Items where Division is "Faculties (pre 2018 reorg) > Faculty of Engineering and the Environment (pre 2018 reorg) > Mechanical Engineering (pre 2018 reorg) > Engineering Mats & Surface Engineerg Gp (pre 2018 reorg)
Current Faculties > Faculty of Engineering and Physical Sciences > School of Engineering > Mechanical Engineering > Mechanical Engineering (pre 2018 reorg) > Engineering Mats & Surface Engineerg Gp (pre 2018 reorg)
Mechanical Engineering > Mechanical Engineering (pre 2018 reorg) > Engineering Mats & Surface Engineerg Gp (pre 2018 reorg)" and Year is 2008
 | Up a level |
Number of items: 140.
A
Developing pulse phase thermography as a characterization tool for grossly sculpted surfaces - K.C. Ang, R.J.K. Wood, L. Wang, J.M. Dulieu-Barton, B.G.I. Dance and A.L. Buxton
Type: Article
| 2008
| Item not available on this server.
Sonic brushing and the delivery of fluoride through Streptococcus mutans biofilms - M. Aspiras, P. Stoodley and M. de Jager
Type: Article
| 2008
| Item not available on this server.
3D heterogeneous stiffness reconstruction using MRI and the Virtual Fields Method - S. Avril, J.M. Huntley, F. Pierron and D.D. Steele
Type: Article
| 2008
| Item not available on this server.
Overview of identification methods of mechanical parameters based on full-field measurements - Stéphane Avril, Marc Bonnet, Anne-Sophie Bretelle, Michel Grédiac, François Hild, Patrick Ienny, Félix Latourte, Didier Lemosse, Stéphane Pagano, Emmanuel Pagnacco and Fabrice Pierron
Type: Article
| 2008
| Item not available on this server.
Identification of viscoplastic parameters and characterization of Lüders behaviour using digital image correlation and the virtual fields method - Stéphane Avril, Fabrice Pierron, Michael A. Sutton and Junhui Yan
Type: Article
| 2008
B
An assessment of the process capabilities of nanoimprint lithography - Tobias Balla, S. Mark Spearing and Andrew Monk
Type: Article
| 2008
| Item not available on this server.
Influence of stacking-fault energy on microstructural characteristics of ultrafine-grain copper and copper-zinc alloys - Levente Balogh, Tamás Ungár, Yonghao Zhao, Y.T. Zhu, Zenji Horita, Cheng Xu and Terence G. Langdon
Type: Article
| 2008
| Item not available on this server.
An aqueous, alkaline route to titanate nanotubes under atmospheric pressure conditions - D.V. Bavykin, B.A. Cressey, M.E. Light and F.C. Walsh
Type: Article
| 2008
| Item availability restricted.
In situ observation of the water distribution across a PEFC using high resolution neutron radiography - P. Boilat, D. Kramer, B.C. Seyfang, G. Frei, E. Lehmann, G. Scherer, A. Wokaun, Y. Ichikawa, Y. Tasaki and K. Shinohara
Type: Article
| 2008
| Item not available on this server.
The feasibility of using electrostatic charge condition monitoring for lubricant additive screening - James Edward Booth
Type: Thesis
| 2008
C
Practical aspects of developing a natural product based marine antifouling coating system - L.D. Chambers, C. Helio, K.R. Stokes, F.C. Walsh and R.J.K. Wood
Type: Conference or Workshop Item
| 2008
| Item not available on this server.
Biomimetic inspired marine antifouling coating system assessed using electrochemical techniques - L.D. Chambers, R.J.K. Wood, F.C. Walsh and K.R. Stokes
Type: Conference or Workshop Item
| 2008
| Item not available on this server.
The development of a marine antifouling system using environmentally acceptable and naturally occurring products - Lily D. Chambers
Type: Thesis
| 2008
| University of Southampton
Heat transfer and flow behaviour of aqueous suspensions of titanate nanotubes (nanofluids) - Haisheng Chen, Wei Yang, Yurong He, Yulong Ding, Lingling Zhang, Chunqing Tan, Alexei A. Lapkin and Dmitry V. Bavykin
Type: Article
| 2008
| Item not available on this server.
