The University of Southampton
University of Southampton Institutional Repository

Items where Division is "Current Faculties > Faculty of Engineering and Physical Sciences > School of Engineering > Mechanical Engineering > Engineering Materials and Surface Engineering Group
Mechanical Engineering > Engineering Materials and Surface Engineering Group" and Year is 2019

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: No Grouping | Authors/Creators | Item Type
Number of items: 111.

Article

Strain rate dependence of compressive behavior in an Al-Zn-Mg alloy processed by ECAP - Mohamed A. Afifi, Ying Chun Wang, Xingwang Cheng, Shukui Li and Terence G. Langdon
Type: Article | 2019 | Item not available on this server.

Type: Article | 2019

In-situ Ti-6Al-4V/TiC composites synthesized by reactive spark plasma sintering: processing, microstructure, and dry sliding wear behaviour - Mingwen Bai, Righdan Namus, Yidong Xu, Dikai Guan, Mark W. Rainforth and Beverley J. Inkson
Type: Article | 2019 | Item not available on this server.

Keyhole-induced porosities in Laser-based Powder Bed Fusion (L-PBF) of Ti6Al4V: High-fidelity modelling and experimental validation - Mohamad Bayat, Aditi Thanki, Sankhya Mohanty, Ann Witvrouw, Shoufeng Yang, Jesper Thorborg, Niels Skat Tiedje and Jesper Henri Hattel
Type: Article | 2019

Effect of spark plasma sintering and high-pressure torsion on the microstructural and mechanical properties of a Cu–SiC composite - P. Bazarnik, S. Nosewicz, B. Romelczyk-Baishya, M. Chmielewski, A. Strojny Nędza, J. Maj, Y. Huang, M. Lewandowska and T. G. Langdon
Type: Article | 2019

A computational approach to design new tests for viscoplasticity characterization at high strain-rates - Pascal Bouda, Bertrand Langrand, Delphine Notta-Cuvier, Eric Markiewicz and Fabrice Pierron
Type: Article | 2019 | Item not available on this server.

Self-assembly of a robust hydrogen-bonded octylphosphonate network on cesium lead bromide perovskite nanocrystals for light-emitting diodes - Alasdair A.M. Brown, Thomas Hooper, Sjoerd Veldhuis, Xin Yu Chin, Annalisa Bruno, Parth Vashishtha, Ju Nie Tey, Liudi Jiang, Bahulayan Damodaran, Suan-Hui Pu, Subodh Mhaisalkar and Nripan Mathews
Type: Article | 2019 | Item availability restricted.

Type: Article | 2019

A comparison of warm and combined warm and low‐temperature processing routes for the equal‐channel angular pressing of pure titanium - Asli Günay Bulutsuz, Witold Chrominski, Yi Huang, Petr Kral, Mehmet Emin Yurci, Malgorzata Lewandowska and Terence G. Langdon
Type: Article | 2019

A magnesium-aluminium composite produced by high-pressure torsion - Moara M. Castro, S. Sabbaghianrad, Pedro Henrique R. Pereira, Eric M. Mazzer, Augusta Isaac, Terence G. Langdon and Roberto B. Figueiredo
Type: Article | 2019

Microstructures and hardness prediction of an ultrafine-grained Al-2024 alloy - Ying Chen, Yuanchen Tang, Houan Zhang, Nan Hu, Nong Gao and Marco J. Starink
Type: Article | 2019

A possible stabilizing effect of work hardening on the tensile performance of superplastic materials - Nguyen Q. Chinh, Gergely Rácz, Jenő Gubicza, Ruslan Z. Valiev and Terence G. Langdon
Type: Article | 2019 | Item not available on this server.

