Items where Division is "Faculties (pre 2018 reorg) > Faculty of Engineering and the Environment (pre 2018 reorg) > Mechanical Engineering (pre 2018 reorg) > Engineering Mats & Surface Engineerg Gp (pre 2018 reorg)
Current Faculties > Faculty of Engineering and Physical Sciences > School of Engineering > Mechanical Engineering > Mechanical Engineering (pre 2018 reorg) > Engineering Mats & Surface Engineerg Gp (pre 2018 reorg)
Mechanical Engineering > Mechanical Engineering (pre 2018 reorg) > Engineering Mats & Surface Engineerg Gp (pre 2018 reorg)" and Year is 2010
 | Up a level |
Number of items: 93.
Processing of aluminium and titanium alloys by severe plastic deformation - Saleh N. Alhajeri
Type: Thesis
| 2010
The evolution of homogeneity during processing aluminium alloys by HPT - Saleh N. Alhajeri, Megumi Kawasaki, Nong Gao and Terence G. Langdon
Type: Article
| 2010
| Item not available on this server.
Evolution of microstructural homogeneity in copper processed by high-pressure torsion - X.H. An, S.D. Wu, Z..F. Zhang, R.B. Figueiredo, N Gao and T.G. Langdon
Type: Article
| 2010
| Item not available on this server.
Preparation and characterization of bioceramics produced from calcium phosphate cements - O. Andriotis, O. L. Katsamenis, D. E. Mouzakis and N. Bouropoulos
Type: Article
| 2010
| Item not available on this server.
Modelling biomimetic moth-eye structures for antireflection surfaces - Asa Asadollahbaik, Stuart Boden, Marc Molinari, Simon Cox and Darren Bagnall
Type: Article
| 2010
The contributions of grain size, dislocation density and twinning to the strength of a magnesium alloy processed by ECAP - Levente Balogh, Roberto B. Figueiredo, Tamás Ungár and Terence G. Langdon
Type: Article
| 2010
| Item not available on this server.
Application of magic-angle spinning NMR to examine the nature of protons in titanate nanotubes - Dmitry V. Bavykin, Marina Carravetta, Alexander N. Kulak and Frank C. Walsh
Type: Article
| 2010
| Item availability restricted.
Metastable nature of titanate nanotubes in an alkaline environment - Dmitry V. Bavykin, Alexander N. Kulak and Frank C. Walsh
Type: Article
| 2010
| Item availability restricted.
Titanate and Titania Nanotubes: Synthesis, Properties and Applications - Dmitry V. Bavykin and Frank C. Walsh
Type: Book
| 2010
| Royal Society of Chemistry
| Item not available on this server.
Unusual macroscopic shearing patterns observed in metals processed by high-pressure torsion - Y. Cao, M. Kawasaki, Y.B. Wang, S.N. Alhajeri, X.Z. Liao, W.L. Zheng, S.P. Ringer, Y.T. Zhu and T.G. Langdon
Type: Article
| 2010
| Item not available on this server.
A visualization of shear strain in processing by high-pressure torsion - Y. Cao, Y.B. Wang, S.N. Alhajeri, X.Z. Liao, W.L. Zheng, S.P. Ringer, T.G. Langdon and Y.T. Zhu
Type: Article
| 2010
| Item not available on this server.
Avoiding cracks and inhomogeneities in billets processed by ECAP - Paulo R. Cetlin, Maria Teresa P. Aguilar, Roberto B. Figueiredo and Terence G. Langdon
Type: Article
| 2010
| Item not available on this server.
Anomaly detection of the tapered roller bearings with statistical data-driven approaches - S.L. Chen, L. Wang, R.J.K. Wood, R. Callan and H.E.G. Powrie
Type: Article
| 2010
| Item not available on this server.
Extrusion pressure generated in high alumina content paste extrusion - X.P. Chi, S. Yang and J.R.G. Evans
Type: Conference or Workshop Item
| 2010
| IEEE Computer Society
Plastic behavior of face-centered-cubic metals over a wide range of strain - Nguyen Q. Chinh, Tamás Csanádi, Jenő Gubicza and Terence G. Langdon,
Type: Article
| 2010
| Item not available on this server.
Processing age-hardenable alloys by equal-channel angular pressing at room temperature: strategies and advantages - Nguyen Q. Chinh, Jeno Gubicza, Tomasz Czeppe, Janos Lendvai and Terence G Langdon
Type: Book Section
| 2010
| Trans Tech Publications
| Item not available on this server.
