Items where Division is "Faculties (pre 2018 reorg) > Faculty of Engineering and the Environment (pre 2018 reorg) > Mechanical Engineering (pre 2018 reorg)
Current Faculties > Faculty of Engineering and Physical Sciences > School of Engineering > Mechanical Engineering > Mechanical Engineering (pre 2018 reorg)
Mechanical Engineering > Mechanical Engineering (pre 2018 reorg)" and Year is 2013
 | Up a level |
Number of items: 61.
Article
Dry pressure drop prediction within Montz-pak
B1-250.45 packing with varied inclination angles and
geometries - Lindsay-Marie Armstrong, S. Gu and Kai H. Luo
Type: Article
| 2013
| Item availability restricted.
Optimization of micro and nanoimprint de-embossing by elastic fracture modelling - Tobias Balla and Simon Mark Spearing
Type: Article
| 2013
Supporting data management for 3D and raster data: lessons learned from the DataPool project - Gareth Beale, Steve Hitchcock, Hembo Pagi and Richard P. Boardman
Type: Article
| 2013
| Item not available on this server.
Highlights during the development of electrochemical engineering - S. Bebelis, K. Bouzek, A. Cornell, M.G.S. Ferreira, G.H. Kelsall, F. Lapicque, Carlos Ponce de Leon, M.A. Rodrigo and F.C. Walsh
Type: Article
| 2013
| Item availability restricted.
Estimating and managing blowout risk during access to subglacial Antarctic lakes - M.P. Brito, G. Griffiths, M. Mowlem and K. Makinson
Type: Article
| 2013
| Item availability restricted.
A comparison of multi-scale 3D X-ray tomographic inspection techniques for assessing carbon fibre composite impact damage - D.J. Bull, L. Helfen, I. Sinclair, S.M. Spearing and T. Baumbach
Type: Article
| 2013
Partial volume correction for approximating crack opening displacements in CFRP material obtained from micro-focus X-ray CT scans - D.J. Bull, I. Sinclair and S.M. Spearing
Type: Article
| 2013
Three-dimensional assessment of low velocity impact damage in particle toughened composite laminates using micro-focus X-ray computed tomography and synchrotron radiation laminography - D.J. Bull, S.M. Spearing, I. Sinclair and L. Helfen
Type: Article
| 2013
Development of new materials for alkaline electrolysers and investigation of the potential electrolysis impact on the electrical grid - Andrew Cruden, David Infield, Mahdi Kiaee, Tamunosaki G. Douglas and Amitava Roy
Type: Article
| 2013
| Item availability restricted.
On the optimal numerical time integration for DEM using Hertzian force models - Matthew Danby, John Shrimpton and Mark Palmer
Type: Article
| 2013
| Item not available on this server.
Enhancing the osteogenic efficacy of human bone marrow aspirate: concentrating osteoprogenitors using wave-assisted filtration - Jonathan I Dawson, James O. Smith, Alexander Aarvold, Jonathan N. Ridgway, Steven J. Curran, Douglas G. Dunlop and Richard O.C. Oreffo
Type: Article
| 2013
Effect of tube shape on the hydrodynamics and tube-to-bed heat transfer in fluidized beds - N.H. Dong, L.M. Armstrong, S. Gu and K.H. Luo
Type: Article
| 2013
| Item not available on this server.
Development of an ambient temperature alkaline electrolyser for dynamic operation with renewable energy sources - Tamunosaki Graham Douglas, Andrew Cruden and David Infield
Type: Article
| 2013
| Item availability restricted.
Developments in electrode materials and electrolytes for aluminium-air batteries - D. Egan, Carlos Ponce de Leon, R.J.K. Wood, R.L jones, K.R. Stokes and F.C. Walsh
Type: Article
| 2013
Clouds in space: scientific computing using Windows Azure - Steven Johnston, Neil O'Brien, Hugh G. Lewis, Elizabeth E. Hart, Adam E. White and Simon J. Cox
Type: Article
| 2013
A robust approach for determination of the macro-porous
volume fraction of soils with X-ray computed tomography
and an image processing protocol - Samuel Keyes, R. Boardman, Alan Marchant, Tiina Roose and I. Sinclair
Type: Article
| 2013
| Item availability restricted.
