Items where Division is "Faculties (pre 2018 reorg) > Faculty of Engineering and the Environment (pre 2018 reorg) > Mechanical Engineering (pre 2018 reorg) > Engineering Mats & Surface Engineerg Gp (pre 2018 reorg)
Current Faculties > Faculty of Engineering and Physical Sciences > School of Engineering > Mechanical Engineering > Mechanical Engineering (pre 2018 reorg) > Engineering Mats & Surface Engineerg Gp (pre 2018 reorg)
Mechanical Engineering > Mechanical Engineering (pre 2018 reorg) > Engineering Mats & Surface Engineerg Gp (pre 2018 reorg)" and Year is 2017
 | Up a level |
Jump to: Article | Book Section | Conference or Workshop Item | Monograph | Thesis | Dataset | Review
Number of items: 160.
Article
Effect of ECAP processing on microstructure evolution and dynamic compressive behavior at different temperatures in an Al-Zn-Mg alloy - Mohamed A. Afifi, Pedro H.R. Pereira, Ying Chun Wang, Yangwei Wang, Shukui Li and Terence G. Langdon
Type: Article
| 2017
Development of a clay based bioink for 3D cell printing for skeletal application - T. Ahlfeld, Gianluca Cidonio, D. Kilian, S. Duin, A.R. Akkineni, Jonathan Dawson, Shoufeng Yang, A. Lode, Richard Oreffo and M. Gelinsky
Type: Article
| 2017
Direct influence of recovery behaviour on mechanical properties in oxygen-free copper processed using different SPD techniques: HPT and ECAP - Meshal Y Alawadhi, Shima Sabbaghianrad, Yi Huang and Terence G. Langdon
Type: Article
| 2017
Evolution of homogeneity in oxygen-free copper processed by either ECAP or HPT - Meshal Y. Alawadhi, Yi Huang and Terence G. Langdon
Type: Article
| 2017
Light harvesting in silicon (111) surfaces using covalently attached protoporphyrin IX dyes - Nicholas Alderman, Lefteris Danos, Liping Fang, Martin Grossel and Tom Markvart
Type: Article
| 2017
Microstructural evolution during hot shear deformation of an extruded fine-grained Mg–Gd–Y–Zr alloy - R Alizadeh, R Mahmudi, A.H.W Ngan and Terence G Langdon
Type: Article
| 2017
Microstructural evolution and superplasticity in an Mg–Gd–Y–Zr alloy after processing by different SPD techniques - R. Alizadeh, R. Mahmudi, P.H.R. Pereira, Y. Huang and T.G. Langdon
Type: Article
| 2017
Hardness evolution of AZ80 magnesium alloy processed by HPT at different temperatures - Saad A. Alsubaie, Yi Huang and Terence G Langdon
Type: Article
| 2017
Hardness homogeneity in an AZ80 magnesium alloy processed by high-pressure torsion - Saad A. Alsubaie, Yi Huang and Terence G. Langdon
Type: Article
| 2017
| Item availability restricted.
Characterisation of platinum electrodeposits on a titanium micromesh stack in a rectangular channel flow cell - Luis Fernando Arenas Martinez, Carlos Ponce De Leon, Richard P. Boardman and Frank C. Walsh
Type: Article
| 2017
Complex neuroanatomy in the rostrum of the Isle of Wight theropod Neovenator salerii - Chris Tijani Barker, Darren Naish, Elis Newham, Orestis L. Katsamenis and Gareth Dyke
Type: Article
| 2017
Capacitive electronic metal-support interactions: outer surface charging of supported catalyst particles - Tobias Binninger, Thomas J. Schmidt and Denis Kramer
Type: Article
| 2017
The sequence and kinetics of pre-precipitation in Mg-Nd alloys after HPT processing: a synchrotron and DSC study - Yousf Islem Bourezg, Hiba Azzeddine, Louis Hennet, Dominique Thiaudière, Yi Huang, Djamel Bradai and Terence G Langdon
Type: Article
| 2017
Effect of microstructure on fatigue behaviour of advanced high strength ductile cast iron produced by quenching and partitioning process - André Caetano Melado, Arthur Seiji Nishikawa, Hélio Goldenstein, Michael A. Giles and Philippa A.S. Reed
Type: Article
| 2017
Controlling the high temperature mechanical behavior of Al alloys by precipitation and severe straining - C.M. Cepeda-Jiménez, M. Castillo-Rodríguez, J.M. Molina-Aldareguia, Y. Huang, T.G. Langdon and M.T. Pérez-Prado
Type: Article
| 2017
Influence of Zn content on the microstructure and mechanical performance of ultrafine-grained Al-Zn alloys processed by high-pressure torsion - Nguyen Q. Chinh, Péter Jenei, Jenő Gubicza, Elena V. Bobruk, Ruslan Z. Valiev and Terence G. Langdon
Type: Article
| 2017
Smoothly varying in-plane stiffness heterogeneity evaluated under uniaxial tensile stress - J.M. Considine, F. Pierron, K.T. Turner, P. Lava and X. Tang
Type: Article
| 2017
Characterization and mapping of rolling contact fatigue in rail-axle bearings - Ilaria Corni, Nicola Symonds, Christopher Birrell, Orestis L. Katsamenis, Adam Wasenczuk and David Vincent
Type: Article
| 2017
The influence of plastic deformation on lattice defect structure and mechanical properties of 316L austenitic stainless steel - Moustafa EI-Tahawy, Jenő Gubicza, Yi Huang, Hyelim Choi, Heeman Choe, János L. Lábár and Terence G. Langdon
Type: Article
| 2017
| Item availability restricted.