A novel flow battery: a lead acid battery based on an electrolyte with soluble lead(II) Part VIII. The cycling of a 10 cm × 10 cm flow cell - John Collins, Gareth Kear, Xiaohong Li, C.T. John Low, Derek Pletcher, Ravichandra Tangirala, Duncan Stratton-Campbell, Frank C Walsh and Caiping Zhang
Type: Article
| 2010
Type: Thesis
| 2010
Excitation energy transfer rate from langmuir blodgett (LB) dye monolayers to silicon: effect of aggregate formation - Lefteris Danos and Tomas Markvart
Type: Article
| 2010
| Item not available on this server.
Influence of high-pressure torsion on microstructural evolution in an Al–Zn–Mg–Cu alloy - Zhi C. Duan, Xiao Z. Liao, Megumi Kawasaki,, Roberto B. Figueiredo and Terence G. Langdon
Type: Article
| 2010
| Item not available on this server.
Developing processing routes for the equal-channel angular pressing of age-hardenable aluminum alloys - Zhi Chao Duan, Nguyen Chinh, Cheng Xu and Terence G. Langdon
Type: Article
| 2010
| Item not available on this server.
Comparison of time-dependent crack growth mechanisms in a range of turbine disc alloys - S. Everitt, H.T. Pang, M.J. Starink and P.A.S. Reed
Type: Conference or Workshop Item
| 2010
| Item not available on this server.
The effect of cyclic bending on the mechanical properties and dislocation structures of drawn steel bars - R.B. Figueiredo, E.C.S. Correa, W.A. Monteiro, M.T.P. Aguilar and P.R. Cetlin
Type: Article
| 2010
| Item not available on this server.
Characteristics of cavitation in a superplastic magnesium AZ31 alloy processed by equal-channel angular pressing - R.B. Figueiredo and T.G. Langdon
Type: Article
| 2010
| Item not available on this server.
Grain refinement and mechanical behaviour of a magnesium alloy processed by ECAP - Robert B. Figueiredo and Terence G. Langdon
Type: Article
| 2010
| Item not available on this server.
Using X-ray microtomography to evaluate cavity formation in a superplastic magnesium alloy processed by equal-channel angular pressing - Roberto B. Figueiredo, Sofiane Terzi and Terence G. Langdon
Type: Article
| 2010
| Item not available on this server.
Microstructures of aluminium and copper single crystals processed by equal-channel angular pressing - M. Furukawa, Z. Horita and T.G. Langdon
Type: Book Section
| 2010
| Trans Tech Publications
| Item not available on this server.
Suspension stability and fractal patterns: A comparison using hydroxyapatite - Feng Gao, Shoufeng Yang, Pengwei Hao and Julian R.G. Evans
Type: Article
| 2010
| Item not available on this server.
An alternative to modal analysis for material stiffness and damping identification from vibrating plates - Alain Giraudeau, Fabrice Pierron and Baoqiao Guo
Type: Article
| 2010
| Item not available on this server.
Principles of self-annealing in silver processed by equal-channel angular pressing: the significance of a very low stacking fault energy - J Gubicza, N.Q. Chinh, J.L. Lábár, Z. Hegedüs and T.G. Langdon
Type: Article
| 2010
| Item not available on this server.
Monitoring of self-annealing in ultrafine-grained silver using nanoindentation - Jenö Gubicza, Nguyen Q. Chinh and Terence G. Langdon
Type: Article
| 2010
| Item not available on this server.
Self-healing of internal damage in synthetic vascular materials - Andrew R. Hamilton, Nancy R. Sottos and Scott R. White
Type: Article
| 2010
| Item not available on this server.
Development of a low temperature amorphous Si/Ti for integrated MEMS/NEMS - Liudi Jiang, G. Lewis, S. M. Spearing, N. M. Jennett and M. Monclus
Type: Article
| 2010
| Item availability restricted.
Examination of the failure of sandwich beams with core junctions subjected to transverse shear loading - M. Johannes and O.T. Thomsen
Type: Article
| 2010
| Item not available on this server.
Effect of strain reversals on the processing of high-purity aluminum by high-pressure torsion - Megumi Kawasaki, B.yungmin Ahn and Terence G. Langdon
Type: Article
| 2010
| Item not available on this server.
Microstructural evolution in a two-phase alloy processed by high-pressure torsion - Megumi Kawasaki, Byungmin Ahn and Terence G. Langdon
Type: Article
| 2010
| Item not available on this server.
