Items where Division is "Current Faculties > Faculty of Engineering and Physical Sciences > School of Engineering > Mechanical Engineering
Mechanical Engineering" and Year is 2018
 | Up a level |
Number of items: 134.
Mechanical properties of an Al-Zn-Mg alloy processed by ECAP and heat treatments - Mohamed A. Afifi, Ying Chun Wang, Pedro H.R. Pereira, Yi Huang, Yangwei Wang, Xingwang Cheng, Shukui Li and Terence G. Langdon
Type: Article
| 2018
Effect of high-pressure torsion on microstructures, mechanical properties and corrosion resistance of cast pure Mg - Donya Ahmadkhaniha, Yi Huang, Matias Jaskari, Antti Järvenpää, Mahmoud Heydarzadeh Sohi, Caterina Zanella, L. Pentti Karjalainen and Terence G. Langdon
Type: Article
| 2018
Synthesis of self-organized nanostructured oxide for photocatalysis and photoelectrocatalysis application - Carlos Ponce de León Albarrán and Christiane De Arruda Rodrigues
Type: Book Section
| 2018
| Nova Science Publishers
| Item not available on this server.
Design guidelines for a direct drive transverse- flux tidal power generator - J.R. Anglada, S.M. Sharkh and M.A. Yuratich
Type: Conference or Workshop Item
| 2018
| IEEE
| Item not available on this server.
Morphological and chemical evidence for cyclic bone growth in a fossil hyaena - Jennifer Anné, Roy A. Wogelius, Nicholas P. Edwards, Arjen Van Veelen, Michael Buckley, William I. Sellers, Uwe Bergmann, Dimosthenis Sokaras, Roberto Alonso-Mori, Virginia L. Harvey, Victoria M. Egerton and Phillip L. Manning
Type: Article
| 2018
| Item not available on this server.
An evaluation and comparison of cross-sensitivities of various different types of screen printed Ag/AgCl reference electrodes - John K. Atkinson
Type: Conference or Workshop Item
| 2018
| IEEE
| Item not available on this server.
The effect of micro-abrasion on enamel using abrasive slurries - Mahdiyyah Baig, Richard Cook, Jonathan Pratten and Robert Wood
Type: Conference or Workshop Item
| 2018
| Item not available on this server.
Image-based high strain-rate testing for the characterization of viscoplasticity - Pascal Bouda, Bertrand Langrand, Delphine Notta-Cuvier, Eric Markiewicz and Fabrice Pierron
Type: Conference or Workshop Item
| 2018
| EDP Sciences
Optimization of an image-based experimental setup for the dynamic behaviour characterization of materials - Pascal Bouda, Delphine Notta-Cuvier, Bertrand Langrand, Eric Markiewicz and Fabrice Pierron
Type: Conference or Workshop Item
| 2018
| Springer
| Item not available on this server.
Investigating the effects of simulated prosthetic loading on lymphatic activity of healthy lower limb tissues - Jennifer, Louise Bramley, Alexander Dickinson, Luciana Bostan, Daniel Bader and Peter Worsley
Type: Conference or Workshop Item
| 2018
A measurement array to assess prosthesis-limb interface pressures which avoid soft tissue damage - Jennifer, Louise Bramley, Alexander Dickinson, Luciana Bostan, Chris Everitt, Angela Darekar, Daniel Bader and Peter Worsley
Type: Conference or Workshop Item
| 2018
Investigating the biomechanical and physiological effects of simulated prosthetic loading on healthy lower limb tissues - Jennifer, Louise Bramley, Peter Worsley, Luciana Bostan, Angela Darekar, Chris Everitt, Daniel Bader and Alexander Dickinson
Type: Conference or Workshop Item
| 2018
Exploring the potential of neutron imaging for life sciences on IMAT - G. Burca, S. Nagella, Thomas, James Clark, D. Tasev, I.A. Rahman, R.J. Garwood, A.R.T. Spencer, M.J. Turner and J.F. Kelleher
Type: Article
| 2018
Phase stability effects on hydrogen embrittlement resistance in martensite–reverted austenite steels - B.C. Cameron, M. Koyama and C. Cem Tasan
Type: Article
| 2018
| Item not available on this server.