Nanofabrication of SiC templates for direct hot embossing for metallic photonic structures and meta materials - Yifang Chen, Yun Zhou, Genhua Pan, Ejaz Huq, Bing-Rui Lu, Shen-Qi Xie, Jing Wan, Zhen Shu, Xin-Ping Qu, Ran Liu, S. Banu, S.W. Birtwell and Liudi Jiang
Type: Article
| 2008
| Item not available on this server.
Effect of pre-aging on the microstructure and strength of supersaturated AlZnMg alloys processed by ECAP - N.Q. Chinh, J. Gubicza, T. Czeppe, J. Lendvai, Z. Hegedős, Cheng Xu and Terence G. Langdon
Type: Article
| 2008
| Item not available on this server.
Supervisory data acquisition and performance analysis of a PV Array installation with data logger - S. Chowdhury, P. Day, S.P. Chowdhury, T. Markvart and Y.H. Song
Type: Conference or Workshop Item
| 2008
| IEEE
| Item not available on this server.
Texture evolution in an aluminum alloy processed by ECAP with concurrent precipitate fragmentation - Sandip Ghosh Chowdhury, Cheng Xu and Terence G. Langdon
Type: Article
| 2008
| Item not available on this server.
Practical challenges in formulating virtual tests for structural composites - Brian N. Cox, S. Mark Spearing and Daniel R Mumm
Type: Conference or Workshop Item
| 2008
| Springer
| Item not available on this server.
D
Ultra-thin silicon solar cell: modelling and characterisation - L. Danos, G. Jones, R. Greef and T. Markvart
Type: Article
| 2008
| Item not available on this server.
Efficient fluorescence quenching near crystalline silicon from Langmuir–Blodgett dye films - Lefteris Danos, Robert Greef and Tomas Markvart
Type: Article
| 2008
| Item availability restricted.
E
Temperature and dwell dependence of fatigue crack propagation in various heat treated turbine disc alloys - S. Everitt, M.J. Starink and P.A.S. Reed
Type: Conference or Workshop Item
| 2008
| The Minerals, Metals and Materials Society
| Item not available on this server.
F
Achieving superplastic behavior in fcc and hcp metals processed by equal-channel angular pressing (In special issue: Mechanical Behavior of Nanostructured Materials, a Symposium Held in Honor of Carl Koch at the TMS Annual Meeting 2007, Orlando, Florida) - Roberto B. Figueiredo, Megumi Kawasaki, Cheng Xu and Terence G. Langdon
Type: Article
| 2008
| Item not available on this server.
Developing superplasticity in a magnesium AZ31 alloy by ECAP - Roberto B. Figueiredo and Terence G. Langdon
Type: Article
| 2008
| Item not available on this server.
Influence of number of passes in ECAP on superplastic behavior in a magnesium alloy - Roberto B. Figueiredo and Terence G. Langdon
Type: Article
| 2008
| Item not available on this server.
Record superplastic ductility in a magnesium alloy processed by equal-channel angular pressing - Roberto B. Figueiredo and Terence G. Langdon
Type: Article
| 2008
| Item not available on this server.
Developing superplasticity in metallic alloys through the application of severe plastic deformation - Robertp B. Figueiredo, Megumi Kawasaki and Terence G. Langdon
Type: Conference or Workshop Item
| 2008
| Trans Tech Publications
| Item not available on this server.
Type: Article
| 2008
| Item not available on this server.
Non-linear thermal response of sandwich panels with a flexible core and temperature dependent mechanical properties - Y. Frostig and O.T. Thomsen
Type: Article
| 2008
| Item not available on this server.
The effects of manifold flow on mass transport in electrochemical filter-press reactors - Á. Frías-Ferrer, J. González-García, V. Sáez, C. Ponce de León and F.C. Walsh
Type: Article
| 2008
| Item availability restricted.
