Items where Division is "Faculties (pre 2018 reorg) > Faculty of Engineering and the Environment (pre 2018 reorg) > Mechanical Engineering (pre 2018 reorg) > Engineering Mats & Surface Engineerg Gp (pre 2018 reorg)
Current Faculties > Faculty of Engineering and Physical Sciences > School of Engineering > Mechanical Engineering > Mechanical Engineering (pre 2018 reorg) > Engineering Mats & Surface Engineerg Gp (pre 2018 reorg)
Mechanical Engineering > Mechanical Engineering (pre 2018 reorg) > Engineering Mats & Surface Engineerg Gp (pre 2018 reorg)" and Year is 2007
 | Up a level |
Number of items: 144.
Microstructural modelling of fatigue in layered bearing architectures - Muhammad Sarfraz Ali
Type: Thesis
| 2007
Pulse phase thermography (PPT): potential characterisation technology for grossly sculpted surfaces - K.C. Ang, R.J. Wood, L. Wang, J.M. Dulieu-Barton, B.G. Dance and A. Buxton
Type: Conference or Workshop Item
| 2007
| Item not available on this server.
Type: Conference or Workshop Item
| 2007
| Item not available on this server.
Complex rough surface characterisation using a modified and calibrated optical laser triangulation system - K.C. Ang, R.J.K. Wood and L. Wang
Type: Conference or Workshop Item
| 2007
| Item not available on this server.
Metrology techniques for 3D complex surfaces produced by Surfi-Sculpt® Direct Writing process - K.C. Ang, R.J.K. Wood and L. Wang
Type: Conference or Workshop Item
| 2007
| Item not available on this server.
Type: Conference or Workshop Item
| 2007
| Item not available on this server.
Developing pulse phase thermography as a characterisation tool for grossly sculpted surfaces - K.C. Ang, R.J.K. Wood, L. Wang, J.M. Dulieu-Barton, B.G.I. Dance and A.L. Buxton
Type: Conference or Workshop Item
| 2007
| Item not available on this server.
Topographical characterization of electron beam sculpted surfaces by pulse phase thermography - K.C. Ang, R.J.K. Wood, L. Wang, J.M. Dulieu-Barton, B.G.I. Dance and A.L. Buxton
Type: Conference or Workshop Item
| 2007
| Item not available on this server.
Characterisation of fatigue crack growth and related damage mechanisms in FRP-metal hybrid laminates - T.P. Austin, M.M. Singh, P.J. Gregson and P.M. Powell
Type: Article
| 2007
| Item not available on this server.
General framework for the identification of elastic constitutive parameters from full-field measurements - S. Avril and F. Pierron
Type: Article
| 2007
| Item availability restricted.
Low-temperature synthesis of titanate nanotubes in aqueous KOH - Dmitry V. Bavykin, Barbara A. Cressey and Frank C. Walsh
Type: Article
| 2007
| Item not available on this server.
Effect of TiOSO4 hydrothermal hydrolysis conditions on TiO2 morphology and gas-phase oxidative activity - Dmitry V. Bavykin, Vera P. Dubovitskaya, Alexander V. Vorontsov and V.N. Parmon
Type: Article
| 2007
| Item not available on this server.
Kinetics of alkali metal ion exchange into nanotubular and nanofibrous titanates - Dmitry V. Bavykin and Frank C. Walsh
Type: Article
| 2007
| Item not available on this server.
Synergistic effects of micro-abrasion–corrosion of UNS S30403, S31603 and S32760 stainless steels - J.O. Bello, R.J.K. Wood and J.A. Wharton
Type: Article
| 2007
Micromagnetic modelling of ferromagnetic cones - Richard P. Boardman, Hans Fangohr, Matthew J. Fairman, Jürgen Zimmermann, Simon J. Cox, Alexander A. Zhukov and P.A.J. de Groot
Type: Article
| 2007
Analysis of local microstructure and hardness of 13mm gauge
2024-T351 AA friction stir welds - D.P.P. Booth, M.J. Starink and I. Sinclair
Type: Article
| 2007
Conducting polymer coatings in electrochemical technology Part 1 - Synthesis and fundamental aspects - S.A. Campbell, Y. Li, S. Breakspear, J.R. Smith and F.C. Walsh
Type: Article
| 2007
| Item not available on this server.
