Items where Division is "Faculties (pre 2018 reorg) > Faculty of Engineering and the Environment (pre 2018 reorg) > Mechanical Engineering (pre 2018 reorg) > Engineering Mats & Surface Engineerg Gp (pre 2018 reorg)
Current Faculties > Faculty of Engineering and Physical Sciences > School of Engineering > Mechanical Engineering > Mechanical Engineering (pre 2018 reorg) > Engineering Mats & Surface Engineerg Gp (pre 2018 reorg)
Mechanical Engineering > Mechanical Engineering (pre 2018 reorg) > Engineering Mats & Surface Engineerg Gp (pre 2018 reorg)" and Year is 2011
 | Up a level |
Number of items: 103.
A
Eigenstrain modelling of residual stresses generated by arrays
of LSP shots - Mithila Achintha and David Nowell
Type: Article
| 2011
| Item availability restricted.
Thermodynamic stability of LaMnO3 and its competing oxides: A hybrid density functional study of an alkaline fuel cell catalyst - E.A. Ahmad, L. Liborio, D. Kramer, G. Mallia, A.R. Kucernak and N.M. Harrison
Type: Article
| 2011
| Item availability restricted.
Hardness homogeneity on longitudinal and transverse sections
of an aluminum alloy processed by ECAP - Saleh N. Alhajeri, Nong Gao and Terence G. Langdon
Type: Article
| 2011
| Item not available on this server.
The evolution of homogeneity during processing of commercial purity aluminium by ECAP - Saleh N. Alhajeri, M. Kawasaki, N. Gao and T G Langdon
Type: Article
| 2011
Formation of fivefold deformation twins in an ultrafine-grained copper alloy processed by high-pressure torsion - X.H. An, Q.Y. Lin, S.D. Wu, Z.F. Zhang, R.B. Figueiredo, N. Gao and T.G. Langdon
Type: Article
| 2011
| Item not available on this server.
The influence of stacking fault energy on the mechanical properties of nanostructured Cu and Cu–Al alloys processed by high-pressure torsion - X.H. An, Q.Y. Lin, S.D. Wu, Z.F. Zhang, R.B. Figueiredo, N. Gao and T.G. Langdon
Type: Article
| 2011
| Item not available on this server.
Significance of stacking fault energy on microstructural evolution in Cu and Cu-Al alloys processed by high-pressure torsion - X.H. An, Y. Lin, S.D. Wu, Z.F. Zhang, R.B. Figueiredo, N. Gao and T.G. Langdon
Type: Article
| 2011
| Item not available on this server.
B
Microstructural evolution of Mg-4%Nd alloy processed by high-pressure torsion - J. Bai, F. Xue, Saleh N. Alhajeri and Terence G. Langdon
Type: Article
| 2011
| Item not available on this server.
All-dielectric invisibility cloaks made of BaTiO3-loaded polyurethane foam - D. Bao, K.Z. Rajab, Y. Hao, E. Kallos, W.X. Tang, C. Argyropoulos, Y.Z. Piao and Shoufeng Yang
Type: Article
| 2011
| Item not available on this server.
Photocatalytic properties of rutile nanoparticles obtained via low temperature route from titanate nanotubes - Dmitry V. Bavykin, Alexander N. Kulak, Vitaly V. Shvalagin, Natalia S. Andryushina and Olexander L. Stroyuk
Type: Article
| 2011
| Item availability restricted.
Control over the hierarchical structure of titanate nanotube agglomerates - Dmitry V. Bavykin, Alexander N. Kulak and F.C. Walsh
Type: Article
| 2011
| Item availability restricted.
Comparative supragenomic analyses among the pathogens staphylococcus aureus, streptococcus pneumoniae, and haemophilus influenzae using a modification of the finite supragenome model - Robert Boissy, Azad Ahmed, Benjamin Janto, Josh Earl, Barry G Hall, Justin S Hogg, Gordon D Pusch, N Luisa Hiller, Evan Powell, Jay D Hayes, Susan Yu, Sandeep Kathju, Paul Stoodley, J Christopher Post, Garth D Ehrlich and Fen Z Hu
Type: Article
| 2011
Wafer curvature analysis in 3C-SiC layers grown
on (0 0 1) and (1 1 1) Si substrates - Matteo Bosi, Giovanni Attolini, Bernard E. Watts, Francesca Rossi, Claudio Ferrari, Ferenc Riesz and Liudi Jiang
Type: Article
| 2011
| Item not available on this server.