Correlative X-ray and neutron tomography of root systems using cadmium fiducial markers - Thomas, James Clark, Genoveva Burca, Richard Boardman and Thomas Blumensath
Type: Article | 2019

Hot photons and open-circuit voltage in molecular absorbers - Branislav Dzurňák, Tianxian Feng, Lefteris Danos and Tomas Markvart
Type: Article | 2019

Verification of the use of Micro-CT scanning to assess the features of entire squat type defects - Shaun Earl, Kathryn E. Rankin, Roger Lewis, Lindsey Smith and W. Mark Rainforth
Type: Article | 2019

Type: Article | 2019

Omega phase strengthened 1.2GPa metastable beta titanium alloy with high ductility - Junheng Gao, Alexander J. Knowles, Dikai Guan and W. Mark Rainforth
Type: Article | 2019 | Item not available on this server.

Type: Article | 2019

Type: Article | 2019 | Item not available on this server.

Exploring the mechanism of “Rare Earth” texture evolution in a lean Mg–Zn–Ca alloy - Dikai Guan, Xingguang Liu, Junheng Gao, Le Ma, Bradley Wynne and W Mark Rainforth
Type: Article | 2019 | Item not available on this server.

Basal slip mediated tension twin variant selection in magnesium WE43 alloy - Dikai Guan, Bradley Wynne, Junheng Gao, Yuhe Huang and W. Mark Rainforth
Type: Article | 2019 | Item not available on this server.

Type: Article | 2019

Synthesis of a bulk nanostructured metastable Al alloy with extreme supersaturation of Mg - Jae-Kyung Han, Klaus-Dieter Liss, Terence G. Langdon and Megumi Kawasaki
Type: Article | 2019

Bulk-State Reactions and Improving the Mechanical Properties of Metals through High-Pressure Torsion - Jae-kyung Han, Jae-il Jang, Terence G. Langdon and Megumi Kawasaki
Type: Article | 2019 | Item availability restricted.

Additive manufacturing of high-strength crack-free Ni-based Hastelloy X superalloy - Quanquan Han, Yuchen Gu, Rossitza Setchi, Franck Lacan, Richard Johnston, Sam L. Evans and Shoufeng Yang
Type: Article | 2019 | Item not available on this server.

An investigation of the thermal stability of an MgDy alloy after processing by high-pressure torsion - Abdelkader Hanna, Hiba Azzeddine, Yi Huang, Djamel Bradai, Jose Maria Cabrera and Terence G Langdon
Type: Article | 2019

Type: Article | 2019

Homogeneous anodic TiO2 nanotube layers on Ti6Al4V alloy with improved adhesion strength and corrosion resistance - Nan Hu, Tao Hu, Ang Gao, Nong Gao, Marco J. Starink, Ying Chen, Wanting Sun, Qing Liao, Liping Tong, Xiaochang Xu, Paul K. Chu and Huaiyu Wang
Type: Article | 2019 | Item not available on this server.

Structure, mechanical and tribological properties of Mo-S-N solid lubricant coatings - Tomáš Hudec, Marián Mikula, Leonid Satrapinskyy, Tomáš Roch, Martin Truchlý, Peter Švec, Teodor Huminiuc and Tomáš Polcar
Type: Article | 2019 | Item not available on this server.

Influence of carbon nanoparticle addition (and impurities) on selective laser melting of pure copper - Suraj Dinkar Jadhav, Sasan Dadbakhsh, Jozef Vleugels, Johan Hofkens, Peter Van Puyvelde, Shoufeng Yang, Jean-Pierre Kruth, Jan Van Humbeeck and Kim Vanmeensel
Type: Article | 2019

Synergistic antitumour potency of a self-assembling peptide hydrogel for the local co-delivery of doxorubicin and curcumin in the treatment of head and neck cancer - Christina Karavasili, Dimitrios A. Andreadis, Orestis L. Katsamenis, Emmanuel Panteris, Pinelopi Anastasiadou, Zacharias Kakazanis, Vasilis Zoumpourlis, Catherine K. Markopoulou, Sotirios Koutsopoulos, Ioannis S. Vizirianakis and Dimitrios G. Fatouros
Type: Article | 2019

X-ray micro-computed tomography for nondestructive three-dimensional (3D) x-ray histology - Orestis L Katsamenis, Michael Olding, Jane A Warner, David S Chatelet, Mark G Jones, Giacomo Sgalla, Bennie Smit, Oliver J Larkin, Ian Haig, Luca Richeldi, Ian Sinclair, Peter M Lackie and Philipp Schneider
Type: Article | 2019

Full-field surface pressure reconstruction using the virtual fields method - Rene Kaufmann, Bharathram Ganapathisubramani and Fabrice Pierron
Type: Article | 2019

Type: Article | 2019 | Item availability restricted.