Sand erosion testing of novel compositions of hard ceramics - D.W. Celotta, U.A. Qureshi, E.V. Stepanov, D.P. Goulet, J. Hunter, C.H. Buckberry, R. Hill, S.V. Sherikar, M. Moshrefi-Torbati and R.J.K. Wood
Type: Article
| 2007
| Item not available on this server.
Natural products as antifoulants in marine surface coatings - L.D. Chambers, F.C. Walsh, R.J.K. Wood and K.R. Stokes
Type: Conference or Workshop Item
| 2007
| Item not available on this server.
Type: Conference or Workshop Item
| 2007
| Item not available on this server.
Protocols for printing thick film ceramic libraries using the London University Search Instrument (LUSI) - L.. Chen, Y. Zhang, S. Yang and J.R.G. Evans
Type: Article
| 2007
| Item not available on this server.
Characteristics of face-centred cubic metals processed by equal-channel angular pressing. - N.Q. Chinh, J. Gubicza and T.G. Langdon
Type: Article
| 2007
| Item not available on this server.
Interference effects observed in ultra-thin c-si solar cells: modeling and experiment - L. Danos, G. Jones, R. Greef and T. Markvart
Type: Conference or Workshop Item
| 2007
| Item not available on this server.
Adaptive numerical modelling of high temperature strength, creep and fatigue behaviour in Ni-based superalloys - I. Di Martino, J.W. Brooks, P.A.S. Reed, P. Holdway and A. Wisbey
Type: Article
| 2007
| Item availability restricted.
Characterization of frequency tuning using focused ion beam platinum deposition - Stefan Enderling, John Hedley, Liudi Jiang, Rebecca Cheung, Christian Zorman, Mehran Mehregany and Anthony J. Walton
Type: Article
| 2007
| Item not available on this server.
Determining the optimal mechanical requirements for early intervention devices in the knee - Sara Checa Esteban
Type: Thesis
| 2007
| Item availability restricted.
The processing of difficult-to-work alloys by ECAP with an emphasis on magnesium alloys. - R.B. Figueiredo, P.R. Cetlin and T.G. Langdon
Type: Article
| 2007
| Item not available on this server.
Achieving superplastic behaviour in F.C.C. and H.C.P. metals processed by ECAP - R.B. Figueiredo, M. Kawasaki, C. Xu and T.G. Langdon
Type: Article
| 2007
| Item not available on this server.
Influence of crystal orientation on the processing of copper single crystals by ECAP - P. Fukuda, M. Furukawa, K. Oh-ishi, Z. Horita and T.G. Langdon
Type: Article
| 2007
| Item not available on this server.
Superplastic deformation of a Mg-8% Li alloy processed at room temperature by ECAP - Mitsuaki Furui, Hirkoki Kitamura, Megumi Fukuta, Hiroshi Anada and Terence G. Langdon
Type: Book Section
| 2007
| Trans Tech Publications Ltd
| Item not available on this server.
Influence of preliminary extrusion conditions on the superplastic properies of a magnesium alloy processed by ECAP - Mitsuaki Furui, Hiroki Kitamura, Hiroshi Anada and Terence G. Langdon
Type: Article
| 2007
| Item not available on this server.
Application of equal-channel angular pressing to aluminum and copper single crystals - Minoru Furukawa, Zenji Horita and Terence G. Langdon
Type: Conference or Workshop Item
| 2007
| Trans Tech Publications Ltd
| Item not available on this server.
