The University of Southampton
University of Southampton Institutional Repository

Items where Division is "Current Faculties > Faculty of Engineering and Physical Sciences > School of Engineering > Mechanical Engineering > Engineering Materials and Surface Engineering Group
Mechanical Engineering > Engineering Materials and Surface Engineering Group" and Year is 2023

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: No Grouping | Authors/Creators | Item Type
Jump to: A | B | C | D | E | G | H | K | L | O | P | R | S | T | V | W | Y | Z
Number of items: 85.

A

Hydrated behavior of multilayer polyelectrolyte-nanoclay coatings on porous materials and demonstration of shape memory effect - Jonathan Acheson, Aoife McFerran, Dichu Xu, Monika Ziminska, Saurav Goel, Alexander B. Lennon, Nicholas Dunne and Andrew Hamilton
Type: Article | 2023 | Item availability restricted.

Type: Dataset | 2023 | University of Southampton

A polyacrylonitrile shutdown film for prevention of thermal runaway in lithium-ion cells - Jonathan Peter Charles Allen, Marcin Mierzwa, Denis Kramer, Nuria Garcia-Araez and Andrew L. Hector
Type: Article | 2023

Comparison of methods to segment variable-contrast XCT images of methane-bearing sand using U-nets trained on single dataset sub-volumes - Fernando J. Alvarez Borges, Oliver N.F. King, Bangalore M. Madhusudhan, Thomas Connolley, Mark Basham and Sharif Ahmed
Type: Article | 2023

Evaluation of thermal stability and its effect on the corrosion behaviour of Mg-RE alloys processed by high-pressure torsion - Hiba Azzeddine, Abdelkader Hanna, Achour Dakhouche, Thierry Baudin, François Brisset, Yi Huang and Terence G. Langdon
Type: Article | 2023

B

Type: Article | 2023 | Item availability restricted.

Type: Dataset | 2023 | University of Southampton

The image-based ultrasonic cell shaking test - Miranda Ballard, Aleksander Marek and Fabrice Pierron
Type: Article | 2023

Type: Dataset | 2023 | Zenodo | Item not available on this server.

Enhanced mechanical properties and microstructural stability of ultrafine-grained biodegradable Zn-Li-Mn-Mg-Cu alloys produced by rapid solifictaion and high-pressure torsion - Wiktor Bednarczyka, Maria Watroba, Grzegorz Cieślak, Marta Ciemiorek, Kamila Hamulka, Claudia Schreiner, Renato Figi, Marianna Marciszko-Wiąckowskad, Grzegorz Cios, Jakob Schwiedrzik, Johann Michler, Nong Gao, Malgorzata Lewandowska and Terence G. Langdon
Type: Article | 2023

An EBSD analysis of a commercial immiscible Cu43%Cr alloy after high-pressure torsion processing and annealing - I. Bibimounea, K. Abib, T. Baudin, F. Brisset, Y. Huang, D. Bradai and T.G. Langdon
Type: Article | 2023 | Item availability restricted.

Characterization of defect microstructure in MgRE (RE=Ce, Nd) alloys after processing by high-pressure torsion using positron annihilation spectroscopy and a high resolution X-ray diffraction - I. Bibimounea, Yousf Islem Bourezg, Khadidja Abib, M.O. Liedke, A. Wagner, Z. Matej, Y.I. Huang, Terence G. Langdon and D. Bradai
Type: Article | 2023 | Item availability restricted.

Investigating high-speed liquid impingement with full-field measurements - C.B. Burson-Thomas, T.J. Harvey, L. Fletcher, R. Wellman, F. Pierron and R.J.K. Wood
Type: Article | 2023

Type: Dataset | 2023 | University of Southampton

Type: Dataset | 2023 | University of Southampton

C

Influence of processing temperature on microhardness evolution, microstructure and superplastic behaviour in an Al-Mg alloy processed by high-pressure torsion - Denise C. Machado, Paula Cibely Alves Flausino, Yi Huang, Paulo Roberto Cetlin, Terence G. Langdon and Pedro Henrique R. Pereira
Type: Article | 2023

Type: Article | 2023

Quantitative full‑field data fusion for evaluation of complex structures - Jack S. Callaghan, Duncan Crump, Ole Thomsen, Janice Barton and Anette Nielsen
Type: Article | 2023

Type: Dataset | 2023 | Natural Environment Research Council | Item not available on this server.

