Items where Division is "Current Faculties > Faculty of Engineering and Physical Sciences > School of Engineering > Mechanical Engineering > Engineering Materials and Surface Engineering Group
Mechanical Engineering > Engineering Materials and Surface Engineering Group" and Year is 2023
 | Up a level |
Number of items: 85.
Hydrated behavior of multilayer polyelectrolyte-nanoclay coatings on porous materials and demonstration of shape memory effect - Jonathan Acheson, Aoife McFerran, Dichu Xu, Monika Ziminska, Saurav Goel, Alexander B. Lennon, Nicholas Dunne and Andrew Hamilton
Type: Article
| 2023
| Item availability restricted.
Type: Dataset
| 2023
| University of Southampton
A polyacrylonitrile shutdown film for prevention of thermal runaway in lithium-ion cells - Jonathan Peter Charles Allen, Marcin Mierzwa, Denis Kramer, Nuria Garcia-Araez and Andrew L. Hector
Type: Article
| 2023
Comparison of methods to segment variable-contrast XCT images of methane-bearing sand using U-nets trained on single dataset sub-volumes - Fernando J. Alvarez Borges, Oliver N.F. King, Bangalore M. Madhusudhan, Thomas Connolley, Mark Basham and Sharif Ahmed
Type: Article
| 2023
Evaluation of thermal stability and its effect on the corrosion behaviour of Mg-RE alloys processed by high-pressure torsion - Hiba Azzeddine, Abdelkader Hanna, Achour Dakhouche, Thierry Baudin, François Brisset, Yi Huang and Terence G. Langdon
Type: Article
| 2023
Seventy years of Hall-Petch, ninety years of superplasticity and a generalized approach to the effect of grain size on flow stress - Roberto B. Figueiredo, Megumi Kawasaki and Terence G. Langdon
Type: Article
| 2023
| Item availability restricted.
Type: Dataset
| 2023
| University of Southampton
The image-based ultrasonic cell shaking test - Miranda Ballard, Aleksander Marek and Fabrice Pierron
Type: Article
| 2023
Type: Dataset
| 2023
| Zenodo
| Item not available on this server.
Enhanced mechanical properties and microstructural stability of ultrafine-grained biodegradable Zn-Li-Mn-Mg-Cu alloys produced by rapid solifictaion and high-pressure torsion - Wiktor Bednarczyka, Maria Watroba, Grzegorz Cieślak, Marta Ciemiorek, Kamila Hamulka, Claudia Schreiner, Renato Figi, Marianna Marciszko-Wiąckowskad, Grzegorz Cios, Jakob Schwiedrzik, Johann Michler, Nong Gao, Malgorzata Lewandowska and Terence G. Langdon
Type: Article
| 2023
An EBSD analysis of a commercial immiscible Cu43%Cr alloy after high-pressure torsion processing and annealing - I. Bibimounea, K. Abib, T. Baudin, F. Brisset, Y. Huang, D. Bradai and T.G. Langdon
Type: Article
| 2023
| Item availability restricted.
Characterization of defect microstructure in MgRE (RE=Ce, Nd) alloys after processing by high-pressure torsion using positron annihilation spectroscopy and a high resolution X-ray diffraction - I. Bibimounea, Yousf Islem Bourezg, Khadidja Abib, M.O. Liedke, A. Wagner, Z. Matej, Y.I. Huang, Terence G. Langdon and D. Bradai
Type: Article
| 2023
| Item availability restricted.