The characteristics of creep in metallic materials processed by severe plastic deformation - Petr Kral, Jiri Dvorak, Vaclav Sklenicka and Terence G. Langdon
Type: Article | 2019 | Item availability restricted.

Type: Article | 2019

Effect of high-pressure torsion on corrosion behavior of a solution-treated Al-Mg-Sc alloy in a saline solution - Michelle Dias Alves Lage, Renata Braga Soares, Pedro Henrique R. Pereira, Roberto B. Figueiredo, Vanessa Freitas C. Lins and Terence G. Langdon
Type: Article | 2019

Type: Article | 2019 | Item availability restricted.

Type: Article | 2019

Imaging techniques for observing laminar geometry in the feather shaft cortex - Christian Laurent, Sharif Ahmeds, Richard Boardmans, Richard Cook, Gareth Dyke, Colin Palmer, Phillip Schneiders and Roeland De Kat
Type: Article | 2019 | Item availability restricted.

Material characterization, thermal analysis, and mechanical performance of a laser-polished Ti alloy prepared by selective laser melting - Yu-hang Li, Bing Wang, Cheng-peng Ma, Zhi-hao Fang, Long-fei Chen, Ying-chun Guan and Shoufeng Yang
Type: Article | 2019

Surfactant-free electroless codeposition of Ni–P–MoS2/Al2O3 composite coatings - Ping Liu, Yongwei Zhu, Gaoyan Zhong, Xiao Zhao, Shuncai Wang and Shoufeng Yang
Type: Article | 2019

Cytotoxicity and corrosion behavior of magnesium and magnesium alloys in Hank's Solution after processing by high-pressure torsion - Debora R. Lopes, Claudio L.P. Silva, Renata B. Soares, Pedro Henrique R. Pereira, Ana Celeste Oliveira, Roberto B. Figueiredo, Terence G. Langdon and Vanessa F.C. Lins
Type: Article | 2019

Type: Article | 2019

Silicon photosensitisation using molecular layers - Tomas Markvart, Lefteris Danos, Nathan Halcovitch, Ben Wook, Henry Banks, Michael Coogan, Nicholas Alderman, Liping Fang and Branislav Dzurnak
Type: Article | 2019

Type: Article | 2019 | Item not available on this server.

Review of the quench sensitivity of aluminium alloys: analysis of the kinetics and nature of quench-induced precipitation - Benjamin Milkereit, Marco J. Starink, Paul A. Rometsch, Christoph Schick and Olaf Kessler
Type: Article | 2019

Behaviour of 3D printed PLA and PLA-PHA in marine environments - G R Montalvao, Mohamed Moshrefi-Torbati, Andrew Hamilton, R. Machado, A Joao, C. Silva and S Sampaio
Type: Article | 2019

Type: Article | 2019

Development of chitosan/gelatin hydrogels incorporation of biphasic calcium phosphate nanoparticles for bone tissue engineering - Lei Nie, Qiaoyun Wu, Haiyue Long, Kehui Hu, Pei Li, Can Wang, Meng Sun, Jing Dong, Xiaoyan Wei, Jinping Suo, Dangling Hua, Shiliang Liu, Hongyu Yuan and Shoufeng Yang
Type: Article | 2019 | Item not available on this server.

Lithium titanate/pyrenecarboxylic acid decorated carbon nanotubes hybrid - Alginate gel supercapacitor - Manoranjan Ojha, James Le Houx, Radha Mukkabla, Denis Kramer, Richard George Andrew Wills and Melepurath Deepa
Type: Article | 2019 | Item not available on this server.

