-Stoodley, Fen Ze Hu, Armin Gieseke, Laura Nistico, Duc Nguyen, Jay Hayes, Michael Forbes, David P. Greenberg, Bethany Dice, Amy Burrows, P. Ashley Wackym, Paul Stoodley, J. Christopher Post, Garth D. Ehrlich and Joseph E. Kerschner
Type: Article
| 2006
| Item not available on this server.
Precipitation behavior in age-hardenable alloys after severe plastic deformation - Z. Horita, T. Fujita, K. Kaneko and T.G. Langdon
Type: Book Section
| 2006
| Springer
| Item not available on this server.
Type: Conference or Workshop Item
| 2006
| Minerals, Metals and Materials Society
| Item not available on this server.
An overview: fatigue behaviour of ultrafine-grained metals and alloys (in issue on fatigue lifetime prediction of metals based on microstructural behaviour) - H.W. Höppel, M. Kautz, C. Xu, M. Murashkin, T.G. Langdon, R.Z. Valiev and H. Mughrabi
Type: Article
| 2006
| Item not available on this server.
I
Development of small reliable atomic oxygen sensors of polymeric filled carbon resistor compositions - Z. Iskanderova, J. Kleiman, V. Issupov, A.R. Chambers, G.T. Roberts and C.B. White
Type: Conference or Workshop Item
| 2006
| Item not available on this server.
J
Fabrication of hall device structures in 3C-SiC using microelectromechanical processing technology - Liudi Jiang, S. Anderson, E. Thong, R. Cheung, C.A. Zorman and M. Mehregany
Type: Article
| 2006
| Item not available on this server.
SiC cantilever resonators with electrothermal actuation - Liudi Jiang, R. Cheung, J. Hedley, M. Hassan, A.J. Harris, J.S. Burdess, M. Mehregany and C. Zorman
Type: Article
| 2006
| Item not available on this server.
Nanoprecision alignment for wafer bonding - Liudi Jiang, G. Pandraud, P.J. French, S.M. Spearing and M. Kraft
Type: Conference or Workshop Item
| 2006
| Item not available on this server.
K
Type: Article
| 2006
| Item not available on this server.
An investigation of cavitation in the tensile testing of a spray-cast aluminum alloy processed by ECAP - M. Kawasaki, C. Xu and T.G. Langdon
Type: Book Section
| 2006
| Trans Tech Publications Ltd
| Item not available on this server.
The significance of cavitation in a superplastic aluminium alloy processed by ECAP - M. Kawasaki, C. Xu and T.G. Langdon
Type: Conference or Workshop Item
| 2006
| Minerals, Metals and Materials Society
| Item not available on this server.
Flow and cavitation on a quasi-superplastice two-phase magnesium-lithium alloy - Megumi Kawasaki, Kohei Kubota, Kenji Higashi and Terence G. Langdon
Type: Article
| 2006
| Item not available on this server.
Electrochemistry of non-aged copper-nickel (UNS C70610) in fully developed fluid flows. Part 1: Cathodic and anodic characteristics - G. Kear, B.D. Barker, K.R. Stokes and F.C. Walsh
Type: Article
| 2006
| Item not available on this server.
Electrochemistry of non-aged copper-nickel (UNS C70610) in fully developed fluid flows. Part 2: Cyclic voltammetry and the corrosion mechanism - G. Kear, B.D. Barker, K.R. Stokes and F.C. Walsh
Type: Article
| 2006
| Item not available on this server.
A multi-mechanistic model for precipitation strengthening in Al-Cu-Mg alloys during non-isothermal heat treatments - I.N. Khan and M.J. Starink
Type: Conference or Workshop Item
| 2006
| Trans Tech Publications Ltd
| Item not available on this server.
High resolution X-ray tomography of micromechanisms of fatigue crack closure - K.H. Khor, J.Y. Buffiere, W. Ludwig and I. Sinclair
Type: Article
| 2006
| Item not available on this server.