Investigating high-speed liquid impingement with full-field measurements - C.B. Burson-Thomas, T.J. Harvey, L. Fletcher, R. Wellman, F. Pierron and R.J.K. Wood
Type: Article
| 2023
Type: Dataset
| 2023
| University of Southampton
Type: Dataset
| 2023
| University of Southampton
Influence of processing temperature on microhardness evolution, microstructure and superplastic behaviour in an Al-Mg alloy processed by high-pressure torsion - Denise C. Machado, Paula Cibely Alves Flausino, Yi Huang, Paulo Roberto Cetlin, Terence G. Langdon and Pedro Henrique R. Pereira
Type: Article
| 2023
Optimization of spatial and temporal configuration of a pressure sensing array to predict posture and mobility in lying - Silvia Caggiari, Liudi Jiang, Davide Filingeri and Peter Worsley
Type: Article
| 2023
Quantitative full‑field data fusion for evaluation of complex structures - Jack S. Callaghan, Duncan Crump, Ole Thomsen, Janice Barton and Anette Nielsen
Type: Article
| 2023
Type: Dataset
| 2023
| Natural Environment Research Council
| Item not available on this server.
Fracture mechanism of electrically-assisted micro-tension in nanostructured titanium using synchrotron radiation X-ray tomography - Wanji Chen, Jie Xu, Chaogang Ding, Debin Shan, Bin Guo and Terence G Langdon
Type: Article
| 2023
| Item availability restricted.
Modification of the Hall-Petch relationship for submicron-grained fcc metals - Nguyen Q. Chinh, Daniel Olasz, Anwar Q. Ahmed, Gyorgy Safran, Janos Lendvai and Terence G. Langdon
Type: Article
| 2023
Type: Dataset
| 2023
| University of Southampton
Type: Dataset
| 2023
| University of Southampton
Fatigue crack initiation and growth behavior within varying notch geometries in the low-cycle fatigue regime for FV566 turbine blade material - Benjamin M.D. Cunningham, Mitchell Leering, Yuhui Fan, Chao You, Andrew Morris, Philippa A.S. Reed, Andrew R. Hamilton and Michael E. Fitzpatrick
Type: Article
| 2023
Dynamic socket interface mechanics for a transfemoral amputee during walking - Kirstie Devin, Jinghua Tang, David Moser and Liudi Jiang
Type: Special issue
| 2023
| Item availability restricted.
Dynamic socket interface mechanics for a transfemoral amputee during walking - Kirstie Devin, Jinghua Tang, David Moser and Liudi Jiang
Type: Conference or Workshop Item
| 2023
| Item availability restricted.
Assessing socket fit effects on pressure and shear at a transtibial residuum/socket interface - Kirstie M. Devin, Jinghua Tang, David Moser and Liudi Jiang
Type: Article
| 2023
Type: Dataset
| 2023
| University of Southampton
Evaluating socket interface pressure and shear for a trans-femoral amputee with synchronised gait event detection - Kirstie Marie Devin, Jinghua Tang, David Moser and Liudi Jiang
Type: Conference or Workshop Item
| 2023
| Item availability restricted.
Influence of bimetal interface confinement on the Hall-petch slope of multiscale Cu/Nb multilayer composites - Chaogang Ding, Jie Xu, Debin Shan, Bin Guo and Terence G. Langdon
Type: Article
| 2023
The thermal instability mechanism and annealed deformation behavior of Cu/Nb nanolaminate composites - Chaogang Ding, Jie Xu, Debin Shan, Bin Guo and Terence G. Langdon
Type: Article
| 2023
| Item not available on this server.
Using direct high-pressure torsion synthesis to produce aluminium matrix nanocomposites reinforced with carbon nanotubes - Maria Emerla, Warsaw Technology, Yi Huang, Malgorzata Lewandowska and Terence G. Langdon
Type: Article
| 2023
| Item availability restricted.
3D printing of LEGO® like designs with tailored release profiles for treatment of sleep disorder - Atabak Ghanizadeh Tabriz, Md Sadeque Mithu, Milan D Antonijevic, Lilian Vilain, Youri Derrar, Clara Grau, Anaïs Morales, Orestis L. Katsamenis and Dennis Douroumis
Type: Article
| 2023
Reservoir computing using back-end-of-line SiC-based memristors - Dongkai Guo, Omesh Kapur, Peng Dai, Yisong Han, Richard Beanland, Liudi Jiang, C.H. (Kees) De Groot and Ruomeng Huang
Type: Article
| 2023
Dataset supporting the publication "Reservoir computing using back-end-of-line SiC-based memristors"
Type: Dataset
| 2023
| University of Southampton
Tailoring a high strength Al-4Cu alloy through processing of powders by up to 100 turns of high-pressure torsion - Olavo C. Haase, Paulo R. Cetlin, Roberto B. Figueiredo, Pedro Henrique R. Pereira and Terence G. Langdon
Type: Article
| 2023
| Item availability restricted.
