Items where Division is "Current Faculties > Faculty of Engineering and Physical Sciences > School of Engineering > Mechanical Engineering > Engineering Materials and Surface Engineering Group
Mechanical Engineering > Engineering Materials and Surface Engineering Group" and Year is 2020

Group by: No Grouping | Authors/Creators | Item Type

Number of items: 123.

Article

Effect of dynamic plastic deformation on the microstructure and mechanical properties of an Al–Zn–Mg alloy - Mohamed A. Afifi, Ying Chun Wang and Terence G. Langdon

Type: Article | 2020

Characteristics of grain refinement in oxygen-free copper processed by equal-channel angular pressing and dynamic testing - Meshal Y. Alawadhi, Shima Sabbaghianrad, Ying Chun Wang, Yi Huang and Terence G. Langdon

Type: Article | 2020

Mechanical behaviour of low–medium density destructured White Chalk - Fernando Alvarez Borges, BN Madhusudhan and David Richards

Type: Article | 2020

Elucidating the role of TiCl₄post-treatment on percolation of TiO₂electron transport layer in perovskite solar cells - Amalraj Peter Amalathas, Lucie Landová, Teodor Huminiuc, Lukáš Horák, Brianna Conrad, Tomas Polcar and Jakub Holovský

Type: Article | 2020

A stored energy analysis of grains with shear texture orientations in Cu-Ni-Si and Fe-Ni alloys processed by high-pressure torsion - Hiba Azzeddine, Thierry Baudin, Laura Anne Rafferty, Francois Brisset, Yi Huang, Megumi Kawasaki, Djamel Bradai and Terence G Langdon

Type: Article | 2020

An investigation of the stored energy and thermal stability in a Cu-Ni-Si alloy processed by high-pressure torsion - Hiba Azzeddine, Yousf Islem Bourezg, Adbel Yazid Khereddine, Thierry Baudin, Anne-Laure Helbert, François Brisset, Megumi Kawasaki, Djamel Bradai and Terence G Langdon

Type: Article | 2020

Superior strength of tri-layered Al-Cu-Al nano-composites processed by high-pressure torsion - Piotr Bazarnik, Aleksandra Bartkowska, Terence G Langdon, B. Romelczyk-Baishya, Boguslawa Adamczyk-Cieslak, Jiaoyan Dai, Y. Huang and Malgorzata Lewandowska

Type: Article | 2020

Microstructure and mechanical properties of a Zn-0.5Cu alloy processed by high-pressure torsion - Wiktor Bednarczyk, Jakub Kawalko, Maria Watroba, Nong Gao, Marco Starink, Piotr Bala and Terence G. Langdon

Type: Article | 2020

Electronic structure calculations in electrolyte solutions: Methods for neutralization of extended charged interfaces - Arihant Bhandari, Lucian Anton, Jacek Dziedzic, Chao Peng, Denis Kramer and Chris Kriton Skylaris

Type: Article | 2020

Arbitrarily large tomography with iterative algorithms on multiple GPUs using the TIGRE toolbox - Ander Biguri, Reuben J. Lindroos, Robert Bryll, Hossein Towsyfyan, Hans Deyhle, Ibrahim Harrane, Richard Boardman, Mark Mavrogordato, Manjit Dosanjh, Steven Hancock and Thomas Blumensath

Type: Article | 2020

Numerically robust tetrahedron-based tomographic forward and backward projectors on parallel architectures - Ander Biguri, Hossein Towsyfyan, Richard Boardman and Thomas Blumensath

Type: Article | 2020

An investigation by EXAFS of local atomic structure in an Mg-Nd alloy after processing by high-pressure torsion and ageing - Yousf Islem Bourezg, Hiba Azzeddine, Messaoud Harfouche, Dominique Thiaudière, Cristian Mocuta, Yi Huang, Djamel Bradai and Terence G. Langdon

Type: Article | 2020

Recrystallization in an Mg-Nd alloy processed by high-pressure torsion: a calorimetric analysis - Yousf Islem Bourezg, Hiba Azzeddine, Khadidja Abib, Yi Huang, Djamel Bradai and Terence G Langdon