Anisotropic, effective diffusivity of porous gas diffusion layer materials for PEFC - Reto Fückiger, Freunberger, Denis Kramer, Alexander Wokaun, Günther . Scherer and Felix N. Büchi
Type: Article
| 2008
| Item not available on this server.
G
Type: Article
| 2008
Adsorption of rhodamine 6G at the water-air interface - R. Greef, J.G. Frey, J. Robinson and L. Danos
Type: Article
| 2008
| Item availability restricted.
Microstructure and mechanical behavior of severely deformed f.c.c. metals - J. Gubicza, S. Dobatkin, N.Q. Chinh and T.G. Langdon
Type: Article
| 2008
| Item not available on this server.
Delayed microstructural recovery in silver processed by equal-channel angular pressing - Jenő Gubicza, Nguyen Q. Chinh, János L. Lábár, Zoltán Hegedüs, Péter Szommer, Géza Tichy and Terence G. Langdon
Type: Article
| 2008
| Item not available on this server.
Microstructure and yield strength of severely deformed silver - Jenő Gubicza, Nguyen Q. Chinh, János L. Lábár, Zoltán Hegedüs, Cheng Xu and Terence G. Langdon
Type: Article
| 2008
| Item not available on this server.
H
Characterization of biofilm matrix, degradation by DNase treatment and evidence of capsule downregulation in Streptococcus pneumoniae clinical isolates - Luanne Hall-Stoodley, Laura Nistico, Karthik Sambanthamoorthy, Bethany Dice, Duc Nguyen, William J. Mershon, Candice Johnson, Fan Ze Hu, Paul Stoodley, Garth D. Ehrlich and J. Christopher Post
Type: Article
| 2008
| Item not available on this server.
Microstructural and mechanical characteristics of an AZ61 magnesium alloy processed by high pressure torsion - Yosuke Harai, Masaaki Kai, Kenji Kaneko, Zenji Horita and Terence G. Langdon
Type: Article
| 2008
| Item not available on this server.
Achieving exceptional superplasticity in a bulk aluminum alloy processed by high-pressure torsion - Zenji Horita and Terence G. Langdon
Type: Article
| 2008
| Item not available on this server.
K
Developing grain refinement and superplasticity in a magnesium alloy processed by high-pressure torsion - Masaaki Kai, Zenji Horita and Terence G. Langdon
Type: Article
| 2008
| Item not available on this server.
Characterization of creep properties and creep textures in pure aluminum processed by equal-channel angular pressing - Megumi Kawasaki, Irene J. Beyerlein, Sven C. Vogel and Terence G. Langdon
Type: Article
| 2008
| Item not available on this server.
The development of internal cavitation in a superplastic zinc-aluminum alloy processed by ECAP - Megumi Kawasaki and Terence G. Langdon
Type: Article
| 2008
| Item not available on this server.
Grain boundary sliding in a superplastic zinc-aluminum alloy processed using severe plastic deformation - Megumi Kawasaki and Terence G. Langdon
Type: Article
| 2008
| Item not available on this server.
The significance of strain reversals during processing by high-pressure torsion - Megumi Kawasaki and Terence G. Langdon
Type: Article
| 2008
| Item not available on this server.
Extending the flow in high-temperature creep to materials with ultrafine grain sizes - Megumi Kawasaki, Cheng Xu and Terence Langdon
Type: Conference or Workshop Item
| 2008
| TMS
| Item not available on this server.
Microstructure and strength modelling of Al-Cu-Mg alloys during non-isothermal treatments: part 1 – controlled heating and cooling - I.N. Khan and M.J. Starink
Type: Article
| 2008
Microstructure and strength modelling of Al-Cu-Mg alloys during non-isothermal treatments: part 2 - Welds - I.N. Khan, M.J. Starink, I. Sinclair and S.C. Wang
Type: Article
| 2008
A model for precipitation kinetics and hardening in Al-Cu-Mg alloys - I.N. Khan, M.J. Starink and J.L. Yan
Type: Article
| 2008
Development of nanostructures for thermoelectric microgenerators using ion-track lithography - E. Koukharenko, X. Li, I.S. Nandhakumar, B. Schiedt, C. Trautmann, J. Speed, M.J. Tudor, S.P. Beeby and N.M. White
Type: Article
| 2008
| Item availability restricted.