Significance of strain reversals in a two-phase alloy processed by high-pressure torsion - Megumi Kawasaki, Byungmin Ahn and Terence G. Langdon
Type: Article
| 2010
| Item not available on this server.
Characteristics of high temperature creep in pure aluminium processed by equal-channel angular pressing - Megumi Kawasaki and Terence G. Langdon
Type: Book Section
| 2010
| Trans Tech Publications
| Item not available on this server.
New developments in the processing of bulk nanoscale metals using high-pressure torsion - Megumi Kawasaki and Terence G. Langdon
Type: Article
| 2010
| Item not available on this server.
An evaluation of creep behaviour in ultrafine-grained aluminium alloys processed by ECAP - Megumi Kawasaki, Vaclav Sklenicka and Terence G. Langdon
Type: Article
| 2010
| Item not available on this server.
Thermodynamic modeling of micro heat engines for power generation - Khu Khu, Liudi Jiang and Tom Markvart
Type: Conference or Workshop Item
| 2010
Identification of the mechanical properties of superconducting windings using the virtual fields method - Jin-Hwan Kim, Francois Nunio, Fabrice Pierron and Pierre Vedrine
Type: Article
| 2010
| Item not available on this server.
Efficient light trapping in a fluorescence solar collector by 3D photonic crystal - Sebastian Knabe, Nazila Soleimani, Tomas Markvart and Gottfried Heinrich Bauer
Type: Article
| 2010
| Item not available on this server.
Seventy-five years of superplastic research: an overall perspective for the superplasticity conferences - T.G. Langdon
Type: Conference or Workshop Item
| 2010
| Trans Tech Publications Ltd
| Item not available on this server.
The impact of bulk nanostructured materials in modern research - Terence G. Langdon
Type: Article
| 2010
| Item not available on this server.
Narrow-beam azimuthally omni-directional millimetre-wave antenna using freeformed cylindrical woodpile cavity - Y. Lee, X. Lu, Y. Hao, S. Yang, J.R.G. Evans and C.G. Parini
Type: Article
| 2010
| Item not available on this server.
Influence of grain size on the density of deformation twins in Cu–30%Zn alloy - Y. Li, Y.H. Zhao, W. Liu, C. Xu, Z. Horita, X.Z. Liao, Y.T. Zhu, T.G. Langdon and E.J. Lavernia
Type: Article
| 2010
| Item not available on this server.
Micro- and nanomechanical analysis of articular cartilage by indentation-type atomic force microscopy: validation with a gel-microfiber composite microscopy - Marko Loparic, Dieter Wirz, A.U. Daniels, Roberto Raiteri, Mark R. VanLandingham, Geraldine Guex, Ivan Martin, Ueli Aebi and Martin Stolz
Type: Article
| 2010
| Item not available on this server.
Solvent-based paste extrusion solid freeforming - Xuesong Lu, Yoonjae Lee, Shoufeng Yang, Yang Hao, Julian R. G. Evans and Clive G. Parini
Type: Article
| 2010
| Item not available on this server.
Type: Conference or Workshop Item
| 2010
| Item not available on this server.
Development and assessment of embedded acoustic emission
technology for non-destructive assessment of cemented hip
replacement constructs - Mark N. Mavrogordato
Type: Thesis
| 2010
Assessment of laminate damage micromechanisms using high resolution synchrotron radiation computed tomography & laminography - Mark N. Mavrogordato, Peter Wright, Lukas Helfen, I. Sinclair and Simon Mark Spearing
Type: Conference or Workshop Item
| 2010
Photon transport in fluorescent solar collectors - T.J.J. Meyer
Type: Thesis
| 2010
In situ synchrotron computed laminography of damage in carbon fibre-epoxy [90/0](s) laminates - Andrew J. Moffat, Peter Wright, Lukas Helfen, T. Baumbach, Gregory Johnson, Simon M. Spearing and Ian Sinclair
Type: Article
| 2010
| Item not available on this server.
Polymer microvascular network composites - S.C. Olugebefola, A.M. Aragón, C.J. Hansen, A.R. Hamilton, B.D. Kozola, W. Wu, P.H. Geubelle, J.A. Lewis, N.R. Sottos and S.R. White
Type: Review
| 2010
| Item not available on this server.
Structural collapse of a wind turbine blade. Part A: static test and equivalent single layered models - L.C.T. Overgaard, E. Lund and O.T. Thomsen
Type: Article
| 2010
| Item not available on this server.