Type: Article | 2020

Lead halide perovskite nanocrystals: Room temperature syntheses toward commercial viability - Alasdair Angus Macintyre Brown, Bahulayan Damodaran, Liudi Jiang, Ju Nie Tey, Suan-Hui Pu, Nripan Mathews and Subodh Mhaisalkar

Type: Article | 2020

Mechanisms of root-reinforcement in soils: an experimental methodology using four-dimensional X-ray computed tomography and digital volume correlation - Daniel Bull, Joel Smethurst, Ian Sinclair, Fabrice Pierron, Tiina Roose, William Powrie and Anthony G. Bengough

Type: Article | 2020

Inverse Hall–Petch behaviour in an AZ91 alloy and in an AZ91–Al2O3 composite consolidated by high-pressure torsion - Moara M. Castro, R.B. Figueiredo, Pedro Henrique R. Pereira, Augusta C. Isaac and Terence G. Langdon

Type: Article | 2020

Microstructural evolution and microhardness variations in pure titanium processed by high‐pressure torsion - Wanji Chen, Jie Xu, Detong Liu, Jianxing Bao, Shima Sabbaghianrad, Debin Shan, Bin Guo and Terence G Langdon

Type: Article | 2020

A mechanical approach to understanding the impact of the nematode Anguillicoloides crassus on the European eel swimbladder - Helen A.L. Currie, Nicholas Flores Martin, Gerardo Espindola Garcia, Frances M. Davis and Paul Kemp

Type: Article | 2020

A microfluidic-based investigation of bacterial attachment in ureteral stents - Antonio De Grazia, Gareth, William Edward Lutheryn, Alireza Meghdadi, Ali Mosayyebi, Erika J. Espinosa-Ortiz, Robin Gerlach and Dario Carugo

Type: Article | 2020

Spatial resolution of a laboratory based X-Ray cone-beam laminography scanning system for various trajectories - Hans Deyhle, Hossein Towsyfyan, Ander Biguri, Mark Mavrogordato, Richard Boardman and Thomas Blumensath

Type: Article | 2020

Microstructural evolution and mechanical behavior of Cu/Nb multilayer composites processed by accumulative roll bonding - Chaogang Ding, Jie Xu, Xuewen Li, Debin Shan, Bin Guo and Terence G. Langdon

Type: Article | 2020

Modeling of water wicking along fiber/matrix interface voids in unidirectional carbon/vinyl ester composites - Kalpani N U Galpayage Dona, E Du, Leif A Carlsson, Daniel McKay Fletcher and Richard P Boardman

Type: Article | 2020 | Item not available on this server.

Practical approach to large-scale electronic structure calculations in electrolyte solutions via continuum-embedded linear-scaling density functional theory - Jacek Dziedzic, Arihant Bhandari, Lucian Anton, Chao Peng, James C Womack, Marjan Famili, Denis Kramer and Chris-Kriton Skylaris

Type: Article | 2020

Observation of energy transfer at optical frequency to an ultrathin silicon waveguide - Liping Fang, Lefteris Danos, Tomas Markvart and Rui Chen

Type: Article | 2020

Analysis of the creep behavior of fine-grained AZ31 magnesium alloy - Roberto B. Figueiredo and Terence G Langdon

Type: Article | 2020

Using high-pressure torsion to achieve superplasticity in an AZ91 magnesium alloy - Roberto B. Figueiredo and Terence G. Langdon

Type: Article | 2020

Effect of numbers of turns of high‐pressure torsion on the development of exceptional ductility in pure magnesium - Roberto B. Figueiredo, Pedro Henrique R. Pereira and Terence G. Langdon

Type: Article | 2020

The Image-Based Inertial Release (IBIR) test: a new high strain rate test for stiffness strain-rate sensitivity identification - Lloyd Fletcher and Fabrice Pierron