A detailed study of p-n junction solar cells by means of collection efficiency - P. Kittidachachan, T. Markvart, D.M. Bagnall, R. Greef and G.J. Ensell
Type: Conference or Workshop Item
| 2006
| IEEE
| Item not available on this server.
Cohesive zone modelling of wafer bonding and fracture: effect of patterning and toughness variations - D.V. Kubair and S.M. Spearing
Type: Article
| 2006
| Item not available on this server.
Effect of imposing a very high strain on the stress-strain behaviour of a Zn-22% Al Alloy - P. Kumar, C. Xu and T.G. Langdon
Type: Conference or Workshop Item
| 2006
| Minerals, Metals and Materials Society
| Item not available on this server.
Mechanical characteristics of a Zn-22% Al Alloy processed to very high strains by ECAP - Praveen Kumar, Cheng Xu and Terence G. Langdon
Type: Article
| 2006
| Item not available on this server.
L
The characteristics of grain refinement in materials processed by severe plastic deformation - Terence G. Langdon
Type: Article
| 2006
| Item not available on this server.
Grain boundary sliding revisited: developments in sliding over four decades - Terence G. Langdon
Type: Article
| 2006
| Item not available on this server.
Processing of aluminum alloys by severe plastic deformation - Terence G. Langdon
Type: Conference or Workshop Item
| 2006
| Trans Tech Publications Ltd
| Item not available on this server.
Electrodeposition of mesoporous CdTe films with the aid of citric acid from
lyotropic liquid crystalline phases - Xiaohong Li, Iris S. Nandhakumar, Tim Gabriel, George S. Attard, Matthew L. Markham, David C. Smith, Jeremy J. Baumberg, Kuveshni Govender, Paul O’Brien and David Smythe-Boyle
Type: Article
| 2006
| Item not available on this server.
Type: Book Section
| 2006
| University of Southampton,Computing Service
| Item not available on this server.
Type: Article
| 2006
| Item not available on this server.
Modelling and fabrication of low operation temperature microcages with a polymer/metal/DLC trilayer structure - J.K. Luo, R. Huang, J.H. He, Y.Q. Fu, A.J. Flewitt, S.M. Spearing, N.A. Fleck and W.I. Milne
Type: Article
| 2006
| Item not available on this server.
MEMS based digital variable capacitors with a high-k dielectric insulator - J.K. Luo, M. Lin, Y.Q. Fu, L. Wang, A.J. Flewitt, S.M. Spearing, N.A. Fleck and W.I. Milne
Type: Article
| 2006
| Item not available on this server.
Effects of process conditions on properties of electroplated Ni thin films for microsystem applications - J.K. Luo, M. Pritschow, A.J. Flewitt, S.M. Spearing, N.A. Fleck and W.I. Milne
Type: Article
| 2006
| Item not available on this server.
M
Type: Conference or Workshop Item
| 2006
| Item not available on this server.
Optical to electrical energy conversion: Solar cells - T. Markvart
Type: Book Section
| 2006
| Taylor & Francis
| Item not available on this server.
Type: Conference or Workshop Item
| 2006
| Item not available on this server.
Type: Book Section
| 2006
| Risø National Laboratory
| Item not available on this server.
Type: Conference or Workshop Item
| 2006
| Item not available on this server.
Microgrids: power systems for the 21st century? - Tom Markvart
Type: Article
| 2006
| Item not available on this server.
Type: Book Section
| 2006
| Woodhead Publishing
| Item not available on this server.
Exceptional superplasticity in an AZ61 magnesium alloy processed by extrusion and ECAP - Y. Miyahara, Z. Horita and T.G. Langdon
Type: Article
| 2006
| Item not available on this server.
Microstructural analysis of fatigue initiation in Al-Si casting alloys - A.J. Moffat, B.G. Mellor, C.L. Chen, R.C. Thomson and P.A.S. Reed
Type: Conference or Workshop Item
| 2006
| Trans Tech Publications
| Item availability restricted.