Recent advances using equal-channel angular pressing to improve the properties of biodegradable Mg‒Zn alloys - Mohammad Hashemi, Reza Alizadeh and Terence G. Langdon
Type: Review
| 2023
Type: Article
| 2023
| Item availability restricted.
High densification level and hardness values of additively manufactured 316L stainless steel fabricated by fused filament fabrication - Nur Hidayah Musa, Nurainaa Mazlan, Shahir Mohd Yusuf, Nur Azmah Nordin, Saiful Amri Mazlan and Nong Gao
Type: Article
| 2023
Study on martensitic transformation twinning in ductile metastable body-centered-cubic high entropy alloys - Yuhe Huang, Junheng Gao, Haitao Zhao, Dikai Guan, Yu Zhang, Shuize Wang and Xinping Mao
Type: Article
| 2023
| Item not available on this server.
Type: Dataset
| 2023
| Zenodo
| Item not available on this server.
Type: Dataset
| 2023
| Zenodo
| Item not available on this server.
Developing a UHS clinical service for investigating early pregnancy loss: utilising μCT as a less invasive alternative to conventional autopsy - Orestis L. Katsamenis, Patricia Goggin, Sofia Michopoulou, Nadine Duffin, Ian Simcock, J. Ciaran Hutchinson, Owen Arthurs and Linden Stocker
Type: Conference or Workshop Item
| 2023
| Item not available on this server.
The role of grain size in the mechanical properties of metals - Megumi Kawasaki, Roberto B. Figueiredo and Terence G. Langdon
Type: Article
| 2023
| Item availability restricted.
Overview: using severe plastic deformation in the processing of superplastic materials - Terence G. Langdon
Type: Article
| 2023
| Item availability restricted.
Correlative multiscale microCT-SBF-SEM imaging of resin-embedded tissue - Davis Laundon, Orestis L. Katsamenis, James Thompson, Patricia Goggin, David S. Chatelet, Pascale Chavatte-Palmer, Neil J. Gostling and Rohan M. Lewis
Type: Book Section
| 2023
| Academic Press
| Item not available on this server.
A review of recent research on nanoindentation of high-entropy alloys processed by high-pressure torsion - Dong-Hyun Lee, In-Chul Choi, Megumi Kawasaki, Terence G. Langdon and Jae-il Jang
Type: Review
| 2023
| Item availability restricted.
Internal strain sensing in carbon fibre composites via digital volume correlation and in situ synchrotron computed tomography - Y. Lee, K. Rankin, P. Patel, P. Basford, C. Furtado, P. Campos, A. Takeuchi, M. Uesugi, B. Wardle, M. Jalalvand, M.N. Mavrogordato, S.M. Spearing and I. Sinclair
Type: Conference or Workshop Item
| 2023
| Item not available on this server.
Tube high-pressure shearing: a simple shear path to unusual microstructures and unprecedented properties - Zheng Li, Jing Tao Wang and Terence G. Langdon
Type: Article
| 2023
| Item availability restricted.
Type: Dataset
| 2023
| University of Southampton
Type: Dataset
| 2023
| University of Southampton
Interfacial characteristics of austenitic 316L and martensitic 15-5PH stainless steels joined by laser powder bed fusion - Anqi Liang, Sandeep Sahu, Xiao Zhao, Tomas Polcar and Andrew Hamilton
Type: Article
| 2023
| Item availability restricted.