C
A rapid-doping method for high-throughput discovery applied to thick- film PTCR materials - Yulong Chen, Julian RG Evans and Shoufeng Yang
Type: Article
| 2011
PTCR effect in donor doped barium titanate: review of compositions, microstructures, processing and properties - Yulong Chen and Shoufeng Yang
Type: Article
| 2011
The effect of grain boundary sliding and strain rate sensitivity on the ductility of ultrafine-grained materials - N.Q. Chinh, T. Csanádi, J. Gubicza, R.Z. Valiev, B.B. Straumal and T.G. Langdon
Type: Article
| 2011
| Item not available on this server.
Texture evolution during room temperature ageing of silver processed by equal-channel angular pressing - Sandip Ghosh Chowdhury, Jeno Gubicza, B. Mahato, Nguyen Q. Chinh, Zoltan Hegedüs and Terence G. Langdon
Type: Article
| 2011
| Item not available on this server.
Texture evolution in Nd:YAG-laser welds of AZ31 magnesium alloy hot rolled sheets and its influence on mechanical properties - Loreleï Commin, Myriam Dumont, René Rotinat, Fabrice Pierron, Jean-Eric Masse and Laurent Barrallier
Type: Article
| 2011
| Item not available on this server.
Dissipated energy measurements as a marker of microstructural evolution: 316L and DP600 - N. Connesson, F. Maquin and F. Pierron
Type: Article
| 2011
| Item not available on this server.
Experimental energy balance during the first cycles of cyclically loaded specimens under the conventional yield stress - N. Connesson, F. Maquin and F. Pierron
Type: Article
| 2011
| Item not available on this server.
Plastic behavior of fcc metals over a wide range of strain: macroscopic and microscopic descriptions and their relationship - Tamas Csanádi, Nguyen Q. Chinh, Jeno Gubicza and Terence G. Langdon
Type: Article
| 2011
| Item not available on this server.
D
Improved tribological behavior of DLC films under water lubrication by surface texturing - Qi Ding, Liping Wang, Yonqxin Wang, S.C. Wang, Litian Hu and Qunji Xue
Type: Article
| 2011
| Item not available on this server.
Effect of special ECAP die configuration on microhardness distribution in pure aluminium - Zhi Chao Duan and Terence G. Langdon
Type: Article
| 2011
| Item not available on this server.
An experimental evaluation of a special ECAP die containing two equal arcs of curvature - Zhi Chao Duan and Terence G. Langdon
Type: Article
| 2011
| Item not available on this server.
F
Modelling the performance of fluorescent solar collectors - Liping Fang, Thomas Parel, Lefteris Danos and Tom Markvart
Type: Conference or Workshop Item
| 2011
Structural evolution on the cross-section of am AZ31 magnesium alloy processed by high-pressure torsion - Roberto B. Figueiredo and T.G. Langdon
Type: Article
| 2011
| Item not available on this server.
Geometrically nonlinear thermomechanical response of circular sandwich plates with a compliant core - Y. Frostig and O.T. Thomsen
Type: Article
| 2011
| Item not available on this server.
Non-linear thermo-mechanical behaviour of delaminated curved sandwich panels with a compliant core - Y. Frostig and O.T. Thomsen
Type: Article
| 2011
| Item not available on this server.
G
Wear resistance of SPD-processed alloys - Nong Gao, Chuan Ting Wang, Robert J.K. Wood and Terence G. Langdon
Type: Book Section
| 2011
| Trans Tech Publications
| Item not available on this server.
Determination of kinetic parameters from calorimetric study of solid state reactions in 7150 Al-Zn-Mg alloy - K.S. Ghosh, and N. Gao
Type: Article
| 2011
| Item not available on this server.
Stability of ultrafine-grained microstructure in fcc metals processed by severe plastic deformation - J Gubicza, N.Q. Chinh, S.V. Dobatkin, E Khosravi and T.G. Langdon
Type: Article
| 2011
| Item not available on this server.
