Items where Division is "Faculties (pre 2018 reorg) > Faculty of Engineering and the Environment (pre 2018 reorg) > Mechanical Engineering (pre 2018 reorg) > Engineering Mats & Surface Engineerg Gp (pre 2018 reorg)
Current Faculties > Faculty of Engineering and Physical Sciences > School of Engineering > Mechanical Engineering > Mechanical Engineering (pre 2018 reorg) > Engineering Mats & Surface Engineerg Gp (pre 2018 reorg)
Mechanical Engineering > Mechanical Engineering (pre 2018 reorg) > Engineering Mats & Surface Engineerg Gp (pre 2018 reorg)" and Year is 2014
 | Up a level |
Number of items: 125.
Stress relaxation in shot–peened geometric features subjected to fatigue: experiments and modelling - Mithila Achintha, Chao You, Binyan He, K.A. Soady and P.A.S. Reed
Type: Article
| 2014
Superplasticity of a fine-grained Mg–9Gd–4Y–0.4Zr alloy evaluated using shear punch testing - Reza Alizadeh, Reza Mahmudi and Terence G. Langdon
Type: Article
| 2014
| Item not available on this server.
Twinning via the motion of incoherent twin boundaries nucleated at grain boundaries in a nanocrystalline Cu alloy - X.H. An, M. Song, Y. Huang, X.Z. Liao, S.P. Ringer, T.G Langdon and Y.T. Zhu
Type: Article
| 2014
| Item not available on this server.
Effect of short-term annealing on the microstructures and flow properties of an Al-1% Mg alloy processed by high-pressure torsion - Olivier Andreau, Jenő Gubicza, Nian Xian Zhang, Yi Huang, Péter Jenei and Terence G. Langdon
Type: Article
| 2014
| Item not available on this server.
Nanomechanical assessment of human and murine collagen fibrils via atomic force microscopy cantilever-based nanoindentation - Orestis G. Andriotis, Wiparat Manuyakorn, Jurgita Zekonyte, Orestis Katsamenis, Sebastien Fabri, Peter H. Howarth, Donna E. Davies and Philipp J. Thurner
Type: Article
| 2014
| Item not available on this server.
Effect of stacking fault energy on steady-state creep rate of face centred cubic metals - A. Ayensu, T.G. Langdon, A. Owusu and K Akuffo-Kumi
Type: Article
| 2014
| Item not available on this server.
An in situ synchrotron X-ray diffraction study of precipitation kinetics in a severely deformed Cu-Ni-Si alloy - H. Azzeddine, B. Mehdi, L. Hennet, D. Thiaudiere, B. Alili, M. Kawasaki, D. Bradai and T.G. Langdon
Type: Article
| 2014
| Item not available on this server.
Microstructural evolution of cryomilled Ti/Al mixture during high-pressure torsion - H. Bahmanpour, Y. Sun, T. Hu, D. Zhang, J. Wongsa-Ngam, T.G. Langdon and E.J. Lavernia
Type: Article
| 2014
| Item not available on this server.
Type: Thesis
| 2014
Identification of dynamic loading on a bending plate using the virtual fields method - Alain Berry, Olivier Robin and Fabrice Pierron
Type: Article
| 2014
| Item not available on this server.
High-pressure torsion of Ti: synchrotron characterization of phase volume fraction and domain sizes - Raúl E. Bolmaro, Vitor L. Sordi, Maurizio Ferrante, Heinz-Günter Brokmeier, Megumi Kawasaki and Terence G. Langdon
Type: Article
| 2014
| Item not available on this server.
Micro-mechanistic analysis of in situ crack growth in toughened carbon/epoxy laminates to develop micro-mechanical fracture models - G. Borstnar, M.N. Mavrogordato, I. Sinclair and S.M. Spearing
Type: Conference or Workshop Item
| 2014
The influence of toughening-particles in CFRPs on low velocity impact damage resistance performance - D.J. Bull, A.E. Scott, S.M. Spearing and I. Sinclair
Type: Article
| 2014
Concurrent microstructural evolution of ferrite and austenite in a duplex stainless steel processed by high-pressure torsion - Y. Cao, Y.B. Wang, X.H. An, X.Z. Liao, M. Kawasaki, S.P. Ringer, T.G. Langdon and Y.T. Zhu
Type: Article
| 2014
| Item not available on this server.