Microstructure and strength of severly deformed f.c.c. metals. - J. Gubicza, N.Q. Chinh, T. Csanádi, T.G. Langdon and T. Ungár
Type: Article
| 2007
| Item not available on this server.
Microstructural characteristics of pure gold processed by equal-channel angular processing. - J. Gubicza, N.Q. Chinh, P. Szommer, A. Vinogradov and T.G. Langdon
Type: Article
| 2007
| Item not available on this server.
Microstructure and mechanical behaviour of severely deformed f.c.c. metals - J. Gubicza, S. Dobatkin, Z. Bakai, N.Q. Chinh and T.G. Langdon
Type: Article
| 2007
| Item not available on this server.
The effect of severe plastic deformation on precipitation in supersaturated Al-Sn-Mg alloys. - J. Gubicza, I. Schiller, N.Q. Chinh, J. Illy, Z. Horita and T.G. Langdon
Type: Article
| 2007
| Item not available on this server.
Celtec-V: a polybenzimidazole-based membrane for the direct methanol fuel cell - Lorenz Gubler, Denis Kramer, Jörg Belack, Ömer Ünsal, Thomas J. Schmidt and Günther G. Scherer
Type: Article
| 2007
| Item not available on this server.
Real-time monitoring of wear debris using electrostatic sensing techniques - T.J. Harvey, S. Morris, L. Wang, R.J.K. Wood and H.E.G. Powrie
Type: Article
| 2007
| Item availability restricted.
Development of synergy model for erosion-corrosion of carbon steel in a slurry pot - T.J. Harvey, J.A. Wharton and R.J.K. Wood
Type: Article
| 2007
| Item availability restricted.
Electrostatic wear monitoring of rolling element bearings - T.J. Harvey, R.J.K. Wood and H.E.G. Powrie
Type: Article
| 2007
Grain refinement of high-purity FCC metals using ECAP - Z. Horita, K. Kishikawa, K. Kimura, K. Tatsumi and T.G. Langdon
Type: Article
| 2007
| Item not available on this server.
Microstructural evolution in the processing of bulk samples using high-pressure torsion - Z. Horita and T.G. Langdon
Type: Article
| 2007
| Item not available on this server.
Microstructural evolution in the processing of bulk samples using high-temperature torsion - Zenji Horita and Terence G. Langdon
Type: Conference or Workshop Item
| 2007
| Trans Tech Publications Ltd
| Item not available on this server.
The effect of the chemical, biological, and physical environment on quorum sensing in structured microbial communities - Alexander R. Horswill, Paul Stoodley, Philip S. Stewart and Matthew R. Parsek
Type: Article
| 2007
| Item not available on this server.
Type: Article
| 2007
| Item not available on this server.
A novel method for nanoprecision alignment in wafer bonding applications - Liudi Jiang, G. Pandraud, P.J. French, S.M. Spearing and M. Kraft
Type: Article
| 2007
| Item not available on this server.
Wafer bonding with nanoprecision alignment for micro/nano systems - Liudi Jiang, G. Pandraud, P.J. French, S.M. Spearing and M. Kraft
Type: Conference or Workshop Item
| 2007
| Item not available on this server.
A reassessment of materials issues in microelectromechanical systems (MEMS) - Liudi Jiang and S. Mark Spearing
Type: Article
| 2007
| Item not available on this server.
Thermoelastic stress analysis of sandwich structures with core junctions - M. Johannes, J.M. Dulieu-Barton, E. Bozhevolnaya and O.T. Thomsen
Type: Conference or Workshop Item
| 2007
| Item not available on this server.
Computational fluid dynamic modelling of water-cooling mechanism during thermal spraying process - Spyros Kamnis and Sai Gu
Type: Article
| 2007
| Item not available on this server.
Type: Article
| 2007
| Item not available on this server.
Extending creep and superplasticity to materials with submicrometer grain sizes. - M. Kawasaki, C. Xu, Z. Horita and T.G. Langdon
Type: Article
| 2007
| Item not available on this server.
