Items where Division is "Faculties (pre 2018 reorg) > Faculty of Engineering and the Environment (pre 2018 reorg) > Mechanical Engineering (pre 2018 reorg) > Engineering Mats & Surface Engineerg Gp (pre 2018 reorg)
Current Faculties > Faculty of Engineering and Physical Sciences > School of Engineering > Mechanical Engineering > Mechanical Engineering (pre 2018 reorg) > Engineering Mats & Surface Engineerg Gp (pre 2018 reorg)
Mechanical Engineering > Mechanical Engineering (pre 2018 reorg) > Engineering Mats & Surface Engineerg Gp (pre 2018 reorg)" and Year is 2009
 | Up a level |
Number of items: 130.
Comparison of fatigue performance of HVOF spray coated and conventional roll bonded aluminium bearing alloys - M.S. Ali, P.A.S. Reed and S. Syngellakis
Type: Article
| 2009
Addressing the optical reflection issues in complex rough surfaces - K.C. Ang, R.J.K. Wood and L. Wang
Type: Conference or Workshop Item
| 2009
| Rzeszow University of Technology
| Item not available on this server.
Type: Conference or Workshop Item
| 2009
| Item not available on this server.
Assessment of complex rough surfaces for surface texturing and tribological applications - K.C. Ang, R.J.K. Wood and L. Wang
Type: Conference or Workshop Item
| 2009
| Item not available on this server.
Advanced optical laser triangulation assessment for tribological surfaces - K.C. Ang, R.J.W. Wood and L. Wang
Type: Conference or Workshop Item
| 2009
| Item not available on this server.
Comparison of two approaches for differentiating full-field data in solid mechanics - Stéphane Avril, Pierre Feissel, Fabrice Pierron and Pierre Villon
Type: Article
| 2009
| Item not available on this server.
Type: Article
| 2009
| Item not available on this server.
Wireline wear resistance of filled and unfilled polymeric coatings for downhole applications - J.O. Bello and R.J.K. Wood
Type: Article
| 2009
| Item not available on this server.
The application of reliability methods in the design of stiffened FRP composite panels for marine vessels - J.I.R. Blake, R.A. Shenoi, P. Das and N. Yang
Type: Article
| 2009
| Item not available on this server.
Type: Conference or Workshop Item
| 2009
| Item not available on this server.
Fatigue performance of sandwich beams with peel stoppers - E. Bozhevolnaya, J. Jakobsen and O.T. Thomsen
Type: Article
| 2009
| Item not available on this server.
A numerical study of crack shielding and deflection under extensive plasticity - Allan Burke-Veliz, Philippa A.S. Reed and Stavros Syngellakis
Type: Article
| 2009
Power flow analysis for a floating sandwich raft isolation system using a higher-order theory - W.J. Choi, Y.P. Xiong and R.A. Shenoi
Type: Article
| 2009
A novel flow battery: A lead acid battery based on an electrolyte with soluble lead(II). Part IX: Electrode and electrolyte conditioning with hydrogen peroxide - John Collins, Xiaohong Li, Derek Pletcher, Ravichandra Tangirala, Duncan Stratton-Campbell, Frank C Walsh and Caiping Zhang
Type: Article
| 2009
Identification of shear bands in wrought magnesium alloy friction stir welds and laser beam welds - L. Commin, R. Rotinat, F. Pierron, J.-E. Masse and L. Barrallier
Type: Article
| 2009
| Item not available on this server.
Advanced condition monitoring of tapered roller bearings, part1 - M. Craig, T. J. Harvey, R. J. K. Wood, K. Masuda, M. Kawabata and H. E. G. Powrie
Type: Article
| 2009
| Item availability restricted.
Efficient light harvesting with LB films for application in crystalline silicon solar cells - L Danos and T Markvart
Type: Conference or Workshop Item
| 2009
| Materials Research Society
| Item not available on this server.