Type: Thesis
| 2014
Solute segregation on structural defects in an ultrafine-grained Al-Cu-Mg alloy - Ying Chen, Nong Gao, Gang Sha, Simon P. Ringer and Marco J. Starink
Type: Conference or Workshop Item
| 2014
| Item not available on this server.
Development of homogeneity in an Al-6061 alloy processed by ECAP and ECAP-Conform - Xu Cheng and Terence G. Langdon
Type: Article
| 2014
| Item not available on this server.
Grain boundary phenomena in an ultrafine-grained Al-Zn alloy with improved mechanical behavior for micro-devices - Nguyen Q. Chinh, Ruslan Z. Valiev, Xavier Sauvage, Gábor Varga, Károly Havancsák, Megumi Kawasaki, Boris B. Straumal and Terence G. Langdon
Type: Article
| 2014
| Item not available on this server.
Microstructural evolution and mechanical properties in a Zn-Al eutectoid alloy processed by high-pressure torsion - T.S. Cho, H.J. Lee, B. Ahn, M. Kawasaki and T.G. Langdon
Type: Article
| 2014
| Item not available on this server.
Evolution of plasticity, strain-rate sensitivity and the underlying deformation mechanism in Zn-22%Al during high-pressure torsion - I.C. Choi, Y.J. Kim, B. Ahn, M. Kawasaki, T.G. Langdon and J.I. Jiang
Type: Article
| 2014
| Item not available on this server.
High-cycle fatigue behavior of Zn–22% Al alloy processed by high-pressure torsion - In-Chul Choi, Byung-Gil Yoo, Oliver Kraft, Ruth Schwaiger, Moo-Young Seok, Megumi Kawasaki, Terence G. Langdon and Jae-il Jang
Type: Article
| 2014
| Item not available on this server.
General anisotropy identification of paperboard with virtual fields method - J.M. Considine, F. Pierron, K.T. Turner and D.W. Vahey
Type: Article
| 2014
| Item not available on this server.
Dynamic analysis of composite marine structures using full-field measurement techniques - G. Crammond, S.W. Boyd and J.M. Dulieu-Barton
Type: Article
| 2014
Characterization of stress-strain relationships in Al over a wide range of testing temperatures - R.T. Csanádi, N.Q. Chinh, J. Gubicza, G. Vőrős and T.G. Langdon
Type: Article
| 2014
| Item not available on this server.
Mechanical properties and microstructure evolution in an aluminum 6082 alloy processed by high-pressure torsion - Ehab El-Danaf, Megumi Kawasaki, Magdy El-Rayes, Muneer Baig, Jabair Ali Mohammed and Terence G. Langdon
Type: Article
| 2014
| Item not available on this server.
Adsorption of bovine serum albumin on Zr co-sputtered a-C(:H) films: implication on wear behaviour - A Escudeiro, T. Polcar and A Cavaleiro
Type: Article
| 2014
| Item not available on this server.
Tribological behaviour of W-alloyed carbon-based coatings in dry and lubricated sliding contact - M. Evaristo, T. Polcar and A. Cavaleiro
Type: Article
| 2014
| Item not available on this server.
Type: Thesis
| 2014
Processing magnesium alloys by severe plastic deformation - Roberto B. Figueiredo, Maria Teresa P. Aguilar, Paulo Roberto Cetlin and Terence G. Langdon
Type: Article
| 2014
| Item not available on this server.
Evaluating the superplastic flow of a magnesium AZ31 alloy processed by equal-channel angular pressing - Roberto B. Figueiredo and Terence G. Langdon
Type: Article
| 2014
| Item not available on this server.
Improving the fatigue behavior of dental implants through processing commercial purity titanium by equal-channel angular pressing - Roberto B. Figueiredo, Eduardo R. de C. Barbosa, Xicheng Zhao, Xirong Yang, Xiaoyan Liu, Paulo R. Cetlin and Terence G. Langdon
Type: Article
| 2014
| Item not available on this server.
Fatigue micromechanism characterisation in carbon fibre reinforced polymers using synchrotron radiation computed tomography - S.C. Garcea, M.N. Mavrogordato, A.E. Scott, I. Sinclair and S.M. Spearing
Type: Article
| 2014
Strain-induced martensite to austenite reverse transformation in an ultrafine-grained Fe–Ni–Mn martensitic steel - H. Ghasemi-Nanesa, M. Nili-Ahmadabadi, H.R. Koohdar, M. Habibi-Parsa, S. Hossein Nedjad, S.A. Alidokht and Terence G. Langdon
Type: Article
| 2014
| Item not available on this server.