Developing superplastic ductilities in ultrafine-grained metals - Megumi Kawasaki, Roberto B. Figueiredo, Cheng Xu and Terence G. Langdon
Type: Article
| 2007
| Item not available on this server.
Modelling of strengthening in Al-Cu-Mg alloys during isothermal and non-isothermal treatments - Imran Nasim Khan
Type: Thesis
| 2007
| Item availability restricted.
A procedure for producing reflective coatings on plates to be used for full-field slope measurements by a deflectometry technique - J.-H. Kim, F. Pierron, M. Grediac and M.R. Wisnom
Type: Article
| 2007
| Item not available on this server.
Identification of the local stiffness reduction of a damaged composite plate using the virtual fields method - J.-H. Kim, F. Pierron, M.R. Wisnom and K. Syed-Muhamad
Type: Article
| 2007
| Item not available on this server.
Influence of the hydrodynamic environment on quorum sensing in pseudomonas aeruginosa biofilms - Mary Jo Kirisits, Jeffrey J. Margolis, Boloroo L. Purevdorj-Gage, Benjamin Vaughan, David L. Chopp, Paul Stoodley and Matthew R. Parsek
Type: Article
| 2007
| Item not available on this server.
Photon collection efficiency of fluorescent
solar collectors - Pattareeya Kittidachachan, Lefteris Danos, Thomas J.J. Meyer, Nicholas Alderman and Tom Markvart
Type: Article
| 2007
Type: Article
| 2007
| Item not available on this server.
Fifty years of Harper-Dorn creep: a viable creep mechanism or a Californian artifact? - Praveen Kumar, Michael E. Kassner and Terence G. Langdon
Type: Article
| 2007
| Item not available on this server.
Cardiac fibroblasts influence cardiomyocyte phenotype in vitro - W.A. LaFramboise, D. Scalise, P. Stoodley, S.R. Graner, R.D. Guthrie, J.A. Magovern and M.J. Becich
Type: Article
| 2007
| Item not available on this server.
Type: Article
| 2007
| Item not available on this server.
The processing of ultrafine-grained materials through the application of severe plastic deformation - T.G. Langdon
Type: Article
| 2007
| Item not available on this server.
Ultrafine-grained materials: a personal perspective - T.G. Langdon
Type: Article
| 2007
| Item not available on this server.
Enhanced superplasticity in a magnesium alloy processed by equal-channel angular pressing with back-pressure - R. Lapovok, Y. Estrin, M.V. Popov and T.G. Langdon
Type: Article
| 2007
| Item not available on this server.
Directive millimetre-wave antenna based on freeformed woodpile EBG structure - Y. Lee, X. Lu, Y. Hao, S. Yang, R. Ubic, J. R. G. Evans and C. G. Parini
Type: Article
| 2007
| Item not available on this server.
Rapid prototyping of ceramic millimeterwave metamaterials: Simulations and experiments - Yoonjae Lee, Xuesong Lu, Yang Hao, Shoufeng Yang, Rich Ubic, Julian R.G. Evans and Clive G. Parini
Type: Article
| 2007
| Item not available on this server.
Type: Thesis
| 2007
| Item not available on this server.
Numerical simulation of the current, potential and concentration distributions along the cathode of a rotating cylinder Hull cell - C.T.J. Low, E.P.L. Roberts and F.C Walsh
Type: Article
| 2007
Dose uniformity of fine powders in ultrasonic microfeeding - Xuesong Lu, Shoufeng Yang and Julian R. G. Evans
Type: Article
| 2007
| Item not available on this server.
Diamond and diamond-like carbon MEMS - J.K. Luo, Y.Q. Fu, J.A. Williams, S.M. Spearing and W.I. Milne
Type: Article
| 2007
| Item not available on this server.
Genetic algorithms (GAs) based optimisation of FRP composite plated grillages in ship structures - K. Maneepan, R.A. Shenoi, J.I.R. Blake and H.K. Jeong
Type: Article
| 2007
| Item not available on this server.
