Items where Division is "Faculties (pre 2018 reorg) > Faculty of Engineering and the Environment (pre 2018 reorg)" and Year is 2017
 | Up a level |
Number of items: 82.
Article
Interaction of task difficulty and gender stereotype threat with a spatial orientation task in a virtual nested environment - Craig Allison, Edward Redhead and Wai Chan
Type: Article
| 2017
Proposal of a micromagnetic standard problem for ferromagnetic resonance simulations - Alexander Baker, Marijan Beg, Gregory Ashton, Maximilian Albert, Dmitri Chernyshenko, Weiwei Wang, Shiley Zhang, Marc-Antonio Bisotti, Matteo Franchin, Chun Lian Hu, Robert Stamps, Thorsten Hesjedal and Hans Fangohr
Type: Article
| 2017
Complex neuroanatomy in the rostrum of the Isle of Wight theropod Neovenator salerii - Chris Tijani Barker, Darren Naish, Elis Newham, Orestis L. Katsamenis and Gareth Dyke
Type: Article
| 2017
Dynamics of skyrmionic states in confined helimagnetic nanostructures - Marijan Beg, Maximilian Albert, Marc-Antonio Bisotti, David Cortes-Ortuno, Weiwei Wang, Rebecca Carey, Mark Vousden, Ondrej Hovorka, Chiara Ciccarelli, Charles S. Spencer, Christopher H. Marrows and Hans Fangohr
Type: Article
| 2017
Deformation mechanisms of idealised cermets under multi-axial loading - E. Bele, A. Goel, E. G. Pickering, G. Borstnar, O. L. Katsamenis, F. Pierron, K. Danas and V. S. Deshpande
Type: Article
| 2017
Skin-friction measurements in a turbulent boundary layer under the influence of free-stream turbulence - Luis Blay Esteban, Eda Dogan, Eduardo Rodriguez-Lopez and Bharathram Ganapathisubramani
Type: Article
| 2017
Combined size and texture-dependent deformation and strengthening mechanisms in Zr/Nb nano-multilayers - Mauro Callisti and Tomas Polcar
Type: Article
| 2017
Probabilistic behavioral modeling in building performance simulation: A Monte Carlo approach - Fulvio Re Cecconi, Massimiliano Manfren, Lavinia Chiara Tagliabue, Angelo Luigi Camillo Ciribini and Enrico De Angelis
Type: Article
| 2017
| Item not available on this server.
Fluid flow in porous media using image based modelling to parametrise Richards’ equation - Laura Cooper, Keith Daly, P.D. Hallett, Muhammad Naveed, Nicolai Koebernick, Anthony G. Bengough, T.S. George and Tiina Roose
Type: Article
| 2017
Thermal stability and topological protection of skyrmions in nanotracks - David Cortes, Weiwei Wang, Marijan Beg, Ryan Pepper, Marc-Antonio Bisotti, Rebecca Carey, Mark Vousden, Thomas Kluyver, Ondrej Hovorka and Hans Fangohr
Type: Article
| 2017
Modelling water dynamics in the rhizosphere - Keith Daly, Laura Cooper, Nicolai Koebernick, J. Evaristo, Samuel Keyes, Arjen Van Veelen and Tiina Roose
Type: Article
| 2017
Mapping fibre failure in situ in carbon fibre reinforced polymers by fast synchrotron X-ray computed tomography - Serafina, Consuelo Garcea, Ian Sinclair, Simon Spearing and P.J. Withers
Type: Article
| 2017
Design and validation of an unmanned surface vehicle simulation model - Peter H. Heins, Bryn Ll. Jones and Dominic Taunton
Type: Article
| 2017
Comparative analysis of domestic and feeder connected batteries for low voltage networks with high photovoltaic penetration - George Hilton, Andrew Cruden and Jeremy Kent
Type: Article
| 2017
Comparisons of self-annealing behaviour of HPT-processed high purity Cu and a Pb-Sn alloy - Yi Huang, Shima Sabbaghianrad, Abdulla I. Almazrouee, Khaled J. Al-Fadhalah, Saleh N. Alhajeri, Nian Xian Zhang and Terence G. Langdon
Type: Article
| 2017
Electronic metal-support interaction enhancedoxygen reduction activity and stability of boron carbide supported platinum - Colleen Jackson, Graham Smith, David Inwood, Andrew, Stephen Leach, Penny, Susan Whalley, Mauro Callisti, Tomas Polcar, Andrea E. Russell, Pieter Levecque and Denis Kramer
Type: Article
| 2017
The inferomedial femoral neck is compromised by age but not disease: Fracture toughness and the multifactorial mechanisms comprising reference point microindentation - T. Jenkins, O.L. Katsamenis, O.G. Andriotis, L.V. Coutts, B. Carter, D.G. Dunlop, R.O.C. Oreffo, C. Cooper, N.C. Harvey, P.J. Thurner and Nigel Arden