Type: Article | 2023 | Item availability restricted.

Modification of the Hall-Petch relationship for submicron-grained fcc metals - Nguyen Q. Chinh, Daniel Olasz, Anwar Q. Ahmed, Gyorgy Safran, Janos Lendvai and Terence G. Langdon
Type: Article | 2023

Type: Dataset | 2023 | University of Southampton

Type: Dataset | 2023 | University of Southampton

Fatigue crack initiation and growth behavior within varying notch geometries in the low-cycle fatigue regime for FV566 turbine blade material - Benjamin M.D. Cunningham, Mitchell Leering, Yuhui Fan, Chao You, Andrew Morris, Philippa A.S. Reed, Andrew R. Hamilton and Michael E. Fitzpatrick
Type: Article | 2023

D

Dynamic socket interface mechanics for a transfemoral amputee during walking - Kirstie Devin, Jinghua Tang, David Moser and Liudi Jiang
Type: Special issue | 2023 | Item availability restricted.

Dynamic socket interface mechanics for a transfemoral amputee during walking - Kirstie Devin, Jinghua Tang, David Moser and Liudi Jiang
Type: Conference or Workshop Item | 2023 | Item availability restricted.

Assessing socket fit effects on pressure and shear at a transtibial residuum/socket interface - Kirstie M. Devin, Jinghua Tang, David Moser and Liudi Jiang
Type: Article | 2023

Type: Dataset | 2023 | University of Southampton

Type: Conference or Workshop Item | 2023 | Item availability restricted.

Type: Article | 2023

The thermal instability mechanism and annealed deformation behavior of Cu/Nb nanolaminate composites - Chaogang Ding, Jie Xu, Debin Shan, Bin Guo and Terence G. Langdon
Type: Article | 2023 | Item not available on this server.

Evidence for two-stage hardening in an Al-Zn-Mg-Cu alloy processed by high-pressure torsion - Igor C. dos Santos, Eric M. Mazzer, Roberto B. Figueiredo, Terence G. Langdon and Pedro Henrique R. Pereira
Type: Article | 2023 | Item availability restricted.

E

Using direct high-pressure torsion synthesis to produce aluminium matrix nanocomposites reinforced with carbon nanotubes - Maria Emerla, Warsaw Technology, Yi Huang, Malgorzata Lewandowska and Terence G. Langdon
Type: Article | 2023 | Item availability restricted.

G

3D printing of LEGO® like designs with tailored release profiles for treatment of sleep disorder - Atabak Ghanizadeh Tabriz, Md Sadeque Mithu, Milan D Antonijevic, Lilian Vilain, Youri Derrar, Clara Grau, Anaïs Morales, Orestis L. Katsamenis and Dennis Douroumis
Type: Article | 2023

Reservoir computing using back-end-of-line SiC-based memristors - Dongkai Guo, Omesh Kapur, Peng Dai, Yisong Han, Richard Beanland, Liudi Jiang, C.H. (Kees) De Groot and Ruomeng Huang
Type: Article | 2023

Type: Dataset | 2023 | University of Southampton

H

Tailoring a high strength Al-4Cu alloy through processing of powders by up to 100 turns of high-pressure torsion - Olavo C. Haase, Paulo R. Cetlin, Roberto B. Figueiredo, Pedro Henrique R. Pereira and Terence G. Langdon
Type: Article | 2023 | Item availability restricted.

Type: Review | 2023

Invited viewpoint: biodegradable Mg batteries - Nafiseh Hassanzadeh and Terence G Langdon
Type: Article | 2023 | Item availability restricted.

High densification level and hardness values of additively manufactured 316L stainless steel fabricated by fused filament fabrication - Nur Hidayah Musa, Nurainaa Mazlan, Shahir Mohd Yusuf, Nur Azmah Nordin, Saiful Amri Mazlan and Nong Gao
Type: Article | 2023

Study on martensitic transformation twinning in ductile metastable body-centered-cubic high entropy alloys - Yuhe Huang, Junheng Gao, Haitao Zhao, Dikai Guan, Yu Zhang, Shuize Wang and Xinping Mao
Type: Article | 2023 | Item not available on this server.

K

Type: Dataset | 2023 | Zenodo | Item not available on this server.