Refined experimental methodology for assessing the heat dissipated in cyclically loaded materials at low stress levels - François Maquin and Fabrice Pierron
Type: Article
| 2007
| Item not available on this server.
Thermodynamics of losses in photovoltaic conversion - Tom Markvart
Type: Article
| 2007
The application of probablistic methods for the assessment of hip implant performance - Loujaine Mehrez
Type: Thesis
| 2007
| Item availability restricted.
Effect of environment on notch fatigue resistance of CMSX4 - M.D. Miller, P.A.S. Reed, M.R. Joyce, M.B. Henderson, J.W. Brooks, I. Wilcock and X. Wu
Type: Article
| 2007
| Item availability restricted.
Fatigue life prediction on nickel base superalloys - Mark Miller
Type: Thesis
| 2007
Fabrication and characterization of biodegradable poly(3-hydroxybutyrate) composite containing bioglass - S.K. Misra, S.N. Nazhat, S.P. Valappil, M. Moshrefi-Torbati, R.J.K. Wood, I. Roy and A.R. Boccaccini
Type: Article
| 2007
| Item not available on this server.
The mechanisms of long fatigue crack growth behaviour in Al–Si casting alloys at room and elevated temperature - A.J. Moffat, B.G. Mellor, I. Sinclair and P.A.S. Reed
Type: Article
| 2007
| Item not available on this server.
Micromechanistic analysis of fatigue in aluminium silicon casting alloys - Andrew James Moffat
Type: Thesis
| 2007
On the realization of microscopic grids for local strain measurement by direct interferometric photolithography - Raphaël Moulart, René Rotinat, Fabrice Pierron and Gilles Lerondel
Type: Article
| 2007
| Item not available on this server.
Insights into the genome of large sulfur bacteria revealed by analysis of single filaments - Marc Mussmann, Fen Z. Hu, Michael Richter, Dirk de Beer, André Preisler, Bo B. Jørgensen, Marcel Huntemann, Frank Oliver Glöckner, Rudolf Amann, Werner J.H. Koopman, Roger S. Lasken, Benjamin Janto, Justin Hogg, Paul Stoodley, Robert Boissy and Garth D. Ehrlich
Type: Article
| 2007
A finite element analysis of the superplastic forming of an aluminum alloy processed by ECAP - M.J. O'Brien, H.F. von Bremen, M. Furukawa, Z. Horita and T.G. Langdon
Type: Article
| 2007
| Item not available on this server.
Type: Article
| 2007
| Item not available on this server.
Microstructure effects on high temperature fatigue crack initiation and short crack growth in turbine disc nickel-base superalloy Udimet 720Li - H.T. Pang and P.A.S. Reed
Type: Article
| 2007
| Item not available on this server.
The influence of contaminants and their interactions of diesel engine oil tribology using electrostatic condition monitoring - Ramkumar Penchaliah
Type: Thesis
| 2007
| Item availability restricted.
Identification of the orthotropic elastic stiffnesses of composites with the virtual fields method: sensitivity study and experimental validation - F. Pierron, G. Vert, R. Burguete, S. Avril, R. Rotinat and M.R. Wisnom
Type: Article
| 2007
| Item not available on this server.
Full-field assessment of the damage process of laminated composite open-hole tensile specimens. Part I: methodology - Fabrice Pierron, Ben Green and Michael R. Wisnom
Type: Article
| 2007
| Item not available on this server.
Full-field assessment of the damage process of laminated composite open-hole tensile specimens. Part II: experimental results - Fabrice Pierron, Ben Green, Michael R. Wisnom and S.R. Hallett
Type: Article
| 2007
| Item not available on this server.