Proportional fairness in wireless powered CSMA/CA based IoT networks - Xiaomin Chen, Zhan Shu, Kezhi Wang, Fangmin Xu and Yue Cao
Type: Conference or Workshop Item
| 2018
| Item not available on this server.
Liquid biofuels production and emissions performance in gas turbines: a review - Meng Choung Chiong, Cheng Tung Chong, Jo Han Ng, Su Shiung Lam, Manh Vu Tran, William Woei Fong Chong, Mohammad Nazri Mohd Jaafar and Agustin Valera-Medina
Type: Review
| 2018
| Item not available on this server.
Combustion and emission performances of coconut, palm and soybean methyl esters under reacting spray flame conditions - Meng Choung Chiong, Cheng Tung Chong, Jo Han Ng, Manh Vu Tran, Su Shiung Lam, Agustin Valera-Medina and Mohammad Nazri Mohd Jaafar
Type: Article
| 2018
| Item not available on this server.
Computational investigation of ripple dynamics in biofilms in flowing systems - N.G. Cogan, J. Li, S. Fabbri and P. Stoodley
Type: Article
| 2018
The effect of root exudates on rhizosphere water dynamics - Laura Cooper, K. Daly, P.D. Hallett, Nicolai Koebernick, T.S. George and Tiina Roose
Type: Article
| 2018
The influence of iodate ion additions to the bath on the deposition of electroless nickel on mild steel - S. Court, C. Kerr, C. Ponce de León, B. D. Barker, J. R. Smith and F. C. Walsh
Type: Article
| 2018
Stability of retained austenite in martensitic high carbon steels. Part I: Thermal stability - Wen Cui, David San-Martín and Pedro E.J. Rivera-Díaz-del-Castillo
Type: Article
| 2018
| Item not available on this server.
Inertial impact tests to identify the plastic properties of metals - Frances Davis, Lloyd Fletcher and Fabrice Pierron
Type: Conference or Workshop Item
| 2018
| EDP Sciences
Long-duration blast response of steel columns & the influence of section orientation - CFD as a load characterisation tool - Jack Denny and Simon Clubley
Type: Conference or Workshop Item
| 2018
| Item not available on this server.
The predictive capacity of Eulerian CFD to model long-duration blast loads on finite geometries - Jack Denny and Simon Clubley
Type: Conference or Workshop Item
| 2018
| Item not available on this server.
The capability of shock tubes to simulate primary blast injury loading - Jack Denny, Alexander Dickinson and Richard Critchley
Type: Conference or Workshop Item
| 2018
| Item not available on this server.
Assessing and benchmarking low cost 3D scanners for transtibial prosthetic socket design - Alexander Dickinson, Margaret Donovan-Hall, Samedy Srors, Ky Bou, Auntouch Tech, Joshua Steer, Cheryl Metcalf, Sisary Kheng and Peter Worsley
Type: Conference or Workshop Item
| 2018
Implementation of a DC current sensing transformer with H-bridge MOSFET rectifier in a resonant LLC converter - Borislav Dimitrov, Suleiman Sharkh, Andrew Cruden and Iosko Balabozov
Type: Conference or Workshop Item
| 2018
| IEEE
| Item not available on this server.
Valve timing optimisation of a spark ignition engine with skip cycle strategy - Baris Dogru, Roberto Lot and K.K.J Ranga Dinesh
Type: Article
| 2018
A study of white etching crack bearing failure detection using electrostatic sensing in wind turbine gearboxes - Kamran Esmaeili, Ling Wang, Terence Harvey, Neil White, Walter Holweger, M. Zuercher and E. Schlücker
Type: Article
| 2018
Type: Dataset
| 2018
| University of Southampton
C.H.A.D.: Continuous heterogenous assay in droplets for the measurement of cortisol - Gareth, William Harry Evans, Wahida, Taskin Bhuiyan, Sammer-Ul Hassan, Brett Warren, Sharon Coleman and Xize Niu
Type: Conference or Workshop Item
| 2018
| Item not available on this server.