The application of digital volume correlation (DVC) to study the microstructural behaviour of trabecular bone during compression - F. Gillard, R. Boardman, Mark Mavrogordato, D. Hollis, I. Sinclair, F. Pierron and M. Browne
Type: Article
| 2014
| Item not available on this server.
Characterizations of how species mediate ecosystem properties require more comprehensive functional effect descriptors - R. Hale, M.N. Mavrogordato, T.J. Tolhurst and M. Solan
Type: Article
| 2014
Anodization behaviour of high pressure torsion processed Titanium - Nan Hu, M.J. Starink and Nong Gao
Type: Conference or Workshop Item
| 2014
| Item not available on this server.
An overview of flow patterns development on disc lower surfaces when processing by high-pressure torsion - Yi Huang, Ahmed Al-Zubaydi, Megumi Kawasaki and Terence G. Langdon
Type: Article
| 2014
| Item not available on this server.
Effect of anvil roughness on the flow patterns and hardness development in high-pressure torsion - Yi Huang, Megumi Kawasaki, Ahmed Al-Zubaydi and Terence G. Langdon
Type: Article
| 2014
| Item not available on this server.
An evaluation of the shearing patterns introduced by different anvil alignments in high-pressure torsion - Yi Huang, Megumi Kawasaki and Terence G. Langdon
Type: Article
| 2014
| Item not available on this server.
Factors influencing the shearing patterns in high-pressure torsion - Yi Huang, Megumi Kawasaki and Terence G. Langdon
Type: Article
| 2014
| Item not available on this server.
Microstructures and mechanical properties of pure tantalum processed by high-pressure torsion - Yi Huang, Nicolas Maury, Nian Xian Zhang and Terence G. Langdon
Type: Article
| 2014
Application of light harvesting materials to silicon photovoltaics - Mohd Adib Ibrahim
Type: Thesis
| 2014
Grain size effects in a Ni-based turbine disc alloy in the time and cycle dependent crack growth regimes - R. Jiang, S. Everitt, M. Lewandowski, N. Gao and P.A.S. Reed
Type: Article
| 2014
| Item not available on this server.
Correlation between hydrogen storage properties and textures induced in magnesium through ECAP and cold rolling - A.M. Jorge, G.F. de Lima, M.R.M. Triques, W.J. Botta, C.S. Kiminami, R.P. Nogueira, A.R. Yavari and T.G. Langdon
Type: Article
| 2014
| Item not available on this server.
The effect of microstructure heterogeneity on the microscale deformation of ultrafine-grained aluminum - Adam D. Kammers, Jittraporn Wongsa-Ngam, Terence G. Langdon and Samantha Daly
Type: Article
| 2014
| Item not available on this server.
Preparation and characterization of bioadhesive microparticles comprised of low degree of quaternization trimethylated chitosan for nasal administration: effect of concentration and molecular weight - Christina Karavasili, Orestis Katsamenis, Nikolaos Bouropoulos, Hamde Nazar, Philipp J Thurner, Susanna M van der Merwe and Dimitrios G Fatouros
Type: Article
| 2014
| Item not available on this server.
Interpretation of hardness evolution in metals processed by high-pressure torsion - Megumi Kawasaki, Roberto B. Figueiredo, Yi Huang and Terence G. Langdon
Type: Article
| 2014
| Item not available on this server.
The flow characteristics of superplasticity - Megumi Kawasaki, Roberto B. Figueiredo and Terence G. Langdon
Type: Article
| 2014
| Item not available on this server.
The characteristics of two-phase Al-Cu and Zn-Al alloys processed by high-pressure torsion - Megumi Kawasaki and Terence G. Langdon
Type: Article
| 2014
| Item not available on this server.
Evaluating the flow properties of ultrafine-grained materials - Megumi Kawasaki and Terence G. Langdon
Type: Article
| 2014
| Item not available on this server.
Microstructure development and superplasticity in a Zn-22% Al eutectoid alloy processed by severe plastic deformation - Megumi Kawasaki and Terence G. Langdon
Type: Article
| 2014
| Item not available on this server.