Evolution of microstructure, phase composition and hardness in 316L stainless steel processed by high-pressure torsion - Moustafa El-Tahawy, Jenő Gubicza, Yi Huang, Hye Lim Choi, Hee Man Choe, János L. Lábár and Terence G. Langdon
Type: Article
| 2017
| Item availability restricted.
High temperature thermal stability of nanocrystalline 316L stainless steel processed by high-pressure torsion - Moustafa El-Tahawy, Yi Huang, Hyelim Choi, Heeman Choe, János L. Lábár, Terence G. Langdon and Jenő Gubicza
Type: Article
| 2017
Stored energy in ultrafine-grained 316L stainless steel processed by high-pressure torsion - Moustafa El-Tahawy, Yi Huang, Taekyung Um, Heeman Choe, János L. Lábár, Terence G. Langdon and Jenő Gubicza
Type: Article
| 2017
Amorphous SiC resistive memory with embedded Cu nanoparticles - Junqing Fan, Liudi Jiang, Shuncai Wang, Ruomeng Huang, Katrina Morgan, Le Zhong and Kees de Groot
Type: Article
| 2017
Developments in processing by severe plastic deformation at the 3rd Pan American Materials Congress - Roberto B. Figueiredo, Megumi Kawasaki and Terence G. Langdon
Type: Article
| 2017
Achieving superplastic properties in a ZK10 magnesium alloy processed by equal-channel angular pressing - Roberto B. Figueiredo and Terence G. Langdon
Type: Article
| 2017
Evidence for exceptional low temperature ductility in polycrystalline magnesium processed by severe plastic deformation - Roberto B. Figueiredo, Shima Sabbaghianrad, Adenike Giwa, Julia R. Greer and Terence G. Langdon
Type: Article
| 2017
The effect of high-pressure torsion on the microstructure and properties of magnesium - Roberto B. Figueiredo, Shima Sabbaghianrad and Terence G. Langdon
Type: Article
| 2017
Application of the virtual fields method to the identification of the homogeneous anisotropic hardening parameters for advanced high strength steels - Jiawei Fu, Frédéric Barlat, Jin-Hwan Kim and Fabrice Pierron
Type: Article
| 2017
Mapping fibre failure in situ in carbon fibre reinforced polymers by fast synchrotron X-ray computed tomography - Serafina, Consuelo Garcea, Ian Sinclair, Simon Spearing and P.J. Withers
Type: Article
| 2017
3D printed oral solid dosage forms containing hydrochlorothiazide for controlled drug delivery - Christos I. Gioumouxouzis, Orestis L. Katsamenis, Nikolaos Bouropoulos and Dimitrios G. Fatouros
Type: Article
| 2017
Fatigue damage evolution in GFRP laminates with constrained off-axis plies - J.A. Glud, J.M. Dulieu-Barton, O.T. Thomsen and L.C.T. Overgard
Type: Article
| 2017
A stochastic multiaxial fatigue model for off-axis cracking in FRP laminates - Jens Glud, Janice Dulieu-Barton, Ole T. Thomsen and L.C.T. Overgaard
Type: Article
| 2017
Micro-mechanical and tribological properties of aluminum-magnesium nanocomposites processed by high-pressure torsion - Jae-Kyung Han, Han-Joo Lee, Jae-il Jang, Megumi Kawasaki and Terence G. Langdon
Type: Article
| 2017
An electrodeposited Ni-P-WS2 coating with combined super-hydrophobicity and self-lubricating properties - Y. He, W.T. Sun, S.C. Wang, P.A.S. Reed and F.C. Walsh
Type: Article
| 2017
Investigation of lattice defects in a plastically deformed high-entropy alloy - Anita Heczel, Yi Huang, Terence G. Langdon and Jenő Gubicza
Type: Article
| 2017
| Item availability restricted.