A marine biofilm flow cell for in situ screening marine fouling control coatings using optical coherence tomography - Stefania Fabbri, Simon Dennington, Clayton Price, Paul Stoodley and Jennifer, Elise Longyear
Type: Article
| 2018
Type: Thesis
| 2018
| University of Southampton
Back-end-of-line a-SiOxCy:H dielectrics for resistive memory - Junqing Fan, Omesh Kapur, Ruomeng Huang, Sean W. King, Cornelis De Groot and Liudi Jiang
Type: Article
| 2018
Type: Dataset
| 2018
| University of Southampton
Micromachined nanocrystalline graphite membranes for gas separation - S.J. Fishlock, Suan-Hui Pu, G. Bhattacharya, Y. Han, J. McLaughlin, J.W. McBride, H.M.H. Chong and S.J. O'Shea
Type: Article
| 2018
Adaptive driver modelling in ADAS to improve user acceptance: a study using naturalistic data - James Fleming, Craig Allison, Xingda Yan, Neville Stanton and Roberto Lot
Type: Article
| 2018
Stochastic MPC for additive and multiplicative uncertainty using sample approximations - James Fleming and Mark Cannon
Type: Article
| 2018
Driver modeling and implementation of a fuel-saving ADAS - James Fleming, Xingda Yan, Craig Allison, Neville Stanton and Roberto Lot
Type: Conference or Workshop Item
| 2018
| IEEE
An image-based approach for measuring dynamic fracture toughness - Lloyd Fletcher, Leslie Lamberson and Fabrice Pierron
Type: Conference or Workshop Item
| 2018
| Springer
| Item not available on this server.
An Image-Based Inertial Impact (IBII) test for tungsten carbide cermets - Lloyd Fletcher and Fabrice Pierron
Type: Article
| 2018
An image-based inertial impact test for the high strain rate properties of brittle materials - Lloyd Fletcher and Fabrice Pierron
Type: Conference or Workshop Item
| 2018
| Springer
| Item not available on this server.
An image-cased impact test for the high strain rate tensile properties of brittle materials - Lloyd Fletcher and Fabrice Pierron
Type: Conference or Workshop Item
| 2018
| EDP Sciences
Image-based high strain rate testing of orthopaedic bone cement - Lloyd Fletcher, Xavier Regal, Rian Seghir, Fabrice Pierron and Martin Browne
Type: Conference or Workshop Item
| 2018
| EDP Sciences
All UK electricity supplied by wind and photovoltaics – The 30–30 rule - Aikaterini Fragaki, Tom Markvart and Georgios Laskos
Type: Article
| 2018
A unified theory for microstructural alterations in bearing steels under rolling contact fatigue - Hanwei Fu and Pedro E.J. Rivera-Díaz-del-Castillo
Type: Article
| 2018
A microstructure sensitive model for deformation of Ti-6Al-4V describing cast-and-wrought and additive manufacturing morphologies - M.A. Galindo-Fernández, K. Mumtaz, P.E.J. Rivera-Díaz-del-Castillo, E.I. Galindo-Nava and H. Ghadbeigi
Type: Article
| 2018
Interlayer coupling in twisted MoS2/WS2 Van der Waals heterostructures - Y. Galvão Gobato, G.A. Prando, A.D. Rodrigues, M. Henini, H. Wang, T. Polcar, D.W. Hewak and C.C. Huang
Type: Conference or Workshop Item
| 2018
A 3D printed bilayer oral solid dosage form combining metformin for prolonged and glimepiride for immediate drug delivery - Christos I. Gioumouxouzis, Apostolos Baklavaridis, Orestis L. Katsamenis, Catherine K. Markopoulou, Nikolaos Bouropoulos, Dimitrios Tzetzis and Dimitrios G. Fatouros
Type: Article
| 2018
| Item availability restricted.