Electrochemical diffusimetry of fuel cell gas diffusion layers - Denis Kramer, Stefan A. Freunberger, Reto Flückiger, Ingo A. Schneider, Alexander Wokaun, Felix N. Büchi and Günther G. Scherer
Type: Article
| 2008
| Item not available on this server.
Type: Article
| 2008
| Item not available on this server.
L
Proceso de materiales ultrafino-granulosos usando la deformación plástica severa: potencial para alcanzar características excepcionales - T.G. Langdon
Type: Article
| 2008
| Item not available on this server.
Enhanced superplasticity in a magnesium alloy processed by equal-channel angular pressing with a back-pressure - R. Lapovok, Y. Estrin, M.V. Popov and T.G. Langdon
Type: Article
| 2008
| Item not available on this server.
Directive millimetrewave antennas using freeformed ceramic metamaterials in planar and cylindrical forms - Yoonjae Lee, Xuesong Lu, Yang Hao, Shoufeng Yang, J. Evans and C.G. Parini
Type: Conference or Workshop Item
| 2008
| IEEE
| Item not available on this server.
Type: Thesis
| 2008
Large-scale synthesis of Al–Cu–Fe submicron quasicrystals - L. Li, Q. Bi, J. Yang, L. Fu, L. Wang, S. Wang and W. Liu
Type: Article
| 2008
Fabrication of electromagnetic crystals by extrusion freeforming - Xuesong Lu, Yoonjae Lee, Shoufeng Yang, Yang Hao, Rick Ubic, Julian R.G. Evans and Clive G. Parini
Type: Article
| 2008
| Item not available on this server.
Type: Article
| 2008
| Item not available on this server.
M
Biofilms in nephrology - Richard J. Marcus, J. Christopher Post, Paul Stoodley, Luanne Hall-Stoodley, Rita L. McGill, Kalathil K. Sureshkumar and Vikram Gahlot
Type: Article
| 2008
| Item not available on this server.
Bring me sunshine - T. Markvart
Type: Art Design Item
| 2008
| BBC Radio 4
| Item not available on this server.
The thermodynamics of optical étendue - T. Markvart
Type: Article
| 2008
Type: Article
| 2008
| Item not available on this server.
Solar electricity for the third millenium - Tom Markvart
Type: Conference or Workshop Item
| 2008
| Item not available on this server.
Thermodynamic concepts in quantum solar energy conversion - Tom Markvart
Type: Conference or Workshop Item
| 2008
| Item not available on this server.
Combined non-destructive-evaluation of cement shrinkage effects in a total hip replacement model - Mark N. Mavrogordato, Mark Taylor, Andrew Taylor and Martin Browne
Type: Conference or Workshop Item
| 2008
| Item not available on this server.
Micromechanisms of damage in 0° splits in a [90/0]s composite material using synchrotron radiation computed tomography - Andrew J. Moffatt, Peter Wright, Jean-Yves Buffière, Ian Sinclair and Simon Mark Spearing
Type: Article
| 2008
| Item not available on this server.
Copper coating of carbon steel by a furnace brazing process using brass as the braze - F. Molleda, J. Mora, J.R. Molleda, E. Carrillo, E. Mora and B.G. Mellor
Type: Article
| 2008
Direct observation and analysis of failure initiation and crack progression in tear toughness of two Al sheet alloys - T.F. Morgeneyer, I. Sinclair, J. Besson and M.J. Starink
Type: Conference or Workshop Item
| 2008
| Wiley-VCH Verlag
| Item not available on this server.
