Items where Division is "Current Faculties > Faculty of Engineering and Physical Sciences > School of Engineering > Mechanical Engineering > Engineering Materials and Surface Engineering Group
Mechanical Engineering > Engineering Materials and Surface Engineering Group" and Year is 2022

Group by: No Grouping | Authors/Creators | Item Type

Jump to: Article | Conference or Workshop Item | Dataset | Review | Special issue

Number of items: 97.

Article

Achieving superplastic elongations in an AZ80 magnesium alloy processed by high-pressure torsion - Saad A. Alsubaie, Piotr Bazarnik, Yi Huang, Malgorzata Lewandowska and Terence G. Langdon

Type: Article | 2022

Correlative neutron and X-ray tomography imaging of pile installation in chalk - Fernando Alvarez Borges, Genoveva Burca, Robert C. Atwood, Andrew James, Mark Wolstenholme and Sharif Ahmed

Type: Article | 2022

On acquisition parameters and processing techniques for interparticle contact detection in granular packings using synchrotron computed tomography - Fernando Alvarez-Borges, Sharif Ahmed and Robert C. Atwood

Type: Article | 2022

Investigation of pile penetration in calcareous soft rock using X-ray computed tomography - Fernando Alvarez-Borges, Sharif Ahmed, Bangalore Narasimha Madhusudhan and David Richards

Type: Article | 2022

Microstructural and hardness evolution of additively manufactured Al–Si–Cu alloy processed by high-pressure torsion - Ahmed S.J. Al–Zubaydi, Nong Gao, Shuncai Wang and Philippa Reed

Type: Article | 2022

Recent advances in 3D-printed polylactide and polycaprolactone-based biomaterials for tissue engineering applications - Zia Ullah Arif, Muhammad Yasir Khalid, Reza Noroozi, Ali Sadeghianmaryan, Meisam Jalalvand and Mokarram Hossain

Type: Article | 2022

Texture evolution in high-pressure torsion processing - Hiba Azzeddine, Djamel Bradai, Thierry Baudin and Terence G Langdon

Type: Article | 2022

Gaining mechanistic insight into key factors contributing to crack path transition in particle toughened carbon fibre reinforced polymer composites using 3D X-ray computed tomography - Keiran Ball, Yeajin Lee, Carolina Furtado, Albertino Arteiro, Palak Patel, Marta Majkut, Lukas Helfen, Brian L. Wardle, Mark Mavrogordato, Ian Sinclair and Mark Spearing

Type: Article | 2022

Gas bubble dynamics during methane hydrate formation and its influence on geophysical properties of sediment using high-resolution synchrotron imaging and rock physics modeling - Madhusudhan Bangalore Narasimha Murthy, Sourav K. Sahoo, Fernando Alvarez Borges, Sharif Ahmed, Laurence J. North and Angus I. Best

Type: Article | 2022

Li nucleation on the graphite anode under potential control in Li-ion batteries - Arihant Bhandari, Chao Peng, Jacek Dziedzic, John R. Owen, Denis Kramer and Chris Kriton Skylaris

Type: Article | 2022

Detailed experimental validation and benchmarking of six models for longitudinal tensile failure of unidirectional composites - Christian Breite, Arsen Melnikov, Albert Turon, Erich Schoberl, Mark Mavrogordato, Ian Sinclair, Stepan V. Lomov, A de Morais, C. Le Bourlot, E. Maire, F Otero, Neil McCartney, Mark Spearing, Soraia Pimenta, Pedro P. Camanho, Larissa Gorbatikh, Wim van Paepagem and Yentl Swolfs

Type: Article | 2022

Modelling of stress transfer in root-reinforced soils informed by four-dimensional X-ray computed tomography and digital volume correlation data - Daniel Bull, Joel Smethurst, Gerrit Meijer, Ian Sinclair, Fabrice Pierron, Tiina Roose, William Powrie and Glyn Bengough