IBII test for high strain rate tensile testing of adhesives - A. Guigue, L. Fletcher, R. Seghir and F. Pierron
Type: Conference or Workshop Item
| 2018
| Springer
| Item not available on this server.
Experimental and DFT insights of the Zn-doping effects on the visible-light photocatalytic water splitting and dye decomposition over Zn-doped BiOBr photocatalysts - Junqiu Guo, Zheng Jiang, Xin Liao, Ming-Hsien Lee, Geoffrey Hyett, Chung-Che Huang, Daniel Hewak, Sakellaris Mailis, Wei Zhou and Zheng Jiang
Type: Article
| 2018
Nano-tribological characterisation of palm oil-based trimethylolpropane ester for application as boundary lubricant - S. H. Hamdan, W.W.F. Chong, J.H. Ng, C.T. Chong and H. Zhang
Type: Article
| 2018
| Item not available on this server.
Multi-scale friction modelling of lubricant-surface interaction in tribological contacts - Siti Hartini binti Hamdan
Type: Thesis
| 2018
| University of Southampton
Design of multi-link transmission for bottom-drive fast press - Liu Hao, Li Menglei, Li Fuxing, Wu Dan, Xiao Maohua and Gao Nong
Type: Article
| 2018
| Item not available on this server.
Micromachined optical flow cell for sensitive measurement of droplets in tubing - Sammer-Ul Hassan, Adrian Nightingale and Xize Niu
Type: Article
| 2018
Type: Article
| 2018
Comparison of PM and hybrid excited machines for marine vessel hybrid-electric propulsion - Mehdi Hendijanizadeh, Suleiman Sharkh and A. Ali Qazalbash
Type: Book Section
| 2018
| IEEE
Non-uniform corrosion prediction of stiffened plates due to interactions with mechanical stresses - Eko Charnius Ilman, Julian Wharton, Yikun Wang and Adam Sobey
Type: Conference or Workshop Item
| 2018
| ASRANet
| Item availability restricted.
Revealing the heterogeneity in weld microstructures using the thermomechanical dissipative heat source - Palaniappan Jaya Seelan
Type: Thesis
| 2018
| University of Southampton
Understanding the factors controlling rolling contact fatigue damage in VIM-VAR M50 steel - J. Jelita Rydel, I. Toda-Caraballo, G. Guetard and P. E.J. Rivera-Díaz-del-Castillo
Type: Article
| 2018
| Item not available on this server.
Synthesis and photoelectrocatalytic performance of Sb2S3 nanorods from natural stibnite - Si Qi Jia, Zheng Jiang, Li Na Chi, Ying Ye and Shuang Shuang Hu
Type: Article
| 2018
| Item availability restricted.
A diffusion-based approach for modelling crack tip behaviour under fatigue-oxidation conditions - R. J. Kashinga, L. G. Zhao, V. V. Silberschmidt, R. Jiang and P. A.S. Reed
Type: Article
| 2018
Fabrication of nanocomposites through diffusion bonding under high-pressure torsion - Megumi Kawasaki, Jae Kyung Han, Dong Hyun Lee, Jae il Jang and Terence G. Langdon
Type: Article
| 2018
Application of the Virtual Fields Method to determine dynamic properties at intermediate strain rates - J. H. Kim, J. S. Park, F. Barlat and F. Pierron
Type: Article
| 2018
Small airways disease in mild and moderate chronic obstructive pulmonary disease: a cross-sectional study - Hyun-Kyoung Koo, Dragos M. Vasilescu, Steven Booth, Aileen Hsieh, Orestis L. Katsamenis, Nick Fishbane, W. Mark Elliott, Miranda Kirby, Peter Lackie, Ian Sinclair, Jane A. Warner, Joel D. Cooper, Harvey O. Coxson, Peter D. Pare, James C. Hogg and Tillie-Louise Hackett
Type: Article
| 2018
Developments in superplasticity over the last three decades with emphasis on research in Ufa - Terence Langdon
Type: Article
| 2018
Condition monitoring and predictive modelling of coating delamination applied to remote stationary and mobile assets - Jawwad Latif, Zulfiqar Ahmad Khan, Mian H. Nazir, Keith Stokes and Joseph Plummer
Type: Article
| 2018
| Item not available on this server.