Type: Article | 2020

Image-based inertial impact test for characterisation of strain rate dependency of Ti6Al4V titanium alloy - T. Fourest, P. Bouda, L.C. Fletcher, D. Notta-cuvier, E. Markiewicz, F. Pierron and B. Langrand

Type: Article | 2020

New interlaminar features and void distributions in advanced aerospace-grade composites revealed via automated algorithms using micro-computed tomography - Nathan K. Fritz, Reed Kopp, Abigail K. Nason, Xinchen Ni, Jeonyoon Lee, Itai Y. Stein, Estelle Kalfon-Cohen, Ian Sinclair, Mark Spearing, Pedro P. Camanho and Brian L. Wardle

Type: Article | 2020

Interleaving light veils to minimise the trade-off between mode-I interlaminar fracture toughness and in-plane properties - Santiago García-Rodríguez, Josep Costa Balanzat, Kathryn Rankin, Richard Boardman, Vicky Singery and Joan Mayugo Majo

Type: Article | 2020

Fabrication of an osmotic 3D printed solid dosage form for controlled release of active pharmaceutical ingredients - Christos I Gioumouxouzis, Emmanouil Tzimtzimis, Orestis L Katsamenis, Anthi Dourou, Catherine Markopoulou, Nikolaos Bouropoulos, Dimitrios Tzetzis and Dimitrios G Fatouros

Type: Article | 2020

Mechanical properties and structural stability of a bulk nanostructured metastable aluminum-magnesium system - Jae-Kyung Han, Klaus-Dieter Liss, Terence G Langdon, Jae-il Jang and Megumi Kawasaki

Type: Article | 2020

Real-time through-thickness and in-plane strain measurement in carbon fibre reinforced polymer composites using planar optical Bragg gratings - Christopher Holmes, Mike Godfrey, Daniel Bull and Janice Dulieu- Barton

Type: Article | 2020

Effect of tomography resolution on calculation of microstructural properties for lithium ion porous electrodes - James Le Houx, Markus Osenberg, Matthias Neumann, Joachim R. Binder, Volker Schmidt, Ingo Manke, Thomas Carraro and Denis Kramer

Type: Article | 2020 | Item not available on this server.

Enhanced interfacial adhesion and osseointegration of anodic TiO2 nanotube arrays on ultra-fine-grained titanium and underlying mechanisms - Nan Hu, Yuzheng Wu, Lingxia Xie, Shahir Yasin Bin Mohd Yusuf, Nong Gao, Marco Starink, Liping Tong, Paul K. Chu and Huaiyu Wang

Type: Article | 2020

An investigation of strain‐softening phenomenon in Al–0.1% Mg alloy during high‐pressure torsion processing - Yi Huang, Justine Millet, Nian X. Zhang, Péter Jenei, Jenő Gubicza and Terence G. Langdon

Type: Article | 2020

Electronic metal-support interactions in vacuum vs. electrolyte - Colleen Jackson, Graham T. Smith, Andrea E. Russell, Pieter Levecque and Denis Kramer

Type: Article | 2020 | Item not available on this server.

A quick and versatile one step metal–organic chemical deposition method for supported Pt and Pt-alloy catalysts - Colleen Jackson, Graham T. Smith, Nobuhle Mpofu, Jack M.S. Dawson, Thulile Khoza, Caelin September, Susan M. Taylor, David W. Inwood, Andrew Leach, Denis Kramer, Andrea E. Russell, Anthony R. Kucernak and Pieter Levecque

Type: Article | 2020

Microstructural assessment of 316L stainless steel using infrared thermography based measurement of energy dissipation arising from cyclic loading - Palaniappan Jaya Seelan, J.M. Dulieu-Barton and Fabrice Pierron

Type: Article | 2020

On the heterogeneity of local shear strain induced by high-pressure torsion - Wei Jiang, Hao Zhou, Yang Cao, Jinfeng Nie, Yusheng Li, Yonghao Zhao, Megumi Kawasaki, Terence G. Langdon and Yuntian Zhu

Type: Article | 2020

Rapid solidification microstructure and carbide precipitation behavior in electron beam melted high-speed steel - J. Jin, R. Gao, H. Peng, H. Guo, S. Gong and B. Chen

Type: Article | 2020 | Item not available on this server.