Type: Article | 2022

Using plane strain compression test to evaluate the mechanical behavior of magnesium processed by HPT - Amanda P Carvalho, Leonardo M Reis, Ravel P.R.P. Pinheiro, Pedro Henrique R. Pereira, Terence G Langdon and Roberto B. Figueiredo

Type: Article | 2022

High-cycle fatigue induced twinning in CoCrFeNi high-entropy alloy processed by laser powder bed fusion additive manufacturing - Yinan Chen, Bo Li, Bo Chen and Fuzhen Xuan

Type: Article | 2022

Optimized identification of earlywood and latewood stiffnesses in loblolly pine in simulated experiments - J.M. Considine, N.J. Bechle, Fabrice Pierron and D.E. Kretschmann

Type: Article | 2022

Achieving ultra-high strength of Al-Cu-Li alloys by the combination of high pressure torsion and age-hardening - Jiahui Dong, Nong Gao, Ying Chen, Lingfei Cao, Hui Song, Hannes Fröck, Benjamin Milkereit and Marco J. Starink

Type: Article | 2022

Effect of heat treatment on fatigue crack growth in IN718/316L multiple-materials layered structures fabricated by laser powder bed fusion - Marie-Salome, Dani Duval-Chaneac, Nong Gao, R.H.U Khan, Michael Giles, K. Georgilas, Xiao Zhao and Philippa Reed

Type: Article | 2022

Effect of creep parameters on the steady-state flow stress of pure metals processed by high-pressure torsion - Roberto B. Figueiredo, Kaveh Edalati and Terence G Langdon

Type: Article | 2022

Effect of grain size on strength and strain rate sensitivity in metals - Roberto B. Figueiredo and Terence G Langdon

Type: Article | 2022

Effect of grain size on strength and strain rate sensitivity in the CrMnFeCoNi high-entropy alloy - Roberto B. Figueiredo, Witor Wolf and Terence G. Langdon

Type: Article | 2022

Investigating the fatigue behaviour of quasi-isotropic pseudo-ductile thin-ply carbon/glass epoxy hybrid composites - Mohamad Fotouhi, Putu Suwarta, Ali Tabatabaeian, Sakineh Fotouhi, Ross Jenkin, Meisam Jalalvand and Michael R. Wisnom

Type: Article | 2022

A physics-based life prediction model of HP40Nb heat-resistant alloy in a coupled creep-carburisation environment - Chengming Fuyang, Jianming Gong, Xiaowei Wang, Chinnapat Panwisawas and Bo Chen

Type: Article | 2022

Achieving an excellent combination of strength and plasticity in a low carbon steel through dynamic plastic deformation and subsequent annealing - Chong Gao, Ying Chun Wang, Xingwang Cheng, Zhuang Li, Hongnian Cai and Terence G. Langdon

Type: Article | 2022

Ab initio study of lithium intercalation into a graphite nanoparticle - Julian Holland, Arihant Bhandari, Denis Kramer, Victor Milman, Felix Hanke and Chris Kriton Skylaris

Type: Article | 2022

Flexible photonics in low stiffness doped silica for use in fibre reinforced polymer composite materials - Christopher Holmes, M. Godfrey, Paolo Mennea, Shahrzad Zahertar and Janice Barton

Type: Article | 2022

Modeling of cavity nucleation, early‐stage growth, and sintering in polycrystal under creep–fatigue interaction - Jingdong Hu, Changjun Liu, Fuzhen Xuan and Bo Chen

Type: Article | 2022

Martensitic twinning transformation mechanism in a metastable IVB element-based body-centered cubic high-entropy alloy with high strength and high work hardening rate - Yuhe Huang, Junheng Gao, Vassili Vorontsov, Dikai Guan, Russell Goodall, David Dye, Shuize Wang, Qiang Zhu, W. Mark Rainforth and Iain Todd

Type: Article | 2022

Influence of tantalum composition on mechanical behavior and deformation mechanisms of TiZrHfTa_x high entropy alloys - Yuhe Huang, Junheng Gao, Shuize Wang, Dikai Guan, Yidong Xu, Xiaogang Hu, W. Mark Rainforth, Qiang Zhu and Iain Todd