In-vitro efficacy of antibiotics released from calcium sulfate bone void filler beads - Phillip A. Laycock, John J. Cooper, Robert P. Howlin, Craig Delury and Paul Stoodley
Type: Article
| 2018
Effects of micron scale surface profiles on acoustic streaming - Junjun Lei, Martyn Hill, Carlos Ponce De Leon Albarran and Peter Glynne-Jones
Type: Article
| 2018
Type: Article
| 2018
Type: Book Section
| 2018
| Springer
Evaluation of reconstruction and segmentation techniques on high temporal resolution μCT scans for geotechnical applications - K. Liu, F. A. Loveridge, R. Boardman and W. Powrie
Type: Conference or Workshop Item
| 2018
| Springer
| Item availability restricted.
Observation of thermally driven water flow in soils via micro-focus X-ray Computed Tomography - Kui Liu, Richard Boardman, Fleur Loveridge and William Powrie
Type: Conference or Workshop Item
| 2018
Multi-instrument multi-scale experimental damage mechanics for fibre reinforced composites - Stepan V. Lomov, Christian Breite, Delphine Carrella-Payan, Valter Carvelli, Nuri Ersoy, Marco Gigliotti, Raquel Antoranz Gonzalez, Sergey Ivanov, Malika Kersani, Marie Christine Lafarie-Frenot, Mark Mavrogordato, Mahoor Mehdikhani, Arsen Melnikov, Francisco Mesquita, Fatih Oz, Yannick Pannier, Lincy Pyl, Erich Schöberl, Ian Sinclair, S. Mark Spearing, Yentl Swolfs, Danny Van Hemelrijk, Man Zhu and Larissa Gorbatikh
Type: Article
| 2018
Type: Article
| 2018
Protection and acid resistivity of bioactive-glasses, arginine and calcium silicate - Behrad Mahmoodi, Robert Wood and Richard Cook
Type: Conference or Workshop Item
| 2018
| Item not available on this server.
Type: Dataset
| 2018
| University of Southampton
Computational design of light and strong high entropy alloys (HEA): obtainment of an extremely high specific solid solution hardening - Edern Menou, Franck Tancret, Isaac Toda-Caraballo, Gérard Ramstein, Philippe Castany, Emmanuel Bertrand, Nicolas Gautier and Pedro Eduardo Jose Rivera Díaz-Del-Castillo
Type: Article
| 2018
| Item not available on this server.
Evolutionary design of strong and stable high entropy alloys using multi-objective optimisation based on physical models, statistics and thermodynamics - Edern Menou, Isaac Toda-Caraballo, Pedro Eduardo Jose Rivera-Díaz-del-Castillo, Camille Pineau, Emmanuel Bertrand, Gérard Ramstein and Franck Tancret
Type: Article
| 2018
| Item not available on this server.
Effect of the addition of Si into V2O5 coatings: Structure and tribo-mechanical properties - Roberto Mirabal-Rojas, Sandra E. Rodil, Giovanni Ramirez, Tomas Polcar, Enrique Camps and Ali Erdemir
Type: Article
| 2018
Kinetic study of horse manure through thermogravimetric analysis - Guo Ren Mong, Jo Han Ng, William Woei Fong Chong, Farid Nasir Ani, Su Shiung Lam and Cheng Tung Chong
Type: Article
| 2018
| Item not available on this server.
Mechanisms of encrustation within ureteral stents - Ali Mosayyebi
Type: Thesis
| 2018
| University of Southampton
Exploring the use of tomography for the quantification of cementum growth patterns across the mammal phylogeny - Elis Newham
Type: Thesis
| 2018
| University of Southampton
The influence of miniscrew insertion torque - Melissa V. Nguyen, John Codrington, Lloyd Fletcher, Craig W. Dreyer and Wayne J. Sampson
Type: Article
| 2018
| Item not available on this server.