Evolution of voids during ductile crack propagation in an aluminium alloy sheet toughness test studied by synchrotron radiation computed tomography - T.F. Morgeneyer, M.J. Starink and I. Sinclair
Type: Article
| 2008
Quench sensitivity of toughness in an Al alloy: direct observation and analysis of failure initiation at the precipitate free zone - T.F. Morgeneyer, M.J. Starink, S.C. Wang and I. Sinclair
Type: Article
| 2008
Micromechanical studies and modelling of toughness in high
strength aluminium alloys - Thilo F Morgeneyer
Type: Thesis
| 2008
N
Determination of the effective thickness of a porous electrode in a flow-through reactor; effect of the specific surface area of stainless steel fibres, used as a porous cathode during the deposition of Ag(I) ions. - J.L. Nava, M.T. Oropeza, C. Ponce de León, J. González-García and A.J. Frías-Ferrer
Type: Article
| 2008
The study of aluminium anodes for high power density
Al/Air batteries with brine electrolytes - Maria Nestoridi, Derek Pletcher, Shuncai Wang, Richard L. Jones, Keith R. Stokes and Ian Wilcock
Type: Article
| 2008
| Item not available on this server.
The scaling of strength in the design of high-power MEMS structures - Erin E Noonan, Yoav Peles, Christopher S. Protz and Simon Mark Spearing
Type: Article
| 2008
| Item not available on this server.
P
Effects of microstructure on room temperature fatigue crack initiation and short crack propagation in Udimet 720Li Ni-base superalloy - H.T. Pang and P.A.S. Reed
Type: Article
| 2008
A novel flow battery — a lead-acid battery based on an electrolyte with soluble lead(II): part VI. Studies of the lead dioxide positive electrode - Derek Pletcher, Hantao Zhou, Gareth Kear, C.T. John Low, Frank C. Walsh and Richard G.A. Wills
Type: Article
| 2008
| Item not available on this server.
Conducting polymer coatings in electrochemical technology: part 2 – application areas. - Carlos Ponce de Leon, Sheelagh Campbell, James Smith and Frank Walsh
Type: Article
| 2008
A direct borohydride–peroxide fuel cell using a Pd/Ir alloy coated microfibrous carbon cathode - C. Ponce de León, F.C. Walsh, C.J. Patrissi, M.G. Madeiros, R.R. Bessette, R.R Reeve,, J.B. Lakeman, A. Rose and D. Browning
Type: Article
| 2008
Mass transport and flow dispersion in the compartments of a modular 10 cell filter-press stack - Carlos Ponce de León, Ian Whyte, Gavin W. Reade, Stewart E. Male and Frank C. Walsh
Type: Article
| 2008
| Item not available on this server.
The evolution of homogeneity on longitudinal sections during processing by ECAP - Michaela Prell, Cheng Xu and Terence G. Langdon
Type: Article
| 2008
| Item not available on this server.
Q
Residual stress and microstructure of as-deposited and annealed, sputtered yttria-stabilized zirconia thin films - David J. Quinn, Brian Wardle and S. Mark Spearing
Type: Article
| 2008
| Item not available on this server.
R
Mechanical properties of bulk nanocrystalline aluminum-tungsten alloys - K.V. Rajulapati, R.O. Scattergood, K.L. Murty, Z. Horita, T.G. Langdon and C.C. Koch
Type: Article
| 2008
| Item not available on this server.
Comparison of low cycle (notch) fatigue behaviour at temperature in single crystal turbine blade materials - P.A.S. Reed and M.D. Miller
Type: Conference or Workshop Item
| 2008
| Minerals, Metals and Materials Society
| Item not available on this server.
Combinatorial characterisation of mixed conducting perovskites - Jeremy C. H. Rossiny, Jennifer Julis, Sarah Fearn, John A. Kilner, Yong Zhang, Lifeng Chen, Shoufeng Yang and Julian R. G. Evans
Type: Article
| 2008
| Item not available on this server.