Type: Article | 2022

Back-end-of-line SiC based memristor for resistive memory and artificial synapse - Omesh, Radhev Kapur, Dongkai Guo, Jamie Reynolds, Yisong Han, Richard Beanland, Liudi Jiang, Kees De Groot and Ruomeng Huang

Type: Article | 2022

The Reconstruction of Human Fingerprints From High-Resolution Computed Tomography Data: Feasibility Study and Associated Ethical Issues - Orestis L. Katsamenis, Charles Burson-Thomas, Philip J Basford, Brian Pickering and Martin Browne

Type: Article | 2022

A simple and effective methodology for sizing electrical energy storage (EES) systems based on energy balance - Sofiane Kichou, Tom Markvart, Petr Wolf, Santiago Silvestre and Aissa Chouder

Type: Article | 2022 | Item not available on this server.

Microstructural influences on fatigue crack initiation and early propagation in Ni-based superalloy - Donghyuk Kim, Rong Jiang, Ian Sinclair and Philippa Reed

Type: Article | 2022

Determination of strain rate dependence at intermediate strain rates using acceleration information - Ji-Min Kim, Jin-Seong Park, Do-Hyun Leem, Minki Kim, Frédéric Barlat, Fabrice Pierron and Jin-Hwan Kim

Type: Article | 2022

Structure and low-temperature micromechanical properties of as-cast and SPD-processed high-entropy Co_25−xCr₂₅Fe₂₅Ni₂₅C_x alloys - A.V. Levenets, H.V. Rusakova, L.S. Fomenko, Yi Huang, I.V. Kolodiy, R.L. Vasilenko, E.D. Tabachnikova, M.A. Tikhonovsky and T.G. Langdon

Type: Article | 2022

Evidence for a stable single component sharp texture in high purity aluminum during tube high-pressure shearing at room temperature - Zheng Li, Luo Yi Li, Ye Bin Zhu, Kui Lin, Zhi Tian Ren, Yang Yang, Ying Liu, Jing Tao Wang and Terence G. Langdon

Type: Article | 2022

An evaluation of the mechanical properties, microstructures and strengthening mechanisms of pure Mg processed by high-pressure torsion at different temperatures - Zhuoliang Li, Hua Ding, Yi Huang and Terence G. Langdon

Type: Article | 2022

Microstructure and mechanical properties of an Fe–Mn–Al–C lightweight steel after dynamic plastic deformation processing and subsequent aging - Zongyuan Li, Ying Chun Wang, Xingwang Cheng, Chong Gao, Zhuang Li and Terence G Langdon

Type: Article | 2022

Effects of rescanning parameters on densification and microstructural refinement of 316L stainless steel fabricated by laser powder bed fusion - Anqi Liang, Andrew Hamilton, Tomas Polcar and Khee Siang Pey

Type: Article | 2022

Study on the surface modification of nanostructured Ti alloys and coarse-grained Ti alloys - Hsuan-Kai Lin, Yi-Hong Cheng, Guan Yuan Li, Ying-Chi Chen, Piotr Bazarnik, Jessica Muzy, Yi Huang and Terence G. Langdon

Type: Article | 2022

Exploiting tube high-pressure shearing to prepare a microstructure in Pb-Sn alloys for unprecedented superplasticity - Kui Lin, Zheng Li, Ying Liu, En Ma, Jing Tao Wang and Terence G. Langdon

Type: Article | 2022

Effect of soil saturation and grain size on coupled hydrothermal flow in fine sands based on X-ray μCT imaging - Kui Liu, Fleur A. Loveridge, Richard Boardman and William Powrie

Type: Article | 2022

Control of fatigue failure mechanisms in multilayer coatings by varying the architectural parameters of an intermetallic interlayer - Songsong Lu, Richard Cook, Yi Zhang and Philippa Reed