Linear stability analysis of a horizontal phase boundary separating two miscible liquids - Abdesselem Kheniene and Anatoliy Vorobev
Type: Article
| 2013
Thermodynamic and kinetic study on interfacial reaction and diamond graphitization of Cu Fe-based diamond composite - W.S. Li, J Zhang, H Dong, Ke Chu, Shuncai Wang, Y Liu and Y Li
Type: Article
| 2013
| Item not available on this server.
A novel bifunctional oxygen GDE for alkaline secondary batteries - Xiaohong Li, Derek Pletcher, Andrea E. Russell, Frank C. Walsh, Richard G.A. Wills, Scott Gorman, Stephen W.T. Price and Stephen J. Thompson
Type: Article
| 2013
Plasmonic response of Ag- and Au-infiltrated cross-linked lysozyme crystals - Otto L. Muskens, Matt W. England, Lefteris Danos, Mei Li and Stephen Mann
Type: Article
| 2013
| Item availability restricted.
Slime through time: the fossil record of prokaryote evolution - N. Noffke, A.W. Decho and P. Stoodley
Type: Article
| 2013
| Item not available on this server.
Influence of fuel variability on the characteristics of impinging non-premixed syngas burning - K.K.J. Ranga Dinesh, X Jiang, J.A. van Oijen, R.J.M. Bastiaans and L.P.H. de Goey
Type: Article
| 2013
Large eddy simulation of fuel variability and flame dynamics of hydrogen-enriched nonpremixed flames - K.K.J. Ranga Dinesh, X. Jiang, W. Malalasekera and A. Odedra
Type: Article
| 2013
Hydrogen-enriched nonpremixed jet flames: effects of preferential diffusion - K.K.J. Ranga Dinesh, X. Jiang, J. van Oijen, R. Bastiaans and L. de Goey
Type: Article
| 2013
Direct numerical simulation of non-premixed syngas burning with detailed chemistry - K.K.J. Ranga Dinesh, X. Jiang and J.A van Oijen
Type: Article
| 2013
Hydrogen-enriched non-premixed jet flames: compositional structures with near-wall effects - K.K.J. Ranga Dinesh, X. Jiang and J.A. van Oijen
Type: Article
| 2013
Burning syngas in a high swirl burner: effects of fuel composition - K.K.J. Ranga Dinesh, Kai H. Luo, M.P. Kirkpatrick and W. Malalasekera
Type: Article
| 2013
New sampling technique for collection of nanoparticles
from liquids - M. Ratoi, A. Crossley and P. Dobson
Type: Article
| 2013
| Item availability restricted.
Mechanism of action of WS2 nanoadditives in high-pressure contacts - M. Ratoi, Vlad Niste, John C. Walker and J. Zekonyte
Type: Article
| 2013
Mass transfer to a nanostructured nickel electrodeposit of high surface area in a rectangular flow channel - F. J. Recio, P. Herrasti Gonzalez, L. Vazquez, C. Ponce de Leon and F. C. Walsh
Type: Article
| 2013
| Item availability restricted.
Life under flow: a novel microfluidic device for the assessment of anti-biofilm technologies - Maria Salta, Lorenzo Capretto, Dario Carugo, Julian A. Wharton and Keith R. Stokes
Type: Article
| 2013
| Item availability restricted.
Mathematical modelling of direct borohydride fuel cells - A.A. Shah, R Singh, C. Ponce de Leon, R. G. Wills and F. C. Walsh
Type: Article
| 2013
| Item availability restricted.
Dissolution dynamics of liquid/liquid binary mixtures within a micromodel - M.S.P. Stevar and A. Vorobev
Type: Article
| 2013
| Item availability restricted.
Development of a reusable atomic oxygen sensor using ZnO thick films - Juan-Carlos Valer, G.T. Roberts, A.R. Chambers and John R. Owen
Type: Article
| 2013
Hierarchical structure formation in layered superconducting systems with multi-scale inter-vortex interactions - Christopher N. Varney, Karl A.H. Sellin, Qing-Ze Wang, Hans Fangohr and Egor Babaev
Type: Article
| 2013
CFD evaluation of internal manifold effects on mass transport distribution in a laboratory filter-press flow cell - L. Vázquez, A. Alvarez-Gallegos, F.Z. Sierra, Carlos Ponce de Leon and F.C. Walsh
Type: Article
| 2013
| Item availability restricted.
Neuromuscular electrostimulation via the common peroneal nerve promotes lower limb blood flow in a below-knee cast:
a potential for thromboprophylaxis - D.J. Warrick, A. Shaikh, Stephan D. Gadola, M. Stokes, Peter Worsley, D. Bain and A. Tucker
Type: Article
| 2013
| Item not available on this server.