Reconstruction of surface-pressure fluctuations using deflectometry and the virtual fields method - R. Kaufmann, B. Ganapathisubramani and F. Pierron

Type: Article | 2020

Surface pressure reconstruction from phase averaged deflectometry measurements using the virtual fields method - R. Kaufmann, B. Ganapathisubramani and F. Pierron

Type: Article | 2020

Inverse identification strategies for the characterization of transformation-based anisotropic plasticity models with the non-linear VFM - Attilio Lattanzi, Frederic Barlat, Fabrice Pierron, Aleksander Marek and Marco Rossi

Type: Article | 2020

Ply thickness and fibre orientation effects in multidirectional composite laminates subjected to combined tension/compression and shear - Tobias Laux, Khong Gan, Janice Barton and Ole Thomsen

Type: Article | 2020

Validation of finite-element models using full-field experimental data: Levelling finite-element analysis data through a digital image correlation engine - P. Lava, EMC Jones, L Wittevrongel and Fabrice Pierron

Type: Article | 2020

Physics based modelling of porous lithium ion battery electrodes—A review - James, Peter Le Houx and Denis Kramer

Type: Article | 2020 | Item not available on this server.

The Importance of the heel effect in X-ray Ct imaging of soils - K. Liu, R. Boardman, M. Mavrogordato, F.A. Loveridge and W. Powrie

Type: Article | 2020

Corrosion behavior in Hank's solution of a magnesium-hydroxyapatite composite processed by high-pressure torsion - D. Lopes, Renata Braga Soares, M. Castro, R. Figueiredo, Terence G. Langdon and Vanessa F.C. Lins

Type: Article | 2020

The fabrication of high strength Zr/Nb nanocomposites using high-pressure torsion - Dan Luo, Teodor Huminiuc, Yi Huang, Tomas Polcar and Terence G Langdon

Type: Article | 2020

Microstructural and hardness evolution in a duplex stainless steel processed by high-pressure torsion - Ming Ma, Yi Huang, Wei Cheng and Terence G Langdon

Type: Article | 2020

Experimental validation of the sensitivity-based virtual ﬁelds for identiﬁcation of anisotropic plasticity models - A. Marek, F.M. Davis, J.-H. Kim and F. Pierron

Type: Article | 2020

Measurement of internal implantation strains in analogue bone using DVC - Alexander Marter, Charles Burson-Thomas, Alexander Dickinson, Kathryn Rankin, Mark Mavrogordato, Fabrice Pierron and Martin Browne

Type: Article | 2020

Voltage hysteresis during lithiation/delithiation of graphite associated with meta-stable carbon stackings - Michael Mercer, Chao Peng, Cindy Soares, Harry Hoster and Denis Kramer

Type: Article | 2020

Development of an Al 7050-10 vol.% alumina nanocomposite through cold consolidation of particles by high-pressure torsion - Fabio Milhorato, Roberto Figueiredo, Terence G Langdon and Eric M. Mazzer

Type: Article | 2020

Microstructural evolution and strengthening of selective laser melted 316L stainless steel processed by high-pressure torsion - Shahir Yasin Bin Mohd Yusuf, Ying Chen, Shoufeng Yang and Nong Gao

Type: Article | 2020

Comparison between virgin and recycled 316L SS and AlSi10Mg powders used for laser powder bed fusion additive manufacturing - Shahir Yasin Bin Mohd Yusuf, Edward Choo and Nong Gao

Type: Article | 2020 | Item not available on this server.