Producing ultrafine-grained materials through severe plastic deformation - Megumi Kawasaki and Terence G. Langdon
Type: Article
| 2014
| Item not available on this server.
Review: achieving superplasticity in metals processed by high-pressure torsion - Megumi Kawasaki and Terence G. Langdon
Type: Article
| 2014
| Item not available on this server.
Evolution of hardness in ultrafine-grained metals processed by high-pressure torsion - Megumi Kawasaki, Han-Joo Lee, Byungmin Ahn, Alexander P. Zhilyaev and Terence G. Langdon
Type: Article
| 2014
| Item not available on this server.
Evolution of hardness, microstructure, and strain rate sensitivity in a Zn-22% Al eutectoid alloy processed by high-pressure torsion - Megumi Kawasaki, Han-Joo Lee, In-Chul Choi, Jae-il Jang, Byungmin Ahn and Terence G. Langdon
Type: Article
| 2014
| Item not available on this server.
Determination of anisotropic plastic constitutive parameters using the virtual fields method - J.-H. Kim, F. Barlat, F. Pierron and M.-G. Lee
Type: Article
| 2014
| Item not available on this server.
The flow behavior of ultrafine-grained materials - Terence G. Langdon
Type: Article
| 2014
| Item not available on this server.
Sliding properties of MoS2 layers: load and interlayer orientation effects - G. Levita, A. Cavaleiro, E. Molinari, T. Polcar and M.C. Righi
Type: Article
| 2014
| Item not available on this server.
Carbon nanotube composite surfaces for electrical contacts of MEMS switches - Adam P. Lewis, Liudi Jiang, S.M. Spearing, Michael Down, Chamaporn Chianrabutra, John W. McBride, Suan-Hui Pu and Hong Liu
Type: Conference or Workshop Item
| 2014
Influence of Zr alloying on the mechanical properties, thermal stability and oxidation resistance of Cr-Al-N coatings - W.Z. Li, Q.Z. Chen, T. Polcar, R Serra and A Cavaleiro
Type: Article
| 2014
| Item not available on this server.
Vibratory micro-dispensing technology of bulk solids and its application in pharmaceuticals and biomaterials - Zongqi Li
Type: Thesis
| 2014
Investigation of the benefit of MWCNT forests for electrical contacts - Hong Liu, Adam P. Lewis, Michael Down, Liudi Jiang and John W. McBride
Type: Conference or Workshop Item
| 2014
Influence of the height of carbon nanotubes on hot switching of Au/Cr-Au/MWCNT contact pairs - Hong Liu, Adam P. Lewis, Suan-Hui Pu, Liudi Jiang and John W. McBride
Type: Conference or Workshop Item
| 2014
Processing different magnesium alloys through HPT - Livia R.C. Malheiros, Roberto B. Figueiredo and Terence G. Langdon
Type: Article
| 2014
| Item not available on this server.
Microstructural evolution and microhardness in a low carbon steel processed by high-pressure torsion - Diana Maritza Marulanda Cardona, Jittraporn Wongsa-Ngam and Terence G. Langdon
Type: Article
| 2014
Micromechanisms of short fatigue crack growth in an Al-Si piston alloy - Thomas O. Mbuya and P.A.S. Reed
Type: Article
| 2014
Investigation of the current on the wear area of Au/Cr-Au/MWCNT contact pair - John W. McBride, Hong Liu, Chamaporn Chianrabutra and Adam P. Lewis
Type: Conference or Workshop Item
| 2014
Type: Thesis
| 2014
A critical examination of the paradox of strength and ductility in ultrafine-grained metals - Tarang Mungole, Praveen Kumar, Megumi Kawasaki and Terence G. Langdon
Type: Article
| 2014
| Item not available on this server.
DLC-W coatings tested in combustion engine - frictional and wear analysis - P. Mutafov, J. Lanigan, A. Neville, A. Cavaleiro and T. Polcar
Type: Article
| 2014
| Item not available on this server.
A Fourier-series-based virtual fields method for the identification of 2-D stiffness and traction distributions - T.T. Nguyen, J.M. Huntley, I.A. Ashcroft, P.D. Ruiz and F. Pierron
Type: Article
| 2014
| Item not available on this server.