Force-induced activation of covalent bonds in mechanoresponsive polymeric materials - Douglas A. Davis, Andrew Hamilton, Jinglei Yang, Lee D. Cremar, Dara Van Gough, Stephanie L. Potisek, Mitchell T. Ong, Paul V. Braun, Todd J. Martínez, Scott R. White, Jeffrey S. Moore and Nancy R. Sottos
Type: Letter
| 2009
| Item not available on this server.
Single-walled carbon nanotube/trititanate nanotube composite fibers - Chonlada Dechakiatkrai, Carol Lynam, Kerry J. Gilmore, Jun Chen, Sukon Phanichphant, Dmitry V. Bavykin, Frank C. Walsh and Gordon G. Wallace
Type: Article
| 2009
| Item availability restricted.
Probabilistic finite element analysis of the uncemented total hip replacement - Carolina Dopico Gonzalez
Type: Thesis
| 2009
The significance of slippage in processing by high-pressure torsion - Kaveh Edalati, Zenji Horita and Terence G. Langdon
Type: Article
| 2009
| Item not available on this server.
Type: Article
| 2009
| Item not available on this server.
A micro-mechanistic approach to lifing of thermal barrier coatings for gas turbine blades - Stewart Everitt
Type: Book Section
| 2009
| University of Southampton
Evolution of texture in a magnesium alloy processed by ECAP through dies with different angles - Roberto B. Figueiredo, Irene J. Beyerlein, Alexander P. Zhilyaev and Terence G. Langdon
Type: Article
| 2009
| Item not available on this server.
The evolution of damage in perfect-plastic and strain hardening materials processed by equal-channel angular pressing - Roberto B. Figueiredo, Paulo R. Cetlin and Terence G. Langdon
Type: Article
| 2009
| Item not available on this server.
Stable and unstable flow in materials processed by equal-channel angular pressing with an emphasis on magnesium alloys - Roberto B. Figueiredo, Paulo R. Cetlin and Terence G. Langdon
Type: Article
| 2009
| Item not available on this server.
Factors influencing ductility in ultrafine-grained metals processed by equal-channel angular pressing - Roberto B. Figueiredo, Zhi Chao Duan, Megumi Kawasaki and Terence G. Langdon
Type: Article
| 2009
| Item not available on this server.
The mechanical properties of ultrafine-grained metals at elevated temperatures - Roberto B. Figueiredo, Megumi Kawasaki and Terence G. Langdon
Type: Article
| 2009
| Item not available on this server.
Achieving microstructural refinement in magnesium alloys through severe plastic deformation - Roberto B. Figueiredo and Terence G. Langdon
Type: Article
| 2009
| Item not available on this server.
The characteristics of superplastic flow in a magnesium alloy processed by ECAP - Roberto B. Figueiredo and Terence G. Langdon
Type: Article
| 2009
| Item not available on this server.
Factors influencing superplastic behavior in a magnesium ZK60 Alloy processed by equal-channel angular pressing - Roberto B. Figueiredo and Terence G. Langdon
Type: Article
| 2009
| Item not available on this server.
The nature of grain refinement in equal-channel angular pressing: a comparison of fcc and hcp metals - Roberto B. Figueiredo and Terence G. Langdon
Type: Article
| 2009
| Item not available on this server.
Principles of grain refinement and superplastic flow in magnesium alloys processed by ECAP - Roberto B. Figueiredo and Terence G. Langdon
Type: Article
| 2009
| Item not available on this server.
Principles of grain refinement in magnesium alloys processed by equal-channel angular pressing - Roberto B. Figueiredo and Terence G. Langdon
Type: Article
| 2009
| Item not available on this server.
Strategies for achieving high strain rate superplasticity in magnesium alloys processed by equal-channel angular pressing - Roberto B. Figueiredo and Terence G. Langdon
Type: Article
| 2009
| Item not available on this server.
Using severe plastic deformation for the processing of advanced engineering materials - Roberto B. Figueiredo and Terence G. Langdon
Type: Article
| 2009
| Item not available on this server.