Type: Article
| 2017
Modified capacity design rule for columns in tall steel MRFs with linear viscous dampers within the framework of Eurocode 8 - Konstantinos Kariniotakis and Theodore L. Karavasilis
Type: Article
| 2017
Measurement of micro-scale soil deformation around roots using 4D synchrotron tomography and image correlation - Samuel Keyes, Laura Cooper, Nicolai Koebernick, Simon, Jack Duncan, Daniel, Marcus McKay Fletcher, Callum, Paul Scotson, Arjen Van Veelen, Ian Sinclair and Tiina Roose
Type: Article
| 2017
High-resolution synchrotron imaging shows that root hairs influence rhizosphere soil structure formation - Nicolai Koebernick, Keith Daly, Samuel Keyes, TImothy S. George, Lawrie Brown, Annette Raffan, Laura Cooper, Muhammad Naveed, Anthony G. Bengough, Ian Sinclair, Paul D. Hallett and Tiina Roose
Type: Article
| 2017
Implications of multi‐asperity contact for shear stress distribution in the viable epidermis – An image‐based finite element study - Maria F. Leyva Mendivil, Jakub Lengiewicz, Anthony Page, Neil W. Bressloff and Georges Limbert
Type: Article
| 2017
Effect of intermetallic particles and grain boundaries on short fatigue crack growth behaviour in a cast Al-4Cu-3Ni-0.7Si piston alloy - T.O. Mbuya, Y. Gu, R.C. Thomson and P.A.S. Reed
Type: Article
| 2017
Development of a residuum/socket interface simulator for lower limb prosthetics - Michael Mcgrath, Jianliang Gao, Jing Tang, Piotr Laszczak, Liudi Jiang, Dan Bader, David Moser and Saeed Zahedi
Type: Article
| 2017
Active counter electrode in a-SiC electrochemical metallization memory - K.A. Morgan, J. Fan, R. Huang, L. Zhong, R. Gowers, J.-Y. Ou, L. Jiang and C.H. de Groot
Type: Article
| 2017
Rhizosphere-scale quantification of hydraulic and mechanical properties of soil impacted by root and seed exudates - M. Naveed, L.K. Brown, A.C. Raffan, T.S. George, A.G. Bengough, T. Roose, I. Sinclair, N. Koebernick, L. Cooper and P.D. Hallett
Type: Article
| 2017
Plant exudates may stabilize or weaken soil depending on species, origin and time - Muhammad Naveed, Lawrie Brown, Annette Raffan, Tim George, Anthony G. Bengough, Tiina Roose, Ian Sinclair, Nicolai Koebernick, Laura Cooper and Paul D. Hallett
Type: Article
| 2017
Self-lubricating Al-WS2 composites for efficient and greener tribological parts - Vlad Bogdan Niste, Monica Ratoi, Hiroyoshi Tanaka, Fang Xu, Yanqiu Zhu and Joichi Sugimura
Type: Article
| 2017
Elastic modulus varies along the bovine femur - Sabah Nobakhti, Orestis L. Katsamenis, Nizar Zaarour, Georges Limbert and Philipp J. Thurner
Type: Article
| 2017
The rapid development of bespoke small unmanned aircraft: a proposed design loop - Christopher Paulson, Andras Sobester and James Scanlan
Type: Article
| 2017
An insight into torque production and power factor in transverse-flux machines - Jaime Renedo Anglada and Suleiman Sharkh
Type: Article
| 2017
Dynamic mechanical properties of isotropic/anisotropic silicon magnetorheological elastomer composites - K. Sapouna, Y. P. Xiong and R. A. Shenoi
Type: Article
| 2017
Livelihood diversification: the role of charcoal production in southern Malawi - Harriet Smith, Malcolm Hudson and Kate Schreckenberg
Type: Article
| 2017
A review of screen-printed silver/silver chloride (Ag/AgCl) reference electrodes potentially suitable for environmental potentiometric sensors - Marios Sophocleous and John K. Atkinson
Type: Article
| 2017
Infrared techniques for practical defect identification in bonded joints in liquefied natural gas carriers - R.C. Tighe, J.M. Dulieu-Barton and S. Quinn
Type: Article
| 2017
A model for the rapid assessment of the impact of aviation noise near airports - Antonio Torija, Rod Self and Ian Flindell
Type: Article
| 2017
Type: Article
| 2017
Direct numerical simulations of a high pressure turbine vane - A.P.S. Wheeler, R.D. Sandberg, N. Sandham, R. Pichler, V. Michelassi and G. Laskowski
Type: Article
| 2017
| Item availability restricted.