Compositional control in solid freeforming; fabrication of 3D FGM - M. M. Mohebi, S. Yang and J. R. G. Evans
Type: Conference or Workshop Item
| 2006
| Trans Tech Publications
| Item not available on this server.
Experimental analysis of toughness in 6156 Al-alloy sheet for aerospace application - T.F. Morgeneyer, M.J. Starink and I. Sinclair
Type: Article
| 2006
Identification of the through-thickness rigidities of a thick laminated composite tube - Raphaël Moulart, Stéphane Avril and Fabrice Pierron
Type: Article
| 2006
| Item not available on this server.
N
The effect of equal-channel angular pressing on structure-phase changes and superplastic properties of Al-Mg-Li alloy - E.V. Naidenkin, E.F. Dudarev, Y.R. Kolobov, G.P. Bakach and T.G. Langdon
Type: Conference or Workshop Item
| 2006
| Trans Tech Publications Ltd
| Item not available on this server.
Modelling of the concentration–time relationship based on global
diffusion-charge transfer parameters in a flow-by
reactor with a 3D electrode - J.L. Nava, E. Sosa, G. Carreno, C.A. Ponce de Leon Albarran and M.T. Oropeza
Type: Article
| 2006
| Item not available on this server.
O
The ageing characteristics of an Al-Ag alloy processed by equal-channel angular pressing - Kunihiro Ohashi, Takeshi Fujita, Kenji Kaneko, Zenji Horita and Terence G. Langdon
Type: Article
| 2006
| Item not available on this server.
Quantitative assessment of liquid Ga penetration into an aluminium alloy by high-resolution X-ray tomography - T. Ohgaki, H. Toda, I. Sinclair, J.-Y. Buffiere, W. Ludwig, T. Kobayashi, M. Niimoni and T. Akahori
Type: Article
| 2006
| Item not available on this server.
P
Identification of elasto-plastic constitutive parameters from statically undetermined tests using the virtual fields method - Y. Pannier, S. Avril, R. Rotinat and F. Pierron
Type: Article
| 2006
| Item not available on this server.
Redox flow cells for energy conversion - C. Ponce de Leon, A. Frias-Ferrer, J. Gonzalez-Garcia, D.A. Szanto and F.C. Walsh
Type: Article
| 2006
| Item not available on this server.
The oxidation of borohydride ion at titanate nanotube supported gold electrodes - C.A. Ponce de León, D.V. Bavykin and F.C. Walsh
Type: Article
| 2006
| Item not available on this server.
Type: Book Section
| 2006
| Woodhead Publishing
| Item not available on this server.
Q
A systematic approach to process selection in MEMS - D.J. Quinn, S.M. Spearing, M.F. Ashby and N.A. Fleck
Type: Article
| 2006
R
The reduction of l-cystine in hydrochloric acid at mercury drop electrodes - T.R. Ralph, M.L. Hitchman, J.P. Millington and F.C. Walsh
Type: Article
| 2006
Enhanced mass transport to a reticulated vitreous carbon rotating cylinder electrode using jet flow - G.W. Reade, C.A. Ponce de Leon Albarran and F.C. Walsh
Type: Article
| 2006
| Item not available on this server.
S
Application of high pressure torsion to bulk samples - Genki Sakai, Katsuaki Nakamura, Zenji Horita and Terence G. Langdon
Type: Book Section
| 2006
| Trans Tech Publications Ltd
| Item not available on this server.
Strain-path effects on the evolution of microstructure and texture during the severe-plastic deformation of aluminum - A.A. Salem, T.G. Langdon, T.R. McNelley, S.R. Kalidindi and S.L. Semiatin
Type: Article
| 2006
| Item not available on this server.