Investigation of microstructure and texture evolution in an AZ31/Mg-Gd alloy hybrid metal fabricated by high-pressure torsion - Ouarda Ould Mohamed, Hiba Azzeddine, Yi Huang, Thierry Baudin, Piotr Bazarnik, Francois Brisset, Megumi Kawasaki and Terence G. Langdon
Type: Article
| 2023
A comparative study between AZ31 and Mg-Gd alloys after high-pressure torsion - Ouarda Ould Mohamed, Piotr Bazarnik, Yi Huang, Hiba Azzeddine, Thierry Baudin, François Brisset and Terence G. Langdon
Type: Article
| 2023
| Item availability restricted.
Statistical analyses of the relationship between inclination angle and twin growth in uniaxial compression of Mg alloys - Chaitanya Paramatmuni, Anand K. Kanjarla, Xun Zeng and Dikai Guan
Type: Article
| 2023
| Item availability restricted.
Material Testing 2.0: a brief review - Fabrice Pierron
Type: Review
| 2023
Flow behaviour and microstructural stability in an Al-3Mg-0.2Sc alloy processed by high-pressure torsion at different temperatures - Pedro Henrique Rodrigues Pereira, Piotr Bazarnik, Yi Huang, Malgorzata Lewandowska and Terence G. Langdon
Type: Article
| 2023
Triple and double twin interfaces in magnesium - the role of disconnections and facets - Martina Ruffino, John Nutter, Xun Zeng, Dikai Guan, W. Mark Rainforth and Anthony T. Paxton
Type: Article
| 2023
Coupled X-ray CT and diffraction to quantify soil biomechanics by use of cone penetrometer root analogues - Siul Ruiz, James Le Houx, Daniel McKay Fletcher, Alberto Leonardi, Nancy Catherine Walker, Katherine Williams, Fernando Alvarez-Borges, Ebrahim Afsar Dizaj, Ronan Smith, Liam Perera, Sharif Ahmed and Tiina Roose
Type: Conference or Workshop Item
| 2023
| Item not available on this server.
Blown-powder direct-energy-deposition of titanium-diboride-strengthened IN718 Ni-base superalloy - Riddhi Sarkar, Bo Chen and Michael E. Fitzpatrick
Type: Article
| 2023
Superplasticity in severely deformed high-entropy alloys - Hamed Shahmir, Mohammad Sajad Mehranpour, Megumi Kawasaki and Terence G. Langdon
Type: Article
| 2023
| Item availability restricted.
Significance of adiabatic heating on phase transformation in titanium-based alloys during severe plastic deformation - Hamed Shahmir, Mahmoud Nili-Ahmadabadi, Hyoung Seop Kim and Terence G. Langdon
Type: Article
| 2023
| Item not available on this server.
Twenty years of the CoCrFeNiMn high-entropy alloy: achieving exceptional mechanical properties through microstructure engineering - Hamed Shahmir, Mohammad Sajad Mehranpour, Seyed Amir Arsalan Shams and Terence G. Langdon
Type: Article
| 2023
EMG signal analysis to assess prosthetic hand failure during activities - H.O. Shaw, K.M. Devin, J. Tang and L. Jiang
Type: Conference or Workshop Item
| 2023
| Item availability restricted.
Type: Dataset
| 2023
| University of Southampton
Microhardness and microstructural evolution of pure nickel processed by high-pressure torsion - Meng Sun, Chaogang Ding, Jie Xu, Debin Shan, Bin Guo and Terence G. Langdon
Type: Article
| 2023
Structure and cryogenic mechanical properties of severely deformed nonequiatomic alloys of Fe–Mn–Co–Cr system - E.D. Tabachnikova, T.V. Hryhorova, S.N. Smirnov, I.V. Kolodiy, Yu. O. Shapovalov, A.V. Levenets, S.E. Shumilin, I.V. Kashuba, M.A. Tikhonovsky, F. Spieckermann, M.J. Zehetbauer, E. Schafler, Y. Huang and T.G. Langdon
Type: Article
| 2023
Cryo-severe plastic deformation, microstructures and properties of metallic nanomaterials at low temperatures - Elena Tabachnikova, Tetiana Hryhorova, Sergii Shumilin, Yuriy Semerenko, Yi Huang and Terence G. Langdon
Type: Article
| 2023
| Item availability restricted.