Type: Dataset | 2023 | Zenodo | Item not available on this server.

Developing a UHS clinical service for investigating early pregnancy loss: utilising μCT as a less invasive alternative to conventional autopsy - Orestis L. Katsamenis, Patricia Goggin, Sofia Michopoulou, Nadine Duffin, Ian Simcock, J. Ciaran Hutchinson, Owen Arthurs and Linden Stocker
Type: Conference or Workshop Item | 2023 | Item not available on this server.

The role of grain size in the mechanical properties of metals - Megumi Kawasaki, Roberto B. Figueiredo and Terence G. Langdon
Type: Article | 2023 | Item availability restricted.

L

Type: Article | 2023 | Item availability restricted.

Correlative multiscale microCT-SBF-SEM imaging of resin-embedded tissue - Davis Laundon, Orestis L. Katsamenis, James Thompson, Patricia Goggin, David S. Chatelet, Pascale Chavatte-Palmer, Neil J. Gostling and Rohan M. Lewis
Type: Book Section | 2023 | Academic Press | Item not available on this server.

A review of recent research on nanoindentation of high-entropy alloys processed by high-pressure torsion - Dong-Hyun Lee, In-Chul Choi, Megumi Kawasaki, Terence G. Langdon and Jae-il Jang
Type: Review | 2023 | Item availability restricted.

Internal strain sensing in carbon fibre composites via digital volume correlation and in situ synchrotron computed tomography - Y. Lee, K. Rankin, P. Patel, P. Basford, C. Furtado, P. Campos, A. Takeuchi, M. Uesugi, B. Wardle, M. Jalalvand, M.N. Mavrogordato, S.M. Spearing and I. Sinclair
Type: Conference or Workshop Item | 2023 | Item not available on this server.

Type: Article | 2023 | Item availability restricted.

Type: Dataset | 2023 | University of Southampton

Type: Dataset | 2023 | University of Southampton

Type: Article | 2023 | Item availability restricted.

O

Investigation of microstructure and texture evolution in an AZ31/Mg-Gd alloy hybrid metal fabricated by high-pressure torsion - Ouarda Ould Mohamed, Hiba Azzeddine, Yi Huang, Thierry Baudin, Piotr Bazarnik, Francois Brisset, Megumi Kawasaki and Terence G. Langdon
Type: Article | 2023

A comparative study between AZ31 and Mg-Gd alloys after high-pressure torsion - Ouarda Ould Mohamed, Piotr Bazarnik, Yi Huang, Hiba Azzeddine, Thierry Baudin, François Brisset and Terence G. Langdon
Type: Article | 2023 | Item availability restricted.

P

Type: Article | 2023 | Item availability restricted.

Type: Review | 2023

R

Flow behaviour and microstructural stability in an Al-3Mg-0.2Sc alloy processed by high-pressure torsion at different temperatures - Pedro Henrique Rodrigues Pereira, Piotr Bazarnik, Yi Huang, Malgorzata Lewandowska and Terence G. Langdon
Type: Article | 2023

Triple and double twin interfaces in magnesium - the role of disconnections and facets - Martina Ruffino, John Nutter, Xun Zeng, Dikai Guan, W. Mark Rainforth and Anthony T. Paxton
Type: Article | 2023

Coupled X-ray CT and diffraction to quantify soil biomechanics by use of cone penetrometer root analogues - Siul Ruiz, James Le Houx, Daniel McKay Fletcher, Alberto Leonardi, Nancy Catherine Walker, Katherine Williams, Fernando Alvarez-Borges, Ebrahim Afsar Dizaj, Ronan Smith, Liam Perera, Sharif Ahmed and Tiina Roose
Type: Conference or Workshop Item | 2023 | Item not available on this server.

S

Type: Article | 2023

Superplasticity in severely deformed high-entropy alloys - Hamed Shahmir, Mohammad Sajad Mehranpour, Megumi Kawasaki and Terence G. Langdon
Type: Article | 2023 | Item availability restricted.

Significance of adiabatic heating on phase transformation in titanium-based alloys during severe plastic deformation - Hamed Shahmir, Mahmoud Nili-Ahmadabadi, Hyoung Seop Kim and Terence G. Langdon
Type: Article | 2023 | Item not available on this server.