Damage and failure in silicon-glass-metal microfluidic joints for high-pressure MEMS devices - Dong Jin Shim, Hong-Wei Sun, S.T. Vengallatore and S.M. Spearing
Type: Article
| 2006
| Item not available on this server.
Roughness- and plasticity-induced fatigue crack closure under single overloads: analytical modelling - Konjengbam Darunkumar Singh, Kern Hauw Khor and Ian Sinclair
Type: Article
| 2006
| Item not available on this server.
Roughness-and plasticity-induced fatigue crack closure under single overloads: finite element modelling - Konjengbam Darunkumar Singh, Kern Hauw Kohr and Ian Sinclair
Type: Article
| 2006
| Item not available on this server.
Comments on “Precipitation kinetics of Al–1.12Mg2Si–0.35Si and Al–1.07Mg2Si–0.33Cu alloys” - M.J. Starink
Type: Article
| 2006
| Item not available on this server.
Precipitation hardening in Al-Cu-Mg alloys: analysis of precipitates, modelling of kinetics, strength predictions - M.J. Starink and J.L. Yan
Type: Conference or Workshop Item
| 2006
| Trans Tech Publications
| Item availability restricted.
In situ analysis of cracks in structural materials using synchrotron X-ray tomography and diffraction - A. Steuwer, L. Edwards, S. Pratihar, S. Ganguly, M. Peel, M.E. Fitzpatrick, T.J. Marrow, P.J. Withers, I. Sinclair, K.D. Singh, N. Gao, T. Buslaps and J.-Y. Buffière
Type: Article
| 2006
| Item not available on this server.
T
Type: Article
| 2006
| Item not available on this server.
The application of flow dispersion models to the FM01-lC laboratory filter-press reactor - P. Trinidad, C.A. Ponce de León and F.C. Walsh
Type: Article
| 2006
| Item not available on this server.
U
Density of stacking faults and twin boundaries in ultrafine-grained materials determined by X-Ray line profile analysis. - T. Ungár, L. Balogh, Y.T. Zhu, C. Xu, G. Ribárik, Z Horita and T.G. Langdon
Type: Conference or Workshop Item
| 2006
| Minerals, Metals and Materials Society
| Item not available on this server.
V
Producing bulk ultrafine-grained materials by severe plastic deformation - Ruslan Z. Vaiev, Yuri Estrin, Zenji Horita, Terence G. Langdon, Michael J. Zehetbauer and Yuntian T. Zhu
Type: Article
| 2006
| Item not available on this server.
Type: Article
| 2006
| Item not available on this server.
Principles of equal-channel angular pressing as a processing tool for grain refinement - Ruslan Z. Valiev and Terence G. Langdon
Type: Article
| 2006
| Item not available on this server.
Using ball-indentation to evaluate the properties of an untrafine-grained Al-2% Si Alloy processed by ECAP - K. Venkateswarlu, Gautam Das, A.K. Pramanik, Cheng Xu and Terence G. Langdon
Type: Article
| 2006
| Item not available on this server.
Fatigue crack growth and closure in fine-grained aluminium alloys - L. Venning, S.C. Hogg, I. Sinclair and P.A.S. Reed
Type: Article
| 2006
| Item not available on this server.
Type: Conference or Workshop Item
| 2006
W
VPPA welds of Al-2024 alloys: analysis and modelling of local microstructure and strength - S.C. Wang, F. Lefebvre, J.L. Yan, I. Sinclair and M.J. Starink
Type: Article
| 2006
Delamination buckling of a curved composite beam subjected to a closing bending moment - W. Wang, R. A. Shenoi and W. Cui
Type: Article
| 2006
| Item not available on this server.
Type: Conference or Workshop Item
| 2006
| Item not available on this server.
Simulation of nonwetting phase entrapment within porous media using magnetic resonance imaging - Matthew J. Watt-Smith, Sean P. Rigby, John A. Chudek and Robin S. Fletcher
Type: Article
| 2006
| Item not available on this server.