Hardening of an Al-Cu-Mg alloy containing type I and II S phase precipitates - T.S. Parel, S.C. Wang and M.J. Starink
Type: Article
| 2010
| Item availability restricted.
Extension of the virtual fields method to elasto-plastic material identification with cyclic loads and kinematic hardening - F. Pierron, S. Avril and V. The Tran
Type: Article
| 2010
| Item not available on this server.
Identification of Poisson's ratios of standard and auxetic low density polymeric foams from full-field measurements - Fabrice Pierron
Type: Article
| 2010
| Item availability restricted.
Redox flow cells: principles, characteristics and challenges - Carlos Ponce de Leon
Type: Conference or Workshop Item
| 2010
| Item not available on this server.
Development of a fabrication process for a MEMS component from ultra fine grained alloys - Xiao Guang Qiao
Type: Thesis
| 2010
Microembossing of ultrafine grained Al: microstructural analysis and finite element modelling - Xiao Guang Qiao, Mamadou T. Bah, Jiuwen Zhang, Nong Gao, Zakaria Moktadir, Michael Kraft and Marco J. Starink
Type: Article
| 2010
The influence of indenter tip rounding on the indentation size effect - Xiaoguang Qiao, Marco J. Starink and Nong Gao
Type: Article
| 2010
Denitrification in human dental plaque - F. Schreiber, P. Stief, A. Gieseke, I. Heisterkampa, W. Verstraete, D. DeBeer and P. Stoodley
Type: Article
| 2010
| Item not available on this server.
Comparison of the accumulation of fibre breaks occurring in a unidirectional carbon/epoxy composite identified in a multi-scale micro-mechanical model with that of experimental observations using high resolution computed tomography - A.E. Scott, I. Sinclair, S.M. Spearing, M.N. Mavrogordato, A.R. Bunsell and A. Thionnet
Type: Conference or Workshop Item
| 2010
| Item not available on this server.
Microstructural evolution of Fe-rich particles in an Al-Zn-Mg-Cu Alloy during equal-channel angular pressing - G. Sha, Y.B. Wang, X.Z. Liao, Z.C. Duan, S.P. Ringer and T.G. Langdon
Type: Article
| 2010
| Item not available on this server.
The characterisation of PbO2–coated electrodes prepared from aqueous methanesulfonic acid under controlled
deposition conditions - I. Sirés, C.T.J Low, C. Ponce de Leon and F.C Walsh
Type: Article
| 2010
| Item availability restricted.
The ionic conductivity of a Nafion® 1100 series of
proton-exchange membranes re-cast from butan-1-ol and propan-2-ol - S.M Slade, Tom Ralph, Carlos Ponce de Leon, S.A. Campbell and F.C. Walsh
Type: Article
| 2010
Characterisation of a re-cast composite Nafion® 1100 series of proton exchange membranes incorporating inert inorganic oxide particles - S.M. Slade, J.R Smith, S.A Campbell, T.R Ralph, C. Ponce de Leon and F.C. Walsh
Type: Article
| 2010
| Item availability restricted.
Comments on “Modelling differential scanning calorimetry curves of precipitation in Al-Cu-Mg” - M.J. Starink and Shuncai Wang
Type: Article
| 2010
| Item availability restricted.
Direct demonstration of a Staphylococcus biofilm in an external ventricular drain in a patient with a history of recurrent ventriculoperitoneal shunt failure - P. Stoodley, Jr. E.E. Braxton, L. Nistico, L. Hall-Stoodley, S. Johnson, M. Quigley, J.C. Post, G.D. Ehrlich and S. Kathju
Type: Article
| 2010
| Item not available on this server.
The effect of voids on the flexural fatigue properties of carbon/epoxy composites - Mohamed Azlan Suhot
Type: Thesis
| 2010
| Item not available on this server.
Direct observations of microstructural evolution in a two-phase Cu–Ag alloy processed by high-pressure torsion - Y.Z Tian, X.H An, S.D Wu, Z.F Zhang, Roberto B. Figueiredo, N. Gao and T.G. Langdon
Type: Article
| 2010
| Item not available on this server.
Unusual super-ductility at room temperature in an ultrafine-grained aluminum alloy - R.Z. Valiev, M.Yu Murashkin, A. Kilmametov, B. Straumal,, N.Q. Chinh and T.G. Langdon
Type: Article
| 2010
| Item not available on this server.
The art and science of tailoring materials by nanostructuring for advanced properties using SPD techniques - Ruslan Z. Valiev and Terence G. Langdon
Type: Article
| 2010
| Item not available on this server.