Twenty years of the CoCrFeNiMn high-entropy alloy: achieving exceptional mechanical properties through microstructure engineering - Hamed Shahmir, Mohammad Sajad Mehranpour, Seyed Amir Arsalan Shams and Terence G. Langdon
Type: Article | 2023

Type: Conference or Workshop Item | 2023 | Item availability restricted.

Type: Dataset | 2023 | University of Southampton

Microhardness and microstructural evolution of pure nickel processed by high-pressure torsion - Meng Sun, Chaogang Ding, Jie Xu, Debin Shan, Bin Guo and Terence G. Langdon
Type: Article | 2023

T

Structure and cryogenic mechanical properties of severely deformed nonequiatomic alloys of Fe–Mn–Co–Cr system - E.D. Tabachnikova, T.V. Hryhorova, S.N. Smirnov, I.V. Kolodiy, Yu. O. Shapovalov, A.V. Levenets, S.E. Shumilin, I.V. Kashuba, M.A. Tikhonovsky, F. Spieckermann, M.J. Zehetbauer, E. Schafler, Y. Huang and T.G. Langdon
Type: Article | 2023

Cryo-severe plastic deformation, microstructures and properties of metallic nanomaterials at low temperatures - Elena Tabachnikova, Tetiana Hryhorova, Sergii Shumilin, Yuriy Semerenko, Yi Huang and Terence G. Langdon
Type: Article | 2023 | Item availability restricted.

Type: Article | 2023

Evaluation of in-shoe plantar pressure and shear during walking for diabetic foot ulcer prevention - Jinghua Tang, Dan L. Bader, Daniel J. Parker, Saeed Forghany, Christopher J. Nester, David Moser and Liudi Jiang
Type: Article | 2023

Type: Dataset | 2023 | University of Southampton

Type: Dataset | 2023 | University of Southampton

A wearable insole system to measure plantar pressure and shear for people with diabetes - Jinghua Tang, Daniel L. Bader, David Moser, Daniel J. Parker, Saeed Forghany, Christopher J. Nester and Liudi Jiang
Type: Article | 2023

Type: Dataset | 2023 | University of Southampton

Pore-scale imaging of hydrogen displacement and trapping in porous media - Eike M. Thaysen, Ian B. Butler, Aliakbar Hassanpouryouzband, Damien Freitas, Fernando Alvarez-Borges, Samuel Krevor, Niklas Heinemann, Robert Atwood and Katriona Edlmann
Type: Article | 2023

V

Type: Dataset | 2023 | Zenodo | Item not available on this server.

W

Characterisation of white etching structures formed in annealed AISI 52100 through High Pressure Torsion (HPT) - Luis Vicente Wilches Pena, Ling Wang, B.G. Mellor, Alexander Schwedt, J. Mayer and Walter Holweger
Type: Article | 2023 | Item availability restricted.

Type: Dataset | 2023 | PANGAEA | Item not available on this server.

Y

Type: Article | 2023

Z

Type: Article | 2023

Study on a NiTiHfTa shape memory alloy with high-pressure torsion and subsequent annealing - Jintao Zhang, Shibo Wang, Yu Zhang, Yi Huang and northeastern university
Type: Conference or Workshop Item | 2023 | Item availability restricted.

A novel approach for producing Mg-3Al-1Zn-0.2Mn alloy wire with a promising combination of strength and ductility using CoreFlowTM - Xingjian Zhao, Xun Zeng, Liang Yuan, Joao Gandra, Qamar Hayat, Mingwen Bai, W. Mark Rainforth and Dikai Guan
Type: Article | 2023

Type: Article | 2023 | Item availability restricted.

Review: recent advances using severe plastic deformation to improve the properties of battery materials - Mohammad Zohrevand, Nafiseh Hassanzadeh, Reza Alizadeh and Terence G. Langdon
Type: Article | 2023 | Item availability restricted.

This list was generated on Tue Jun 18 01:58:53 2024 BST.
Atom RSS 1.0 RSS 2.0

Contact ePrints Soton: eprints@soton.ac.uk

ePrints Soton supports OAI 2.0 with a base URL of http://eprints.soton.ac.uk/cgi/oai2

This repository has been built using EPrints software, developed at the University of Southampton, but available to everyone to use.

We use cookies to ensure that we give you the best experience on our website. If you continue without changing your settings, we will assume that you are happy to receive cookies on the University of Southampton website.

×