S
Impact of nitrate on bacterial structure and function in injection-water biofilms. - Carsten U. Schwermer, Gaute Lavik, Raeid M.M. Abed, Braden Dunsmore, Timothy G. Ferdelman, Paul Stoodley, Armin Gieseke and Dirk de Beer
Type: Article
| 2008
| Item not available on this server.
Functional ceramic materials database: an online resource for materials research - D. J. Scott, S. Manos, P. V. Coveney, J. C. H. Rossiny, S. Fearn, J. A. Kilner, R. C. Pullar, N. Mc N. Alford, A. -K. Axelsson, Y. Zhang, L. Chen, S. Yang, J. R. G. Evans and M. T. Sebastian
Type: Article
| 2008
| Item not available on this server.
An efficient beam element for the analysis of laminated composite beams of thin-walled open and closed cross sections - A.H. Sheikh and O.T. Thomsen
Type: Article
| 2008
| Item not available on this server.
Finite element and analytical modelling of crack closure due to repeated overloads - Konjengbam Darankumar Singh, Kern Hauw Khor and Ian Sinclair
Type: Article
| 2008
| Item not available on this server.
Some issues on finite element modelling of plasticity induced crack closure due to constant amplitude loading - Konjengbam Darunkumar Singh, Matthew Roger Parry and Ian Sinclair
Type: Article
| 2008
| Item not available on this server.
Comparative optimisation of first principles design methods with classification society rules for boat hull structures - A. Sobey, J.I.R. Blake and R.A. Shenoi
Type: Article
| 2008
Development of CFRP Class A body panels and structural components for automotive applications - Charlene Squires
Type: Thesis
| 2008
Effect of heat transfer on materials selection for bimaterial electrothermal actuators - P. Srinivasan and S. M. Spearing
Type: Article
| 2008
Optimal materials selection for bimaterial piezoelectric microactuators - P. Srinivasan and S.M. Spearing
Type: Article
| 2008
Materials selection for microsystems actuators - Prasanna Srinivasan
Type: Thesis
| 2008
Type: Conference or Workshop Item
| 2008
| Wiley-VCH Verlag
| Item not available on this server.
The strength of friction stir welded and friction stir processed aluminium alloys - M.J. Starink, A. Deschamps and S.C. Wang
Type: Article
| 2008
Thermal activation of fatigue crack growth: analysing the mechanisms of fatigue crack propagation in superalloys - M.J. Starink and P.A.S. Reed
Type: Article
| 2008
Shear deformation and texture evolution in Al alloys processed for one pass by ECAP - Marco J. Starink, Shun Cai Wang, Xiao Guang Qiao, Nong Gao, Hans J. Roven and Terence G. Langdon
Type: Article
| 2008
| Item availability restricted.
Direct demonstration of viable Staphylococcus aureus biofilms in an infected total joint arthroplasty: a case report - Paul Stoodley, Laura Nistico, Sandra Johnson, Leslie-Anne Lasko, Mark Baratz, Vikram Gahlot, Garth D. Ehrlich and Sandeep Kathju
Type: Article
| 2008
| Item not available on this server.
Biofilm plaque and hydrodynamic effects on mass transfer, fluoride delivery and caries. - Paul Stoodley, James Wefel, Armin Gieseke, Dirk de Beer and Christiane von Ohle
Type: Article
| 2008
| Item not available on this server.
Identification of heterogeneous constitutive parameters in a welded specimen: uniform stress and virtual fields methods for material property estimation - M.A. Sutton, J.H. Yan, S. Avril, F. Pierron and S.M. Adeeb
Type: Article
| 2008
| Item not available on this server.
The limiting current for reduction of ferricyanide ion at nickel: the importance of experimental conditions - D.A. Szánto, S. Cleghorn, C. Ponce de León and F.C. Walsh
Type: Article
| 2008
T
Abrasion-corrosion of downhole drill tool components - Mandar Rajiv Thakare
Type: Thesis
| 2008
The use of electrolyte redox potential to monitor the Ce(IV)/Ce(III) couple - P. Trinidad, C. Ponce de León and F.C. Walsh
Type: Article
| 2008
Accurate characterization of wafer bond toughness with the double cantilever specimen - Kevin Thomas Turner and S. Mark Spearing
Type: Article
| 2008
| Item availability restricted.