A direct borohydride – acid peroxide fuel cell - C.A. Ponce de Leon, F.C. Walsh, A. Rose, J.B. Lakeman, D.J. Browning and R.W. Reeve
Type: Article
| 2007
Strategies for the determination of the convective-diffusion limiting current from steady state linear sweep voltammetry - C. Ponce de León, C.T.J. Low, G. Kear and F.C. Walsh
Type: Article
| 2007
Characterization of the reaction environment in a filter-press redox flow reactor - C. Ponce-de-León, G.W. Reade, I. Whyte, S.E. Male and F.C. Walsh
Type: Article
| 2007
The role of biofilms in otolaryngologic infections: update 2007 - J. Christopher Post, N. Luisa Hiller, Laura Nistico, Paul Stoodley and Garth D. Ehrlich
Type: Article
| 2007
| Item not available on this server.
Mechanical properties of a 3C-SiC film between room temperature and 600 ?C - Michele Pozzi, Musaab Hassan, Alun J. Harris, Jim S. Burgess, Liudi Jiang, Kin K. Lee, Rebecca Cheung, Gordon J. Phelps, Nick G. Wright, Christian A. Zorman and Mehran Mehregany
Type: Article
| 2007
| Item not available on this server.
Materials selection and design of microelectrothermal bimaterial actuators - S. Prasanna and S.M. Spearing
Type: Article
| 2007
Manufacture and measurement of combinatorial libraries of dielectric ceramics - part I: physical characterisation of Ba1-xSrxTiO3 libraries - Robert C. Pullar, Yong Zhang, Lifeng Chen, Shoufeng Yang, Julian R. G. Evans and Neil McN. Alford
Type: Article
| 2007
| Item not available on this server.
Manufacture and measurement of combinatorial libraries of dielectric ceramics - part II. dielectric measurements of Ba1-xSrxTiO3 libraries - Robert C. Pullar, Yong Zhang, Lifeng Chen, Shoufeng Yang, Julian R. G. Evans, Peter Kr. Petrov, Andre N. Salak, Dmitry A. Kiselev, Andrei L. Kholkin, Victor M. Ferreira and Neil McN. Alford
Type: Article
| 2007
| Item not available on this server.
The role of FLO11 in saccharomyces cerevisiae biofilm development in a laboratory based flow-cell system - Boloroo Purevdorj-Gage, Miranda E. Orr, Paul Stoodley, Kathy B. Sheehan and Linda E. Hyman
Type: Article
| 2007
| Item not available on this server.
Multiple femur finite element analysis of the resurfaced femoral head - Ian Alexander James Radcliffe
Type: Thesis
| 2007
| Item availability restricted.
Bacterial biofilms, other structures seen as mainstream concepts - Christoph Schaudinn, Paul Stoodley, Aleksandra Kainovic, Teresa O’Keeffe, Bill Costerton, Douglas Robinson, Marc Baum, Garth Ehrlich and Paul Webster
Type: Article
| 2007
| Item not available on this server.
Effect of inert gas flow on hydrogen underpotential deposition measurements in polymer electrolyte fuel cells - I.A. Schneider, D. Kramer, A. Wokaun and G.G. Scherer
Type: Article
| 2007
| Item not available on this server.
Oscillations in gas channels. II. Unraveling the characteristics of the low frequency loop in air-fed PEFC impedance spectra - I.A. Schneider, D. Kramer, A. Wokaun and G.G. Scherer
Type: Article
| 2007
| Item not available on this server.
Oscillations in gas channels. Part I. The forgotten player in impedance spectroscopy in PEFCs - Ingo A. Schneider, Stefan Freunberger, Denis Kramer, Alexander Wokaun and Günther G. Scherer
Type: Article
| 2007
| Item not available on this server.
Crack initiation and growth in solder joints under cyclic shear deformation using piezomechanical actuation - D-J Shim, S.M. Spearing and Q. Yang
Type: Article
| 2007
| Item not available on this server.
Characterization of a potential superplasitc zirconia-spinel nanocomposite processed by spark plasma sintering - M. Shirooyeh, S. Tanju, J.E. Garay and T.G. Langdon
Type: Conference or Workshop Item
| 2007
| Wiley
| Item not available on this server.