Application of diamond to enhance choke valve life in erosive duties - D.W. Wheeler, R.J.K. Wood, D. Harrison and E. Smith
Type: Article
| 2006
| Item availability restricted.
Screen printed carbon sensors for atomic oxygen measurement - C.B. White, A.R. Chambers and G.T. Roberts
Type: Conference or Workshop Item
| 2006
| Item not available on this server.
Wear monitoring of lubricated sliding contacts by acoustic emission and electrostatic technologies - R.J.K. Wood, L. Wang and J. Sun
Type: Conference or Workshop Item
| 2006
| Item not available on this server.
Erosion-corrosion intercations and their effect on marine and offshore materials. (Special issue on tribocorrosion) - Robert J.K. Wood
Type: Article
| 2006
| Item availability restricted.
Understanding surface wear in engineering materials - Robert J.K. Wood
Type: Book Section
| 2006
| Woodhead Publishing
| Item not available on this server.
X
The deformation characteristics of pure aluminum processed by equal-channel angular pressing - C. Xu, M. Furukawa, Z. Horita and T.G. Langdon
Type: Conference or Workshop Item
| 2006
| Springer
| Item not available on this server.
Developing a model for grain refinement in equal-channel angular pressing - C. Xu, M. Furukawa, Z. Horita and T.G. Langdon
Type: Conference or Workshop Item
| 2006
| Trans Tech Publications Ltd
| Item not available on this server.
Type: Conference or Workshop Item
| 2006
| Minerals, Metals and Materials Society
| Item not available on this server.
Creep and mechanical properties of a commercial aluminum alloy processed by ECAP - Cheng Xu and Terence G. Langdon
Type: Conference or Workshop Item
| 2006
| Trans Tech Publications Ltd
| Item not available on this server.
Y
Type: Conference or Workshop Item
| 2006
| University of Xiamen, China
| Item not available on this server.
Strength modelling of Al-Cu-Mg Type alloys - Jialin Yan
Type: Thesis
| 2006
Fine ceramic lattices prepared by extrusion freeforming - Hongyi Yang, Shoufeng Yang, Xiaopeng Chi and Julian R. G. Evans
Type: Article
| 2006
| Item not available on this server.
Z
In situ diagnostic of two-phase flow phenomena in polymer electrolyte fuel cells by neutron imaging: Part B. Material variations - Jianbo Zhang, Denis Kramer, Ryoichi Shimoi, Yoshitaka Ono, Eberhard Lehmann, Alexander Wokaun, Kazuhiko Shinohara and Günther G. Schere
Type: Article
| 2006
| Item not available on this server.
Preparation of ceramic well plates for combinatorial methods using the morphogenic effects of droplet drying - Yong Zhang, Lifeng Chen, Shoufeng Yang and Julian R. G. Evans
Type: Article
| 2006
| Item not available on this server.
Simultaneously elevating the strength and ductility of ultra-fine-grained pure copper - Y-H. Zhao, J.F. Bingert, X-Z. Liao, B-Z. Cui, K. Han, A.V. Sergueeva, A.K Mukherjee, R.Z. Valiev, T.G. Langdon and Y.T Zhu
Type: Article
| 2006
| Item not available on this server.
Tailoring stacking fault energy for high ductility and high strength in ultra-fine grained Cu and Its alloy - Y.H. Zhao, Y.T. Zhu, X.Z. Liao, Z. Horita and T.G. Langdon
Type: Article
| 2006
| Item not available on this server.
Microstructure evolution in commercial purity aluminium during high-pressure torsion - A.P. Zhilyaev, K. Oh-ishi, T.G. Langdon and T.R. McNelley
Type: Conference or Workshop Item
| 2006
| Minerals, Metals and Materials Society
| Item not available on this server.
Ageing and strengthening of cold-rolled Al-Mg(-Cu)-Si-Mn alloys:
experimental analysis and modelling - Zhihua Zhu
Type: Thesis
| 2006