V
On the feasibility of using a continuous processing technique incorporating a limited strain imposed by ECAP - K. Venkateswarlu, Mainak Ghosh, A.K. Ray, Cheng Xu and Terence G. Langdon
Type: Article
| 2008
| Item not available on this server.
W
Electrochemical characterisation of porosity and corrosion resistance in electrodeposited metal coatings - F.C. Walsh, C. Ponce de León, C, Kerr, S. Court and B.D. Barker
Type: Article
| 2008
Tribocorrosion damage of a Jethete M152 type stainless steel - S.C. Wang, S. Quinn, M.J. Starink, R.J.K. Wood and J.A. Wharton
Type: Article
| 2008
Texture evolution by shear on two planes during ECAP
of a high strength aluminium alloy - S.C. Wang, M.J. Starink, N. Gao, X. Qiao, C. Xu and T.G. Langdon
Type: Article
| 2008
Type: Conference or Workshop Item
| 2008
| Item not available on this server.
The influence of nickel-aluminium bronze microstructure and crevice colution on the initiation of crevice corrosion - J.A. Wharton and K.R. Stokes
Type: Article
| 2008
| Item not available on this server.
Ultra high resolution computed tomography of damage in notched carbon fiber-epoxy composites - Peter Wright, X. Fu, I. Sinclair and S.M. Spearing
Type: Article
| 2008
| Item availability restricted.
Effect of defects on load-carrying capability of fillet welded T-joints - Aihui Wu, B.G. Mellor and S. Syngellakis
Type: Article
| 2008
| Item not available on this server.
X
Effect of the mean strength on the endurance limit or the crack growth threshold and the associated probability distributions - J.-J. Xiong, R.A. Shenoi and Y. Zhang
Type: Article
| 2008
| Item not available on this server.
Integrated experimental schemes for bonded patch repairs to notched aluminium-alloy panels based on static and fatigue strength concepts - J.J. Xiong and R.A. Shenoi
Type: Article
| 2008
| Item not available on this server.
A load history generation approach for full-scale accelerated fatigue tests - J.J. Xiong and R.A. Shenoi
Type: Article
| 2008
| Item not available on this server.
Evaluating the influence of pressure and torsional strain on processing by high-pressure torsion - Cheng Xu, Zenji Horita and Terence G. Langdon
Type: Article
| 2008
| Item not available on this server.
The evolution of homogeneity in an aluminum alloy processed using high-pressure torsion - Cheng Xu, Zenji Horita and Terence G. Langdon
Type: Article
| 2008
| Item not available on this server.
Superplastic behavior in ultrafine-grained materials produced by equal-channel angular pressing - Cheng Xu, Megumi Kawasaki, Roberto B. Figueiredo, Zhichao Duan and Terence G. Langdon
Type: Article
| 2008
| Item not available on this server.
Evaluating plastic anisotropy in two aluminum alloys processed by equal-channel angular pressing - Cheng Xu, Zoltán Száraz, Zuzana Trojanová, Pavel Lukáč and Terence G. Langdon
Type: Article
| 2008
| Item not available on this server.
Factors influencing the development of homogeneity in disks processed by high-pressure torsion - Cheng Xu, Alexander P. Zhilyaev, Zenji Horita and Terence G. Langdon
Type: Article
| 2008
| Item not available on this server.
Y
Dissolution characteristics of extrusion freeformed hydroxyapatite-tricalcium phosphate scaffolds - H.Y. Yang, I. Thompson, S.F. Yang, X.P. Chi, J.R.G. Evans and R.J. Cook
Type: Article
| 2008
| Item not available on this server.
Sintering behaviour of calcium phosphate filaments for use as hard tissue scaffolds - H.Y. Yang, S.F. Yang, X.P. Chi, J.R.G. Evans, I. Thompson, R.J. Cook and P. Robinson
Type: Article
| 2008
| Item not available on this server.