Type: Article | 2019

Type: Article | 2019

In situ statistical measurement of local morphology in carbon-epoxy composites using synchrotron X-ray computed tomography - Sebastian Rosini, Mark N. Mavrogordato, Olga Egorova, Emily S. Matthews, Samuel E. Jackson, S. Mark Spearing and Ian Sinclair
Type: Article | 2019

Microstructured hybrid scaffolds for aligning neonatal rat ventricular myocytes - Ilaria Sanzari, F. Dinelli, Eleanor Humphrey and Themis Prodromakis
Type: Article | 2019

The effects of voids in quasi-static indentation of resin-infused reinforced polymers - S.M. Sisodia, Daniel Bull, A.R. George, E.K. Gamstedt, Mark Mavrogordato, D.T. Fullwood and Mark Spearing
Type: Article | 2019

Characterisation of 3D printed sand moulds using micro-focus X-ray computed tomography - Tharmalingam Sivarupan, Mohamed El Mansori, Keith Daly, Mark Noel Mavrogordato and Fabrice Pierron
Type: Article | 2019 | Item availability restricted.

Effect of lubrication on friction and wear properties of PEEK with steel counterparts - Go Tatsumi, Monica Ratoi, Yuji Shitara, Kiyomi Sakamoto and Brian Mellor
Type: Article | 2019

Thermal stability of an Mg-Nd alloy processed by high-pressure torsion - Samia Tighiouaret, Rabeb Lachhab, Abdelkader Hanna, Hiba Azzeddine, Yi Huang, Thierry Baudin, Anne-Laure Helbert, Francois Brisset, Djamel Bradai and Terence G Langdon
Type: Article | 2019

Electrochemical behavior of a magnesium ZK60 alloy processed by high-pressure torsion - Hamidreza Torbati-Sarraf, Seyed Alireza Torbati-Sarraf, Amir Poursaee and Terence G. Langdon
Type: Article | 2019

Formation of surface deposits on steel and titanium aviation fuel tubes under real operating conditions - Igor Velkavrh, Ion Palamarciuc, Dan Gelu Galuşcǎ, Alexander Diem, Josef Brenner, Christoph Gabler, Brian Mellor and Monica Ratoi
Type: Article | 2019

Selective Laser Melting process optimization of Ti–Mo–TiC metal matrix composites - Bey Vrancken, Sasan Dadbakhsh, Raya Mertens, Kim Vanmeensel, Jef Vleugels, Shoufeng Yang and Jean-pierre Kruth
Type: Article | 2019 | Item not available on this server.

Effect of alloying elements on magnesium alloy damping capacities at room temperature - Di qing Wan, Ying lin Hu, Shu ting Ye, Zhu min Li, Li li Li and Yi Huang
Type: Article | 2019

Type: Article | 2019

Experimental characterization of a chip-level 3-D printed microjet liquid impingement cooler for high-performance systems - Tiwei Wei, Herman Oprins, Vladimir Cherman, Shoufeng Yang, Ingrid De Wolf, Eric Beyne and Martine Baelmans
Type: Article | 2019 | Item not available on this server.

High-density tungsten fabricated by selective laser melting: Densification, microstructure, mechanical and thermal performance - Shifeng Wen, Chong Wang, Yan Zhou, Longchen Duan, Qingsong Wei, Shoufeng Yang and Yusheng Shi
Type: Article | 2019 | Item not available on this server.

Micro-embossing formability of a superlight dual-phase Mg-Li alloy processed by high-pressure torsion - Jie Xu, Qian Sui, Chenxi Wang, Xinwei Wang, Debin Shan, Bin Guo and Terence G. Langdon
Type: Article | 2019

Compression–compression fatigue behaviour of gyroid-type triply periodic minimal surface porous structures fabricated by selective laser melting - Lei Yang, Chunze Yan, Wenchao Cao, Zhufeng Liu, Bo Song, Shifeng Wen, Cong Zhang, Yusheng Shi and Shoufeng Yang
Type: Article | 2019