Effect of sample orientation on the microstructure and microhardness of additively manufactured AlSi10Mg processed by high-pressure torsion - Shahir Yasin Bin Mohd Yusuf, Mathias Hoegden and Nong Gao

Type: Article | 2020

Tribological behaviour of 316L stainless steel additively manufactured by laser powder bed fusion and processed via high-pressure torsion - Shahir Yasin Bin Mohd Yusuf, Daryl Lim, Ying Chen, Shoufeng Yang and Nong Gao

Type: Article | 2020

Fabrication and characterization of nanostructured immiscible Cu-Ta alloys processed by high-pressure torsion - Tayebeh Mousavi, Jiaoyan Dai, Piotr Bazarnik, Pedro Henrique R. Pereira, Yi Huang, Malgorzata Lewandowska and Terence G Langdon

Type: Article | 2020

The off-axis IBII test for composites - Samuel Laurence Parry, Lloyd Fletcher and Fabrice Pierron

Type: Article | 2020

Lithium intercalation edge effects and doping implications for graphite anodes - Chao Peng, Michael Mercer, Chris-Kriton Skylaris and Denis Kramer

Type: Article | 2020

Combining photocatalysis and optical fibre technology towards improved microreactor design for hydrogen generation with metallic nanoparticles - Matthew E. Potter, Daniel J. Stewart, Alice Elizabeth Oakley, Richard P. Boardman, Tom Bradley, Pier J.A. Sazio and Robert Raja

Type: Article | 2020

Developing an analogue residual limb for comparative DVC analysis of transtibial prosthetic socket designs - Kathryn Rankin, Joshua Steer, Joshua Paton, Mark Mavrogordato, Alexander Marter, Peter Worsley, Martin Browne and Alexander Dickinson

Type: Article | 2020

Hydrocarbon lubricants can control hydrogen embrittlement - Monica Ratoi, Hiroyoshi Tanaka, Brian Mellor and Joichi Sugimura

Type: Article | 2020

Poly(N-isopropylacrylamide) based thin microgel films for use in cell culture applications - Ilaria Sanzari, Elena Buratti, Ruomeng Huang, Camelia G. Tusan, Franco Dinelli, Nicholas D. Evans, Themistoklis Prodromakis and Monica Bertoldo

Type: Article | 2020 | Item not available on this server.

Fibre-direction strain measurement in a composite ply under pure bending using Digital Volume Correlation and Micro-focus Computed Tomography - E. Schoberl, M.N. Mavrogordato, I. Sinclair and S.M. Spearing

Type: Article | 2020

Fibre-direction strain measurement in a composite ply under quasi-static tensile loading using digital volume correlation and in situ synchrotron radiation computed tomography - Erich Schoberl, C. Breite, A. Melnikov, Y. Swolfs, Mark Mavrogordato, Ian Sinclair and Mark Spearing

Type: Article | 2020

A novel particle-filled Carbon-Fibre Reinforced Polymer model composite tailored for the application of Digital Volume Correlation and Computed Tomography - Erich Schoberl, C. Breite, Sebastian Rosini, Y. Swolfs, Mark Mavrogordato, Ian Sinclair and Mark Spearing

Type: Article | 2020

Enhanced creep resistance of an ultrafine‐grained Ti–6Al–4V alloy with modified surface by ion implantation and (Ti + V)N coating - Irina P. Semenova, Konstantin S. Selivanov, Roman R. Valiev, Iulia M. Modina, Marina K. Smyslova, Alexander V. Polyakov and Terence G. Langdon

Type: Article | 2020

The influence of graphene oxide filler on the electrical and thermal properties of unidirectional carbon fiber/epoxy laminates: Effect of out-of-plane alignment of the graphene oxide nanoparticles - Evangelos Senis, Igor O. Golosnoy, Thomas Andritsch, Janice Dulieu-Barton and Ole Thomsen

Type: Article | 2020

Effect of Cu on amorphization of a TiNi alloy during HPT and shape memory effect after post‐deformation annealing - Hamed Shahmir, Mahmoud Nili-ahmadabadi, Mahdi Mohammadi, Yi Huang, Mariusz Andrzejczuk, Małgorzata Lewandowska and Terence G. Langdon

Type: Article | 2020

Exploring the stability of twisted van der Waals heterostructures - Andrea Silva, Victor Emile Phillippe Claerbout, Tomas Polcar, Denis Kramer and Paolo Nicolini