A Fourier-series-based virtual fields method for the identification of 2-D stiffness distributions - T.T. Nguyen, J.M. Huntley, I.A. Ashcroft, P.D. Ruiz and F. Pierron
Type: Article
| 2014
| Item not available on this server.
Structural reinforcement of microvascular networks using electrostatic layer-by-layer assembly with halloysite nanotubes - Solar C. Olugebefola, Andrew R. Hamilton, Daniel J. Fairfield, Nancy R. Sottos and Scott R. White
Type: Article
| 2014
Mechanical property evaluation of an Al-2024 alloy subjected to HPT processing - Deepak C. Patil, K. Venkateswarlu, S.A. Kori, Goutam Das, Mousumi Das, Saleh N. Alhajeri and Terence G. Langdon
Type: Article
| 2014
Analysis of plastic deformation and sample geometry during the compression stage in high-pressure torsion - P.H.P. Pereira, T.H.P. Costa, R.B. Figueiredo, P.R. Cetlin and Terence G. Langdon
Type: Article
| 2014
| Item not available on this server.
Using finite element modelling to examine the flow process and temperature evolution in HPT under different constraining conditions - P.H.R. Pereira, R.B. Figueiredo, P.R. Cetlin and T.G. Langdon
Type: Article
| 2014
Modeling the temperature rise in high-pressure torsion - Pedro H.R. Pereira, Roberto B. Figueiredo, Yi Huang, Paulo R. Cetlin and Terence G. Langdon
Type: Article
| 2014
| Item not available on this server.
X-ray microbeam measurements of long range internal stresses in commercial purity aluminum processed by multiple passes of equal-channel angular pressing - Thien Q. Phan, I-Fang Lee, Lyle E. Levine, Jonathan Z. Tischler, Yi Huang, Alan G. Fox, Terence G. Langdon and Michael E. Kassner
Type: Article
| 2014
| Item not available on this server.
Type: Article
| 2014
High temperature behavior of nanolayered CrAlTiN coating: thermal stability, oxidation, and tribological properties - T. Polcar and A Cavaleiro
Type: Article
| 2014
| Item not available on this server.
Fatigue life and failure characteristics of an ultrafine-grained Ti-6Al-4V alloy processed by ECAP and extrusion - Alexander V. Polyakov, Irina P. Semenova, Yi Huang, Ruslan Z. Valiev and Terence G. Langdon
Type: Article
| 2014
| Item not available on this server.
Hardening mechanism of commercially pure Mg processed by high pressure torsion at room temperature - X.G. Qiao, Y.W. Zhao, W.M. Gan, Y. Chen, M.Y. Zheng, K. Wu, N. Gao and M.J. Starink
Type: Article
| 2014
Fabrication of ultrafine grained Al/Mg multilayered composite by high pressure torsion - Xiao Guang Qiao, Xing Yu Zhang, Ming Yi Zheng, Kun Wu, Nong Gao and Marco J. Starink
Type: Conference or Workshop Item
| 2014
| Item not available on this server.
Catalyzed SnO2 thin films: theoretical and experimental insights into fabrication and electrocatalytic properties - Annett Rabis, Denis Kramer, Emiliana Fabbri, Matthew Worsdale, Rüdiger Kötz and Thomas Schmidt
Type: Article
| 2014
| Item availability restricted.
Type: Dataset
| 2014
| University of Southampton
| Item not available on this server.
Assessment of the metrological performance of an in-situ storage image sensor ultra-high speed camera for full-field deformation measurements - M. Rossi, F. Pierron and P. Forquin
Type: Article
| 2014
| Item not available on this server.
A critical evaluation of the processing of an aluminum 7075 alloy using a combination of ECAP and HPT - Shima Sabbaghianrad and Terence G. Langdon
Type: Article
| 2014
| Item not available on this server.
An investigation of mechanical properties and microstructural evolution in an aluminum alloy processed by severe plastic deformation - Shima Sabbaghianrad and Terence G. Langdon
Type: Article
| 2014
| Item not available on this server.