Type: Book Section
| 2011
| Springer
| Item not available on this server.
H
Electrodeposition of polypyrrole–titanate nanotube composites coatings and their corrosion resistance - P Herrasti, A.N. Kulak, D.V. Bavykin, Carlos Ponce de Leon, J. Zekonyte and F.C. Walsh
Type: Article
| 2011
| Item availability restricted.
Using atomic force microscopy to examine flow processes in materials processed by ECAP - Yi Huang and Terence G. Langdon
Type: Article
| 2011
| Item not available on this server.
J
Formation and mechanical characterisation of SU8 composite films reinforced with horizontally aligned and high volume fraction CNTs - L. Jiang, S.M. Spearing, M.A. Monclus and N.M. Jennett
Type: Article
| 2011
| Item availability restricted.
K
Achieving superplastic properties in a Pb-Sn eutectic alloy processed by equal-channel angular pressing - M Kawasaki, A de A Mendes, V.L. Sordi, M Ferrante and T.G. Langdon
Type: Article
| 2011
| Item not available on this server.
Developing the technique of severe deformation processing through high-pressure torsion - M. Kawasaki and T.G. Langdon
Type: Article
| 2011
| Item not available on this server.
Creep behavior of metals processed by equal-channel angular pressing - M. Kawasaki, V. Sklenička and T.G. Langdon
Type: Article
| 2011
| Item not available on this server.
An investigation of hardness homogeneity throughout disks processed by high-pressure torsion - Megumi Kawasaki, Roberto B. Figueiredo and Terence G. Langdon
Type: Article
| 2011
| Item not available on this server.
Characterizing elastic properties of superconducting windings by simulations and experiments - J-H Kim, F. Nunio, F. Pierron and P. Vedrine
Type: Article
| 2011
| Item not available on this server.
Application of the homotopy analysis method to determine the analytical limit state functions and reliability index for large deflection of a cantilever beam subjected to static co-planar loading - A. Kimiaeifar, E. Lund, O.T. Thomsen and J.D. Sørensen
Type: Article
| 2011
| Item not available on this server.
Evaluation of closed-form solutions based on the HPM and HAM approaches for the steady flow of third grade fluids in a porous half space - A. Kimiaeifar, O.T. Thomsen and E. Lund
Type: Article
| 2011
| Item not available on this server.
Laser-Generated Shockwave for Clearing Medical Device Biofilms - Victor Kizhner, Yosef P. Krespi, Luanne Hall-Stoodley and Paul Stoodley
Type: Article
| 2011
| Item not available on this server.
Laser disruption and killing of methicillin-resistant Staphylococcus aureus biofilms - Yosef P Krespi, Victor Kizhner, Laura Nistico, Luanne Hall-Stoodley and Paul Stoodley
Type: Article
| 2011
| Item not available on this server.
Mechanical characteristics of Zn-22% Al and Al-3% Mg alloys processed to high strains by ECAP - P. Kumar and T.G. Langdon
Type: Article
| 2011
| Item not available on this server.
L
Morphology control via dual solvent crystallization for high-mobility functionalized pentacene-blend thin film transistors - Maria Lada, Marco J. Starink, Miguel Carrasco, Lichun Chen, Pawel Miskiewicz, Paul Brookes, Margaret Obarowska and David C. Smith
Type: Article
| 2011
Processing by severe plastic deformation: historical developments and current impact - Terence G. Langdon
Type: Article
| 2011
| Item not available on this server.
Characterization of a zinc-cerium flow battery - P.K. Leung, C. Ponce de Leon, C.T.J. Low, A.A. Shah and F.C. Walsh
Type: Article
| 2011
| Item availability restricted.
An undivided zinc-cerium redox flow battery operating at room temperature - P.K. Leung, C. Ponce de Leon and F.C. Walsh
Type: Article
| 2011
| Item availability restricted.
Type: Article
| 2011
| Item not available on this server.