Deformation-controlled design of metallic nanocomposites - Hakan Yavas, Alberto Fraile, Teodor Huminiuc, Huseyin Sener Sen, Emilio Frutos and Tomas Polcar
Type: Article | 2019

Exploring correlations between properties using artificial neural networks - Yiming Zhang, Julian R. G. Evans and Shoufeng Yang
Type: Article | 2019

Thermal characteristics analysis and error prediction for lubricated multi-link high-speed precision presses - Enlai Zheng, Yuanzhao Yang, Zhaohui Peng, Yue Zhu, Xiao Zhao, Xiangze Lin and Min Kang
Type: Article | 2019 | Item not available on this server.

Type: Article | 2019

Nanocomposite-coated porous templates for engineered bone scaffolds: A parametric study of layer-by-layer assembly conditions - Monika Ziminska, Marine J. Chalanqui, Philip Chambers, Jonathan Acheson, Helen McCarthy, Nicholas Dunne and Andrew Hamilton
Type: Article | 2019

Magnesium-based bioactive composites processed at room temperature - Moara M. de Castro, Debora R. Lopes, Renata B. Soares, Diogo M.M. dos Santos, Eduardo H.M. Nunes, Vanessa F.C. Lins, Pedro Henrique R. Pereira, Augusta C. Isaac Neta, Terence G. Langdon and Roberto Figueiredo
Type: Article | 2019

Book Section

Chapter 1 - High-pressure torsion and equal-channel angular pressing - Irina P. Semenova, Ruslan Z. Valiev and Terence Langdon
Type: Book Section | 2019 | Elsevier | Item availability restricted.

Conference or Workshop Item

Room temperature amine-free synthesis of phosphonate-capped CsPbBr3 nanocrystals for LED applications - Alasdair, Angus Macintyre Brown, Xin Yu Chin, Thomas Hooper, Parth Vashishtha, Annalisa Bruno, Nur Fadilah Jamaludin, Suan-Hui Pu, Liudi Jiang, Ju Nie Tey, Bahulayan Damodaran, Nripan Mathews and Subodh Mhaisalkar
Type: Conference or Workshop Item | 2019 | Item not available on this server.

Photonic metamaterials mechanically re-configurable at nanoscale via liquid crystals - Oleksandr Buchnev, Nina Podoliak, Malgosia Kaczmarek, Liudi Jiang and Vassili Fedotov
Type: Conference or Workshop Item | 2019

Type: Conference or Workshop Item | 2019 | IEEE | Item not available on this server.

Development of 3-D printed silica preforms - Angeles Camacho Rosales, Martin Miguel Angel Núñez-Velázquez, Xiao Zhao, Shoufeng Yang and Jayanta Sahu
Type: Conference or Workshop Item | 2019 | OSA | Item not available on this server.

Corroborating µCT and histological data to provide novel insight into the biological response to cochlear implantation at the electrode-tissue interface - Katie Hough, Alan Sanderson, Lucy Anderson, Orestis L. Katsamenis, Guillaume Tourrel, Carl Verschuur and Tracey Newman
Type: Conference or Workshop Item | 2019

Type: Conference or Workshop Item | 2019 | Springer | Item not available on this server.

Assessment of the synergistic antitumour potency of novel drug formulations by means of 3d x-ray histology - Orestis L. Katsamenis, Christina Karavasili and Dimitrios G. Fatouros
Type: Conference or Workshop Item | 2019 | Item not available on this server.

3D X-ray histology for biomedical applications at the University of Southampton: Get involved, Get in touch! - Orestis L. Katsamenis, Elena Konstantinopoulou, Philip Basford, Jane A. Warner, Oliver J. Larkin, Bennie Smit, Ian Haig, Simon J. Cox, Ian Sinclair, Anton M. Page, Peter M. Lackie and Philipp Schneider
Type: Conference or Workshop Item | 2019 | Item not available on this server.