On the free vibration of sandwich panels with a transversely flexible and temperature dependent core material – part II: numerical study - Y. Frostig and O.T. Thomsen
Type: Article
| 2009
| Item not available on this server.
Stress and damage assessment in woven composite materials by means of thermoelastic stress analysis - Richard Konrad Fruhmann
Type: Thesis
| 2009
Principles of deformation in single crystals of two different orientations processed by equal-channel angular pressing - Minoru Furukawa, Zenji Horita and Terence G. Langdon
Type: Article
| 2009
| Item not available on this server.
Using differential scanning calorimetry as an analytical tool
for ultrafine-grained metals processed by severe plastic deformation - Nong Gao, Marco J. Starink and Terence G. Langdon
Type: Article
| 2009
Correlation between microstructure and mechanical properties of severely deformed metals - J. Gubicza, N.Q. Chinh, J.L. Lábár, S. Dobatkin, Z. Hegedüs and T.G. Langdon
Type: Article
| 2009
| Item not available on this server.
Letter. Twinning and dislocation activity in silver processed by severe plastic deformation. [In special issue: Syntactic and Composite Foams] - Jeno Gubicza, N.Q. Chinh, J.L. Lábár, Z. Hegedüs and T.G. Langdon
Type: Article
| 2009
| Item not available on this server.
Stability of microstructure in silver processed by severe plastic deformation - Jeno Gubicza, Nguyen Q. Chinh, János L. Lábár, Geza Tichy, Zoltán Hegedüs, Cheng Xu and Terence G. Langdon
Type: Article
| 2009
| Item not available on this server.
Preparation and performance of a novel multifunctional plasma electrolytic oxidation composite coating formed on magnesium alloy - J. Guo, L.P. Wang, S.C. Wang, J. Liang, Q.J. Xue and F.Y. Yan
Type: Article
| 2009
| Item not available on this server.
Using ring samples to evaluate the processing characteristics in high-pressure torsion - Yosuke Harai, Kaveh Edalati, Zenji Horita and Terence G. Langdon
Type: Article
| 2009
| Item not available on this server.
Oxidation of the borohydride Ion at silver nanoparticles on a glassy carbon electrode (GCE) using pulsed potential techniques - V.A Hernández-Ramírez, A Alatorre-Ordaz, M.L. Yepez-Murrieta, J.G. Ibanez, C. Ponce de Leon and F.C Walsh
Type: Article
| 2009
Surface potential effects on friction and abrasion of sliding contacts lubricated by aqueous solutions - M.N.F Ismail, T.J Harvey, J.A Wharton, R.J.K Wood and A Humprheys
Type: Article
| 2009
| Item availability restricted.
Crack deflection by core junctions in sandwich structures - J. Jakobsen, J.H. Andreasen and O.T. Thomsen
Type: Article
| 2009
| Item not available on this server.
Crack deflection analyses of different peel stopper designs for sandwich structures - J. Jakobsen, O.T. Thomsen, J.H. Andreasen and E. Bozhevolnaya
Type: Article
| 2009
| Item not available on this server.
Type: Article
| 2009
Interaction of fullerenes C60 with large unilamellar vesicles - Orestis L. Katsamenis, Nikolaos Bouropoulos and Dimitrios G. Fatouros
Type: Article
| 2009
| Item availability restricted.
Microstructural evolution in high purity aluminum processed by ECAP - Megumi Kawasaki, Zenji Horita and Terence G. Langdon
Type: Article
| 2009
| Item not available on this server.
Flow behavior of a superplastic Zn–22% Al alloy processed by equal-channel angular pressing - Megumi Kawasaki and Terence G. Langdon
Type: Article
| 2009
| Item not available on this server.
Constructing a deformation mechanism map for a superplastic
Pb-Sn alloy processed by equal-channel angular pressing - Megumi Kawasaki, Sangmok Lee and Terence G. Langdon
Type: Article
| 2009
| Item not available on this server.