Defect structure and hardness in nanocrystalline CoCrFeMnNi High-Entropy Alloy processed by High-Pressure Torsion - Anita Heczel, Megumi Kawasaki, János L Lábár, Jae-il Jang, Terence G. Langdon and Jenő Gubicza
Type: Article
| 2017
Influence of high-pressure torsion on the microstructure and the hardness of a Ti-rich high-entropy alloy - Anita Heczel, Lola Lilensten, Julie Bourgon, Loic Perrière, Jean Philippe Couzinié, Ivan Guillot, Guy Dirras, Yi Huang, Terence G. Langdon and Jenő Gubicza
Type: Article
| 2017
| Item availability restricted.
Recovery or non-recovery in Al-0.1% Mg and Al-1% Mg alloy during high-pressure torsion processing - Yi Huang, Justine Millet, Nian Xian Zhang, Pedro Henrique R. Pereira and Terence G. Langdon
Type: Article
| 2017
| Item availability restricted.
Thermal stability and mechanical properties of HPT-processed CP-Ti - Yi Huang, Sarah Mortier, Pedro Henrique Rodrigue Pereira, Piotr Bazarnik, Malgorzata Lewandowska and Terence G. Langdon
Type: Article
| 2017
Comparisons of self-annealing behaviour of HPT-processed high purity Cu and a Pb-Sn alloy - Yi Huang, Shima Sabbaghianrad, Abdulla I. Almazrouee, Khaled J. Al-Fadhalah, Saleh N. Alhajeri, Nian Xian Zhang and Terence G. Langdon
Type: Article
| 2017
Electronic metal-support interaction enhancedoxygen reduction activity and stability of boron carbide supported platinum - Colleen Jackson, Graham Smith, David Inwood, Andrew, Stephen Leach, Penny, Susan Whalley, Mauro Callisti, Tomas Polcar, Andrea E. Russell, Pieter Levecque and Denis Kramer
Type: Article
| 2017
Effects of oxygen-related damage on dwell-fatigue crack propagation in a P/M Ni-based superalloy: From 2D to 3D assessment - Rong Jiang, Daniel Bull, D. Proprentner, B. Shollock and Philippa Reed
Type: Article
| 2017
Characterisation of strain localisation processes during fatigue crack initiation and early crack propagation by SEM-DIC in an advanced disc alloy - Rong Jiang, Fabrice Pierron, Sari Octaviani and Philippa Reed
Type: Article
| 2017
Effect of cold rolling on the structure and hydrogen properties of AZ91 and AM60D magnesium alloys subjected to ECAP - Alberto Moreira Jorge Jr., Egor Prokofiev, Maria Regina Martins Triques, Virginie Roche, Walter José Botta, Claudio Shyinti Kiminami, George I. Raab, Ruslan Z. Valiev and Terence G. Langdon
Type: Article
| 2017
Evolution of the microstructure during annealing in ultrafine-grained Ni with different Mo contents - Garima Kapoor, Yi Huang, V. Subramanya Sarma, Terence G Langdon and Jenő Gubicza
Type: Article
| 2017
Influence of Mo alloying on the thermal stability and hardness of ultrafine-grained Ni processed by high-pressure torsion - Garima Kapoor, Yi Huang, V. Subramanya Sarma, Terence G Langdon and Jenő Gubicza
Type: Article
| 2017
Effect of Mo addition on the microstructure and hardness of ultrafine-grained Ni alloys processed by a combination of cryorolling and high-pressure torsion - Garima Kapoor, Yi Huang, V. Subramanya Sarma, Terence G. Langdon and Jenő Gubicza
Type: Article
| 2017
Self-assembling peptide nanofiber hydrogels for controlled ocular delivery of timolol maleate - Christina Karavasili, Anastasia Komnenou, Orestis L. Katsamenis, Glykeria Charalampidou, Evangelia Kofidou, Dimitrios Andreadis, Sotirios Koutsopoulos and Dimitrios G. Fatouros
Type: Article
| 2017
Nano- and micro-mechanical properties of ultrafine-grained materials processed by severe plastic deformation techniques - Megumi Kawasaki, Byungmin Ahn, Praveen Kumar, Jae-il Jang and Terence G. Langdon
Type: Article
| 2017
The development of superplasticity and deformation mechanism maps in an ultrafine-grained magnesium alloy - Megumi Kawasaki, Roberto B. Figueiredo and Terence G. Langdon
Type: Article
| 2017
| Item availability restricted.