Type: Article | 2020

Interface structures in Al-Nb₂O₅ nanocomposites processed by high-pressure torsion at room temperature - Clenio Silva, Luciano A Montoro, Debora A A Martins, Priscila A Machado, Pedro Henrique R. Pereira, Berenice M Golzalez, Terence G Langdon, Roberto B Figueiredo and Augusta C. Isaac Neta

Type: Article | 2020

Effect of postprocessing thermal treatments on electron‐beam powder bed–fused Ti6Al4V - Gowtham Soundarapandiyan, Raja Khan, Carol Johnston, Bo Chen and Michael Fitzpatrick

Type: Article | 2020 | Item availability restricted.

Effects of the CNT Content and Plating Solution pH After Purification on the Performance of Ni–P/CNT Composite Coating - Zhenmin Sun, Hemei Yang, Xiao Maohua, Yuwei Fu, Wu Dan and Nong Gao

Type: Article | 2020

Low cost infrared thermography for automated crack monitoring in fatigue testing - J.E. Thatcher, D.A. Crump, C. Devivier, P.B.S. Bailey and J.M. Dulieu-Barton

Type: Article | 2020

Successes and challenges in non-destructive testing of aircraft composite structures - Hossein Towsyfyan, Ander Biguri, Richard Boardman and Thomas Blumensath

Type: Article | 2020

Image-based inertial impact (IBII) tests for measuring the interlaminar shear moduli of composites - Jared Van Blitterswyk, Lloyd Fletcher and Fabrice Pierron

Type: Article | 2020

The significance of strain weakening and self-annealing in a superplastic Bi-Sn eutectic alloy processed by high-pressure torsion - Chuan Ting Wang, Yong He and Terence G Langdon

Type: Article | 2020

An evaluation of the microstructure and microhardness in an Al–Zn–Mg alloy processed by ECAP and post‐ECAP heat treatments - Ying Chun Wang, Mohamed A. Afifi, Xingwang Cheng, Shukui Li and Terence G. Langdon

Type: Article | 2020

A novel high-strength Zn-3Ag-0.5Mg alloy processed by hot extrusion, cold rolling or high-pressure torsion - Maria Watroba, Wiktor Bednarczyk, Jakub Kawalko, Sebastian Lech, Krysztof Wieczerzak, Terence G Langdon and Piotr Bala

Type: Article | 2020

Continuous‐flow production of liposomes with a millireactor under varying fluidic conditions - Fatih Yanar, Ali Mosayyebi, Claudio Nastruzzi, Dario Carugo and Xunli Zhang

Type: Article | 2020

An investigation into the effect of gradients on the manufacturing fidelity of triply periodic minimal surface structures with graded density fabricated by selective laser melting - Lei Yang, Massimiliano Ferrucci, Raya Mertens, Wim Dewulf, Chunze Yan, Yusheng Shi and Shoufeng Yang

Type: Article | 2020

Solidification microstructure and tensile deformation mechanisms of selective electron beam melted Ni3Al-based alloy at room and elevated temperatures - Y. Yao, C. Xing, H. Peng, H. Guo and B. Chen

Type: Article | 2020

Microstructural evolution and mechanical properties of ultrafine-grained Ti fabricated by cryorolling and subsequent annealing - H. Yu, Lin Wang, M. Yan, Hou Gy, X. Zhao, Charlie Kong, Alexander Pesin, Alexandr Zhilyaev and Terence G Langdon

Type: Article | 2020

X-ray phase tomography with near-field speckles for three-dimensional virtual histology - Marie-Christine Zdora, Pierre Thibault, Willy Kuo, Vincent Fernandez, Hans Deyhle, Joan Vila-Comamala, Margie Olbinado, Alexander Rack, Peter Lackie, Orestis Katsamenis, Matthew Lawson, Vartan Kurtcuoglu, Christoph Rau, Franz Pfeiffer and Irene Zanette

Type: Article | 2020 | Item not available on this server.