Type: Article | 2022

Formation of ultrafine grains and twins in the β-phase during superplastic deformation of two-phase brasses - Anastasia Mikhaylovskaya, Olga Yakovtseva, Natalia Tabachkova and Terence G. Langdon

Type: Article | 2022

Effects of heat treatment on the corrosion behavior and mechanical properties of biodegradable Mg alloys - Meysam Mohammadi Zerankeshi, Reza Alizadeh, Ehsan Gerashi, Mohammad Asadollahi and Terence G. Langdon

Type: Article | 2022

Evaluation of texture weakening and microstructural evolution in an Fe-10Ni7Mn martensitic steel severely deformed by six turns of high-pressure torsion - S.H. Mousavi Anijdan, H.R. Koohdar, Mahmoud Nili-Ahmadabadi, Hamid Reza Jafarian and Terence G. Langdon

Type: Article | 2022

Insights into tribofilm formation on Ti-6V-4Al in a bioactive environment: Correlation between surface modification and micro-mechanical properties - J. Qi, D. Guan, J. Nutter, B. Wang and W. M. Rainforth

Type: Article | 2022

Examining the effect of the aging state on strength and plasticity of wrought aluminum alloys - Z Qu, Z.J. Zhang, J X Yan, B S Gong, S L Lu, P. Zhang, Z.F. Zhang and Terence G Langdon

Type: Article | 2022

Formation of nanocrystalline grain structure in an Mg-Gd-Y-Zr alloy processed by high-pressure torsion - Xinyu Ren, Xinglong An, Song Ni, Yi Huang and Min Song

Type: Article | 2022

Heterostructured stainless steel: properties, current trends, and future perspectives - L. Romero-Resendiz, M. El-Tahawy, T. Zhang, M.C. Rossi, D.M. Marulanda-Cardona, T. Yang, V. Amigó-Borrás, Y. Huang, H. Mirzadeh, I.J. Beyerlein, J.C. Huang, T.G. Langdon and Y.T. Zhu

Type: Article | 2022

Effects of fast X-Ray cone-beam tomographic measurement on dimensional metrology - Harry Rossides, Hossein Towsyfyan, Ander Biguri, Hans P Deyhle, Reuben J Lindroos, Mark Mavrogordato, Richard Boardman, Wenjuan Sun and Thomas Blumensath

Type: Article | 2022

Microstructure evolution and mechanical response of a boron-modified Ti-6Al-4V alloy during high-pressure torsion processing - Shibayan Roy, Amit Sharma, Atanu Chaudhuri, Yi Huang, Terence G. Langdon and Satyam Suwas

Type: Article | 2022

Advancing bone tissue engineering one layer at a time: a layer-by-layer assembly approach to 3D bone scaffold materials - MohammadAli Sahebalzamani, Monika Ziminska, Helen O. McCarthy, Tanya J. Levingstone, Nicholas J. Dunne and Andrew Hamilton

Type: Article | 2022

Additive manufacturing-based repair of IN718 superalloy and high-cycle fatigue assessment of the joint - Riddhi Sarkar, Bo Chen, Michael E. Fitzpatrick, Daniel Fabijanic and Tim Hilditch

Type: Article | 2022 | Item availability restricted.

Strength and fatigue life at 625 K of the ultrafine-grained Ti-6Al-4V alloy produced by equal-channel angular pressing - Irina P. Semenova, Alexander V. Polyakov, Mihail V. Pesin, Andrey G. Stotskiy, Yulia M Modina, Ruslan Z. Valiev and Terence G. Langdon

Type: Article | 2022

Grain size tailoring to control strain hardening and improve the mechanical properties of a CoCrFeNiMn high-entropy alloy - Hamed Shahmir, Mohammad Sajad Mehranpour, Seyed Amir Arsalan Shams, Chong Soo Lee and Terence G. Langdon

Type: Article | 2022

X-ray directional dark-field imaging using Unified Modulated Pattern Analysis - Ronan Smith, Fabio De Marco, Ludovic Broche, Marie-christine A Zdora, Nicholas W. Phillips, Richard Boardman and Pierre Thibault