The characteristics of aluminum–scandium alloys processed by ECAP - K. Venkateswarlu, V. Rajinikanth, Ajoy Kumar Ray, Cheng Xu and Terence G. Langdon
Type: Article
| 2010
| Item not available on this server.
Effect of a Scandium addition on an Al-2% Si alloy processed by ECAP - K. Venkateswarlu, V. Rajinikanth,, A.K. Ray, C. Xu and T.G. Langdon
Type: Article
| 2010
| Item not available on this server.
Real time microsensor measurement of local metabolic activities in ex vivo dental biofilms treated with chlorhexidine - C. Von Ohle, A. Gieseke, L. Nistico, E.M. Decker, D. DeBeer and P. Stoodley
Type: Article
| 2010
| Item not available on this server.
Wear behaviour of Al-1050 alloy processed by severe plastic deformation - Chuan Ting Wang, Nong Gao, Robert J.K. Wood and Terence G. Langdon
Type: Book Section
| 2010
| Trans Tech Publications
| Item not available on this server.
Condition monitoring research in the national Centre for Advanced Tribology at Southampton (nCATS) - L. Wang
Type: Article
| 2010
| Item not available on this server.
The role of stacking faults and twin boundaries in grain refinement of a Cu–Zn alloy processed by high-pressure torsion - Y.B. Wang, X.Z.. Liao, Y.H. Zhao, E.J. Lavernia, S.P. Ringer, Z. Horita, T.G. Langdon and Y.T. Zhu,
Type: Article
| 2010
| Item not available on this server.
Nanocomposite microstructure and environment self-adapted tribological properties of highly hard graphite-like films - Yongxin Wang, Liping Wang, S. Wang, Guangan Zhang, Robert Wood and Qunji Xue
Type: Article
| 2010
| Item not available on this server.
Effect of bias voltage on microstructure and properties of Ti-doped graphite-like carbon films synthesized by magnetron sputtering - Yongxin Wang, Liping Wang, Guangan Zhang, S.C. Wang, R.J.K. Wood and Qunji Xue
Type: Article
| 2010
| Item availability restricted.
Interpretation of electrochemical measurements made during micro-scale abrasion-corrosion - R.J.K. Wood, D. Sun, M.R. Thakare, A. de Frutos Rozas and J.A. Wharton
Type: Article
| 2010
| Item not available on this server.
Principles of ECAP-conform as a continuous process for achieving grain refinement: application to an aluminum alloy, - Cheng Xu, Steven Schroeder, Patrick B. Berbon and Terence G. Langdon
Type: Article
| 2010
| Item not available on this server.
Synchrotron radiation computed laminography for polymer composite failure studies - Feng Xu, Lukas Helfen, Andrew J. Moffat, Gregory Johnson, Ian Sinclair and Tilo Baumbach
Type: Article
| 2010
| Item not available on this server.
Mechanical strength of extrusion freeformed calcium phosphate filaments - H. Y. Yang, X. P. Chi, S. Yang and J. R. G. Evans
Type: Article
| 2010
| Item not available on this server.
Influence of strain reversals during high pressure torsion process on strengthening in Al-Cu-Mg (-Li) alloy - Jiu When Zhang, Marco J. Starink, Nong Gao and Wen Long Zhou
Type: Article
| 2010
| Item not available on this server.
Al-Mg-Cu based alloys and pure Al processed by high pressure torsion: the influence of alloying additions on strengthening - Jiuwen Zhang, Nong Gao and Marco J. Starink
Type: Article
| 2010
Detection of material property errors in handbooks and databases using artificial neural networks with hidden correlations - Y.M. Zhang, J.R.G. Evans and S.F. Yang
Type: Article
| 2010
| Item availability restricted.
The prediction of solid solubility of alloys: developments and applications of Hume-Rothery’s rules - Y.M. Zhang, J.R.G. Evans and Shoufeng Yang
Type: Article
| 2010
The processing of pure titanium through multiple passes of ECAP at room temperature - Xicheng Zhao, Xirong Yang, Xiiaoyan Liu, Xingyun Wang and Terence G. Langdon
Type: Article
| 2010
| Item not available on this server.
Processing of nanostructured metals and alloys via plastic deformation - Yuntian T. Zhu, Ruslan Z. Valiev, Terence G. Langdon, Nobuhiro Tsuji and Ke Lu
Type: Article
| 2010
| Item not available on this server.