Fabrication of hybrid metal systems through the application of high-pressure torsion - Megumi Kawasaki, Dae-Kuen Han, Jae-Kyung Han, Jae-il Jang and Terence G. Langdon
Type: Article
| 2017
Micro-mechanical responses of ultrafine-grained materials processed through high-pressure torsion. - Megumi Kawasaki, Jae Il Jang, Byung Min Ahn and Terence G. Langdon
Type: Article
| 2017
| Item availability restricted.
Strengthening of metals through severe plastic deformation - Megumi Kawasaki, Han-Joo Lee, Jae-il Jang and Terence G. Langdon
Type: Article
| 2017
| Item availability restricted.
Using severe plastic deformation to fabricate strong metal matrix composites - Megumi Kawaski and Terence G. Langdon
Type: Article
| 2017
Measurement of micro-scale soil deformation around roots using 4D synchrotron tomography and image correlation - Samuel Keyes, Laura Cooper, Nicolai Koebernick, Simon, Jack Duncan, Daniel, Marcus McKay Fletcher, Callum, Paul Scotson, Arjen Van Veelen, Ian Sinclair and Tiina Roose
Type: Article
| 2017
Type: Article
| 2017
High-resolution synchrotron imaging shows that root hairs influence rhizosphere soil structure formation - Nicolai Koebernick, Keith Daly, Samuel Keyes, TImothy S. George, Lawrie Brown, Annette Raffan, Laura Cooper, Muhammad Naveed, Anthony G. Bengough, Ian Sinclair, Paul D. Hallett and Tiina Roose
Type: Article
| 2017
Resolving the strength-ductility paradox through severe plastic deformation of a cast Al-7% Si alloy - Praveen Kumar, Megumi Kawasaki and Terence G. Langdon
Type: Article
| 2017
| Item availability restricted.
Annealing effect on plastic flow in nanocrystalline CoCrFeMnNi high-entropy alloy: A nanomechanical analysis - Dong-Hyun Lee, Jung-A Lee, Yakai Zhao, Zhaoping Lu, Jin-Yoo Suh, Ju-Young Kim, Upadrasta Ramamurty, Megumi Kawaski, Terence G. Langdon and Jae-il Jang
Type: Article
| 2017
Mechanical behavior of a metal matrix nanocomposite synthesized by high-pressure torsion via diffusion bonding - Han Joo Lee, Jae Kyung Han, Byung Min Ahn, Megumi Kawasaki and Terence G. Langdon
Type: Article
| 2017
| Item availability restricted.
Shear fracture mechanism in micro-tension of an ultrafine-grained pure copper using synchrotron radiation X-ray tomography - Jianwei Li, Jie Xu, Bin Guo, Debin Shan and Terence G. Langdon
Type: Article
| 2017
Microstructural evolution and properties of a hot extruded and HPT-processed resorbable magnesium WE43 alloy - Dexue X. Liu, Xin Pang, Denglu L. Li, Chenggong G. Guo, Jittraporn Wongsa-Ngam, Terence G. Langdon and Marc A. Meyers
Type: Article
| 2017
Singlet oxygen generation as a major cause for parasitic reactions during cycling of aprotic lithium–oxygen batteries - Nika Mahne, Bettina Schafzahl, Christian Leypold, Mario Leypold, Sandra Grumm, Anita Leitgeb, Gernot A. Strohmeier, Martin Wilkening, Olivier Fontaine, Denis Kramer, Christian Slugovc, Sergey M. Borisov and Stefan A. Freunberger
Type: Article
| 2017
Sensitivity-based virtual fields for the non-linear virtual fields method - Aleksander Marek, Frances Davis and Fabrice Pierron
Type: Article
| 2017
Reciprocity and open circuit voltage in solar cells - Tom Markvart
Type: Article