The behavior of anisotropic fatigue short crack initiation and propagation for a directionally solidified superalloy CM247LC at room temperature - Yuanguo Tan, Sari Octaviani, Nong Gao and Philippa Reed
Type: Article
| 2023
Evaluation of in-shoe plantar pressure and shear during walking for diabetic foot ulcer prevention - Jinghua Tang, Dan L. Bader, Daniel J. Parker, Saeed Forghany, Christopher J. Nester, David Moser and Liudi Jiang
Type: Article
| 2023
Type: Dataset
| 2023
| University of Southampton
Type: Dataset
| 2023
| University of Southampton
A wearable insole system to measure plantar pressure and shear for people with diabetes - Jinghua Tang, Daniel L. Bader, David Moser, Daniel J. Parker, Saeed Forghany, Christopher J. Nester and Liudi Jiang
Type: Article
| 2023
Type: Dataset
| 2023
| University of Southampton
Pore-scale imaging of hydrogen displacement and trapping in porous media - Eike M. Thaysen, Ian B. Butler, Aliakbar Hassanpouryouzband, Damien Freitas, Fernando Alvarez-Borges, Samuel Krevor, Niklas Heinemann, Robert Atwood and Katriona Edlmann
Type: Article
| 2023
Type: Dataset
| 2023
| Zenodo
| Item not available on this server.
Characterisation of white etching structures formed in annealed AISI 52100 through High Pressure Torsion (HPT) - Luis Vicente Wilches Pena, Ling Wang, B.G. Mellor, Alexander Schwedt, J. Mayer and Walter Holweger
Type: Article
| 2023
| Item availability restricted.
Type: Dataset
| 2023
| PANGAEA
| Item not available on this server.
Microstructure evolution and tensile behaviour of fine-grained 6082 Al wire with high ultimate strength and high work hardening by friction stir extrusion of bulk Al sheet - Liang Yuan, Xun Zeng, Xingjian Zhao, Yanheng Xie, Joao Gandra and Dikai Guan
Type: Article
| 2023
Three-dimensional study of grain scale tensile twinning activity in magnesium: a combination of microstructure characterization and mechanical modeling - Xun Zeng, Chuanlai Liu, Chaoyu Zhao, Jie Dong, Franz Roters and Dikai Guan
Type: Article
| 2023
Study on a NiTiHfTa shape memory alloy with high-pressure torsion and subsequent annealing - Jintao Zhang, Shibo Wang, Yu Zhang, Yi Huang and northeastern university
Type: Conference or Workshop Item
| 2023
| Item availability restricted.
A novel approach for producing Mg-3Al-1Zn-0.2Mn alloy wire with a promising combination of strength and ductility using CoreFlowTM - Xingjian Zhao, Xun Zeng, Liang Yuan, Joao Gandra, Qamar Hayat, Mingwen Bai, W. Mark Rainforth and Dikai Guan
Type: Article
| 2023
Edge and lithium concentration effects on intercalation kinetics for graphite anodes - Keming Zhu, Denis Kramer and Chao Peng
Type: Article
| 2023
| Item availability restricted.
Review: recent advances using severe plastic deformation to improve the properties of battery materials - Mohammad Zohrevand, Nafiseh Hassanzadeh, Reza Alizadeh and Terence G. Langdon
Type: Article
| 2023
| Item availability restricted.
Evidence for two-stage hardening in an Al-Zn-Mg-Cu alloy processed by high-pressure torsion - Igor C. dos Santos, Eric M. Mazzer, Roberto B. Figueiredo, Terence G. Langdon and Pedro Henrique R. Pereira
Type: Article
| 2023
| Item availability restricted.