Micromechanical aspects of
fatigue failure in conventional and carbon nanotube-reinforced acrylic bone cement - Polly Sinnett-Jones
Type: Thesis
| 2007
| Item availability restricted.
Modelling of precipitation hardening in alloys: effective analytical submodels for impingement and coarsening - M.J. Starink
Type: Conference or Workshop Item
| 2007
| Trans Tech Publications Ltd
| Item not available on this server.
An investigation into the cohesive properties of toughened two-part structural epoxy adhesives - Ian Stewart
Type: Thesis
| 2007
| Item availability restricted.
Effects of graphite nodules on crack growth behaviour of austempered ductile iron - B. Stokes, N. Gao and P.A.S. Reed
Type: Article
| 2007
The behaviour of small fatigue cracks, and some basic modelling approaches for the phenomenon. - Vaclav Strof
Type: Thesis
| 2007
| Item availability restricted.
Type: Thesis
| 2007
| Item availability restricted.
Exposure effects of alkaline drilling fluid on the microscale abrasion–corrosion of WC-based hardmetals - M.R. Thakare, J.A. Wharton, R.J.K. Wood and C. Menger
Type: Article
| 2007
| Item availability restricted.
Electrochemically deposited polypyrrole films and their characterization - J. Tietje-Girault, C.A. Ponce de León and F.C Walsh
Type: Article
| 2007
| Item not available on this server.
Highly selective Pd/titanate nanotube catalysts for the double-bond migration reaction - Laura Torrente-Murciano, Alexei A. Lapkin, Dmitry V. Bavykin, Frank C. Walsh and Karen Wilson
Type: Article
| 2007
| Item not available on this server.
A model of fluid-biofilm interaction using a burger material law - Brett W. Towler, Al Cunningham, Paul Stoodley and Ladean McKittrick
Type: Article
| 2007
| Item not available on this server.
Microdiffraction to detemine grain sizes at selected postitions in disks precessed by high-pressure torsion - Tamás Ungár, Levente Belogh, Yuntian T. Zhu, Zenji Horita, Cheng Xu and Terence G Langdon
Type: Article
| 2007
| Item not available on this server.
The innovation potential of bulk nanostructured materials - R.Z. Valiev, M.J. Zehetbauer, Y. Estrin, H-W. Höppel, Y. Ivanisenko, H. Hahn, G. Wilde, H.J. Roven, X. Sauvage and T.G. Langdon
Type: Article
| 2007
| Item not available on this server.
The influence of contact conditions on surface reaction layers formed between steel surfaces lubricated by an aviation oil - L. Wang and R.J.K. Wood
Type: Article
| 2007
Electrostatic charge – a novel condition monitoring technology - L. Wang, R.J.K. Wood, T.J. Harvey and H.E.G. Powrie
Type: Article
| 2007
| Item not available on this server.
Type: Article
| 2007
Type: Article
| 2007
Grain deformation and texture rotations during one pass of ECA pressing of a high strength Al based alloy - S.C. Wang, M.J. Starink, N. Gao, X. Qiao, C. Xu and T.G. Langdon
Type: Conference or Workshop Item
| 2007
| Item not available on this server.
Identification of transformed grain boundaries and reconstruction of the prior grains from EBSD data in pure Ti and ?-Ti alloys - S.C. Wang, M.J. Starink and H.S. Ubhi
Type: Conference or Workshop Item
| 2007
| Item not available on this server.
Analysis of nickel-aluminium bronze crevice solution chemistry using capillary electrophoresis - J.A. Wharton and K.R. Stokes
Type: Article
| 2007
| Item not available on this server.
Tribo-corrosion of coatings: a review - R.J.K. Wood
Type: Article
| 2007
Type: Article
| 2007
| Item not available on this server.