| 2017
Effects on hardness and microstructure of AISI 1020 low-carbon steel processed by high-pressure torsion - Diana Maritza Marulanda Cardona, Jittraporn Wongsa-Ngam, Hernando Jimenez and Terence G. Langdon
Type: Article
| 2017
Effect of intermetallic particles and grain boundaries on short fatigue crack growth behaviour in a cast Al-4Cu-3Ni-0.7Si piston alloy - T.O. Mbuya, Y. Gu, R.C. Thomson and P.A.S. Reed
Type: Article
| 2017
Application of X-Ray microtomography to evaluate complex microstructure and predict the lower bound fatigue potential of cast Al–7(0.7)Si–4Cu–3Ni–Mg alloys - Thomas O. Mbuya, Ian Sinclair, Katherine Soady and Philippa Reed
Type: Article
| 2017
The influence of point defects on the entropy profiles of Lithium Ion Battery cathodes: a lattice-gas Monte Carlo study - Michael Mercer, Sophie Finnigan, Denis Kramer, Daniel Richards and Harry Hoster
Type: Article
| 2017
Investigation on porosity and microhardness of 316L stainless steel fabricated by selective laser melting - Shahir Mohd Yusuf, Yifei Chen, Richard Boardman, Shoufeng Yang and Nong Gao
Type: Article
| 2017
Active counter electrode in a-SiC electrochemical metallization memory - K.A. Morgan, J. Fan, R. Huang, L. Zhong, R. Gowers, J.-Y. Ou, L. Jiang and C.H. de Groot
Type: Article
| 2017
Effect of equal-channel angular pressing on the mechanical behavior of a Bi-Sn eutectic alloy - Fariba Naghdi, Roberto B. Figueiredo and Terence G. Langdon
Type: Article
| 2017
Rhizosphere-scale quantification of hydraulic and mechanical properties of soil impacted by root and seed exudates - M. Naveed, L.K. Brown, A.C. Raffan, T.S. George, A.G. Bengough, T. Roose, I. Sinclair, N. Koebernick, L. Cooper and P.D. Hallett
Type: Article
| 2017
Plant exudates may stabilize or weaken soil depending on species, origin and time - Muhammad Naveed, Lawrie Brown, Annette Raffan, Tim George, Anthony G. Bengough, Tiina Roose, Ian Sinclair, Nicolai Koebernick, Laura Cooper and Paul D. Hallett
Type: Article
| 2017
Influence of cortical bone thickness on miniscrew microcrack formation - Melissa V. Nguyen, John Codrington, Lloyd Fletcher, Colin W. Dreyer and Wayne J. Sampson
Type: Article
| 2017
| Item not available on this server.
Elastic modulus varies along the bovine femur - Sabah Nobakhti, Orestis L. Katsamenis, Nizar Zaarour, Georges Limbert and Philipp J. Thurner
Type: Article
| 2017
An examination of the superplastic characteristics of Al-Mg-Sc alloys after processing - Pedro H.R. Pereira, Yi Huang, Megumi Kawaski and Terence G. Langdon
Type: Article
| 2017
Examining the microhardness evolution and thermal stability of an Al-Mg-Sc alloy processed by high-pressure torsion at a high temperature - Pedro H.R. Pereira, Yi Huang and Terence G. Langdon
Type: Article
| 2017
Examining the thermal stability of an Al-Mg-Sc alloy processed by High-Pressure Torsion - Pedro H.R. Pereira, Yi Huang and Terence G. Langdon
Type: Article
| 2017
Influence of initial heat treatment on the microhardness evolution of an Al-Mg-Sc alloy processed by high-pressure torsion - Pedro Henrique R. Pereira, Yi Huang and Terence G. Langdon
Type: Article
| 2017
| Item availability restricted.