Identification and analysis of intermetallic phases in overaged Zr-containing and Cr-containing Al-Zn-Mg-Cu alloys - X.M. Li and M.J. Starink
Type: Article
| 2011
Validation of finite element structural simulation for ohmic microcontact - Hong Liu, Dimitri Leray, Patrick Pons, Adrien Broue and Julien Martegoutte
Type: Article
| 2011
Microstructural evolution in an Al-6061 alloy processed by high-pressure torsion and rapid annealing - A Loucif, R. B. Figueiredo, T Baudin, F Brisset and T.G. Langdon
Type: Article
| 2011
| Item not available on this server.
Structure characterization and tribological study of magnetron sputtered nanocomposite nc-TiAlV(N, C)/a-C coatings - Q. Luo, S.C. Wang, Z. Zhou and L. Chen
Type: Article
| 2011
M
The structure and cross-linking of collagen in asthma - W. Manuyakorn, O. Katsamenis, T. Li, P. Thurner, D. Davies and P. Howarth
Type: Conference or Workshop Item
| 2011
| Item not available on this server.
Type: Article
| 2011
Correlation between shear punch and tensile measurements for an AZ31 Mg alloy processed by equal-channel angular pressing - S.M. Masoudpanah, R Mahmudi and T.G. Langdon
Type: Article
| 2011
| Item not available on this server.
Real time monitoring of progressive damage during loading of a simplified total hip stem construct using embedded acoustic emission sensors - Mark Mavrogordato, Mark Taylor, Andrew Taylor and Martin Browne
Type: Article
| 2011
| Item not available on this server.
Analysis of fatigue crack initiation and S-N response of model cast aluminium piston alloys - Thomas O. Mbuya, Ian Sinclair, Andrew J. Moffat and Philippa A.S. Reed
Type: Article
| 2011
| Item availability restricted.
Ductile crack initiation and propagation assessed via in situ synchrotron radiation-computed laminography - T.F. Morgeneyer, L. Helfen, I. Sinclair, H. Proudhon, F. Xu and T. Baumbach
Type: Article
| 2011
| Item not available on this server.
Full-field strain measurement and identification of composites moduli at high strain rate with the virtual fields method - R. Moulart, F. Pierron, S. R. Hallett and M. R. Wisnom
Type: Article
| 2011
| Item not available on this server.
N
Grain size effect on deformation twinning and de-twinning in a nanocrystalline Ni-Fe alloy - S. Ni, Y.B. Wang, X. Z. Liao, S.N. Alhajeri, Hh. Q. Li, S. P. Ringer, T.G. Langdon and Y.T. Zhu
Type: Article
| 2011
| Item not available on this server.
Strain hardening and softening in a nanocrystalline Ni–Fe alloy induced by severe plastic deformation - S. Ni, Y.B. Wang, X.Z. Liao, S.N. Alhajeri, H.Q. Li, Y.H. Zhao, E.J. Lavernia, T.G. Langdon and Y.T. Zhu
Type: Article
| 2011
| Item not available on this server.
Grain growth and dislocation density evolution in a nanocrystalline Ni–Fe alloy induced by high-pressure torsion - S. Ni, Y.B. Wang, X.Z. Liao, S.N. Alhajeri, H.Q. Li, Y.H. Zhao, E.J. Lavernia,, S.P. Ringer, T.G. Langdon and Y.T. Zhu
Type: Article
| 2011
| Item not available on this server.
An Adenoid reservoir for pathogenic biofilm bacteria - L. Nistico, R. Kreft, A. Gieseke, J.M. Coticchia, A. Burrows, P. Khampang, Y. Liu, J.E. Kerschner, J.C. Post, S. Lonergan, R. Sampath, F.Z. Hu, G.D. Ehrlich, P. Stoodley and L. Hall-Stoodley
Type: Article
| 2011
| Item not available on this server.
O
Nano-electromechanical switchable photonic metamaterials - J-Y. Ou, E. Plum, L. Jiang and N.I. Zheludev
Type: Conference or Workshop Item
| 2011
Type: Conference or Workshop Item
| 2011
Type: Article
| 2011
| Item not available on this server.
P
Ultra high speed DIC and virtual fields method analysis of a three point bending impact test on an aluminium bar - F. Pierron, M. A. Sutton and V. Tiwari
Type: Article
| 2011
| Item not available on this server.