Gas-mediated crosstalk in droplet flow – characterisation and correction - Adrian Nightingale, Sammer-Ul Hassan, Gareth, William Harry Evans, Sharon Coleman and Xize Niu
Type: Conference or Workshop Item
| 2018
| Item not available on this server.
Impact of single and double zincating treatment on adhesion of electrodeposited nickel coating on aluminium alloy 7075 - Intan Othman, Marco Starink and Shuncai Wang
Type: Article
| 2018
The role of PEG-40-stearate in the production, morphology and stability of microbubbles - Joshua Owen, Sukanta Kamila, Shamit Shrivastava, Dario Carugo, Jorge Bernardino de la Serna, Christophoros Mannaris, Valerio Pereno, Richard J. Browning, Estelle Beguin, Anthony Patrick McHale, John F. Callan and Eleanor Stride
Type: Article
| 2018
Effect of blade curvature on the hemolytic and hydraulic characteristics of a centrifugal blood pump - Caglar Ozturk, I. Basar Aka and Ismail Lazoglu
Type: Article
| 2018
| Item not available on this server.
Streptococcus mutans yidC1 and yidC2 impact cell-envelope biogenesis, biofilm matrix and biophysical properties - Sara R. Palmer, Zhi Ren, Geelsu Hwang, Yuan Liu, Ashton Combs, Bill Sönderström, Patricia Lara Vasquez, Yalda Khosravi, L. Jeannine Brady, Hyun Koo and Paul Stoodley
Type: Article
| 2018
Factorial study of diesel engine oil contamination effects on steel and ceramic sliding contacts - Ramkumar Penchaliah, Terence Harvey, Robert Wood, David Woods, Susan Lewis and Andrew Rose
Type: Article
| 2018
Investigating the use of phase-change materials for temperature control during fast filling of hydrogen cylinders - Vishagen Ramasamy, Edward S. Richardson, Philippa Reed, Warren Hepples and Andrew Wheeler
Type: Article
| 2018
| Item availability restricted.
Nano-crystalline graphite for reliability improvement in MEM relay contacts - Sunil Rana, Jamie D. Reynolds, Ting Y. Ling, Muhammad S. Shamsudin, Suan H. Pu, Harold M.H. Chong and Dinesh Pamunuwa
Type: Article
| 2018
Strengthening mechanisms in high-entropy alloys: perspectives for alloy design - Pedro E.J. Rivera-Díaz-Del-Castillo and Hanwei Fu
Type: Review
| 2018
| Item not available on this server.
A study on microstructural alterations in white etching cracks, dark etching region, and white etching bands in rolling contacts - Viktorija Rumpf
Type: Thesis
| 2018
| University of Southampton
Type: Dataset
| 2018
| University of Southampton
Understanding the charge storage mechanism of conductive polymers as hybrid battery-capacitor material in ionic liquids by in-situ atomic force microscopy and electrochemical quartz crystal microbalance - Theresa Schoetz, Mario Kurniawan, Michael Stich, Ralf Peipmann, Igor Efimov, Adriana Ispas, Andreas Bund, Carlos Ponce De Leon Albarran and Mikito Ueda
Type: Article
| 2018
Analysis of through-thickness thermal conductivity of wind turbine blade CFRP materials - Evangelos Senis, Igor O. Golosnoy, Ole Thomsen and Janice Barton
Type: Conference or Workshop Item
| 2018
Assessing the dispersion of nanoinclusions in nanoreinforced CFRP laminates using electrical resistance measurements - Evangelos C. Senis, Igor O. Golosnoy, Janice M. Dulieu-Barton and Ole T. Thomsen
Type: Conference or Workshop Item
| 2018
| Applied Mechanics Laboratory, University of Patras
Shape memory characteristics of a nanocrystalline TiNi alloy processed by HPT followed by post-deformation annealing - Hamed Shahmir, Mahmoud Nili-Ahmadabadi, Yi Huang, Jai Myun Jung, Hyoung Seop Kim and Terence G. Langdon
Type: Article
| 2018
A durable, screen-printed sensor for in-situ and real-time monitoring of concrete's electrical resistivity suitable for smart buildings cities and IoT - Marios Sophocleous, Pericles Savva, Michael F. Petrou, John Atkinson and Julius Georgiou
Type: Article
| 2018
Evolution of long-period stacking ordered structure and hardness of Mg-8.2Gd-3.8Y-1.0Zn-0.4Zr alloy during processing by high pressure torsion - Wanting Sun, Xiaoguang Qiao, M.Y. Zheng, Nan Hu, Nong Gao and Marco Starink
Type: Article
| 2018
Type: Conference or Workshop Item
| 2018
| Springer
| Item not available on this server.