Dynamic interactions of an integrated vehicle–electromagnetic energy harvester–tire system subject to uneven road excitations - Jing Xing, Zhe Sun, Sulian Zhou and Mingyi Tan
Type: Article
| 2017
A numerical study of the effects of shot peening on the short crack growth behaviour in notched geometries under bending fatigue tests - Chao You, Mithila Achintha, Binyan He and Philippa Reed
Type: Article
| 2017
Numerical modelling of the fatigue crack shape evolution in a shot-peened steam turbine material - Chao You, Binyan He, Mithila Achintha and Philippa Reed
Type: Article
| 2017
Characterization approach on the extrusion process of bioceramics for the 3D printing of bone tissue engineering scaffolds - Gaoyan Zhong, Mohammad Vaezi, Ping Liu, Lin Pan and Shoufeng Yang
Type: Article
| 2017
Flow between the train underbody and trackbed around the bogie area and its impact on ballast flight - Jianyue Zhu and Zhiwei Hu
Type: Article
| 2017
Conference or Workshop Item
Characterization of wear and corrosion products from around a retrieved CoCrMo taper junction - Alina-Mariana Crainic, Mauro Callisti, Martin Palmer and Richard Cook
Type: Conference or Workshop Item
| 2017
Investigation of wear and corrosion products from around explanted CoCrMo tapers - Alina-Mariana Crainic, Mauro Callisti, Martin Palmer and Richard Cook
Type: Conference or Workshop Item
| 2017
Whole-body oscillatory motion and road-transport innovations: A human-factor-and-ergonomics perspective within a ride-quality framework - Francesco D'Amore and Yi Qiu
Type: Conference or Workshop Item
| 2017
| Cranfield University
A contact-separation mode triboelectric nanogenerator for ocean wave impact energy harvesting - Ulises Tronco Jurado, Suan Hui Pu and Neil M. White
Type: Conference or Workshop Item
| 2017
| IEEE
| Item not available on this server.
Autonomous Unmanned Aerial Vehicle perching and manipulation on a street lamppost - Chang Liu, Leyton Paget, Peter Turner, Mehmet Ali Erbil and Stephen Prior
Type: Conference or Workshop Item
| 2017
A-based optimal coordination of vehicle-to-grid batteries and renewable generators in a distribution network - Lu Wang, Suleiman Sharkh and Andy Chipperfield
Type: Conference or Workshop Item
| 2017
| IEEE
| Item not available on this server.
Thesis
Effects of large-scale free stream turbulence on a zero-pressure-gradient turbulent boundary layer - Eda Dogan
Type: Thesis
| 2017
| University of Southampton
Development and operation of an electrically rechargeable zinc-air flow battery - Scott Francis Gorman
Type: Thesis
| 2017
| University of Southampton
Aerostat for electric power generation - Daniel Greenhalgh
Type: Thesis
| 2017
| University of Southampton
Enhancing urban road traffic carbon dioxide emissions models - Matthew Grote
Type: Thesis
| 2017
| University of Southampton
Multiphase numerical modelling of particle-flow interactions in plasma spraying processes - Konstantinos Koutsakis
Type: Thesis
| 2017
| University of Southampton
Improvements to the soluble lead redox flow battery - Muthukumaran Kandaswamy Krishna
Type: Thesis
| 2017
| University of Southampton
Dynamic modelling of glycaemic prediction in people with Type 1 diabetes based on genetic algorithm optimisation - Ahmad Uzair Mazlan
Type: Thesis
| 2017
| University of Southampton
The rapid development of bespoke sensorcraft:a proposed design loop for small unmanned aircraft - Christopher Paulson
Type: Thesis
| 2017
| University of Southampton
Development of the boundary conditions required for simulating a wave tank using smoothed particle hydrodynamics - Mark, Graham Pearce
Type: Thesis
| 2017
| University of Southampton
A virtual boundary method for compressible flow with application to aeroacoustics of compliant trailing-edges - Stefan, Christian Schlanderer
Type: Thesis
| 2017
| University of Southampton
Thermal stability and current transfer in twisted-pair helium gas-cooled MgB2 DC cables - Jessica Spurrell
Type: Thesis
| 2017
| University of Southampton
Algorithms for studying murine airway structure in microfocus computed tomography images - Nicholas, Philip Udell
Type: Thesis
| 2017
| University of Southampton
3D printing of bone tissue engineering scaffolds and production of PEEK-based biocomposites - Mohammad Vaezi
Type: Thesis
| 2017
| University of Southampton
Dataset
Type: Dataset
| 2017
| University of Southampton
Type: Dataset
| 2017
| University of Southampton
Type: Dataset
| 2017
| Zenodo
| Item not available on this server.
Type: Dataset
| 2017
| Zenodo
| Item not available on this server.
Type: Dataset
| 2017
| Zenodo
| Item not available on this server.
Type: Dataset
| 2017
| Zenodo
| Item not available on this server.
Type: Dataset
| 2017
| University of Southampton
Type: Dataset
| 2017
| University of Southampton
Type: Dataset
| 2017
| Zenodo
| Item not available on this server.
Type: Dataset
| 2017
| University of Southampton
Type: Dataset
| 2017
| University of Southampton
Type: Dataset
| 2017
| University of Southampton
Type: Dataset
| 2017
| University of Southampton
Type: Dataset
| 2017
| University of Southampton
Type: Dataset
| 2017
| University of Southampton
Type: Dataset
| 2017
| University of Southampton
Type: Dataset
| 2017
| University of Southampton
Type: Dataset
| 2017
| University of Southampton
Type: Dataset
| 2017
| University of Southampton
Type: Dataset
| 2017
| University of Southampton
Type: Dataset
| 2017
| University of Southampton