Thermal stability and superplastic behaviour of an Al-Mg-Sc alloy processed by ECAP and HPT at different temperatures - Pedro Henrique Rodrigue Pereira, Yi Huang and Terence G. Langdon
Type: Article
| 2017
Influence of grain size on the flow properties of an Al-Mg-Sc alloy over seven orders of magnitude of strain rate - Pedro Henrique Rodrigue Pereira, Ying Chun Wang, Yi Huang and Terence G. Langdon
Type: Article
| 2017
Influence of grain boundary misorientations on the mechanical behavior of a near-alpha Ti-6Al-7Nb alloy processed by ECAP - V.V. Polyakova, I.P. Semenova, A.V. Polyakov, D.K. Magomedova, Y. Huang and T.G. Langdon
Type: Article
| 2017
Weld zone material characterisation based on spherical indentation data - STAVROS SYNGELLAKIS, H. Habbab and Brian Mellor
Type: Article
| 2017
Mechanical behavior and impact toughness of the ultrafine-grained Grade 5 Ti alloy processed by ECAP - Irina P Semenova, Alex V Ployakov, Veronika V Polyakova, Yu F Grishina, Yi Huang, Ruslan Z Valiev and Terence G Langdon
Type: Article
| 2017
Evidence for superplasticity in a CoCrFeNiMn high-entropy alloy processed by high-pressure torsion - Hamed Shahmir, Junyang He, Zhaoping Lu, Megumi Kawasaki and Terence G. Langdon
Type: Article
| 2017
The potential for achieving superplasticity in high-entropy alloys processed by severe plastic deformation - Hamed Shahmir, Megumi Kawasaki and Terence G. Langdon
Type: Article
| 2017
An evaluation of the hexagonal close-packed to face-centered cubic phase transformation in a Ti-6Al-4V alloy during high-pressure torsion - Hamed Shahmir and Terence Langdon
Type: Article
| 2017
Using heat treatments, high-pressure torsion and post-deformation annealing to optimize the properties of Ti-6Al-4V alloys - Hamed Shahmir and Terence G. Langdon
Type: Article
| 2017
Microstructure and properties of a CoCrFeNiMn high-entropy alloy processed by equal-channel angular pressing - Hamed Shahmir, Tayebeh Mousavi, Junyang He, Zhaoping Lu, Megumi Kawaski and Terence G. Langdon
Type: Article
| 2017
Hardening and thermal stability of a nanocrystalline CoCrFeNiMnTi0.1 high-entropy alloy processed by high-pressure torsion - Hamed Shahmir, Mahmoud Nili-Ahmadabadi, Ahad Shafie and Terence G. Langdon
Type: Article
| 2017
Effect of severe plastic deformation on the biocompatibility and corrosion rate of pure magnesium - Cláudio L. P. Silva, Ana Celeste Oliveira, Cíntia G. F. Costa, Roberto B. Figueiredo, Maria de Fátima Leite, Marivalda M. Pereira, Vanessa F. C. Lins and Terence G. Langdon
Type: Article
| 2017
Microstructure and hardness evolution in magnesium processed by HPT - Cláudio L. P. Silva, Isabela C. Tristão, Shima Sabbaghianrad, Seyed A. Torbati-Sarraf, Roberto B. Figueiredo and Terence G. Langdon
Type: Article
| 2017
Type: Article
| 2017
Microstructure and mechanical properties of a nanostructured Mg-8.2Gd-3.8Y-1.0Zn-0.4Zr supersaturated solid solution prepared by high pressure torsion - W.T. Sun, X.G. Qiao, M.Y. Zheng, C. Xu,, N. Gao and M.J. Starink
Type: Article
| 2017
Evolution of microstructure and mechanical properties of an as-cast Mg-8.2Gd-3.8Y-1.0Zn-0.4Zr alloy processed by high pressure torsion - W.T. Sun, C. Xu,, X G Xiao, M.Y. Zheng, S Kamado, Nong Gao and Marco Starink
Type: Article
| 2017
High-pressure torsion-induced phase transformations and grain refinement in Al/Ti composites - Y. Sun, M. Aindow, R.J.H. Herbert, Terence G. Langdon and E.J. Lavernia,
Type: Article
| 2017
Finite element simulation of spherical indentation experiments - Stavros Syngellakis, H. Habbab and Brian Mellor
Type: Article
| 2017
A combined kinematic and kinetic analysis at the residuum/socket interface of a knee-disarticulation amputee - Jinghua Tang, Michael Mcgrath, Nicholas Hale, Liudi Jiang, Daniel Bader, Piotr Laszczak, David Moser and Saeed Zahedi
Type: Article
| 2017
Infrared techniques for practical defect identification in bonded joints in liquefied natural gas carriers - R.C. Tighe, J.M. Dulieu-Barton and S. Quinn
Type: Article
| 2017
Orientation imaging microscopy and microhardness in a ZK60 magnesium alloy processed by high-pressure torsion - Seyed A. Torbati-Sarraf, Shima Sabbaghianrad, Roberto B. Figueiredo and Terence G. Langdon
Type: Article
| 2017
Evaluating the flow properties of a magnesium ZK60 alloy processed by high-pressure torsion: a comparison of two different miniature testing techniques - Seyed Alireza Torbati-Sarraf, Reza Alizadeh, Reza Mahmudi and Terence G. Langdon
Type: Article
| 2017
The 7th International Conference on Nanomaterials by Severe Plastic Deformation: a report of the International NanoSPD Steering Committee - Ruslan Z. Valiev and Terence G. Langdon
Type: Article
| 2017
Characterisation of the interlaminar properties of composites at high strain rates: A review - Jared Van Blitterswyk, Lloyd Fletcher and Fabrice Pierron
Type: Article
| 2017
| Item availability restricted.