Local stiffness reduction in impacted composite plates from full-field measurements - J.-H. Kim, F. Pierron, M.R. Wisnom and S. Avril
Type: Article
| 2009
| Item not available on this server.
Type: Article
| 2009
| Item not available on this server.
A novel image analysis procedure for measuring fibre misalignment in unidirectional fibre composites - K.K. Kratmann, MP.F. Sutcliffe, L.T. Lilleheden, R. Pyrz and O.T. Thomsen
Type: Article
| 2009
| Item not available on this server.
Multiscale mechanics modeling of direct silicon wafer bonding - Dhirendra Kubair, Daniel J. Cole, Lucio C. Ciacci and Simon Mark Spearing
Type: Article
| 2009
| Item not available on this server.
Experimental validation of modal strain energies based damage identification method for a composite sandwich beam - Manoj Kumar, R.A. Shenoi and S.J. Cox
Type: Article
| 2009
| Item not available on this server.
New observations on high temperature creep at very low stresses - Praveen Kumar, Michael E. Kassner, Wolfgang Blum, Philip Eisenlohr and Terence G. Langdon
Type: Article
| 2009
| Item not available on this server.
Influence of strain rate on strength and ductility in an aluminum alloy processed by equal-channel angular pressing - Praveen Kumar, Cheng Xu and Terence G. Langdon
Type: Article
| 2009
| Item not available on this server.
Superplasticity of bulk nanostructured materials - T.G. Langdon
Type: Book Section
| 2009
| Wiley-VCH Verlag
| Item not available on this server.
Research on bulk nanostructured materials in Ufa: twenty years of scientific achievements - Terence G. Langdon
Type: Article
| 2009
| Item not available on this server.
Seventy-five years of superplasiticity: historic developments and new opportunities - Terence G. Langdon
Type: Article
| 2009
| Item not available on this server.
Cylindrical EBG antenna for short range gigabit wireless communications at millimetre-wave bands - Y. Lee, X. Lu, Y. Hao, S. Yang, C. G. Parini and J. R. G. Evans
Type: Article
| 2009
| Item not available on this server.
Low-profile directive millimeter-wave antennas using free-formed three-dimensional (3-D) electromagnetic bandgap structures - Yoonjae Lee, Xuesong Lu, Yang Hao, Shoufeng Yang, J. Evans and C.G. Parini
Type: Article
| 2009
| Item not available on this server.
Dynamic testing at high strain rates of an ultrafine-grained magnesium alloy processed by ECAP - B. Li, S. Joshi, K. Azevedo, E. Ma, K.T. Ramesh, R.B. Figueiredo and T.G. Langdon
Type: Article
| 2009
| Item not available on this server.
High density p-type Bi0.5Sb1.5Te3 nanowires by electrochemical templating through ion-track lithography - Xiaohong Li, Elena Koukharenko, Iris S. Nandhakumar, John Tudor, Steve P. Beeby and Neil M. White
Type: Article
| 2009
A novel flow battery: a lead acid battery based on an electrolyte
with soluble lead(II): Part VII. Further studies of the lead dioxide positive electrode - Xiaohong Li, Derek Pletcher and Frank C. Walsh
Type: Article
| 2009
| Item availability restricted.
Extrusion freeforming of millimeter wave electromagnetic bandgap (EBG) structures - Xuesong Lu, Yoonjae Lee, Shoufeng Yang, Yang Hao, Julian Evans and Clive Parini
Type: Article
| 2009
| Item not available on this server.
Fine lattice structures fabricated by extrusion freeforming: process variables - Xuesong Lu, Yoonjae Lee, Shoufeng Yang, Yang Hao, Julian R. G. Evans and Clive G. Parini
Type: Article
| 2009
| Item not available on this server.
Fabrication and evaluation of solid freeformed electromagnetic bandgap structures - Xuesong Lu, Yoonjae Lee, Shoufeng Yang, Yang Hao, Julian R.G. Evans and Clive G. Parini
Type: Article
| 2009
| Item not available on this server.