Initiation and early-stage growth of internal fatigue cracking under very-high-cycle fatigue regime at high temperature - Z. Zhao, F. Zhang and C. Dong

Type: Article | 2020 | Item not available on this server.

Tribological behaviour of self-lubricating Mg matrix composites reinforced with silicon carbide and tungsten disulfide - Juanjuan Zhu, Jiahui Qi, Dikai Guan, Le Ma and Rob Dwyer-Joyce

Type: Article | 2020 | Item not available on this server.

Book Section

Freeform fabrication of nanobiomaterials using 3D - Mohammad Vaezi and Shoufeng Yang

Type: Book Section | 2020 | Woodhead Publishing | Item not available on this server.

Towards understanding speciation by automated extraction and description of 3D foraminifera stacks - Wenshu Zhang, Thomas Ezard, Alex Searle-Barnes, Anieke Brombacher, Orestis Katsamenis and Mark Nixon

Type: Book Section | 2020 | IEEE | Item not available on this server.

Conference or Workshop Item

Application of X-ray μCT to investigate rock-structure interaction on piled foundations for marine aerogenerators - Fernando Alvarez Borges, David Richards, Christopher Clayton, Madhusudhan Bangalore Narasimha Murthy and Sharif Ahmed

Type: Conference or Workshop Item | 2020 | Item availability restricted.

Data management and automatic reporting for 3D X-ray histology - Philip J Basford, Orestis L. Katsamenis, Elena Konstantinopoulou, Richard Boardman, Philipp Schneider, Peter Lackie and Simon Cox

Type: Conference or Workshop Item | 2020

A sample and data management system for µCT-based X-ray histology - Philip J Basford, Elena Konstantinopoulou, Orestis L. Katsamenis, Richard Boardman, Philipp Schneider, Peter Lackie and Simon Cox

Type: Conference or Workshop Item | 2020

3D X-ray histology for detection of metastasis in whole lymph node specimens - Elaine Ming Li Ho, Orestis L. Katsamenis, Gareth Thomas, Peter Lackie and Philipp Schneider

Type: Conference or Workshop Item | 2020

Adding a new dimension to soft tissue imaging through correlative 2D thin-section & 3D X-ray histology - Elaine Ming Li Ho, Peter Lackie, Orestis L. Katsamenis and Philipp Schneider

Type: Conference or Workshop Item | 2020

Semi-automated Intensity-based Image quality assessment with Gaussian Mixture Models - Elaine Ming Li Ho, Charalambos Rossides, Sylvia Pender, Orestis L. Katsamenis, Peter Lackie and Philipp Schneider

Type: Conference or Workshop Item | 2020

Corroborating µCT and histological data to provide novel insight into the biological response to cochlear implantation at the electrode-tissue interface - Katie Hough, Lucy Anderson, Orestis L. Katsamenis, Guillaume Tourrel, David Chatelet, Carl Verschuur and Tracey Newman

Type: Conference or Workshop Item | 2020

Automated PDF reporting system for X-ray histology (XRH) scan data - Elena Konstantinopoulou, Philip J. Basford, Orestis L. Katsamenis, Richard Boardman, David Chatelet, Simon Cox, Philipp Schneider and Peter Lackie

Type: Conference or Workshop Item | 2020 | Item availability restricted.

Potential assessment of lung samples by X-ray histology (XRH) during surgery - Elena Konstantinopoulou, Orestis L. Katsamenis, Bethany Broadbent, David Chatelet, Philip J Basford, Ian Haig, William Roche, Aiman Alzetani, Philipp Schneider and Peter Lackie

Type: Conference or Workshop Item | 2020 | Item availability restricted.

Potential for intraoperative assessment of excised lung samples by X-ray histology - Elena Konstantinopoulou, Orestis L. Katsamenis, David Chatelet, Bethany Broadbent, Philip J Basford, Ian Haig, William Roche, Aiman Alzetani, Philipp Schneider and Peter Lackie

Type: Conference or Workshop Item | 2020 | Item availability restricted.