Analysis of microvascular blood flow and oxygenation: Discrimination between two haemodynamic steady states using nonlinear measures and multiscale analysis - Marjola Thanaj, Andrew J. Chipperfield and Geraldine F. Clough
Type: Article
| 2018
Water-dielectric single electrode mode triboelectric nanogenerators for ocean wave impact energy harvesting - Ulises Tronco Jurado, Suan-Hui Pu and Neil White
Type: Article
| 2018
Grain boundary carbides as hydrogen diffusion barrier in a Fe-Ni alloy: a thermal desorption and modelling study - Andrej Turk, David Bombač, Jakub Jelita Rydel, Maciej Ziętara, Pedro E.J. Rivera-Díaz-del-Castillo and Enrique I. Galindo-Nava
Type: Article
| 2018
| Item not available on this server.
Correlation between vanadium carbide size and hydrogen trapping in ferritic steel - Andrej Turk, David San Martín, Pedro E.J. Rivera-Díaz-del-Castillo and Enrique I. Galindo-Nava
Type: Article
| 2018
Extrusion-based 3D printing technologies for 3D scaffold engineering - Mohammad Vaezi, Gaoyan Zhong, Hamed Kalami and Shoufeng Yang
Type: Book Section
| 2018
| Elsevier
| Item not available on this server.
High-strain rate interlaminar shear testing of fibre-reinforced composites using an image-based inertial impact test - J. Van Blitterswyk, L. Fletcher and F. Pierron
Type: Conference or Workshop Item
| 2018
| Springer
| Item not available on this server.
Type: Dataset
| 2018
| University of Southampton
Image-based inertial impact test for composite interlaminar tensile properties - Jared Van Blitterswyk, Lloyd Fletcher and Fabrice Pierron
Type: Article
| 2018
The electrode kinetics of oxygen reduction: A case study. The corrosion of copper and its alloys in aqueous chloride solution at a smooth rotating disc electrode - Frank Walsh, Luis Fernando Arenas Martinez and Gareth Kear
Type: Book Section
| 2018
| Elsevier
| Item availability restricted.
Deliverable D4.1 Privacy by design models and tools: proof of concept - Stefanie Wiegand
Type: Monograph
| 2018
| SHIELD Consortium
Deliverable D4.2 Privacy by design models and tools: first full prototype plus documentation - Stefanie Wiegand
Type: Monograph
| 2018
| SHIELD Consortium
Designing a distributed prosthetics database for use in lower- and middle income countries - Stefanie Wiegand, Alexander Dickinson, Martin Hall-May, Tristan Aubrey-Jones and Mike Santer
Type: Conference or Workshop Item
| 2018
Accuracy of movement quality screening to document effects of neuromuscular control retraining exercises in a young ex-footballer with hip and groin symptoms: A proof of concept case study - David A. Wilson, Nadine Booysen, Paolo Dainese, Markus O. Heller, Maria Stokes and Martin B. Warner
Type: Article
| 2018
Reactive power sharing study of an islanded microgrid in DIgSILENT power factory - Yi Chyn Cassandra Wong, Mihai Rotaru, Chee Shen Lim and Andrew Cruden
Type: Conference or Workshop Item
| 2018
| Item availability restricted.