An examination of the saturation microstructures achieved in ultrafine-grained metals processed by high-pressure torsion - Shima Sabbaghianrad, Jittraporn Wongsa-Ngam, Megumi Kawasaki and Terence G. Langdon
Type: Article
| 2014
X-ray tomography for structural analysis of microstructured and multimaterial optical fibers and preforms - S.R. Sandoghchi, G. Jasion, N.V. Wheeler, S. Jain, Z. Lian, J.P. Wooler, R.P. Boardman, N. Baddela, Y. Chen, J. Hayes, E. Numkam Fokoua, T. Bradley, D.R. Gray, S.M. Abokhamis Mousavi, M. Petrovich, F. Poletti and D.J. Richardson
Type: Article
| 2014
| Item not available on this server.
X-Ray tomography for structural analysis of microstructured optical fibres and preforms - S.R. Sandoghchi, G. Jasion, N.V. Wheeler, J.P. Wooler, R.P. Boardman, N. Baddela, Y. Chen, J. Hayes, E. Numkam Fokoua, T. Bradley, T. Gray, S.M. Abokhamis Mousavi, M. Petrovich, F. Poletti and D.J. Richardson
Type: Conference or Workshop Item
| 2014
Influence of voids on damage mechanisms in carbon/epoxy composites determined via high resolution computed tomography - Anna Scott, I. Sinclair, Simon Mark Spearing, Mark N. Mavrogordato and Warren Hepples
Type: Article
| 2014
| Item not available on this server.
Evolution of microstructure and hardness in NiTi shape memory alloys processed by high-pressure torsion - Hamed Shahmir, Mahmoud Nili-Ahmadabadi, Yi Huang and Terence G. Langdon
Type: Article
| 2014
| Item not available on this server.
Shape memory effect of NiTi alloy processed by equal-channel angular pressing followed by post deformation annealing - Hamed Shahmir, Mahmoud Nili-Ahmadabadi and Terence G. Langdon
Type: Article
| 2014
Evaluating a new core-sheath procedure for processing hard metals by equal-channel angular pressing - Hamed Shahmir, Mahmoud Nili-Ahmadabadi, Mojtaba Mansouri-Arani, Ali Khajezade and Terence G. Langdon
Type: Article
| 2014
| Item not available on this server.
Characteristics of a zirconia-spinel composite processed by a current-activated pressure-assisted densification method - Mahmood Shirooyeh, Javier E. Garay and Terence G. Langdon
Type: Book Section
| 2014
| John Wiley & Sons Ltd.
| Item not available on this server.
Microhardness evolution and mechanical characteristics of commercial purity titanium processed by high-pressure torsion - Mahmood Shirooyeh, Jie Xu and Terence G Langdon
Type: Article
| 2014
| Item not available on this server.
A new model for diffusion-controlled precipitation reactions using the extended volume concept - M.J. Starink
Type: Article
| 2014
Luneburg lens composed of sunflower-type graded photonic Crystals - Xiaohong Sun, Yulong Wu, wei Liu, yu Hao and Liudi Jiang
Type: Article
| 2014
| Item not available on this server.
Measuring forces between structural elements in composites: from macromolecules to bone - Philipp J. Thurner and Orestis Katsamenis
Type: Book Section
| 2014
| CRC Press
| Item not available on this server.
The role of nanoscale toughening mechanisms in osteoporosis - Philipp J. Thurner and Orestis L. Katsamenis
Type: Article
| 2014
| Item not available on this server.
Mechanical properties of ZK60 magnesium alloy processed by high-pressure torsion - Seyed A. Torbati-Sarraf and Terence G. Langdon
Type: Article
| 2014
| Item not available on this server.
Properties of a ZK60 magnesium alloy processed by high-pressure torsion - Seyed Alireza Torbati-Sarraf and Terence G. Langdon
Type: Article
| 2014
| Item not available on this server.
Report of International NanoSPD Steering Committee and statistics on recent NanoSPD activities - R.Z. Valiev and T.G. Langdon
Type: Article
| 2014
Sliding properties of Zr-DLC coatings: the effect of tribolayer formation - T Vitu, A Escudeiro, T. Polcar and A Cavaleiro
Type: Article
| 2014
| Item not available on this server.
Microstructural evolution in ultrafine-grained titanium processed by high-pressure torsion under different pressures - Chuan Ting Wang, Alan G. Fox and Terence G. Langdon
Type: Article
| 2014
| Item not available on this server.
An Investigation of hardness homogeneity and microstructure in pure titanium processed by high pressure torsion - Chuan Ting Wang and Terence G. Langdon
Type: Article
| 2014
| Item not available on this server.