Extrusion freeforming of millimeter-wave electromagnetic bandgap(EBG)photonic crystals - Xuesong Lu, Yoonjae Lee, Shoufeng Yang, Yang Hao, Julian RG Evans and Clive G Parini
Type: Article
| 2009
| Item not available on this server.
Fabrication of millimeter-wave electromagnetic bandgap crystals using microwave dielectric powders - Xuesong Lu, Yoonjae Lee, Shoufeng Yang, Yang Hao, Rick Ubic, Julian R. G. Evans and Clive G. Parini
Type: Article
| 2009
| Item not available on this server.
Microfeeding with different ultrasonic nozzle designs - Xuesong Lu, Shoufeng Yang and Julian R. G. Evans
Type: Article
| 2009
| Item not available on this server.
Electrochemical study of Co(II)/Co(III) on different electrode materials
for energy storage in redox flow cells - Salvador A López-Estrada, Alejandro Alatorre-Ordaz, Silvia Gutiérrez-Granados, Carlos Ponce de Leon and Franck C. Walsh
Type: Article
| 2009
| Item availability restricted.
Heat dissipation measurements in low stress cyclic loading of metallic materials: from internal friction to micro-plasticity - F. Maquin and F. Pierron
Type: Article
| 2009
| Item not available on this server.
Type: Thesis
| 2009
Counting sunrays: from optics to the thermodynamics of light - Tom Markvart
Type: Book Section
| 2009
| Nova Science Publishers
Type: Conference or Workshop Item
| 2009
| Item not available on this server.
Acoustic emission monitoring and 3-D visualisation of polymerisation induced damage of acrylic polymer materials. - M. Mavrogordato, M. Taylor, A. Taylor and M. Browne
Type: Article
| 2009
| Item not available on this server.
Type: Article
| 2009
Type: Conference or Workshop Item
| 2009
| Item not available on this server.
Experimental and computational analysis of toughness
anisotropy in an AA2139 Al-alloy for aerospace applications - T.F. Morgeneyer, J. Besson, H. Proudhon, M.J. Starink and I. Sinclair
Type: Conference or Workshop Item
| 2009
| International Conference on Fracture, NRCC, Ottawa
| Item not available on this server.
Experimental and numerical analysis of toughness anisotropy in AA2139 Al-alloy sheet - T.F. Morgeneyer, J. Besson, H. Proudhon, M.J. Starink and I. Sinclair
Type: Article
| 2009
| Item availability restricted.
Full-field evaluation of the onset of microplasticity in a steel specimen - Raphaël Moulart, René Rotinat and Fabrice Pierron
Type: Article
| 2009
| Item not available on this server.
Analysis of the propulsion and manoeuvring characteristics of survey-style AUVs and the development of a multi-purpose AUV - Alistair Robin Palmer
Type: Thesis
| 2009
Microstructure variation effects on room temperature fatigue crack propagation and thresholds in Udimet 720Li Ni-base alloy - H.T. Pang and P.A.S. Reed
Type: Article
| 2009
A novel method for measuring the through-thickness shear moduli of anisotropic plates from surface deformation measurements - Fabrice Pierron
Type: Article
| 2009
| Item not available on this server.
Type: Book Section
| 2009
| Elsevier
| Item availability restricted.
Type: Book Section
| 2009
| Elsevier
| Item availability restricted.
Recent developments in borohydride fuel cell cells - Carlos Ponce de Leon, Frank C. Walsh, Russell R Bessette, Charles J. Patrissi, Maria G. Medeiros, Abigail Rose, Darren Browning, John B Lakeman and Robert W. Reeve
Type: Article
| 2009
| Item not available on this server.
Dielectric measurements on a novel Ba1 - xCaxTiO3 (BCT) bulk ceramic combinatorial library - Robert C. Pullar, Yong Zhang, Lifeng Chen, Shoufeng Yang, Julian R.G. Evans, Andrei N. Salak, Dmitry A. Kiselev, Andrei L. Kholkin, Victor M. Ferreira and Neil McN. Alford
Type: Article
| 2009
| Item not available on this server.