Identification of Curie temperature distributions in magnetic particulate systems - Jonathon, Michael Waters, Andreas Berger, Denis Kramer, Hans Fangohr and Ondrej Hovorka
Type: Article
| 2017
A numerical study of the effects of shot peening on the short crack growth behaviour in notched geometries under bending fatigue tests - Chao You, Mithila Achintha, Binyan He and Philippa Reed
Type: Article
| 2017
Low cycle fatigue life prediction in shot-peened components of different geometries – Part II: life prediction - Chao You, Mithila Achintha, Katherine Soady and Philippa Reed
Type: Article
| 2017
Low cycle fatigue life prediction in shot-peened components of different geometries – Part I: residual stress relaxation - Chao You, Mithila Achintha, Katherine Soady, Niall Smyth, Michael Fitzpatrick and Philippa Reed
Type: Article
| 2017
Numerical modelling of the fatigue crack shape evolution in a shot-peened steam turbine material - Chao You, Binyan He, Mithila Achintha and Philippa Reed
Type: Article
| 2017
Soft tissue 3D imaging in the lab through optimised propagation-based phase contrast computed tomography - Berit Zeller-Plumhoff, Joshua L. Mead, Deck Tan, Tiina Roose, Geraldine Clough, Richard Boardman and Philipp Schneider
Type: Article
| 2017
Phase contrast synchrotron radiation computed tomography of muscle spindles in the mouse soleus muscle - Berit Zeller-Plumhoff, Tiina Roose, Mark Mavrogordato, Orestis Katsamenis, Christopher Torrens, Philipp Schneider and Geraldine Clough
Type: Article
| 2017
Wear resistance and electroconductivity in a Cu–0.3Cr–0.5Zr alloy processed by ECAP - A.P. Zhilyaev, A. Morozova, J. M. Cabrera, R. Kaibyshev and T.G. Langdon
Type: Article
| 2017
Mechanical behavior and microstructure properties of titanium powder consolidated by high-pressure torsion - Alex P. Zhilyaev, Geoffrey Ringot, Yi Huang, Jose Maria Cabrera and Terence G. Langdon
Type: Article
| 2017
Characterization approach on the extrusion process of bioceramics for the 3D printing of bone tissue engineering scaffolds - Gaoyan Zhong, Mohammad Vaezi, Ping Liu, Lin Pan and Shoufeng Yang
Type: Article
| 2017
Preparation and characterization of large unilamellar vesicles mixed with trimethylchitosan (TMC): the effect of polyelectrolyte concentration - S.M. van der Merwe, N. Bouropoulos, D.A. Lamprou, O.L. Katsamenis and D.G. Fatouros
Type: Article
| 2017
Book Section
Finite element modelling of a series of austenitic stainless steel 316 L weldments to inform thermoelastic stress analysis residual stress assessment - E.C. Chevallier, S. Blackwell and J.M. Dulieu-Barton
Type: Book Section
| 2017
| Springer
| Item not available on this server.
Effective models for predicting strength of severely plastically deformed metals and alloys - Marco Starink
Type: Book Section
| 2017
| Item not available on this server.
Conference or Workshop Item
The role of microconstituents on the fatigue failure of bone cement - Martin Browne, Natalie Shearwood-Porter and Ian Sinclair
Type: Conference or Workshop Item
| 2017
| Item availability restricted.
Reshaping the testing pyramid: Utilisation of data-rich NDT techniques as a means to develop a 'high fidelity' component and sub-structure testing methodology for composites - D. Bull, J. Barton, O. Thomsen, R. Butler, A.T. Rhead, A Fletcher and K.D. Potter
Type: Conference or Workshop Item
| 2017
Applying conventional creep mechanisms to ultrafine-grained materials - Megumi Kawasaki and Terence G. Langdon
Type: Conference or Workshop Item
| 2017
| Springer
| Item availability restricted.