Microstructure evolution of Al-7wt%Si-2wt%Fe alloy processed by high-pressure torsion - Jittraporn Wongsa-Ngam, Chakkrist Phongphisutthinan and Terence G. Langdon
Type: Article
| 2018
Measuring orthotropic bending stiffness components of Pinus pinaster by the virtual fields method - José Xavier and Fabrice Pierron
Type: Article
| 2018
| Item not available on this server.
Effect of heat treatment process on mechanical properties and microstructure of FeAlCoCrNiTi0.5 alloy - Maohua Xiao, Jingwen Chen, Jingjing Kang, Ke Chen, Dan Wu and Nong Gao
Type: Article
| 2018
Study on the reliability of plugging and detaching fisheye contact - Maohua Xiao, Jun Guo, Xueyong Chen, Meng Xu, Meng Chen and Xiao Zhao
Type: Article
| 2018
| Item not available on this server.
Prediction of surface roughness and optimization of cutting parameters of stainless steel turning based on RSM - Maohua Xiao, Xiaojie Shen, You Ma, Fei Yang, Nong Gao, Weihua Wei and Dan Wu
Type: Article
| 2018
Research on fault feature extraction method of rolling bearing based on NMD and wavelet threshold denoising - Maohua Xiao, Kai Wen, Cunyi Zhang, Xiao Zhao, Weihua Wei and Dan Wu
Type: Article
| 2018
Type: Review
| 2018
Understanding the friction reduction mechanism based on molybdenum disulfide tribofilm formation and removal - Dichu Xu, Chun Wang, Cayetano Espejo, Jiugen Wang, Anne Neville and Ardian Morina
Type: Article
| 2018
| Item not available on this server.
A/C energy management and vehicle cabin thermal comfort control - Xingda Yan, James Fleming and Roberto Lot
Type: Article
| 2018
Extending the range of Plug-in Hybrid Electric Vehicles by CVT transmission optimal management - Xingda Yan, James Fleming and Roberto Lot
Type: Article
| 2018
Sampled-data control with adjustable switching frequency for DC-DC converters - Xingda Yan, Zhan Shu, Suleiman Sharkh, Zheng-Guang Wu and Michael Z. Q. Chen
Type: Article
| 2018
Mechanical response of a triply periodic minimal surface cellular structures manufactured by selective laser melting - Lei Yang, Chunze Yan, Changjun Han, Peng Chen, Shoufeng Yang and Yusheng Shi
Type: Article
| 2018
| Item not available on this server.
Oil-cooled thermoelectric energy harvesting for aero-engine sensing system - Bahareh Zaghari, Imran Bashir, Alexander Weddell, Neil White, Terry J. Harvey and Ling Wang
Type: Article
| 2018
Non-destructive 3D imaging and quantification of hydrated biofilm-sediment aggregates using X-ray micro-computed tomography - Naiyu Zhang, Charlotte E.L. Thompson, Ian H. Townend, Kathryn E. Rankin, David M. Paterson and Andrew J. Manning
Type: Article
| 2018
Grain refinement and superplastic flow in a fully lamellar Ti-6Al-4V alloy processed by high-pressure torsion - Wenjing Zhang, Hua Ding, Pedro H.R. Pereira, Yi Huang and Terence G. Langdon
Type: Article
| 2018
Design optimization approach of a large-scale moving framework for a large 5-axis machining center - Gaoyan Zhong, Ping Liu, Xinliang Mei, Yanqing Wang, Fang Xu and Shoufeng Yang
Type: Article
| 2018
Outstanding superhydrophobicity and corrosion resistance on carbon-based film surfaces coupled with multi-walled carbon nanotubes and nickel nano-particles - Shengguo Zhou, Xiaobo Zhu, Liqiu Ma, Qingqing Yan and Shuncai Wang
Type: Article
| 2018
| Item not available on this server.
Corrosion resistance and self-cleaning behaviour of Ni/a-C:H superhydrophobic films - Shengguo Zhou, Xiaobo Zhu, Qingqing Yan and Shuncai Wang
Type: Article
| 2018
| Item not available on this server.