Type: Article | 2022

Exceptional thermal stability and enhanced hardness in a nanostructured Mg-Gd-Y-Zn-Zr alloy processed by high pressure torsion - Wanting Sun, Yang He, Xiaoguang Qiao, Xiaojun Zhao, Houwen Chen, Nong Gao, Marco Starink and Mingyi Zheng

Type: Article | 2022

Review of high energy x-ray computed tomography for non-destructive dimensional metrology of large metallic advanced manufactured components - Wenjuan Sun, Daniel R. Symes, Ceri M. Brenner, Michael Böhnel, Stephen Brown, Mark N. Mavrogordato, Ian Sinclair and Michael Salamon

Type: Article | 2022 | Item not available on this server.

Cyclic plasticity and damage mechanisms of Ti-6Al-4V processed by electron beam melting - A.K. Syed, D. Parfitt, D. Wimpenny, E. Muzangaza and B. Chen

Type: Article | 2022

Oxidation induced crack closure in a nickel base superalloy: a novel phenomenon and mechanism assessed via combination of 2D and 3D characterization - Yuanguo Tan, Nong Gao and Philippa Reed

Type: Article | 2022

Analysis of lower limb prosthetic socket interface based on stress and motion measurements - Jinghua Tang, Liudi Jiang, Michael Mcgrath, Dan Bader, Piotr Laszczak, David Moser and Saeed Zahedi

Type: Article | 2022

Additive binding layers to suppress free edge delamination in composite laminates under tension - Miguel Ubago Torres and Meisam Jalalvand

Type: Article | 2022

Using severe plastic deformation to produce nanostructured materials with superior properties - Ruslan Z. Valiev, Boris Straumal and Terence G. Langdon

Type: Article | 2022

The evolution of coarse grains and its effects on weakened basal texture during annealing of a cold-rolled magnesium AZ31B alloy - Xin Wang and Dikai Guan

Type: Article | 2022

Advances in superplasticity from a laboratory curiosity to the development of a superplastic forming industry - Jittraporn Wongsa-Ngam and Terence G Langdon

Type: Article | 2022

Transdermal delivery of insulin across human skin in vitro with 3D printed hollow microneedles - Iakovos Xenikakis, Konstantinos Tsongas, Emmanouil K. Tzimtzimis, Orestis Katsamenis, Efterpi Demiri, Constantinos K. Zacharis, Despoina Georgiou, Eleni P. Kalogianni, Dimitrios Tzetzis and Dimitrios G. Fatouros

Type: Article | 2022

A review on distortion and residual stress in additive manufacturing - Deqiao Xie, Fei Lv, Youwen Yang, Lida Shen, Zongjun Tian, Cijun Shuai, Bo Chen and Jianfeng Zhao

Type: Article | 2022

Identification of active slip systems in polycrystals by Slip Trace - Modified Lattice Rotation Analysis (ST-MLRA) - Biaobiao Yang, Chenying Shi, Ruilin Lai, Dongfeng Shi, Dikai Guan, Gaoming Zhu, Yujie Cui, Guoqiang Xie, Yunping Li, Akihiko Chiba and Javier LLorca

Type: Article | 2022

A novel strategy to strengthen the hexagonal close-packed (HCP) alloys - Biaobiao Yang, Chenying Shi, Xianjue Ye, Jianwei Teng, Ruilin Lai, Yujie Cui, Dongfeng Shi, Dikai Guan, Guoqiang Xie, Yunping Li and Akihiko Chiba

Type: Article | 2022 | Item not available on this server.