Inside a feather: laminar layup varies around and along bird feather shafts - Christian Laurent, Philipp Schneider, Gareth Dyke, Richard Boardman, C. Palmer, Richard Cook and Roeland De Kat
Type: Conference or Workshop Item
| 2017
Characterization of through-thickness thermal conductivity of wind turbine blade CFRP materials using a steady-state technique - Evangelos Senis, Igor O. Golosnoy, Ole Thomsen, Janice Barton and Soren Madsen
Type: Conference or Workshop Item
| 2017
Reducing the electrical anisotropy in unidirectional CFRP materials for wind turbine blade applications - Evangelos Senis, Orestis Vryonis, Igor O. Golosnoy, Ole Thomsen, Janice Barton and Soren Madsen
Type: Conference or Workshop Item
| 2017
A comprehensive mechanotransduction model for tactile feedback based on multi-axial stresses at the fingertip-contact interface - Maria Valero, Nicholas Hale, Jinghua Tang and Liudi Jiang
Type: Conference or Workshop Item
| 2017
The use of micro-computed tomography and advanced imaging techniques to study crystalline biofilm blockages in urinary catheters - Sandra Wilks, Orestis L. Katsamenis, Dario Carugo, Charles Keevil and Miranda Fader
Type: Conference or Workshop Item
| 2017
| Item not available on this server.
Critical revision of experimental data on simultaneous increase of strength and ductility in SPD pure metals - Alexandr P. Zhilyaev, Yi Huang, Jose Maria Cabrera and Terence G. Langdon
Type: Conference or Workshop Item
| 2017
| Kyushu University Press
Monograph
Modernising composite materials regulations: A position paper - Robert Stevens, Simon Quinn, Robert Veal, Simon Gerrard, Michael Tsimplis, Janice Dulieu-Barton and Ole Thomsen
Type: Monograph
| 2017
| University of Southampton
Thesis
Microstructural evolution and mechanical properties of oxygen-free copper processed by severe plastic deformation - Meshal, Y Alawadhi
Type: Thesis
| 2017
| University of Southampton
Assessment of welding induced plastic strain using the thermoelastic stress analysis technique - Elise Camille Chevallier
Type: Thesis
| 2017
| University of Southampton
Oxidation-fatigue mechanisms at moderate service temperatures in single crystal turbine blade materials - Angelos Evangelou
Type: Thesis
| 2017
| University of Southampton
Identification of plastic strain using thermoelastic stress analysis - Geoffrey Howell
Type: Thesis
| 2017
| University of Southampton
3D printing of bone tissue engineering scaffolds and production of PEEK-based biocomposites - Mohammad Vaezi
Type: Thesis
| 2017
| University of Southampton
Type: Thesis
| 2017
| University of Southampton
Dataset
Type: Dataset
| 2017
| University of Southampton
Type: Dataset
| 2017
| University of Southampton
Type: Dataset
| 2017
| University of Southampton
Type: Dataset
| 2017
| University of Southampton
Type: Dataset
| 2017
| University of Southampton
Type: Dataset
| 2017
| University of Southampton
Type: Dataset
| 2017
| University of Southampton
Type: Dataset
| 2017
| University of Southampton
Type: Dataset
| 2017
| University of Southampton
Type: Dataset
| 2017
| University of Southampton
Type: Dataset
| 2017
| University of Southampton
Type: Dataset
| 2017
| University of Southampton
Type: Dataset
| 2017
| University of Southampton
Type: Dataset
| 2017
| University of Southampton
Type: Dataset
| 2017
| University of Southampton
| Item not available on this server.
Type: Dataset
| 2017
| University of Southampton
Type: Dataset
| 2017
| University of Southampton
Type: Dataset
| 2017
| University of Southampton
Type: Dataset
| 2017
| University of Southampton
Type: Dataset
| 2017
| University of Southampton
Type: Dataset
| 2017
| University of Southampton
Type: Dataset
| 2017
| University of Southampton
Type: Dataset
| 2017
| University of Southampton
Type: Dataset
| 2017
| University of Southampton
Type: Dataset
| 2017
| University of Southampton
Review
Influence of energy density on metallurgy and properties in metal additive manufacturing - Shahir Yasin Bin Mohd Yusuf and Nong Gao
Type: Review
| 2017
A Fourier-series-based virtual fields method for the identification of three-dimensional stiffness distributions and its application to incompressible materials - Tho Nguyen, Jonathan M. Huntley, Ian Ashcroft, Pablo D. Ruiz and Fabrice Pierron
Type: Review
| 2017