Improvements in direct borohydride fuel cells using three-dimensional electrodes - Carlos Ponce de Leon, A. Kulak, S. Williams, I. Merino-Jimenez and F.C. Walsh
Type: Article
| 2011
| Item availability restricted.
Q
Predicting the grain refinement due to cold embossing of an Al alloy - Xiao Guang Qiao, Nong Gao and Marco J. Starink
Type: Monograph
| 2011
| Item availability restricted.
R
Influence of scandium on an Al-2% Si alloy processed by high-pressure torsion - V. Rajinikanth, K. Venkateswarlu, M.K. Sen, M. Das, S.N. Alhajeri and T.G. Langdon
Type: Article
| 2011
| Item not available on this server.
The preparation of PbO2 coatings on reticulated vitreous carbon for the electro-oxidation of organic pollutants - F.J. Recio, P. Herrasti Gonzalez, I. Sires, A.N. Kulak, D.V. Bavykin, C. Ponce de Leon and F.C. Walsh
Type: Article
| 2011
| Item availability restricted.
S
Thermo-mechanical load interactions in foam cored axi-symmetric sandwich circular plates – high-order and FE models - C. Santiuste, O.T. Thomsen and Y. Frostig
Type: Article
| 2011
| Item not available on this server.
Lifing predictions for Nickel based superalloys exhibiting sustained macroscopic deflected fatigue crack - C Schoettle, P.A.S. Reed, I. Sinclair and M.J. Starink
Type: Conference or Workshop Item
| 2011
| Item not available on this server.
High resolution damage detection of loaded carbon/epoxy laminates using synchrotron radiation computed tomography - A.E. Scott, W. Hepples, N. Kalantzis, P. Wright, M.N. Mavrogordato, I. Sinclair and S.M. Spearing
Type: Conference or Workshop Item
| 2011
| Item not available on this server.
In situ fibre fracture measurement in carbon-epoxy laminates using high resolution computed tomography - A.E. Scott, Mark N. Mavrogordato, Peter Wright, I. Sinclair and S.M. Spearing
Type: Article
| 2011
| Item availability restricted.
Influence of strain rate on the characteristics of a magnesium alloy processed by high-pressure torsion - Pauline Serre, Roberto B. Figueiredo, Nong Gao and Terence G. Langdon
Type: Article
| 2011
| Item not available on this server.
Effect of equal-channel angular pressing on the creep resistance of precipitation-strengthened alloys - Vàclav Sklenička, Petr Král, Jiří Dvořák, Marie Kvapilová, Megumi Kawasaki and Terence G. Langdon
Type: Article
| 2011
| Item not available on this server.
The effect of shot peening on notched low cycle fatigue - K.A. Soady, B.G. Mellor, J. Shackleton, A. Morris and P.A.S. Reed
Type: Article
| 2011
Type: Conference or Workshop Item
| 2011
| Item not available on this server.
The thermodynamics of and strengthening due to
co-clusters in ternary Al alloys: 2xxx and 6xxx alloys - M.J. Starink
Type: Conference or Workshop Item
| 2011
| Item not available on this server.
Characterization of a mixed MRSA/MRSE biofilm in an explanted total ankle arthroplasty - Paul Stoodley, Stephen F. Conti, Patrick J. DeMeo, Laura Nistico, Rachael Melton-Kreft, Sandra Johnson, Ali Darabi, Garth D. Ehrlich, J. William Costerton and Sandeep Kathju
Type: Article
| 2011
| Item not available on this server.
Similar damage initiation but different failure behavior in trabecular and cortical bone tissue - M. E. Szabó, J. Zekonyte, O.L. Katsamenis, M. Taylor and P. J. Thurner
Type: Article
| 2011
| Item not available on this server.
T
The use of a rotating cylinder electrode to selective recover palladium from acid solutions used to manufacture automotive catalytic converters - J.E. Terrazas-Rodriguez, S. Gutierrez-Granados, M.A. Alatorre-Ordaz, Carlos Ponce de Leon and F.C. Walsh
Type: Article
| 2011
| Item availability restricted.
Assessment of the interface shear strength of metal-polymer system based on the single filament fragmentation test method - O.T. Thomsen and S. Charca
Type: Article
| 2011
| Item not available on this server.