A La and Nb co-doped BaTiO3 film with positive-temperature-coefficient of resistance for thermal protection of batteries - Min Zhang, Sacha Fop, Denis Kramer, Nuria Garcia-Araez and Andrew L. Hector

Type: Article | 2022

A general physics-based hardening law for single phase metals - Zhenjun Zhang, Zhan Qu, Ling Xu, Rui Liu, Peng Zhang, Zhefeng Zhang and Terence G Langdon

Type: Article | 2022

Relationship between strength and uniform elongation of metals based on an exponential hardening law - Zhenjun Zhang, Zhan Qu, Ling Xu, Rui Liu, Peng Zhang, Zhefeng Zhang and Terence G. Langdon

Type: Article | 2022

Characterisation of strain localisation under cyclic loading at 450 °C by SEM-DIC in a PM Ni-based superalloy - Y. Zhao, Rong Jiang, A. Harte, Daniel John Bull and Philippa Reed

Type: Article | 2022

Crack initiation and propagation behaviour under high-temperature very-high-cycle fatigue: Directionally solidified columnar-grained vs. single-crystal superalloys - Z. Zhao, Z. Liang, Q. Li, F. Zhang and B. Chen

Type: Article | 2022

Conference or Workshop Item

Cavity expansion analysis of pile installation in chalk using synchrotron X-ray computed tomography - Fernando Alvarez-Borges, Robert Atwood, Thomas Connolley, Nghia Vo, Sharif Ahmed, B.N. Madhusudhan and David J. Richards

Type: Conference or Workshop Item | 2022 | Australian Geomechanics Society

Anti-inflammatory and antimicrobial efficacy of electrospun nanofiber films for intracanal drug delivery - Konstantina Chachlioutaki, Christina Karavasili, Elisavet Elisavet Adamoudi, Orestis L. Katsamenis, Athina Bakopoulou and Dimitrios G. Fatouros

Type: Conference or Workshop Item | 2022 | Item availability restricted.

Biomechanical interaction at a transtibial residuum/socket interface during ambulation - Kirstie Devin, Jinghua Tang, David Moser and Liudi Jiang

Type: Conference or Workshop Item | 2022 | Item not available on this server.

Evaluating dynamic biomechanics at a transtibial socket interface during gait phases using finite element analysis - Kirstie Devin, Jinghua Tang, David Moser and Liudi Jiang

Type: Conference or Workshop Item | 2022

Experimental evaluation and finite element analysis of biomechanics at a transfemoral socket interface - Kirstie Devin, Jinghua Tang, David Moser and Liudi Jiang

Type: Conference or Workshop Item | 2022 | Item not available on this server.

Evaluation of digital volume correlation (DVC) applicability in silicon dioxide (SiO2) particle-doped carbon fibre reinforced polymers using in situ synchrotron radiation computed tomography (SRCT) - Yeajin Lee, Erich Schoberl, K. Ball, Carolina Furtado, Palak Patel, Albertino Arteiro, Marta Majkut, Lukas Halfen, Brian Wardle, Takano Tsuneo, Fukuhara Yasuhiro, Sugiura Naoki, Meisam Jalalvand, Mark Mavrogordato, Mark Spearing and Ian Sinclair

Type: Conference or Workshop Item | 2022

A comparative study of myosignals taken from constrained and non-constrained hand and wrist movements - H.O. Shaw, Kirstie Devin, J. Tang and L. Jiang

Type: Conference or Workshop Item | 2022 | Item availability restricted.

Hydrogen recovery from porous media decreases with brine injection pressure and increases with brine flow rate - Eike M. Thaysen, Ian B. Butler, Damien Freitas, Aliakbar Hassanpouryouzband, Fernando Alvarez Borges, Robert C. Atwood, Bob Humphreys and Katriona Edlmann

Type: Conference or Workshop Item | 2022

3D printed hollow microneedles for transdermal insulin delivery - Iakovos Xenikakis, Konstantinos Tsongas, Orestis L. Katsamenis, Emmanouil K. Tzimtzimis, Dimitrios Tzetzis and Dimitrios G. Fatouros

Type: Conference or Workshop Item | 2022

Influence of third alloying element on dislocation slip and twinning activities in Mg-Nd-based alloys - Xun Zeng, Dietmar Letzig, Karl Ulrich Kainer, Dikai Guan and Sangbong Yi

Type: Conference or Workshop Item | 2022 | Item not available on this server.