Hardness inhomogeneity and local strengthening mechanisms of an Al1050 aluminium alloy after 1 pass of equal channel angular pressing - Xiaoguang Qiao, M.J. Starink and Nong Gao
Type: Article
| 2009
Erosion-corrosion resistance of engineering materials in various test conditions - S.S Rajahram, T.J. Harvey and R.J.K. Wood
Type: Article
| 2009
Evaluation of a semi-empirical model in predicting erosion–corrosion - S.S Rajahram, T.J. Harvey and R.J.K. Wood
Type: Article
| 2009
| Item not available on this server.
Type: Article
| 2009
| Item availability restricted.
Advanced micromechanical analysis of highly loaded hybrid composite structures - A.E. Scott, M. Clinch, W. Hepples, N. Kalantzis, I. Sinclair and S.M. Spearing
Type: Conference or Workshop Item
| 2009
| Item not available on this server.
Influence of equal-channel angular pressing on pPrecipitation kinetics in an Al-Zn-Mg-Cu alloy - G. Sha, Y.B. Wang, X.Z. Liao, Z.C. Duan, S.P. Ringer and T.G. Langdon
Type: Article
| 2009
| Item not available on this server.
An atom probe characterization of grain boundaries in an aluminium alloy processed by equal-channel angular pressing - Gang Sha, Simon P. Ringer, Zhi Chao Duan and Terence G. Langdon
Type: Article
| 2009
| Item not available on this server.
The deposition of nanostructured ?-PbO2 coatings from aqueous methanesulfonic acid for the electrochemical oxidation of organic pollutants - I. Sirés, C.T.J. Low, C. Ponce de Leon and F.C. Walsh
Type: Article
| 2009
| Item availability restricted.
Optimisation approaches to design synthesis of marine composite structures - A. Sobey, J.I.R. Blake and R.A. Shenoi
Type: Article
| 2009
| Item not available on this server.
Material selection for optimal design of thermally actuated pneumatic and phase change microactuators - Prasanna Srinivasan and Simon M Spearing
Type: Article
| 2009
| Item not available on this server.
The thermodynamics of and strengthening due to co-clusters: general theory for application in modelling software - M.J. Starink
Type: Conference or Workshop Item
| 2009
| Item not available on this server.
Predicting grain refinement by cold severe plastic deformation in alloys using volume average dislocation generation - M.J. Starink, X.G. Qiao, J. Zhang and N. Gao
Type: Article
| 2009
The thermodynamics of and strengthening due to co-clusters: general theory and application to the case of Al-Cu-Mg alloys - M.J. Starink and S.C. Wang
Type: Article
| 2009
Enhanced pre-clinical assessment of total knee replacement using computational modelling with experimental corroboration & probabilistic applications - Anthony Michael Strickland
Type: Thesis
| 2009
Type: Thesis
| 2009
Effect of stacking fault energy on strength and ductility of nanostructured alloys: an evaluation with minimum solution hardening - P-L. Sun, Y.H. Zhao, J.C. Cooley, M.E. Kassner, Z. Horita, T.G. Langdon, E.J Lavernia and Y.T. Zhu
Type: Article
| 2009
| Item not available on this server.
Investigation of micro-scale abrasion-corrosion of WC-based sintered hardmetal and sprayed coating using in situ electrochemical current-noise measurements - M.R. Thakare, J.A. Wharton, R.J.W. Wood and C. Menger
Type: Article
| 2009
| Item not available on this server.
Development of a reusuable atomic oxygen sensor using oxide thick films - Juan Carlos Valer
Type: Thesis
| 2009
Processing by severe plastic deformation: an ancient skill adapted for the modern world. - Ruslan Z. Valiev, Kenong Xia and Terence G. Langdon
Type: Article
| 2009
| Item not available on this server.