Microstructural evolution and mechanical properties of a two-phase Cu–Ag alloy processed by high-pressure torsion to ultrahigh strains - Y.Z. Tian, S.D. Wu, Z.F. Zhang, R.B. Figueiredo, N. Gao and T.G. Langdon
Type: Article
| 2011
| Item not available on this server.
Strain hardening behavior of a two-phase Cu–Ag alloy processed by high-pressure torsion - Y.Z. Tian, S.D. Wu, Z.F. Zhang, R.B. Figueiredo, N. Gao and T.G. Langdon
Type: Article
| 2011
| Item not available on this server.
V
Towards superstrength of nanostructured metals and alloys processed by SPD - R.Z Valiev, N.A. Enikeev and T.G. Langdon
Type: Article
| 2011
| Item not available on this server.
Application of high-pressure torsion to Al-Si alloys with and without scandium additions - K. Venkateswarlu, V. Rajinikanth, S.N. Alhajeri and T.G. Langdon
Type: Article
| 2011
| Item not available on this server.
W
Wear behavior of an aluminum alloy processed by equal-channel angular pressing - Chuan Ting Wang, Nong Gao, Robert J.K. Wood and Terence G. Langdon
Type: Article
| 2011
| Item not available on this server.
Effect of thermal input on finite element predictions of welding residual stresses - Ai Hui Wu, Stavros Syngellakis and B.G. Mellor
Type: Article
| 2011
| Item not available on this server.
X
Characterization of acoustic emission signals from particulate filled thermoset and thermoplastic polymeric coatings in four point bend tests - Y. Xu and B.G. Mellor
Type: Article
| 2011
Mechanical properties of Al-6061 and an Al-6061 metal matrix composite processed by high-pressure torsion - C. Xu,, Z. Horita and T.G. Langdon
Type: Article
| 2011
| Item not available on this server.
Z
Decomposition of nanostructured martensite in Cu-Al alloys processed by high-pressure torsion - G.F. Zhang, X. Sauvage, J.T Wang, N. Gao and T.G. Langdon
Type: Article
| 2011
| Item not available on this server.
Microstructure development and hardening during high pressure torsion of commercially pure aluminium: strain reversal experiments and a dislocation based model - Jiuwen Zhang, Nong Gao and Marco J. Starink
Type: Article
| 2011
Effect of Mg addition on strengthening of aluminium alloys subjected to different strain paths in high pressure torsion - Jiuwen Zhang, Marco J. Starink, Nong Gao and Wenlong Zhou
Type: Article
| 2011
| Item not available on this server.
Microstructure and mechanical properties of ultra-fine grain AZ80 alloy processed by back pressure equal channel angular pressing - Nianxian Zhang, Hua Ding, Jizhong Li, Xiaolin Wu, Yinglong Li and Kenong Xia
Type: Article
| 2011
| Item not available on this server.
Corrected values for boiling points and enthalpies of vaporization of elements in handbooks - Yiming Zhang, Julian R.G. Evans and Shoufeng Yang
Type: Article
| 2011
Contribution of twins to the strengthening of commercial purity titanium after equal-channel angular pressing - Yue Zhang, Saleh N. Alhajeri, Roberto B. Figueiredo, Nong Gao, Jing Tao Wang and Terence G. Langdon
Type: Article
| 2011
| Item not available on this server.
Structure and mechanical properties of commercial purity titanium processed by ECAP at room temperature - Yue Zhang, Roberto B. Figueiredo, Saleh N. Alhajeri, Jing Tao Wang, Nong Gao and Terence G. Langdon
Type: Article
| 2011
| Item not available on this server.
Generic protease detection technology for monitoring periodontal disease - Xinwei Zheng, Joseph P. Cook, Michael Watkinson, Shoufeng Yang, Ian Douglas, Andrew Rawlinson and Steffi Krause
Type: Article
| 2011
Comparative study of simplex doped nc-WC/a-C and duplex doped nc-WC/a-C(Al) nanocomposite coatings - Shengguo Zhou, Liping Wang, S.C. Wang and Qunji Xue
Type: Article
| 2011
| Item not available on this server.