Critical current and stability of MgB2 twisted-pair DC cable assembly cooled by helium gas - Y. Yang, E.A. Young, W.O.S. Bailey, C. Beduz, T. Taylor and A. Ballarino
Type: Article
| 2013
| Item not available on this server.
Absorption enhancement using nanoneedle array for solar cell - Xu Zhang, Xiao-hong Sun and Liudi Jiang
Type: Article
| 2013
| Item not available on this server.
Book
Learn to program with Visual Basic and .NET Gadgeteer - Steven J. Johnston, Sue Sentance, Steve Hodges, Jan Kucera, James Scott and Scarlet Schwiderski-Grosche
Type: Book
| 2013
| Microsoft Research
Conference or Workshop Item
Structural characterization of 3C-SiC grown using methytrichlorosilane - Matteo Bosi, Giovanni Attolini, Béla Pécz, Zsolt Zolnai, László Dobos, Oscar Martínez, Liu Di Jiang and Salim Taysir
Type: Conference or Workshop Item
| 2013
| Item not available on this server.
Quasi-static indentation and compression after impact damage growth monitoring using microfocus X-ray computed tomography - D.J. Bull, S.M. Spearing and I. Sinclair
Type: Conference or Workshop Item
| 2013
Evaluating the influence of current on the wear processes of Au/Cr-Au/MWCNT switching surfaces - Chamaporn Chianrabutra, Liudi Jiang, Adam Lewis and J.W. McBride
Type: Conference or Workshop Item
| 2013
| Item availability restricted.
.NET Gadgeteer: a new platform for K-12 computer science education - Steve Hodges, James Scott, Sue Sentance, Colin Miller, Nicolas Villar, Scarlet Schwiderski-Grosche, Kerry Hammil and Steven Johnston
Type: Conference or Workshop Item
| 2013
Carbon nanotube composite surfaces for electrical contact interfaces - Adam Lewis, Chamaporn Chianrabutra, Michael Down, J.W. McBride, Liudi Jiang and S.M. Spearing
Type: Conference or Workshop Item
| 2013
The effect on switching lifetime of chromium adhesion layers in gold-coated electrical contacts under cold and hot switching conditions - Adam Lewis, M.P Down, S.M. Spearing, Liudi Jiang, Chamaporn Chianrabutra and J.W. McBride
Type: Conference or Workshop Item
| 2013
An asperity-based finite element model for electrical contact of microswitches - Hong Liu, Dimitri Leray, Patrick Pons and Stephane Colin
Type: Conference or Workshop Item
| 2013
Novel method for making homogeneous bioactive PEEK compounds using an ultrasonic co-feeding and on-line mixing system - Mohammad Vaezi, Zongqi Li, Shoufeng Yang, Jordan Chant, Marcus Jarman-Smith and Jo Wilson
Type: Conference or Workshop Item
| 2013
| Item not available on this server.
3D printing of tissue engineering scaffolds for healthcare application - Mohammad Vaezi and Shoufeng Yang
Type: Conference or Workshop Item
| 2013
| Item not available on this server.
Type: Conference or Workshop Item
| 2013
| Item not available on this server.
Dispersion behavior of torsional guided waves in a small diameter steel gas pipe - B. Zaghari, V. Humphrey and M. Moshrefi-Torbati
Type: Conference or Workshop Item
| 2013
Thesis
Type: Thesis
| 2013
Kite dynamics for ship propulsion - George M. Dadd
Type: Thesis
| 2013
Lattice Boltzmann methods for high end computing of multiphase flow - Daniel J. Lycett-Brown
Type: Thesis
| 2013
Investigation of the use of sodium borohydride for fuel cells - Irene Merino Jimenez
Type: Thesis
| 2013
Mathematical modelling and simulation of biofuel cells - Mohamad Hussein Osman
Type: Thesis
| 2013
Direct numerical simulation of hydrogen fluid dynamics - Mohammad Pezeshki
Type: Thesis
| 2013
Micromechanical characterisation of fatigue failure in acrylic bone cement - Natalie Shearwood-Porter
Type: Thesis
| 2013
Type: Thesis
| 2013
| University of Southampton
Type: Thesis
| 2013
High temperature indentation of WC/Co hardmetals - Jonee Christine Zunega
Type: Thesis
| 2013