Novel experimental approach for longitudinal-radial stiffness characterisation of clear wood by a single test - José Xavier, Stéphane Avril, Fabrice Pierron and José Morais
Type: Article
| 2007
| Item not available on this server.
Principles of grain refinement in processing by ECAP - C. Xu, M. Furukawa, Z. Horita and T.G. Langdon
Type: Conference or Workshop Item
| 2007
| Minerals, Metals and Materials Society
| Item not available on this server.
The processing of ultrafine-grained materials using high-pressure torsion - C. Xu, Z. Horita and T.G. Langdon
Type: Article
| 2007
| Item not available on this server.
Mechanical properties of a spray-cast aluminum alloy processed by severe plastic deformation - C. Xu, M. Kawasaki, M. Furukawa, Z. Horita and T.G Langdon
Type: Article
| 2007
| Item not available on this server.
The development of hardness homogeneity in aluminum and an aluminum alloy processed by ECAP - C. Xu and T.G. Langdon
Type: Article
| 2007
| Item not available on this server.
The role of back-pressure in the processing of pure aluminum by ECAP. - C. Xu, K. Xia and T.G. Langdon
Type: Article
| 2007
| Item not available on this server.
The evolution of homogeneity in processing by high-pressure torsion - Cheng Xu, Zenji Horita and Terence G. Langdon
Type: Article
| 2007
| Item not available on this server.
Mechanical properties of a spray-cast aluminum alloy processed by severe plastic deformation - Cheng Xu, Megumi Kawasaki, Minoru Furukawa, Zenji Horita and Terence G. Langdon
Type: Conference or Workshop Item
| 2007
| Trans Tech Publications Ltd
| Item not available on this server.
Electrodeposition of mesoporous manganese dioxide supercapacitor
electrodes through self-assembled triblock copolymer templates - Tong Xue, Cai-Ling Xu, Dan-Dan Zhao, Xiao-Hong Li and Hu-Lin Li
Type: Article
| 2007
| Item not available on this server.
Metering and dispensing of powder; the quest for new solid freeforming techniques - S. Yang and J. R. G. Evans
Type: Article
| 2007
| Item not available on this server.
Effect of total knee replacement design and surgical technique
on patello-femoral joint performance: an explicit finite element study - Kwok Tai Cathay Yeung
Type: Thesis
| 2007
| Item availability restricted.
Thick film ceramic combinatorial libraries: the substrate problem - Yong Zhan, Lifeng Chen, Shoufeng Yang and Julian R.G. Evans
Type: Article
| 2007
| Item not available on this server.
Control of particle segregation during drying of ceramic suspension droplets - Y. Zhang, L. Chen, S. Yang and J.R.G. Evans
Type: Article
| 2007
| Item not available on this server.
Determining the optimal stacking fault energy for achieving high ductility in ultrfine-grained Cu-Zn alloys - Y.H. Zhao, X.Z. Liao, Z. Horita, T.G. Langdon and Y.T. Zhu
Type: Article
| 2007
| Item not available on this server.
Influence of stacking fault energy on the minimum grain size achiieved in severe plastic deformation. - Y.H. Zhao, Y.T. Zhu, X.Z. Liao, Z. Horita and T.G. Langdon
Type: Article
| 2007
| Item not available on this server.
Particle and grain growth in an Al-Si alloy during high-pressure torsion - A.P. Zhilyaev, J.M. Garcia-Infanta, F. Carreño,, T.G. Langdon and O.A. Ruano
Type: Article
| 2007
| Item not available on this server.
Evolution of microsturcture and mircrotexture in fcc metals during high-pressure torsion - A.P. Zhilyaev, T.R. McNelly and T.G. Langdon
Type: Article
| 2007
| Item not available on this server.
Geometrical multilayers: coercivity in magnetic 3-D nanostructures - P.A.J. de Groot, A.A. Zhukov, R. Boardman, G. Bordignon, H. Fangohr and P.N. Bartlett
Type: Article
| 2007