Prediction of mass transport profiles in a laboratory filter-press electrolyser by
computational fluid dynamics modelling - L. Vázquez, A Alvarez-Gallegos, F.Z Sierra, C. Ponce de León and F.C Walsh
Type: Article
| 2009
| Item availability restricted.
Simulation of velocity profiles in a laboratory electrolyser using computational fluid dynamics - L. Vázquez, A. Alvarez-Gallegos, F.Z. Sierra, C. Ponce de León and F.C Walsh
Type: Article
| 2009
| Item availability restricted.
Power struggle: tribology's role in energy saving - J.C. Walker
Type: Article
| 2009
Investigating high strain rate behaviour of unidirectional composites by a visco-elastic model - W. Wang and R.A. Shenoi
Type: Article
| 2009
| Item not available on this server.
Influence of stacking fault energy on deformation mechanism and dislocation storage capacity in ultrafine-grained materials - Z.W. Wang, Y.B. Wang, X.Z. Liao, Y.H. Zhao, Y.T. Lavernia, Y.T. Zhu, Z. Horita and T.G Langdon
Type: Article
| 2009
| Item not available on this server.
Synthesis and characterization of doped nano-sized ceria-zirconia solid solutions - Xiaole Weng, Ben Perston, Xue Z. Wang, Isaac Abrahams, Tian Lin, Shoufeng Yang, Julian R. G. Evans, David J. Morgan, Albert F. Carley, Michael Bowker, Jonathan C. Knowles, Ihtesham Rehman and Jawwad A. Darr
Type: Article
| 2009
| Item not available on this server.
Type: Article
| 2009
| Item availability restricted.
Tribology of thermal sprayed WC-Co coatings [In special issue: Tribology of Hard Coatings] - R.J.K. Wood
Type: Article
| 2009
| Item not available on this server.
Variation of transverse and shear stiffness properties of wood in a tree - J. Xavier, S. Avril, F. Pierron and J. Morais
Type: Article
| 2009
| Item not available on this server.
A durability model incorporating safe life methodology and damage tolerance approach to assess first inspection and maintenance period for structures - J.J. Xiong and R.A. Shenoi
Type: Article
| 2009
| Item not available on this server.
A modified micromechanical curved beam analytical model to predict the tension modulus of 2D plain weave fabric composites - J.J. Xiong, R.A. Shenoi and X. Cheng
Type: Article
| 2009
| Item not available on this server.
Superplastic flow in a nanostructured aluminum alloy produced using high-pressure torsion - Cheng Xu, Sergey V. Dobatkin, Zenji Horita and Terence G. Langdon
Type: Article
| 2009
| Item not available on this server.
The high-temperature creep properties of materials processed using severe plastic deformation - Cheng Xu, Megumi Kawasaki and Terence G. Langdon
Type: Article
| 2009
| Item not available on this server.
Three-dimensional representations of hardness distributions after processing by high-pressure torsion - Cheng Xu and Terence G. Langdon
Type: Article
| 2009
| Item not available on this server.
Processing of a magnesium alloy by equal-channel angular pressing using a back-pressure - Cheng Xu, Kenong Xia and Terence G. Langdon
Type: Article
| 2009
| Item not available on this server.
Microstructural evolution in pure aluminum in the early stages of processing by high-pressure torsion - Chenggang Xu, Zenji Horita and Terence G. Langdon
Type: Article
| 2009
| Item not available on this server.
Structure and mechanical properties of reactive sputtering CrSiN films - Guangan Zhang, Liping Wang, S.C. Wang, Pengxun Yan and Qunji Xue
Type: Article
| 2009
Influence of specimen dimensions and strain measurement methods on tensile stress-strain curves - Y.H. Zhao, Y.Z. Guo, Q. Wei, T.D. Topping, A.M. Danglewicz, Y.T. Zhu, T.G. Langdon and E.J Lavernia
Type: Article
| 2009
| Item not available on this server.