A novel solid freeforming method using simultaneous part and mould construction - S. Yang, M. M. Mohebi and J. R. G. Evans
Type: Article
| 2008
| Item not available on this server.
Rapid prototyping of ceramic lattices for hard tissue scaffolds - Shoufeng Yang, Hongyi Yang, Xiaopeng Chi, Julian R.G. Evans, Ian Thompson, Richard J. Cook and Paul Robinson
Type: Article
| 2008
| Item not available on this server.
Analysis of gas diffusion layer and flow-field design in a PEMFC using neutron radiography - Koudai Yoshizawa, Keigo Ikezoe, Yutaka Tasaki, Denis Kramer, Eberhard Lehmann and Günther Scherer
Type: Article
| 2008
| Item not available on this server.
Z
Type: Article
| 2008
| Item not available on this server.
Shape changes during the drying of droplets of suspensions - Y. Zhang, S. Yang, L. Chen and J.R.G. Evans
Type: Article
| 2008
| Item not available on this server.
Revisiting Hume-Rothery's Rules with artificial neural networks - Y.M. Zhang, S. Yang and J.R.G. Evans
Type: Article
| 2008
| Item not available on this server.
Microstructure and properties of pure titanium processed by equal-channel angular pressing at room temperature - Xicheng Zhao, Wenjie Fu, Xirong Yang and Terence G. Langdon
Type: Article
| 2008
| Item not available on this server.
Tougher ultrafine grain Cu via high-angle grain boundaries and low dislocation density - Y.H. Zhao, J.F. Bingert, Y.T. Zhu, X.Z. Liao, R.Z. Valiev, Z. Horita, T.G. Langdon, Y.Z Zhou and E.J. Lavernia
Type: Article
| 2008
| Item not available on this server.
Influence of specimen dimensions on the tensile behavior of ultrafine-grained Cu - Y.H. Zhao, Y.Z. Guo, Q. Wei, A.M. Dangelewicz, C. Xu, Y.T. Zhu, T.G. Langdon, Y.Z Zhou and E.J. Lavernia
Type: Article
| 2008
| Item not available on this server.
Evolution of defect structures during cold rolling of ultrafine-grained Cu and Cu-Zh alloys: influence of stacking fault energy - Y.H. Zhao, Z. Horita, T.G. Langdon and Y.T. Zhu
Type: Article
| 2008
| Item not available on this server.
Determining the optimal stacking fault energy for achieving high ductility in ultrafine-grained Cu-Zn alloys - Y.H. Zhao, X.Z. Liao, Z. Horita, T.G. Langdon and Y.T. Zhu
Type: Article
| 2008
| Item not available on this server.
Using high-pressure torsion for the cold-consolidation of copper chips produced by machining - A.P. Zhilyaev, A.A. Gimazov, G.I. Raab and T.G. Langdon
Type: Article
| 2008
| Item not available on this server.
Microstructural characteristics of nickel processed to ultrahigh strains by high-pressure torsion - A.P. Zhilyaev, A.A. Gimazov, E.P. Soshnikova, Á Révész and T.G. Langdon
Type: Article
| 2008
| Item not available on this server.
An evaluation of microstructure and microhardness in copper subjected to ultra-high strains - A.P. Zhilyaev, S. Swaminatham, A.A. Gimazov, T.R. McNelley and T.G. Langdon
Type: Article
| 2008
| Item not available on this server.
Using high-pressure torsion for metal processing: fundamentals and applications - Alexander P. Zhilyaev and Terence G. Langdon
Type: Article
| 2008
| Item not available on this server.
Age hardening and softening in cold-rolled Al-Mg-Mn alloys with up to 0.4wt%Cu - Z. Zhu and M.J. Starink
Type: Article
| 2008
Solution strengthening and age hardening capability of Al-Mg-Mn alloys with small additions of Cu - Z. Zhu and M.J. Starink
Type: Article
| 2008