Mapping 3d networks and cells in human lung tissue using micro-Computed Tomography and immunofluorescence - M.J. Lawson, O.L. Katsamenis, M. Olding, O.J. Larkin, B. Smit, I.G. Haig, P. Schneider, P.M. Lackie and J.A. Warner
Type: Conference or Workshop Item | 2019 | Item not available on this server.

Multi-modal research imaging data management at University Hospital Southampton - Neil O'Brien, James Leighs, Orestis L. Katsamenis, Philip J. Basford, Philipp Schneider, Peter Lackie, Simon Cox, Martin Burke, Sofia Michopoulou, Angela Darekar and Matthew Guy
Type: Conference or Workshop Item | 2019

Why every hospital should have a micro-CT: 3D x-ray histology, let’s go beyond standard 2D histology - Philipp Schneider, Orestis Katsamenis, Gareth Thomas, Anton M. Page, Simon Cox, Ian Sinclair and Peter Lackie
Type: Conference or Workshop Item | 2019 | Item not available on this server.

Image-based stress field reconstruction in complex media - R. Seghir, F. Pierron and L. Fletcher
Type: Conference or Workshop Item | 2019 | Springer | Item not available on this server.

Monograph

A Manual for Conducting Image-Based Inertial Impact (IBII) Tests - Lloyd Fletcher, Jared Van Blitterswyk and Fabrice Pierron
Type: Monograph | 2019 | University of Southampton

Modernising composite materials regulations: Structural approval procedure for marine structures - Simon Quinn, Yikun Wang, Andrew MacDonald, Mayur Jogia, Ole Thomsen and Janice Barton
Type: Monograph | 2019 | University of Southampton | Item not available on this server.

Thesis

Type: Thesis | 2019 | University of Southampton

Type: Thesis | 2019 | University of Southampton

Type: Thesis | 2019 | University of Southampton

Dataset

Type: Dataset | 2019 | Zenodo | Item not available on this server.

Type: Dataset | 2019 | Zenodo | Item not available on this server.

Type: Dataset | 2019 | University of Southampton

Type: Dataset | 2019 | University of Southampton

Type: Dataset | 2019 | University of Southampton

Type: Dataset | 2019 | University of Southampton

Type: Dataset | 2019 | University of Southampton

Type: Dataset | 2019 | Zenodo | Item not available on this server.

Type: Dataset | 2019 | Zenodo | Item not available on this server.

Type: Dataset | 2019 | Zenodo | Item not available on this server.

Type: Dataset | 2019 | Zenodo | Item not available on this server.

Type: Dataset | 2019 | Zenodo | Item not available on this server.

Type: Dataset | 2019 | Zenodo | Item not available on this server.

Type: Dataset | 2019 | University of Southampton

Type: Dataset | 2019 | University of Southampton

Review

Synthesis of hybrid nanocrystalline alloys by mechanical bonding through high-pressure torsion - Jae-Kyung Han, Taylor Herndon, Jae Il Jang, Terence G. Langdon and Megumi Kawasaki
Type: Review | 2019

Review—Beyond the highs and lows: A perspective on the future of dielectrics research for nanoelectronic devices - Melanie Jenkins, Dustin Austin, John Conley Jr, Junqing Fan, C.H. De Groot, Liudi Jiang, Ye Fan, Rizwan Ali, Gargi Ghosh, Marius Orlowski and Sean W. King
Type: Review | 2019

Review: The impact of metal additive manufacturing on the aerospace industry - Shahir Yasin Bin Mohd Yusuf, Samuel Cutler and Nong Gao
Type: Review | 2019

Meeting abstract

Type: Meeting abstract | 2019

This list was generated on Tue Mar 26 01:58:36 2024 GMT.
Atom RSS 1.0 RSS 2.0

Contact ePrints Soton: eprints@soton.ac.uk

ePrints Soton supports OAI 2.0 with a base URL of http://eprints.soton.ac.uk/cgi/oai2

This repository has been built using EPrints software, developed at the University of Southampton, but available to everyone to use.

We use cookies to ensure that we give you the best experience on our website. If you continue without changing your settings, we will assume that you are happy to receive cookies on the University of Southampton website.

×