Strain weakening and superplasticity in a Bi-Sn eutectic alloy processed by high-pressure torsion - Chuan Ting Wang and Terence G. Langdon
Type: Article
| 2014
Microstructure and texture evolution in ultrafine-grained pure Ti processed by equal-channel angular pressing with subsequent dynamic compression - L. Wang, Y.C. Wang, A.P. Zhilyaev, A.V. Korznikov, S.K. Li, E. Korznikova and T.G. Langdon
Type: Article
| 2014
| Item not available on this server.
Dynamic compressive behavior of ultrafine-grained pure Ti at elevated temperatures after processing by ECAP - Liu Wang, Yingchun Wang, Alexander P. Zhilyaev, Alexander V. Korznikov, Shukui Li, Elena Korznikova and Terence G. Langdon
Type: Article
| 2014
| Item not available on this server.
Modelling and evaluation of pulsed and pulse phase thermography through application of composite and metallic case studies - R. Waugh, J.M. Barton and S. Quinn
Type: Article
| 2014
Microstructural evolution and grain refinement in a Cu-Zr alloy processed by high-pressure torsion - Jittraporn Wongsa-Ngam and Terence G. Langdon
Type: Article
| 2014
| Item not available on this server.
Micro-tensile behavior at a high temperature in an AZ31 magnesium alloy processed by ECAP - J. Xu, B. Guo, D. Shan and T.G. Langdon
Type: Article
| 2014
| Item not available on this server.
Comparative study of impact and static indentation tests on particulate filled thermoplastic fluoropolymer coatings - Yanmeng Xu and Brian G. Mellor
Type: Article
| 2014
Martensitic phase transformation and deformation behavior of Fe-Mn-C-Al twinning-induced plasticity steel during high-pressure torsion - Kun Yan, Dhriti Bhattacharyya, Qi Lian, Saurabh Kabra, Megumi Kawasaki, David G. Carr, Mark D. Callaghan, Maxim Avdeev, Huijun Li, Yanbo Wang, Xiaozhou Liao, Terence G. Langdon, Klaus-Dieter Liss and Rian J. Dippenaar
Type: Article
| 2014
| Item not available on this server.
Microstructural evolution and microhardness variations in a Cu–36Zn–2Pb alloy processed by high-pressure torsion - Hong Yan Zhang, Chuan Ting Wang, Ying Chun Wang, Shu Kui Li, Hong Zou and Terence G. Langdon
Type: Article
| 2014
| Item not available on this server.
The significance of self-annealing in two-phase alloys processed by high-pressure torsion - Nian Xian Zhang, Megumi Kawasaki, Yi Huang and Terence G. Langdon
Type: Article
| 2014
Processing of commercial purity titanium by ECAP using a 90 degrees die at room temperature - Xicheng Zhao, Xirong Yang, Xiaoyan Liu, Chuan Ting Wang, Yi Huang and Terence G. Langdon
Type: Article
| 2014
| Item not available on this server.
Effect of annealing on wear resistance and electroconductivity of copper processed by high-pressure torsion - A.P. Zhilyaev, I. Shakhov, A. Belyakov, R. Kaibyshev and T.G. Langdon
Type: Article
| 2014
| Item not available on this server.
Long-term self-annealing of copper and aluminium processed by high-pressure torsion - Alexander P. Zhilyaev and Terence G. Langdon
Type: Article
| 2014
| Item not available on this server.
Reassessment of temperature increase and equivalent strain calculation during high-pressure torsion - Alexander P. Zhilyaev and Terence G. Langdon
Type: Article
| 2014
| Item not available on this server.
Electron backscatter diffraction (EBSD) microstructure evolution in HPT copper annealed at a low temperature - Alexander P. Zhilyaev, Semyon N. Sergeev and Terence G. Langdon
Type: Article
| 2014
| Item not available on this server.
Type: Thesis
| 2014
Amorphous SiC based non-volatile resistive memories with ultrahigh ON/OFF ratios - Le Zhong, P.A.S. Reed, Ruomeng Huang, C.H. de Groot and Liudi Jiang
Type: Article
| 2014
| Item not available on this server.
Resistive switching of Cu/SiC/Au memory devices with a high ON/OFF ratio - Le Zhong, P.A.S. Reed, Ruomeng Huang, C.H. de Groot and Liudi Jiang
Type: Article
| 2014
| Item not available on this server.